Characterizing the interaction among bullet, body armor, and human and surrogate targets

This study used a combined experimental and modeling approach to characterize and quantify the interaction among bullet, body armor, and human surrogate targets during the 10-1000 μs range that is crucial to evaluating the protective effectiveness of body armor against blunt injuries. Ballistic tests incorporating high-speed flash X-ray measurements were performed to acquire the deformations of bullets and body armor samples placed against ballistic clay and gelatin targets with images taken between 10 μs and 1 ms of the initial impact. Finite element models (FEMs) of bullet, armor, and gelatin and clay targets were developed with material parameters selected to best fit model calculations to the test measurements. FEMs of bullet and armor interactions were then assembled with a FEM of a human torso and FEMs of clay and gelatin blocks in the shape of a human torso to examine the effects of target material and geometry on the interaction. Test and simulation results revealed three distinct loading phases during the interaction. In the first phase, the bullet was significantly slowed in about 60 μs as it transferred a major portion of its energy into the body armor. In the second phase, fibers inside the armor were pulled toward the point of impact and kept on absorbing energy until about 100 μs after the initial impact when energy absorption reached its peak. In the third phase, the deformation on the armor's back face continued to grow and energies inside both armor and targets redistributed through wave propagation. The results indicated that armor deformation and energy absorption in the second and third phases were significantly affected by the material properties (density and stiffness) and geometrical characteristics (curvature and gap at the armor-target interface) of the targets. Valid surrogate targets for testing the ballistic resistance of the armor need to account for these factors and produce the same armor deformation and energy absorption as on a human torso until at least about 100 μs (maximum armor energy absorption) or more preferably 300 μs (maximum armor deformation).     

Blast shock wave mitigation using the hydraulic energy redirection and release technology

A hydraulic energy redirection and release technology has been developed for mitigating the effects of blast shock waves on protected objects. The technology employs a liquid-filled plastic tubing as a blast overpressure transformer to transfer kinetic energy of blast shock waves into hydraulic energy in the plastic tubings. The hydraulic energy is redirected through the plastic tubings to the openings at the lower ends, and then is quickly released with the liquid flowing out through the openings. The samples of the specifically designed body armor in which the liquid-filled plastic tubings were installed vertically as the outer layer of the body armor were tested. The blast test results demonstrated that blast overpressure behind the body armor samples was remarkably reduced by 97% in 0.2 msec after the liquid flowed out of its appropriate volume through the openings. The results also suggested that a volumetric liquid surge might be created when kinetic energy of blast shock wave was transferred into hydraulic energy to cause a rapid physical movement or displacement of the liquid. The volumetric liquid surge has a strong destructive power, and can cause a noncontact, remote injury in humans (such as blast-induced traumatic brain injury and post-traumatic stress disorder) if it is created in cardiovascular system. The hydraulic energy redirection and release technology can successfully mitigate blast shock waves from the outer surface of the body armor. It should be further explored as an innovative approach to effectively protect against blast threats to civilian and military personnel.     

Assessment of haemodynamic changes and acid-base equilibrium during hypovolaemia and after infusion of plasma substitutes in dogs

The following haemodynamic values were determined in anaesthetized mongrel dogs: heart rate, systolic blood pressure in the ascending aorta, left ventricular pressure at the peak dp/dt, left ventricular end-diastolic pressure, time interval from Q in ECG to the onset of the systolic wave of dp/dt, time interval from Q in ECG to peak dp/dt, maximum rate of left ventricular pressure rise, femoral arterial flow, and certain indices of left ventricular contractility. It was concluded from the results of these experiments that infusion of a modified gelatin solution Fluigel prevented haemodynamic and metabolic changes produced by experimental hypovolaemia more effectively than infusion of Plasmagel.     

Resolving the time lag between pressure and flow for the determination of local wave speed in elastic tubes and arteries

It is well established that wave speed can be determined using the initial linear part of the pressure–velocity loop (PU-loop). However, the frequency response of most flow measuring devices is usually slower than that of solid-state pressure transducers; making flow waveforms lagging in time behind pressure waveforms. If this lag, which is traditionally determined by eye, is not corrected prior to the analysis, the PU-loop method may provide inaccurate wave speeds. The main aim of this work is therefore to introduce an objective technique to establish the value of this lag.The new technique relies on the linearity between pressure and velocity in the absence of reflections, and determines the highest correlation factor between pressure and velocity in the range of minimum pressure to maximum velocity. We shifted the flow waveform backwards in time steps equal to the sampling interval, and the time shift associated with the highest correlation indicates the correct time lag of the flow waveform. We first tested the new technique in vitro using a uniform latex tube and compared the results to those established using the traditional by eye method, whilst varying the filter setting of the flowmeter. Then we applied the new technique to pressure and flow measured in the ascending aorta of anaesthetised open-chested dogs.We found the time lag between pressure and velocity calculated by the new technique in good agreement with that determined by eye in vitro and that increasing the filtering power generated greater delay between the measured pressure and flow. The results obtained in vivo using the new technique were also in good agreement with those determined by eye. We therefore conclude that the new technique provides a convenient and objective way of correcting the lag and can reliably align pressure and flow.     

A high-frequency lung injury mechanism in blunt thoracic impact

When a mechanical load is applied very rapidly to the thoracic wall, part of the internal damage is suspected to be due to a "high-frequency" injury mechanism, that is, a phenomenon in which waves are involved. This paper addresses a specific high-frequency mechanism for lung injury in which a stress wave is generated through rapid acceleration of the body wall. Displacement-related injuries, which are rather "low-frequency" phenomena, are not considered. The present work was done in the context of assessing behind armor blunt trauma (injury to thoracic organs occurring when a bullet is stopped by a body armor) through mathematical modeling. One aspect of the thorax response to high-speed blunt impact and an associated injury mechanism are investigated based on an idealized model of thorax and a set of computations presented in previous papers. The injury mechanism considered elucidates a possible mathematical relationship between the acceleration at the surface of the thoracic wall and the occurrence of lung injury.     

Anharmonic analysis of arterial blood pressure and flow pulses

Fourier analysis is usually employed for the computation of blood flow in arteries. Although the orthogonality of Fourier eigenfunctions guarantees the accurate mathematical modeling of the blood pressure and flow waveforms, the physics behind this objective function is frequently missing. We propose a new method to account for the blood pressure and flow, single-cycle (systole-diastole) waveforms. It is based on the one dimensional hydrodynamic mass and momentum conservation equations for viscous flow. The similarity of the linear problem, under discussion, with related transmission line theory in electromagnetic wave propagation, permits expansion in anharmonic, non-separable eigenfunctions. In some cases one term in the expansion is adequate to fit the main peak of the observed waveforms. Analytical formulas are derived for the dependence of the pressure and flow main peaks on whole blood viscosity and distance from the heart, which interpret observations related to hypertension.     

Negative-polarity fast ionization wave in molecular gases: Electric field, electron density, and energy branching

The charge density per unit length, the longitudinal component of the electric field, and the electron density behind the front of a fast ionization wave initiated by a nanosecond negative voltage pulse in air, N₂, and H₂ in the 1-to 24-torr pressure range are reconstructed from the experimental data. It is shown that the electron density behind the wave front depends weakly on the sort of gas used and, at relatively high pressures (8–24 torr), is (2–3)×10¹² cm^?3. The energy deposited in the internal degrees of freedom is analyzed. It is shown that, for all gases used, most of the deposited energy (40–60%) is spent on the excitation of the electron degrees of freedom. The fraction of the energy deposited in the high-energy degrees of freedom (ionization and dissociation) monotonically decreases with increasing the pressure, whereas the fraction of the energy spent on the excitation of the low-energy degrees of freedom (rotational and vibrational) monotonically increases.     

The effect of the manipulation of follicle-stimulating hormone (FSH)-peak characteristics on follicular wave dynamics in sheep: does an ovarian-independent endogenous rhythm in FSH secretion exist?

We designed three experiments to investigate the relationship between FSH peaks and ovarian follicular waves and to examine whether an endogenous rhythm of FSH peaks exists in sheep. In experiment 1, anestrous ewes were treated with ovine FSH (oFSH) or vehicle (6 ewes per group) at the expected time of an endogenous FSH peak, to double the FSH-peak amplitude in treated ewes. In experiment 2, anestrous ewes were treated with either oFSH or vehicle (6 ewes per group) at the expected time of two consecutive interpeak nadirs, such that the treated ewes had 5 FSH peaks in the time frame of 3 FSH peaks in control ewes. In experiment 3, to measure FSH concentrations, daily blood samples were collected from 5 cyclic ewes for a control period during the estrous cycle and then for three 17-day periods after ovariectomy. Daily blood samples were collected from another group of 8 ovariectomized ewes that were treated with estradiol-releasing implants and intravaginal progestogen sponges. Doubling the FSH-peak amplitude did not alter the characteristics of the following follicular wave. Increasing the frequency of FSH peaks stimulated the emergence of additional follicular waves, but did not alter the rhythmic occurrence of FSH peaks and follicular wave emergence. Endogenous follicular waves in oFSH-treated ewes emerged and grew in the presence of the growing largest follicle of the induced follicular waves. Finally, based on the observation of serum FSH concentrations in ovariectomized ewes, it appears that there exists an endogenous rhythm for peaks in daily serum FSH concentrations, which is, at least in part, independent of regulation by ovarian follicular growth patterns.     

Characteristics and Gel Properties of Gelatin from Skin of Asian Bullfrog (<Emphasis Type="Italic">Rana tigerina</Emphasis>)

Characteristics and gel properties of gelatin from frog skin as influenced by extraction temperatures (45–75 °C) were investigated. Yield of gelatin increased as the extraction temperature increased (P < 0.05). All gelatins contained α- and β-chains as the predominant components and showed a high imino acid content (215 residues/1000 residues). Fourier transform infrared (FTIR) spectra indicated that all gelatin samples had major peaks in amide regions. Gelatin extracted at 55 °C exhibited the highest gel strength (P < 0.05), which was similar to that of commercial bovine gelatin (P > 0.05). Gelling and melting temperatures of frog skin gelatin were 23.47–24.87 and 33.22–34.66 °C, respectively. Gels became more yellowish with increasing extraction temperatures (P < 0.05). All gelatin gels were sponge or coral-like in structure but varied in patterns as visualized by scanning electron microscopy (SEM). Gelatin from frog skin could be used as a replacement for land animal counterpart.     

Synthesis of Injectable Shear‐Thinning Biomaterials of Various Compositions of Gelatin and Synthetic Silicate Nanoplatelet

Injectable shear‐thinning biomaterials (iSTBs) have great potential for in situ tissue regeneration through minimally invasive therapeutics. Previously, an iSTB was developed by combining gelatin with synthetic silicate nanoplatelets (SNPs) for potential application to hemostasis and endovascular embolization. Hence, iSTBs are synthesized by varying compositions of gelatin and SNPs to navigate their material, mechanical, rheological, and bioactive properties. All compositions (each component percentage; 1.5–4.5%/total solid ranges; 3–9%) tested are injectable through both 5 Fr general catheter and 2.4 Fr microcatheter by manual pressure. In the results, an increase in gelatin contents causes decrease in swellability, increase in freeze‐dried hydrogel scaffold porosity, increase in degradability and injection force during iSTB fabrication. Meanwhile, the amount of SNPs in composite hydrogels is mainly required to decrease degradability and increase shear thinning properties of iSTB. Finally, in vitro and in vivo biocompatibility tests show that the 1.5–4.5% range gelatin–SNP iSTBs are not toxic to the cells and animals. All results demonstrate that the iSTB can be modulated with specific properties for unmet clinical needs. Understanding of mechanical and biological consequences of the changing gelatin–SNP ratios through this study will shed light on the biomedical applications of iSTB on specific diseases.     

THE SWELLING PRESSURE OF GELATIN AND THE MECHANISM OF SWELLING IN WATER AND NEUTRAL SALT SOLUTIONS

1. A method is described for measuring the swelling pressure of solid gelatin. 2. It was found that this pressure increases rapidly between 15° and 37°C., and that the percentage change is nearly independent of the concentration of gelatin. 3. It is suggested that this pressure is due to the osmotic pressure of a soluble constituent of the gelatin held in the network of insoluble fibers, and that gelatin probably consists of a mixture of at least two substances or groups of substances, one of which is soluble in cold water, does not form a gel, and has a low viscosity and a high osmotic pressure. The second is insoluble in cold water, forms a gel in very low concentration, and swells much less than ordinary gelatin. 4. Two fractions, having approximately the above properties, were isolated from gelatin by alcohol precipitation at different temperatures. 5. Increasing the temperature and adding neutral salts greatly increase the pressure of the insoluble fraction and have little effect on that of the soluble fraction. 6. Adding increasing amounts of the soluble fraction to the insoluble one results in greater and greater swelling. 7. These results are considered as evidence for the idea that the swelling of gelatin in water or salt solutions is an osmotic phenomenon, and that gelatin consists of a network of an insoluble substance enclosing a solution of a soluble constituent.     

Wave dissipation in flexible tubes in the time domain: in vitro model of arterial waves

Earlier work of wave dissipation in flexible tubes and arteries has been carried out predominantly in the frequency domain and most of the studies used the measured pressure waveform for presenting the results. In this work we investigate the pattern of wave dissipation in the time domain using the separated forward and backward travelling waves in flexible tubes. We tested four sizes of latex tubes of 2m in length each, where a single semi-sinusoidal in shape, pressure wave, was produced at the inlet of each tube. Simultaneous measurements of pressure and flow waveforms were recorded every 5cm along the tubes and wave speed was determined using the pressure-velocity loop method (PU-loop). The measured data and wave speed were used to separate the pressure waveform and wave intensity, into their forward and backward directions, using wave intensity analysis (WIA). Also, the energy carried by the wave was calculated by integrating the relevant area under the wave intensity curve. The peak of the measured pressure waveform increased downstream, however, the peak of the separated forward pressure waveform decreased exponentially along the tube. Wave intensity and energy also dissipated exponentially along the travelling distance. The peaks of the separated pressure and wave intensity decreased in the forward in a similar exponential way to that in the backward direction in all four tube sizes. Also, the smaller the size of the tube the greater wave dissipation it caused. We conclude that wave separation is useful in studying wave dissipation in elastic tubes, and WIA provides a convenient method for determining the dissipation of the energy carried by the wave along the travelled distance. The separated pressure waveform, wave intensity and wave energy dissipate exponentially with the travelling distance, and wave dissipation varies conversely with the diameter of elastic tubes.     

Remodeling of Aorta Extracellular Matrix as a Result of Transient High Oxygen Exposure in Newborn Rats: Implication for Arterial Rigidity and Hypertension Risk

Neonatal high-oxygen exposure leads to elevated blood pressure, microvascular rarefaction, vascular dysfunction and arterial (aorta) rigidity in adult rats. Whether structural changes are present in the matrix of aorta wall is unknown. Considering that elastin synthesis peaks in late fetal life in humans, and early postnatal life in rodents, we postulated that transient neonatal high-oxygen exposure can trigger premature vascular remodelling. Sprague Dawley rat pups were exposed from days 3 to 10 after birth to 80% oxygen (vs. room air control) and were studied at 4 weeks. Blood pressure and vasomotor response of the aorta to angiotensin II and to the acetylcholine analogue carbachol were not different between groups. Vascular superoxide anion production was similar between groups. There was no difference between groups in aortic cross sectional area, smooth muscle cell number or media/lumen ratio. In oxygen-exposed rats, aorta elastin/collagen content ratio was significantly decreased, the expression of elastinolytic cathepsin S was increased whereas collagenolytic cathepsin K was decreased. By immunofluorescence we observed an increase in MMP-2 and TIMP-1 staining in aortas of oxygen-exposed rats whereas TIMP-2 staining was reduced, indicating a shift in the balance towards degradation of the extra-cellular matrix and increased deposition of collagen. There was no significant difference in MMP-2 activity between groups as determined by gelatin zymography. Overall, these findings indicate that transient neonatal high oxygen exposure leads to vascular wall alterations (decreased elastin/collagen ratio and a shift in the balance towards increased deposition of collagen) which are associated with increased rigidity. Importantly, these changes are present prior to the elevation of blood pressure and vascular dysfunction in this model, and may therefore be contributory.     

Hybrid chitosan–ß‐glycerol phosphate–gelatin nano‐/micro fibrous scaffolds with suitable mechanical and biological properties for tissue engineering

Scaffold‐based tissue engineering is considered as a promising approach in the regenerative medicine. Graft instability of collagen, by causing poor mechanical properties and rapid degradation, and their hard handling remains major challenges to be addressed. In this research, a composite structured nano‐/microfibrous scaffold, made from a mixture of chitosan–ß‐glycerol phosphate–gelatin (chitosan–GP–gelatin) using a standard electrospinning set‐up was developed. Gelatin–acid acetic and chitosan ß‐glycerol phosphate–HCL solutions were prepared at ratios of 30/70, 50/50, 70/30 (w/w) and their mechanical and biological properties were engineered. Furthermore, the pore structure of the fabricated nanofibrous scaffolds was investigated and predicted using a theoretical model. Higher gelatin concentrations in the polymer blend resulted in significant increase in mean pore size and its distribution. Interaction between the scaffold and the contained cells was also monitored and compared in the test and control groups. Scaffolds with higher chitosan concentrations showed higher rate of cell attachment with better proliferation property, compared with gelatin‐only scaffolds. The fabricated scaffolds, unlike many other natural polymers, also exhibit non‐toxic and biodegradable properties in the grafted tissues. In conclusion, the data clearly showed that the fabricated biomaterial is a biologically compatible scaffold with potential to serve as a proper platform for retaining the cultured cells for further application in cell‐based tissue engineering, especially in wound healing practices. These results suggested the potential of using mesoporous composite chitosan–GP–gelatin fibrous scaffolds for engineering three‐dimensional tissues with different inherent cell characteristics. © 2015 Wiley Periodicals, Inc. Biopolymers 105: 163–175, 2016.     

α-Amylase immobilization on gelatin: Optimization of process variables

α-Amylase was extracted and purified from soybean seeds to apparent homogeneity by affinity precipitation. The homogeneous enzyme preparation was immobilized on gelatin matrix using glutaraldehyde as an organic hardener. Response surface methodology (RSM) and 3-level-3-factor Box–Behnken design was employed to evaluate the effects of immobilization parameters, such as gelatin concentration, glutaraldehyde concentration and hardening time on the activity of immobilized α-amylase. The results showed that 20% gelatin (w/v), 10% glutaraldehyde (v/v) and 1 h hardening time yielded an optimum immobilization of 82.5%.     

The effect of pressure on the glass transition of biopolymer/co-solute. Part I: The example of gelatin

High-solid materials of gelatin in the presence of co-solute were prepared and subjected to a series of hydrostatic pressures up to 700 MPa. Following this, a study was made of the relaxation properties of the mixture around the glass transition region and the melting behaviour of the gelatin network. Structural properties were monitored using differential scanning calorimetry and small-deformation dynamic oscillation on shear. Thermograms were obtained and master curves of viscoelasticity were constructed for each experimental pressure. The dependence of the empirical shift distances obtained from mechanical measurements and supplementing evidence from thermal analysis argue that the application of pressure did not alter the vitrification or melting characteristics of the gelatin/co-solute system within the experimentally accessible pressure range. Unlike the principle of the time–temperature–pressure superposition applicable to synthetic macromolecules, it may not be possible to incorporate a pressure component into the framework of thermorheological simplicity governing the glass transition of the high-sugar gelatin network.     

Dynamics of blood pressure, pulse wave transit time and systolic timei intervals during acute gravity changes induced by parabolic flight

To investigate cardiovascular adaptation to transient microgravity (Microgravity), we measured RR intervals (RRI), arterial blood pressure (BP), pulse wave transit time (PTT) and systolic time intervals (STI) during parabolic flight. Our results demonstrate that during microgram RRI, BP and PTT are subject to a rapid adaptation likely mediated by the baroreflex whereas STI changes with microgravity but does not present further adaptation.     

Studies of the optical properties of laser plasmas produced by irradiating spherical targets

Results are presented from studies of the spectral characteristics of a glowing plasma object that forms behind a shock wave propagating in a background gas at a pressure of 1 Torr after laser irradiation of a spherical organic target in the MKV-4 device (a component of the Iskra-5 facility). The experimental data are compared to the results of calculations.     

Swelling and de-swelling kinetics of gelatin hydrogels in ethanol-water marginal solvent

Controlled osmotic swelling and de-swelling measurements have been performed on gelatin, a polyampholyte, hydrogels suspended in water-ethanol marginal solvent at room temperature (20 degrees C) where the alcohol concentration was changed from 0 to 100% (v/v). The change in gel mass was monitored as function of time until osmotic equilibrium was established with the surrounding solvent. It was observed that osmotic pressure of polymer-solvent mixing, pi(m)相似文献   

Spatial velocity distributions in pulse-wave propagation based on fluid–structure interaction

In this paper, spatial velocity distributions in pulse-wave propagation based on a fluid–structure interaction model are presented. The investigation is performed using the assumption of laminar flow and a linear-elastic wall. The fluid–structure interaction scheme is constructed using the finite element method. The results show that velocity distributions embody an obvious time delay in an elastic tube model. Further, the fully developed flow is delayed and the velocity values are increased in comparison with a rigid tube model. The increase in the wall thickness makes the time delay between the velocity peaks of different sites smaller while the time delay between the velocity minima is unchanged. Similarly, the time delay between the velocity bottoms is more easily found when decreasing the internal radius. The model gives valid results for spatial velocity distributions, which provide important information for wave propagation.