Production of laccase byCurvularia sp.

ACurvularia sp. isolated from soil was found to contain laccase activity toward guaiacol as substrate. The organism produced an extracellular laccase in a medium containing yeast extract, peptone and dextrose. Initial medium pH 4.0 and cultivation temperature 30°C were found to be most suitable for maximum enzyme production. The optimum pH and temperature for laccase activity were found to be 5.2 and 50°C, respectively. Under optimum conditions, the enzyme had aK _m (guaiacol) of 0.75 mmol/L and aV of 1.50 CU min⁻¹ ml⁻¹. Some divalent metal ions inhibited laccase activity at very low concentrations.     

Purification and characterization of laccase from <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis> and decolorization of an anthraquinone dye by the enzyme

The white rot fungus Pycnoporus sanguineus produced high amount of laccase in the basal liquid medium without induction. Laccase was purified using ultrafiltration, anion-exchange chromatography, and gel filtration. The molecular weight of the purified laccase was estimated as 61.4 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The enzyme oxidized typical substrates of laccases including 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonate), 2,6-dimethoxyphenol, and syringaldazine. The optimum pH and temperature for the purified laccase were 3.0 and 65°C, respectively. The enzyme was stable up to 40°C, and high laccase activity was maintained at pH 2.0–5.0. Sodium azide, l-cysteine, and dithiothreitol strongly inhibited the laccase activity. The purified enzyme efficiently decolorized Remazol Brilliant Blue R in the absence of added redox mediators. The high production of P. sanguineus laccase as well as its decolorization ability demonstrated its potential applications in dye decolorization.     

Characterization of alcohol dehydrogenase 1 and 3 from <Emphasis Type="Italic">Neurospora crassa</Emphasis> FGSC2489

Alcohol dehydrogenase (ADH) is a key enzyme in the production and utilization of alcohols. Some also catalyze the formation of carboxylate esters from alcohols and aldehydes. The ADH1 and ADH3 genes of Neurospora crassa FGSC2489 were cloned and expressed in recombinant Escherichia coli to investigate their alcohol dehydrogenation and carboxylate ester formation abilities. Homology analysis and sequence alignment of amino acid sequence indicated that ADH1 and ADH3 of N. crassa contained a zinc-binding consensus sequence and a NAD⁺-binding motif and showed 54–75% identity with fungi ADHs. N. crassa ADH1 was expressed in E. coli to give a specific activity of 289 ± 9 mU/mg using ethanol and NAD⁺ as substrate and cofactor, respectively. Corresponding experiments on the expression and activity of ADH3 gave 4 mU/mg of specific activity. N. crassa ADH1 preferred primary alcohols containing C3–C8 carbons to secondary alcohols such as 2-propanol and 2-butanol. N. crassa ADH1 possessed 5.3 mU/mg of specific carboxylate ester-forming activity accumulating 0.4 mM of ethyl acetate in 18 h. Substrate specificity of various linear alcohols and aldehydes indicated that short chain-length alcohols and aldehydes were good substrates for carboxylate ester production. N. crassa ADH1 was a primary alcohol dehydrogenase using cofactor NAD⁺ preferably and possessed carboxylate ester-forming activity with short chain alcohols and aldehydes.     

The white-rot fungus Cerrena unicolor strain 137 produces two laccase isoforms with different physico-chemical and catalytic properties

Cerrena unicolor secreted two laccase isoforms with different characteristics during the growth in liquid media. In a synthetic low-nutrient nitrogen glucose medium (Kirk medium), high amounts of laccase (4,000 U l⁻¹) were produced in response to Cu²⁺. Highest laccase levels (19,000 U l⁻¹) were obtained in a complex tomato juice medium. The isoforms (Lacc I, Lacc II) were purified to homogeneity with an overall yield of 22%. Purification involved ultrafiltration and Mono Q separation. Lacc I and II had M _w of 64 and 57 kDa and pI of 3.6 and 3.7, respectively. Both isoforms had an absorption maximum at 608 nm but different pH optima and thermal stability. Optimum pH ranged from 2.5 to 5.5 depending on the substrate. The pH optima of Lacc II were always higher than those of Lacc I. Both laccases were stable at pH 7 and 10 but rapidly lost activity at pH 3. Their temperature optimum was around 60°C, and at 5°C they still reached 30% of the maximum activity. Lacc II was the more thermostable isoform that did not lose any activity during 6 months storage at 4°C. Kinetic constants (K _m, k _cat) were determined for 2,2′-azino-bis(3-ethylthiazoline-6-sulfonate) (ABTS), 2,6-dimethoxyphenol and syringaldazine.     

Partial purification and characterization of the novel halotolerant and alkalophilic laccase produced by a new isolate of Bacillus subtilis LP2

Laccases (benzenediol: oxygen oxidoreductases, [EC1.10.3.2] are mostly known as members of the blue multicopper oxidase family that are used in very different industrial applications: textile, pulp and paper, food, cosmetics industries, bioremediation process, biosensor, biofuel and organic synthesis. Stability against the extreme conditions is an important property and it makes laccase suitable for several industrial processes. Laccase should have salt resistance to be used in textile dye degradation because the textile wastewaters include dyes with high concentrations of salts, especially NaCl. Bacterial laccases are preferable to be used for bioremediation process due to their high stability to extremely salt contaminated and alkalophilic environment. Bacillus subtilis LP2 was identified as a source of alkali-tolerant, salt resistant laccase. Laccase showed activity over a wide pH (4–10) and temperature (30–80?°C) range. Maximum laccase activity was observed as 140.4?U/mg (umol/min*mg) at pH 8 and 50?°C with the substrate guaiacol. Stability of laccase was determined as 60% and 20% after incubation of the enzyme for different time intervals of 20 and 40?min at 50?°C and pH 8. SDS (10?mM) and EDTA (5?mM) decreased laccase activity from 100% to 0% and 56%, respectively. Despite the other inhibitors, NaCI increased the activity of laccase to 167% at 500?mM concentration. Laccase from Bacillus subtilis LP2 barely showed the activity on the substrates vanillin and L-tyrosine. These results clearly show that laccase from Bacillus subtilis LP2 has high potential to be used for several applications in textile industry.     

Purification and characterization of a thermostable laccase with unique oxidative characteristics from <Emphasis Type="Italic">Trametes hirsuta</Emphasis>

A laccase was purified from Trametes hirsuta. This laccase was classified as a “white” or “yellow” laccase. pH 2.4 was optimal for the oxidation of ABTS and pH 2.5 for DMP. DMP oxidation was optimal at 85°C. The half-life of this laccase was 70 min at 75°C, and 5 h at 65°C. Non-phenolic dyes, such as Methyl Red, were oxidized by purified laccase without mediators. The enzyme was not inhibited by Cu²⁺, Mn²⁺, or EDTA. These are atypical laccase characteristics that make it a good candidate for theoretical and applied research.     

Bioprocess exploration for thermostable α-amylase production of a deep-sea thermophile Geobacillus sp. in high-temperature bioreactor

Geobacillus sp. 4j, a deep-sea high-salt thermophile, was found to produce thermostable α-amylase. In this work, culture medium and conditions were first optimized to enhance the production of thermostable α-amylase by statistical methodologies. The resulting extracellular production was increased by five times and reached 6.40?U/ml. Then, a high-temperature batch culture of the thermophile in a 15?l in-house-designed bioreactor was studied. The results showed that a relatively high dissolved oxygen (600?rpm and 15?l/min) and culture temperature of 60°C facilitated both cell growth and α-amylase production. Thus, an efficient fermentation process was established with initial medium of pH 6.0, culture temperature of 60°C, and dissolved oxygen above 20%. It gave an α-amylase production of 79?U/ml and productivity of 19804?U/l·hr, which were 10.8 and 208 times higher than those in shake flask, respectively. This work is useful for deep-sea high-salt thermophile culture, where efforts are lacking presently.     

Laccase isoforms with unusual properties from the basidiomycete Steccherinum ochraceum strain 1833

Aims: To isolate and characterize the laccase isoforms from S. ochraceum 1833 – a new active producer of high extracellular laccase activity. Methods and Results: Three laccase isoforms (laccases I, II and III) with 57·5, 59·5 and 63 kDa molecular masses respectively were purified from S. ochraceum 1833 and in contrast to the known laccases had strongly pronounced absorption at 611 nm with molar extinction coefficients ranging from 7170 to 7830 mol^?1 l cm^?1. All isoforms showed maximal activity with ABTS at low pH (≤2) and temperatures in the range 70–80°C, were stable for long time of incubation at high temperature (60–80°C) and at pH values ranging from 2 to 6. Laccase II showed a higher activity and wider substrate specificity. N‐terminal amino acid sequence analysis of the purified laccase II (VQIGPVTDLH) showed 80% identity with the N‐terminal amino acid sequence of laccase from Lentinula edodes [Appl Microbiol Biotechnol 60 (2002) 327]. Conclusions: Elevated temperature optima, high thermo‐ and pH‐stabilities, the broad substrate specificity of the isoforms make the laccases from S. ochraceum 1833 a suitable model for biotechnological processes proceeding at high temperatures. Significance and Impact of the Study: For the first time, new basidiomycete strain S. ochraceum was reported as a producer of novel thermostable, pH stable, acidophilic laccases with unusual spectral properties.     

Purification of recombinant laccase from Trametes versicolor in Pichia methanolica and its use for the decolorization of anthraquinone dye

A recombinant laccase from Trametes versicolor in Pichia methanolica was produced constitutively in a defined medium. The recombinant laccase was purified using ultrafiltration, anion-exchange chromatography, and gel filtration. The molecular weight of the purified laccase was estimated as 64 kDa by SDS-PAGE. The purified recombinant laccase decolorized more than 90% of Remazol Brilliant Blue R (RBBR) initially at 80 mg l⁻¹ after 16 h at 45°C and pH 5 when 25 U laccase ml⁻¹ was used. The purified recombinant laccase could efficiently decolorize RBBR without additional redox mediators.     

Effect of Nutritional Parameters on Laccase Production by the Culinary and Medicinal Mushroom, <Emphasis Type="Italic">Grifola frondosa</Emphasis>

Extracellular laccase in cultures of Grifola frondosa grown in liquid culture on a defined medium was first detectable in the early/middle stages of primary growth, and enzyme activity continued to increase even after fungal biomass production had peaked. Laccase production was significantly increased by supplementing cultures with 100–500 μM Cu over the basal level (1.6 μM Cu) and peak levels observed at 300 μM Cu were 7-fold higher than in unsupplemented controls. Decreased laccase activity similar to levels detected in unsupplemented controls, as well as an adverse effect on fungal growth, occurred with further supplementation up to and including 0.9 mM Cu, but higher enzyme titres (2- to 16-fold compared with controls) were induced in cultures supplemented with 1–2 mM Cu²⁺. SDS-PAGE combined with activity staining revealed the presence of a single protein band (M _r 70 kDa) exhibiting laccase activity in control culture fluids, whereas an additional distinct laccase protein band (M _r 45 kDa) was observed in cultures supplemented with 1–2 mM Cu. Increased levels of extracellular laccase activity, and both laccase isozymes, were also detected in cultures of G. frondosa supplemented with ferulic, vanillic, veratric and 4-hydroxybenzoic acids, and 4-hydroxybenzaldehyde. Using 2,2′-azino-bis(ethylbenzothiazoline-6-sulfonate) (ABTS) as substrate, the optimal temperature and pH values for laccase activity were 65°C and pH 2.2, respectively, and the enzyme was relatively heat stable. In solid-state cultures of G. frondosa grown under conditions adopted for industrial-scale mushroom production, extracellular laccase levels increased during the substrate colonization phase, peaked when the substrate was fully colonized, and then decreased sharply during fruit body development.     

Production,purification and characterization of a thermostable laccase from a tropical white-rot fungus

A thermostable laccase was isolated from a tropical white-rot fungus Polyporus sp. which produced as high as 69,738 units of laccase l⁻¹ in an optimized medium containing 20 g of malt extract l⁻¹, 2 g of yeast extract l⁻¹, 1.5 mM CuSO₄. The laccase was purified to electrophoretic purity with a final purification of 44.70-fold and a recovery yield of 21.04%. The purified laccase was shown to be a monomeric enzyme with a molecular mass of 60 kDa. The optimum temperature and pH value of the laccase were 75°C and pH 4.0, respectively, for 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS). The Michaelis–Menten constant (K _m ) of the laccase was 18 μM for ABTS substrate. The laccase was stable at pH values between 5.5 and 7.5. About 80% of the initial enzyme activity was retained after incubation of the laccase at 70°C for 2 h, indicating that the laccase was intrinsically highly thermostable and with valuable potential applications. The laccase activity was promoted by 4.0 mM of Mg²⁺, Mn²⁺, Zn²⁺ and Ca²⁺, while inhibited by 4.0 mM of Co²⁺, Al³⁺, Cu²⁺, and Fe²⁺, showing different profiles of metal ion effects.     

Optimization, production, and partial characterization of an alkalophilic amylase produced by sponge associated marine bacterium Halobacterium salinarum MMD047

An endosymbiont Halobacterium salinarum MMD047, which could produce high yields of amylase, was isolated from marine sponge Fasciospongia cavernosa, collected from the peninsular coast of India. Maximum production of enzyme was obtained in minimal medium supplemented with 1% sucrose. The enzyme was found to be produced constitutively even in the absence of starch. The optimum temperature and pH for the enzyme production was 40°C and 8.0, respectively. The enzyme exhibited maximum activity in pH range of 6∼10 with an optimum pH of 9.0. The enzyme was stable at 40°C and the enzyme activity decreased dramatically above 50°C. Based on the present findings, the enzyme was characterized as relatively heat sensitive and alkalophilic amylase which can be developed for extensive industrial applications.     

Production of a novel laccase from Paraphoma Sp

By using a laccase-secretion indicator for screening laccase-producing microorganisms, a novel laccase-producing strain was isolated and identified as Paraphoma sp. strain GZS18, it produced increased laccase and mycelia at 34?°C. Further investigations showed that the production of laccase by Paraphoma sp. GZS18 was greatly enhanced by less toxic inducers copper sulphate and methyl orange. Copper sulphate and methyl orange were added into the cultivation medium at 12 and 60?h, respectively, and the maximum laccase production was obtained. Through Plackett–Burman design and response surface methodology, we obtained the optimum production conditions as follows: methyl orange, 39.90?μM; addition time of copper sulphate, 11.95?h; addition time of methyl orange, 51.40?h. Under the above conditions, the experimental value of laccase production was 12,250.76?U/L. The extracellular laccase from Paraphoma sp. GZS18 was purified to homogeneity, which showed a molecular mass of 75?kDa. N-terminal amino acid sequences was AX^aVSVASREMT.     

Effect of nutritional parameters on laccase production by the culinary and medicinal mushroom, Grifola frondosa

Summary Extracellular laccase in cultures of Grifola frondosa grown in liquid culture on a defined medium was first detectable in the early/middle stages of primary growth, and enzyme activity continued to increase even after fungal biomass production had peaked. Laccase production was significantly increased by supplementing cultures with 100–500 (M Cu over the basal level (1.6 mM Cu) and peak levels observed at 300 mM Cu were ∼ ∼7-fold higher than in unsupplemented controls. Decreased laccase activity similar to levels detected in unsupplemented controls, as well as an adverse effect on fungal growth, occurred with further supplementation up to and including 0.9 mM Cu, but higher enzyme titres (2- to 16-fold compared with controls) were induced in cultures supplemented with 1–2 mM Cu²⁺. SDS-PAGE combined with activity staining revealed the presence of a single protein band (M _r ∼ ∼70 kDa) exhibiting laccase activity in control culture fluids, whereas an additional distinct second laccase protein band (M _r␣∼ ∼45 kDa) was observed in cultures supplemented with 1–2 mM Cu. Increased levels of extracellular laccase activity, and both laccase isozymes, were also detected in cultures of G. frondosa supplemented with ferulic, vanillic, veratric and 4-hydroxybenzoic acids, and 4-hydroxybenzaldehyde. The optimal temperature and pH values for laccase activity were 65 °C and pH 2.2 (using 2,2′-azinobis(3-ethylbenzthiazoline-6-sulfonate) {ABTS} as substrate), respectively, and the enzyme was relatively heat stable. In solid-state cultures of G. frondosa grown under conditions adopted for industrial-scale mushroom production, extracellular laccase levels increased during the substrate colonization phase, peaked when the substrate was fully colonized, and then decreased sharply during fruit body development.     

Effect of soya lecithin on the enzymatic system of the white-rot fungi Anthracophyllum discolor

The present work optimized the initial pH of the medium and the incubation temperature for ligninolytic enzymes produced by the white-rot fungus Anthracophyllum discolor. Additionally, the effect of soya lecithin on mycelial growth and the production of ligninolytic enzymes in static batch cultures were evaluated. The critical micelle concentration of soya lecithin was also studied by conductivity. The effects of the initial pH (3, 4, and 5) and incubation temperature (20, 25, and 30°C) on different enzymatic activities revealed that the optimum conditions to maximize ligninolytic activity were 26°C and pH 5.5 for laccase and manganese peroxidase (MnP) and 30°C and pH 5.5 for manganese-independent peroxidase (MiP). Under these culture conditions, the maximum enzyme production was 10.16, 484.46, and 112.50 U L⁻¹ for laccase, MnP, and manganese-independent peroxidase MiP, respectively. During the study of the effect of soya lecithin on A. discolor, we found that the increase in soya lecithin concentration from 0 to 10 g L⁻¹ caused an increase in mycelial growth. On the other hand, in the presence of soya lecithin, A. discolor produced mainly MnP, which reached a maximum concentration of 30.64 ± 4.61 U L⁻¹ after 25 days of incubation with 1 g L⁻¹ of the surfactant. The other enzymes were produced but to a lesser extent. The enzymatic activity of A. discolor was decreased when Tween 80 was used as a surfactant. The critical micelle concentration of soya lecithin calculated in our study was 0.61 g L⁻¹.     

Production, partial characterization and mass spectrometric studies of the extracellular laccase activity from Fusarium proliferatum

Benzyl alcohol and starch-free commercial wheat bran were effective inducers of the laccase activity in cultures of Fusarium proliferatum (MUCL 31970). Initial pH value in the cultures was also an overriding factor for increasing its production. By gel permeation high-performance liquid chromatography, the enzyme eluted as an apparently homogeneous peak with a molecular mass of 54 kDa, but by isoelectrofocusing, two proteins with pI values of 5.17 and 5.07 were revealed. Two different phenoloxidase activities were also detected after nondenaturing polyacrylamide gel electrophoresis. By matrix-assisted laser desorption/ionization–time of flight–mass spectrometry (MALDI-TOF-MS), both proteins showed unique fingerprints, so they were classifiable as isozymes, and were named laccase 1 (Lac1, pI 5.17) and laccase 2 (Lac2, pI 5.07). No clear matches were found when compared with other proteins. The tandem mass spectrometry of some peptides from both isozymes reanalyzed by nanoelectron ionization–ion trap–mass spectrometry (nESI-IT-MS) confirmed their unique character. The following interesting properties, particularly its stability at alkaline pH, make this laccase a promising industrial enzyme for biotechnological applications: maximum activity at 60°C, thermal stability for 2 h at 40°C, optimum pH 3.5 (km=62 μM) measured on 2,2′-azino-bis(3-ethylbenz-thiazoline-6-sulfonate), and pH stability 4–8 (75% stability at pH levels 2.2 and 9) for 2 h at 25°C.     

Production of a fibrinolytic enzyme by thermophilic Streptomyces species

A strong fibrin-specific fibrinolytic enzyme was purified from the cell-free spent culture broth of a thermophilic organism, Streptomyces megasporus SD5. The strain could produce 150 mg crude protein per litre of spent broth, with a specific activity of 80 IU (Plough units) per milligram, within 18 h of incubation at 55 °C in glucose yeast/extract/peptone (GYP) medium, pH 8.0. For production of the enzyme, the strain could utilize different carbon and nitrogen sources with a C:N ratio of ∼ 1:2. The enzyme was stable at a broad range of pH ranging from 5 to 9, and highly thermostable with 50% activity after storage at 60 °C for 6 months. The enzyme belonged to the serine endopeptidase group. In vitro clot lysis revealed that the enzyme was active at 37 °C. This revised version was published online in July 2006 with corrections to the Cover Date.     

Characterization of a thermostable and solvent-tolerant laccase produced by Streptomyces sp. LAO

Objectives

Decaying wood samples were collected, and actinomycetes were isolated and screened for laccase production. The identity of the efficient laccase-producing isolate was confirmed by using a molecular approach. Fermentation conditions for laccase production were optimized, and laccase biochemical properties were studied.

Results

Based on the 16S rRNA gene sequencing and phylogenetic analysis, the isolate coded as HWP₃ was identified as Streptomyces sp. LAO. The time-course study showed that the isolate optimally produced laccase at 84 h with 40.58?±?2.35 U/mL activity. The optimized physicochemical conditions consisted of pH 5.0, ferulic acid (0.04%; v/v), pine back (0.2 g/L), urea (1.0 g/L), and lactose (1 g/L). Streptomyces sp. LAO laccase was optimally active at pH and temperature of 8.0 and 90 °C, respectively, with remarkable pH and thermal stability. Furthermore, the enzyme had a sufficient tolerance for organic solvents after 16 h of preincubation, with laccase activity?>?70%. Additionally, the laccase maintained considerable residual activity after pretreatment with 100 mM of chemical agents, including sodium dodecyl sulphate (69.93?±?0.89%), ethylenediaminetetraacetic acid (93.1?±?7.85%), NaN₃ (96.28?±?3.34%) and urea (106.03?±?10.72%).

Conclusion

The laccase's pH and thermal stability; and robust catalytic efficiency in the presence of organic solvents suggest its industrial and biotechnological application potentials for the sustainable development of green chemistry.

     

Efficient production of laccases by Trametes sp. AH28-2 in cocultivation with a Trichoderma strain

A biocontrol fungus isolated from rotting wood was identified as a Trichoderma strain (named as Trichoderma sp. ZH1) by internal transcribed spacer (ITS) sequences of rRNA genes. The laccase yield of Trametes sp. AH28-2 in cocultivation with Trichoderma sp. ZH1 reached 6,210 U l⁻¹, approximately identical to those induced by toxic aromatic inducers. Cocultures maintained 60–70 % of their highest laccase activity obtained at 5 days after inoculation of the biocontrol fungus, at least for 20 days. Furthermore, a novel laccase isozyme (LacC) was obtained through the fungal interactions. The molecular weight of LacC is about 64 kDa, and its isoelectric point is 6.6. The temperature and pH optimum for LacC to oxidize guaiacol are 55 °C and 5.0, respectively. LacC is stable both at 60 °C and pH 4.0–8.0. Furthermore, the K _m values of LacC for various substrates were also determined. Our work demonstrates a safe strategy for the production of industrial laccases, instead of the traditional method of chemical induction.     

Production of Cellobionate from Cellulose Using an Engineered Neurospora crassa Strain with Laccase and Redox Mediator Addition

We report a novel production process for cellobionic acid from cellulose using an engineered fungal strain with the exogenous addition of laccase and a redox mediator. A previously engineered strain of Neurospora crassa (F5∆ace-1∆cre-1∆ndvB) was shown to produce cellobionate directly from cellulose without the addition of exogenous cellulases. Specifically, N. crassa produces cellulases, which hydrolyze cellulose to cellobiose, and cellobiose dehydrogenase (CDH), which oxidizes cellobiose to cellobionate. However, the conversion of cellobiose to cellobionate is limited by the slow re-oxidation of CDH by molecular oxygen. By adding low concentrations of laccase and a redox mediator to the fermentation, CDH can be efficiently oxidized by the redox mediator, with in-situ re-oxidation of the redox mediator by laccase. The conversion of cellulose to cellobionate was optimized by evaluating pH, buffer, and laccase and redox mediator addition time on the yield of cellobionate. Mass and material balances were performed, and the use of the native N. crassa laccase in such a conversion system was evaluated against the exogenous Pleurotus ostreatus laccase. This paper describes a working concept of cellobionate production from cellulose using the CDH-ATBS-laccase system in a fermentation system.