Mechanistic studies of rat protein farnesyltransferase indicate an associative transition state

Protein farnesyltransferase is a zinc metalloenzyme that catalyzes the transfer of a 15-carbon farnesyl group to a conserved cysteine residue of a protein substrate. Both electrophilic and nucleophilic mechanisms have been proposed for this enzyme. In this work, we investigate the detailed catalytic mechanism of mammalian protein farnesyltransferase by measuring the effect of metal substitution and/or substrate alterations on the rate constant of the chemical step. Substitution of cadmium for the active site zinc enhances peptide affinity approximately 5-fold and decreases the rate constant for the formation of the thioether product approximately 6-fold, indicating changes in the metal-thiolate coordination in the catalytic transition state. In addition, the observed rate constant for product formation decreases for C3 fluoromethyl farnesyl pyrophosphate substrates, paralleling the number of fluorines at the C3 methyl position and indicating that a rate-contributing transition state has carbocation character. Magnesium ions do not affect the affinity of either the peptide or the isoprenoid substrate but specifically enhance the observed rate constant for product formation 700-fold, suggesting that magnesium coordinates and activates the diphosphate leaving group. These data suggest that FTase catalyzes protein farnesylation by an associative mechanism with an "exploded" transition state where the metal-bound peptide/protein sulfur has a partial negative charge, the C1 of FPP has a partial positive charge, and the bridge oxygen between C1 and the alpha phosphate of FPP has a partial negative charge. This proposed transition state suggests that stabilization of the developing charge on the carbocation and pyrophosphate oxygens is an important catalytic feature.     

Divalent cation and prenyl pyrophosphate specificities of the protein farnesyltransferase from rat brain, a zinc metalloenzyme.

The separate catalytic roles of Zn2+ and Mg2+ and the specificity of the prenyl pyrophosphate-binding site of the rat brain protein farnesyltransferase were explored using a purified enzyme preparation. The binding of p21Hras to the enzyme was abolished by dialysis against EDTA and restored by addition of ZnCl2, as demonstrated by chemical cross-linking. The binding of the other substrate, farnesyl pyrophosphate, was independent of divalent cations, as demonstrated by gel filtration. Transfer of the enzyme-bound farnesyl group to the bound p21Hras required Mg2+. Geranylgeranyl pyrophosphate bound to the prenyl pyrophosphate-binding site with an affinity equal to that of farnesyl pyrophosphate, but the geranylgeranyl group was not transferred efficiently to p21Hras. It also was not transferred to a modified p21Hras containing COOH-terminal leucine, a protein that was shown previously to be a good substrate for a rat brain geranylgeranyltransferase. We conclude that the protein farnesyltransferase is a metalloenzyme that most likely contains Zn2+ at the peptide-binding site. It thus resembles certain metallopeptidases, including carboxypeptidase A and the angiotensin-converting enzyme. Strategies previously developed to screen for inhibitors of those enzymes may aid in the search for inhibitors of the protein farnesyltransferase.     

Synthesis of imidazole-containing analogues of farnesyl pyrophosphate and evaluation of their biological activity on protein farnesyltransferase

With the aim of creating new bisubstrate inhibitors of protein farnesyltransferase (FTase), new carboxylic farnesyl pyrophosphate analogues have been designed and synthesized. The original structures are built around three elements: a prenyl moiety, a 1,4-diacid motif and an imidazole ring. All the compounds were evaluated for their ability to inhibit FTase and compared with the corresponding derivatives lacking the imidazole ring, synthesized for that purpose. These new compounds are not bisubstrate inhibitors probably because the imidazole ring is not in the right position to interact with the zinc atom. However these derivatives display FPP competitive inhibition with a good activity in the carboxylic farnesyl pyrophosphate analogues series.     

Farnesylation of nonpeptidic thiol compounds by protein farnesyltransferase

Protein farnesyltransferase catalyzes the modification of protein substrates containing specific carboxyl-terminal Ca(1)a(2)X motifs with a 15-carbon farnesyl group. The thioether linkage is formed between the cysteine of the Ca(1)a(2)X motif and C1 of the farnesyl group. Protein substrate specificity is essential to the function of the enzyme and has been exploited to find enzyme-specific inhibitors for antitumor therapies. In this work, we investigate the thiol substrate specificity of protein farnesyltransferase by demonstrating that a variety of nonpeptidic thiol compounds, including glutathione and dithiothreitol, are substrates. However, the binding energy of these thiols is decreased 4-6 kcal/mol compared to a peptide derived from the carboxyl terminus of H-Ras. Furthermore, for these thiol substrates, both the farnesylation rate constant and the apparent magnesium affinity decrease significantly. Surprisingly, no correlation is observed between the pH-independent log(k(max)) and the thiol pK(a); model nucleophilic reactions of thiols display a Br?nsted correlation of approximately 0.4. These data demonstrate that zinc-sulfur coordination is a primary criterion for classification as a FTase substrate, but other interactions between the peptide and the FTase.isoprenoid complex provide significant enhancement of binding and catalysis. Finally, these results suggest that the mechanism of FTase provides in vivo selectivity for the farnesylation of protein substrates even in the presence of high concentrations of intracellular thiols.     

Yeast protein farnesyltransferase. pKas of peptide substrates bound as zinc thiolates.

Protein farnesyltransferase (PFTase) is a zinc metalloenzyme that catalyzes the posttranslational alkylation of the cysteine in C-terminal -Ca(1)a(2)X sequences by a 15-carbon farnesyl residue, where C is cysteine, a(1) and a(2) are normally aliphatic amino acids, and X is an amino acid that specifies selectivity for the farnesyl moiety. Formation of a Zn(2+) thiolate in the PFTase. peptide complex was detected by the appearance of an absorbance at 236 nm (epsilon = 15 000 M(-1) cm(-1)), which was dependent on the concentration of peptide, in a UV difference spectrum in a solution of PFTase and the peptide substrate RTRCVIA. We developed a fluorescence anisotropy binding assay to measure the dissociation constants as a function of pH for peptide analogues by appending a 2',7'-difluorofluorescein to their N-terminus. The electron-withdrawing fluorine atoms allowed us to measure peptide binding down to pH 5.5 without having to correct for the changes in fluorescence intensity that accompany protonation of the fluorophore. Measurements of the pK(a)s for thiol groups in free and bound peptide indicate that peptide binding is accompanied by formation of a zinc thiolate and that binding to PFTase lowers the pK of the peptide thiol by 3 units. In similar studies with the betaY310F mutant, the pK(a) of the thiol moiety was lowered by 2 units upon binding, indicating that the hydroxyl group in the conserved tyrosine helps stabilize the bound thiolate.     

Evidence for trans-trans and cis-cis farnesyl pyrophosphate synthesis in Gossipium hirsutum

A protein fraction capable of catalysing the formation of all four geometrical isomers of farnesyl pyrophosphate has been isolated from cotton roots. Using neryl pyrophosphate and isopentenyl pyrophosphate as substrates the product was found to be cis-cis farnesyl pyrophosphate and possibly trans-cis farnesyl pyrophosphate. Geranyl pyrophosphate and isopentenyl pyrophosphate as substrates yielded trans-trans and possible cis-trans farnesyl pyrophosphate. During purification of the active protein fraction, the ratio of utilization of geranyl pyrophosphate and neryl pyrophosphate did not remain constant, indicating that two enzymes may be involved, one specific for cis C₁₀-substrate and the other for trans C₁₀-substrate.     

Pre-steady-state and stopped-flow fluorescence analysis of Escherichia coli ribonuclease III: insights into mechanism and conformational changes associated with binding and catalysis

To better understand substrate recognition and catalysis by RNase III, we examined steady-state and pre-steady-state reaction kinetics, and changes in intrinsic enzyme fluorescence. The multiple turnover cleavage of a model RNA substrate shows a pre-steady-state burst of product formation followed by a slower phase, indicating that the steady-state reaction rate is not limited by substrate cleavage. RNase III catalyzed hydrolysis is slower at low pH, permitting the use of pre-steady-state kinetics to measure the dissociation constant for formation of the enzyme-substrate complex (K(d)=5.4(+/-0.6) nM), and the rate constant for phosphodiester bond cleavage (k(c)=1.160(+/-0.001) min(-1), pH 5.4). Isotope incorporation analysis shows that a single solvent oxygen atom is incorporated into the 5' phosphate of the RNA product, which demonstrates that the cleavage step is irreversible. Analysis of the pH dependence of the single turnover rate constant, k(c), fits best to a model for two or more titratable groups with pK(a) of ca 5.6, suggesting a role for conserved acidic residues in catalysis. Additionally, we find that k(c) is dependent on the pK(a) value of the hydrated divalent metal ion included in the reaction, providing evidence for participation of a metal ion hydroxide in catalysis, potentially in developing the nucleophile for the hydrolysis reaction. In order to assess whether conformational changes also contribute to the enzyme mechanism, we monitored intrinsic tryptophan fluorescence. During a single round of binding and cleavage by the enzyme we detect a biphasic change in fluorescence. The rate of the initial increase in fluorescence was dependent on substrate concentration yielding a second-order rate constant of 1.0(+/-0.1)x10(8) M(-1) s(-1), while the rate constant of the second phase was concentration independent (6.4(+/-0.8) s(-1); pH 7.3). These data, together with the unique dependence of each phase on divalent metal ion identity and pH, support the hypothesis that the two fluorescence transitions, which we attribute to conformational changes, correlate with substrate binding and catalysis.     

Loss of enzyme activity during turnover of the Bacillus cereus β-lactamase catalysed hydrolysis of β-lactams due to loss of zinc ion

Metallo-beta-lactamases are zinc-ion-dependent and are known to exist either as mononuclear or as dinuclear enzymes. The kinetics and mechanism of hydrolysis of the native zinc Bacillus cereus metallo-beta-lactamase (BcII) have been investigated under pre-steady-state conditions at different pHs and zinc-ion concentrations. Biphasic kinetics are observed for the hydrolysis of cefuroxime and benzylpenicillin with submicromolar concentrations of enzyme and zinc. The initial burst of product formation far exceeds the concentration of enzyme and the subsequent slower rate of hydrolysis is attributed to a branched kinetic pathway. The pH and metal-ion dependence of the microscopic rate constants of this branching were determined, from which it is concluded that two enzyme species with different metal-to-enzyme stoichiometries are formed during catalytic turnover. The dizinc enzyme is responsible for the fast route but during the catalytic cycle it slowly loses the less tightly bound zinc ion via the branching route to give an inactive monozinc enzyme; the latter is only catalytic following the uptake of a second zinc ion. The rate constant for product formation from the dinuclear enzyme and the branching rate constant show a sigmoidal dependence on pH indicative of important ionizing groups with pK (a)s of 9.0 +/- 0.1 and 8.2 +/- 0.1, respectively. The rate constant for the regeneration of enzyme activity depends on zinc-ion concentration. This unusual behaviour is attributed to an intrinsic property of metallo hydrolytic enzymes that depend on a metal bound water both as a ligand for the second metal ion and as the nucleophile which is consumed during hydrolysis of the substrate and so has to be replaced to maintain the catalytic cycle.     

Insight into the activation mechanism of Escherichia coli octaprenyl pyrophosphate synthase derived from pre-steady-state kinetic analysis

Octaprenyl pyrophosphate synthase (OPPs) catalyzes the sequential condensation of five molecules of isopentenyl pyrophosphate with farnesyl pyrophosphate to generate all-trans C40-octaprenyl pyrophosphate, which constitutes the side chain of ubiquinone. Due to the slow product release, a long-chain polyprenyl pyrophosphate synthase often requires detergent or another factor for optimal activity. Our previous studies in examining the activity enhancement of Escherichia coli undecaprenyl pyrophosphate synthase have demonstrated a switch of the rate-determining step from product release to isopentenyl pyrophosphate (IPP) condensation reaction in the presence of Triton [12]. In order to understand the mechanism of enzyme activation for E. coli OPPs, a single-turnover reaction was performed and the measured IPP condensation rate (2 s(-1)) was 100 times larger than the steady-state rate (0.02 s(-1)). The high molecular weight fractions and Triton could accelerate the steady-state rate by 3-fold (0.06 s(-1)) but insufficient to cause full activation (100-fold). A burst product formation was observed in enzyme multiple turnovers indicating a slow product release.     

Kinetic and mutational analyses of the major cytosolic exopolyphosphatase from Saccharomyces cerevisiae

Yeast exopolyphosphatase (scPPX) processively splits off the terminal phosphate group from linear polyphosphates longer than pyrophosphate. scPPX belongs to the DHH phosphoesterase superfamily and is evolutionarily close to the well characterized family II pyrophosphatase (PPase). Here, we used steady-state kinetic and binding measurements to elucidate the metal cofactor requirement for scPPX catalysis over the pH range 4.2-9.5. A single tight binding site for Mg(2+) (K(d) of 24 microm) was detected by equilibrium dialysis. Steady-state kinetic analysis of tripolyphosphate hydrolysis revealed a second site that binds Mg(2+) in the millimolar range and modulates substrate binding. This step requires two protonated and two deprotonated enzyme groups with pK(a) values of 5.0-5.3 and 7.6-8.2, respectively. The catalytic step requiring two deprotonated groups (pK(a) of 4.6 and 5.6) is modulated by ionization of a third group (pK(a) of 8.7). Conservative mutations of Asp(127), His(148), His(149) (conserved in scPPX and PPase), and Asn(35) (His in PPase) reduced activity by a factor of 600-5000. N35H and D127E substitutions reduced the Mg(2+) affinity of the tight binding site by 25-60-fold. Contrary to expectations, the N35H variant was unable to hydrolyze pyrophosphate, but markedly altered metal cofactor specificity, displaying higher catalytic activity with Co(2+) bound to the weak binding site versus the Mg(2+)- or Mn(2+)-bound enzyme. These results provide an initial step toward understanding the dynamics of scPPX catalysis and reveal significant functional differences between structurally similar scPPX and family II PPase.     

Mutagenesis studies of protein farnesyltransferase implicate aspartate beta 352 as a magnesium ligand

Protein farnesyltransferase (FTase) catalyzes the addition of a farnesyl chain onto the sulfur of a C-terminal cysteine of a protein substrate. Magnesium ions enhance farnesylation catalyzed by FTase by several hundred-fold, with a KMg value of 4 mM. The magnesium ion is proposed to coordinate the diphosphate leaving group of farnesyldiphosphate (FPP) to stabilize the developing charge in the farnesylation transition state. Here we further investigate the magnesium binding site using mutagenesis and biochemical studies. Free FPP binds Mg2+ with a Kd of 120 microM. The 10-fold weaker affinity for Mg2+ observed for the FTase.FPP.peptide ternary complex is probably caused by the positive charges in the diphosphate binding pocket of FTase. Furthermore, mutation of aspartate beta 352 to alanine (D beta 352A) or lysine (D beta 352K) in FTase drastically alters the Mg2+ dependence of FTase catalysis without dramatically affecting the rate constant of farnesylation minus magnesium or the binding affinity of either substrate. In D beta 352A FTase, the KMg increases 28-fold to 110 +/- 30 mM, and the farnesylation rate constant at saturating Mg2+ decreases 27-fold to 0.30 +/- 0.05 s-1. Substitution of a lysine for Asp-beta 352 removes the magnesium activation of farnesylation catalyzed by FTase but does not significantly enhance the rate constant for farnesylation in the absence of Mg2+. In wild type FTase, Mg2+ can be replaced by Mn2+ with a 2-fold lower KMn (2 mM). These results suggest both that Mg2+ coordinates the side chain carboxylate of Asp-beta 352 and that the role of magnesium in the reaction includes positioning the FPP prior to catalysis.     

Structural basis for bisphosphonate-mediated inhibition of isoprenoid biosynthesis

Farnesyl pyrophosphate synthetase (FPPS) synthesizes farnesyl pyrophosphate through successive condensations of isopentyl pyrophosphate with dimethylallyl pyrophosphate and geranyl pyrophosphate. Nitrogen-containing bisphosphonate drugs used to treat osteoclast-mediated bone resorption and tumor-induced hypercalcemia are potent inhibitors of the enzyme. Here we present crystal structures of substrate and bisphosphonate complexes of FPPS. The structures reveal how enzyme conformational changes organize conserved active site residues to exploit metal-induced ionization and substrate positioning for catalysis. The structures further demonstrate how nitrogen-containing bisphosphonates mimic a carbocation intermediate to inhibit the enzyme. Together, these FPPS complexes provide a structural template for the design of novel inhibitors that may prove useful for the treatment of osteoporosis and other clinical indications including cancer.     

Positively charged side chains in protein farnesyltransferase enhance catalysis by stabilizing the formation of the diphosphate leaving group

Protein farnesyltransferase (FTase) requires both Zn(2+) and Mg(2+) for efficient catalysis of the formation of a thioether bond between carbon-1 of farnesyldiphosphate (FPP) and the cysteine thiolate contained in the carboxy-terminal CaaX sequence of target proteins. Millimolar concentrations of Mg(2+) accelerate catalysis by as much as 700-fold in FTase. Although FTase lacks a typical DDXXD Mg(2+) binding site found in other enzymes that use Mg(2+) for diphosphate stabilization, D352beta in FTase has been implicated in binding Mg(2+) (Pickett et al. (2003) J. Biol. Chem. 278, 51243). Structural studies demonstrate that the diphosphate (PPi) group of FPP resides in a binding pocket made up of highly positively charged side chains, including residues R291beta and K294beta, prior to formation of an active conformation. Analysis of the Mg(2+) dependence of FTase mutants demonstrates that these positively charged residues decrease the Mg(2+) affinity up to 40-fold. In addition, these residues enhance the farnesylation rate constant by almost 80-fold in the presence of Mg(2+), indicating that these residues are not simply displaced by Mg(2+) during the reaction. Mutations at R291beta increase the pK(a) observed in the magnesium affinity, suggesting that this arginine stabilizes the deprotonated form of the PPi leaving group. Furthermore, binding and catalysis data using farnesylmonophosphate (FMP) as a substrate indicate that the side chains of R291beta and K294beta interact mainly with the beta-phosphate of FPP during the chemical reaction. These results allow refinement of the model of the Mg(2+) binding site and demonstrate that positive charge stabilizes the developing charge on the diphosphate leaving group.     

Kinetic studies of protein farnesyltransferase mutants establish active substrate conformation

The zinc metalloenzyme protein farnesyltransferase (FTase) catalyzes the transfer of a 15-carbon farnesyl moiety from farnesyl diphosphate (FPP) to a cysteine residue near the C-terminus of a protein substrate. Several crystal structures of inactive FTase.FPP.peptide complexes indicate that K164alpha interacts with the alpha-phosphate and that H248beta and Y300beta form hydrogen bonds with the beta-phosphate of FPP [Strickland, C. L., et al. (1998) Biochemistry 37, 16601-16611]. Mutations K164Aalpha, H248Abeta, and Y300Fbeta were prepared and analyzed by single turnover kinetics and ligand binding studies. These mutations do not significantly affect the enzyme affinity for FPP but do decrease the farnesylation rate constant by 30-, 10-, and 500-fold, respectively. These mutations have little effect on the pH and magnesium dependence of the farnesylation rate constant, demonstrating that the side chains of K164alpha, Y300beta, and H248beta do not function either as general acid-base catalysts or as magnesium ligands. Mutation of H248beta and Y300beta, but not K164alpha, decreases the farnesylation rate constant using farnesyl monophosphate (FMP). These data suggest that, contrary to the conclusions derived from analysis of the static crystal structures, the transition state for farnesylation is stabilized by interactions between the alpha-phosphate of the isoprenoid substrate and the side chains of Y300beta and H248beta. These results suggest an active substrate conformation for FTase wherein the C1 carbon of the FPP substrate moves toward the zinc-bound thiolate of the protein substrate to react, resulting in a rearrangement of the diphosphate group relative to its ground state position in the binding pocket.     

Substrate binding mode and reaction mechanism of undecaprenyl pyrophosphate synthase deduced from crystallographic studies

Undecaprenyl pyrophosphate synthase (UPPs) catalyzes eight consecutive condensation reactions of farnesyl pyrophosphate (FPP) with isopentenyl pyrophosphate (IPP) to form a 55-carbon long-chain product. We previously reported the crystal structure of the apo-enzyme from Escherichia coli and the structure of UPPs in complex with sulfate ions (resembling pyrophosphate of substrate), Mg(2+), and two Triton molecules (product-like). In the present study, FPP substrate was soaked into the UPPs crystals, and the complex structure was solved. Based on the crystal structure, the pyrophosphate head group of FPP is bound to the backbone NHs of Gly29 and Arg30 as well as the side chains of Asn28, Arg30, and Arg39 through hydrogen bonds. His43 is close to the C2 carbon of FPP and may stabilize the farnesyl cation intermediate during catalysis. The hydrocarbon moiety of FPP is bound with hydrophobic amino acids including Leu85, Leu88, and Phe89, located on the alpha3 helix. The binding mode of FPP in cis-type UPPs is apparently different from that of trans-type and many other prenyltransferases which utilize Asprich motifs for substrate binding via Mg(2+). The new structure provides a plausible mechanism for the catalysis of UPPs.     

The crystal structure of human geranylgeranyl pyrophosphate synthase reveals a novel hexameric arrangement and inhibitory product binding

Modification of GTPases with isoprenoid molecules derived from geranylgeranyl pyrophosphate or farnesyl pyrophosphate is an essential requisite for cellular signaling pathways. The synthesis of these isoprenoids proceeds in mammals through the mevalonate pathway, and the final steps in the synthesis are catalyzed by the related enzymes farnesyl pyrophosphate synthase and geranylgeranyl pyrophosphate synthase. Both enzymes play crucial roles in cell survival, and inhibition of farnesyl pyrophosphate synthase by nitrogen-containing bisphosphonates is an established concept in the treatment of bone disorders such as osteoporosis or certain forms of cancer in bone. Here we report the crystal structure of human geranylgeranyl pyrophosphate synthase, the first mammalian ortholog to have its x-ray structure determined. It reveals that three dimers join together to form a propeller-bladed hexameric molecule with a mass of approximately 200 kDa. Structure-based sequence alignments predict this quaternary structure to be restricted to mammalian and insect orthologs, whereas fungal, bacterial, archaeal, and plant forms exhibit the dimeric organization also observed in farnesyl pyrophosphate synthase. Geranylgeranyl pyrophosphate derived from heterologous bacterial expression is tightly bound in a cavity distinct from the chain elongation site described for farnesyl pyrophosphate synthase. The structure most likely represents an inhibitory complex, which is further corroborated by steady-state kinetics, suggesting a possible feedback mechanism for regulating enzyme activity. Structural comparisons between members of this enzyme class give deeper insights into conserved features important for catalysis.     

Exploring the role and the binding affinity of a second zinc equivalent in B. cereus metallo-beta-lactamase

Metallo-beta-lactamases are a newly characterized family of zinc enzymes present in several pathogenic strains that represent an emerging clinical threat. Enzymes from different organisms exhibit an outstanding functional diversity, particularly in the metal ion requirements for activity. We have investigated the effect of the second zinc(II) equivalent in the enzyme betaLII from Bacillus cereus, naturally active in the mono-zinc(II) form. The enzyme is reversibly inactivated at low pH, due to dissociation of the two zinc(II) equivalents. The pH profile indicates that zinc-bound water in the mono-zinc(II) enzyme possesses a pK(a) below 4.9, indicating that a second zinc(II) equivalent is not needed for nucleophile activation. Instead, the second zinc(II) may contribute to properly anchor Asp120, that ultimately orients the attacking nucleophile in binuclear enzymes. This role may be fulfilled by Arg121 in mono-zinc enzymes, as suggested by the kinetic study of the R121C mutant in betaLII. In addition, it is demonstrated that Arg121 is not responsible for the low binding affinity of betaLII toward a second zinc(II) equivalent.     

Computational studies of the farnesyltransferase ternary complex part II: the conformational activation of farnesyldiphosphate

Studies aimed at elucidating the reaction mechanism of farnesyltransferase (FTase), which catalyzes the prenylation of many cellular signaling proteins including Ras, has been an active area of research. Much is known regarding substrate binding and the impact of various catalytic site residues on catalysis. However, the molecular level details regarding the conformational rearrangement of farnesyldiphosphate (FPP), which has been proposed via structural analysis and mutagenesis studies to occur prior to the chemical step, is still poorly understood. Following on our previous computational characterization of the resting state of the FTase ternary complex, the thermodynamics of the conformational rearrangement step in the absence of magnesium was investigated for the wild type FTase and the Y300Fbeta mutant complexed with the peptide CVIM. In addition, we also explored the target dependence of the conformational activation step by perturbing isoleucine into a leucine (CVLM). The calculated free energy profiles of the proposed conformational transition confirm the presence of a stable intermediate state, which was identified only when the diphosphate is monoprotonated (FPP2-). The farnesyl group in the computed intermediate state assumes a conformation similar to that of the product complex, particularly for the first two isoprene units. We found that Y300beta can readily form hydrogen bonds with either of the phosphates of FPP. Removing the hydroxyl group on Y300beta does not significantly alter the thermodynamics of the conformational transition, but shifts the location of the intermediate farther away from the nucleophile by 0.5 A, which suggests that Y300beta facilitate the reaction by stabilizing the chemical step. Our results also showed an increased transition barrier height for CVLM (1.5 kcal/mol higher than that of CVIM). Although qualitatively consistent with the findings from the recent kinetic isotope experiments by Fierke and co-workers, the magnitude is not large enough to affect the rate-limiting step.     

Squalene synthetase. Solubilization and partial purification of squalene synthetase, copurification of presqualene pyrophosphate and squalene synthetase activities

Squalene synthetase (farnesyldiphosphate:farnesyldiphosphate farnesyltransferase, EC 2.5.1.21) is an intrinsic microsomal protein that catalyzes the synthesis of squalene from farnesyl pyrophosphate via the intermediate presqualene pyrophosphate. We have solubilized this enzyme from yeast with a mixture of the detergents N-octyl beta-D-glucopyranoside and Lubrol PX. Approximately 50-fold purification of the solubilized activities has been achieved by chromatography on DEAE-cellulose and hydroxylapatite and by isoelectric focusing. The most highly purified preparation has one major band of protein with a molecular weight of 53,000 as estimated by electrophoresis under denaturing conditions. The enzyme may also have been modified by proteolysis during isolation since a 47,000 molecular weight species was also found. The two activities, presqualene pyrophosphate synthetase and squalene synthetase, copurified during isolation.     

Lactobacillus plantarum undecaprenyl pyrophosphate synthetase: purification and reaction requirements.

Undecaprenyl pyrophosphate synthetase was partially purified from Lactobacillus plantarum by DEAE-cellulose, hydroxyapatite, and Sephadex G-100 chromatography in Triton X-100. The enzyme has a molecular weight between 53,000 and 60,000. The enzyme demonstrated a fivefold preference for farnesyl pyrophosphate rather than geranyl pyrophosphate as the allylic cosubstrate, whereas dimethylallyl pyrophosphate was not effective as a substrate. Polyprenyl pyrophosphates obtained using either farnesyl or geranyl pyrophosphate as cosubstrate were chromatographically identical. Hydrolysis of these polyprenyl pyrophosphates with either a yeast or liver phosphatase preparation yielded undecaprenol as the major product. Incorporation of radioactive label from mixtures of Δ³-[1-¹⁴C]isopentenyl pyrophosphate and Δ³-2R-[2-³H]isopentenyl pyrophosphate into enzymic product indicated that each isoprene unit added to the allylic pyrophosphate substrate has a cis configuration about the newly formed double bond. The removal of detergent from enzyme solutions resulted in a parallel loss in enzyme activity when analyzed with either farnesyl or geranyl pyrophosphate as cosubstrates. Enzymic activity was restored on addition of Triton X-100 or deoxycholate. The enzyme exhibited a pH-activity profile with optima at pH 7.5 and 10.2. It also demonstrated a divalent cation requirement, with Mg²⁺, Mn²⁺, Zn²⁺, and Co²⁺ exhibiting comparable activities.