首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.

Introduction

Structural heart interventions are guided by transoesophageal or intracardiac echocardiography (TEE/ICE). MicroTEE, developed for paediatric purposes, is smaller and therefore less invasive and traumatic, avoiding the need for general anaesthesia. We aimed to show feasibility of procedural guidance by comparing image quality of microTEE with standard TEE and ICE during adult transcatheter interventions, and assess the accuracy in obtaining left atrial appendage (LAA) measurements between the microTEE probe and standard TEE.

Methods and results

We prospectively included 49 patients (20 women, 64 ± 18 years). Intraprocedural images were obtained by using the microTEE probe and standard (2D and 3D) TEE (LAA closure, MitraClip implantation) or ICE (interatrial communication closure, transseptal puncture for left atrial ablation). Two echocardiographers independently assessed image quality from 1 (excellent) to 4 (poor) and performed LAA measurements. Use of microTEE was not related to significant discomfort. Image quality obtained with the microTEE probe was lower than with standard TEE (2 [1–2] vs. 1 [1–2]; p = 0.04) and comparable with ICE images (2 [1–2] vs. 2 [1–2], p = 0.13). MicroTEE showed a wider field of view than ICE. LAA measurements on images obtained by microTEE were strongly associated with standard TEE.

Conclusions

MicroTEE seems feasible for guidance during transcatheter heart interventions in adults. MicroTEE imaging offers a wider field of view than ICE, and its accuracy is comparable with TEE. In transcatheter interventions performed under conscious sedation, microTEE might be a viable and advantageous alternative to standard TEE or ICE.
  相似文献   

2.

Background

Cervical cancer is the fifth most common cancer among women, which is the third leading cause of cancer death in women worldwide. Brachytherapy is the most effective treatment for cervical cancer. For brachytherapy, computed tomography (CT) imaging is necessary since it conveys tissue density information which can be used for dose planning. However, the metal artifacts caused by brachytherapy applicators remain a challenge for the automatic processing of image data for image-guided procedures or accurate dose calculations. Therefore, developing an effective metal artifact reduction (MAR) algorithm in cervical CT images is of high demand.

Methods

A novel residual learning method based on convolutional neural network (RL-ARCNN) is proposed to reduce metal artifacts in cervical CT images. For MAR, a dataset is generated by simulating various metal artifacts in the first step, which will be applied to train the CNN. This dataset includes artifact-insert, artifact-free, and artifact-residual images. Numerous image patches are extracted from the dataset for training on deep residual learning artifact reduction based on CNN (RL-ARCNN). Afterwards, the trained model can be used for MAR on cervical CT images.

Results

The proposed method provides a good MAR result with a PSNR of 38.09 on the test set of simulated artifact images. The PSNR of residual learning (38.09) is higher than that of ordinary learning (37.79) which shows that CNN-based residual images achieve favorable artifact reduction. Moreover, for a 512?×?512 image, the average removal artifact time is less than 1 s.

Conclusions

The RL-ARCNN indicates that residual learning of CNN remarkably reduces metal artifacts and improves critical structure visualization and confidence of radiation oncologists in target delineation. Metal artifacts are eliminated efficiently free of sinogram data and complicated post-processing procedure.
  相似文献   

3.

Background

Strain analysis is feasible using three-dimensional (3D) echocardiography. This approach provides various parameters based on speckle tracking analysis from one full-volume image of the left ventricle; however, evidence for its volume independence is still lacking.

Methods

Fifty-eight subjects who were examined by transthoracic echocardiography immediately before and after hemodialysis (HD) were enrolled. Real-time full-volume 3D echocardiographic images were acquired and analyzed using dedicated software. Two-dimensional (2D) longitudinal strain (LS) was also measured for comparison with 3D strain values.

Results

Longitudinal (pre-HD: ?24.57 ± 2.51, post-HD: ?21.42 ± 2.15, P < 0.001); circumferential (pre-HD: ?33.35 ± 3.50, post-HD: ?30.90 ± 3.22, P < 0.001); and radial strain (pre-HD: 46.47 ± 4.27, post-HD: 42.90 ± 3.61, P < 0.001) values were significantly decreased after HD. The values of 3D principal strain (PS), a unique parameter of 3D images, were affected by acute preload changes (pre-HD: ?38.10 ± 3.71, post-HD: ?35.33 ± 3.22, P < 0.001). Twist and torsion values were decreased after HD (pre-HD: 17.69 ± 7.80, post-HD: 13.34 ± 6.92, P < 0.001; and pre-HD: 2.04 ± 0.86, post-HD:1.59 ± 0.80, respectively, P < 0.001). The 2D LS values correlated with the 3D LS and PS values.

Conclusion

Various parameters representing left ventricular mechanics were easily acquired from 3D echocardiographic images; however, like conventional parameters, they were affected by acute preload changes. Therefore, strain values from 3D echocardiography should be interpreted with caution while considering the preload conditions of the patients.
  相似文献   

4.

Objectives

To search for a novel glutamate decarboxylase (GAD) with an optimum pH towards near-neutrality in order to improve production of gamma-aminobutyric acid (GABA) in recombinant hosts.

Results

A novel glutamate decarboxylase, BmGAD, from Bacillus megaterium was overexpressed and purified. BmGAD was approximately 53 kDa by SDS-PAGE analysis. Its optimum activity was at pH 5 and 50 °C. BmGAD had a specific activity of 59 ± 5.2 U mg?1 at pH 6, which is the highest value reported so far. The apparent Km and Vmax values of BmGAD were 8 ± 0.5 mM and 150 ± 4.7 U mg?1, respectively. Through site-directed mutagenesis, two BmGAD mutants (E294R and H467A) showed higher Vmax values than that of wild-type, with the values of 210 ± 6.9 and 180 ± 4.1 U mg?1 at pH 5 and 50 °C, respectively.

Conclusions

The unusual high activity of BmGAD at pH 6 makes it an attractive GABA-producing candidate in industrial application.
  相似文献   

5.

Introduction

Three-dimensional rotational angiography (3DRA) has been used in the guidance of various transcatheter therapies including percutaneous pulmonary valve implantation (PPVI). The most recently available 3D image fusion software (VesselNavigator, Philips) extends this technology to use pre-registered computed tomography or magnetic resonance imaging datasets, promising reductions in contrast and radiation exposure along with shorter procedural times.

Methods

In this retrospective review, patients were assigned to three groups according to the mode of imaging guidance: two-dimensional angiography (2DA), 3DRA and VesselNavigator (VN) assisted valve implantation. Patient characteristics and catheterisation data were reviewed with a focus on contrast and radiation exposure, fluoroscopy, and procedural times.

Results

Between July 2012 and June 2016, 21 patients underwent PPVI: 8 with 2D guidance, 6 patients with 3DRA and most recently 7 patients with VN assistance. Patents in the VN group received significantly less absolute and weight indexed contrast when compared with those with 2DA or 3DRA guided PPVI. Patients in the 2DA group received a significantly higher total dose area product radiation dose and air kerma in comparison with patients with 3DRA and VN guided intervention. Application of VN resulted in the shortest fluoroscopy time, although not statistically significant, and a significantly shorter study time when compared with 2DA.

Conclusions

Utilisation of pre-intervention image manipulation with VesselNavigator for 3D guidance of PPVI results in a reduction in contrast and radiation exposure and study time as compared with traditional 2D guidance, and contrast usage as compared with 3DRA.
  相似文献   

6.
Duloxetine intermediate (S)-(-)-3-N-methylamino-1-(2-thienyl)-1-propanol was synthesized using ACA liquid-core immobilized Saccharomyces cerevisiae CGMCC No. 2230. The optimum culture time for ACA liquid-core immobilized cells was found to be 28 h. The optimum ACA liquid-core capsule formation conditions were found to be 90 % chitosan deacetylation, 30,000–50,000 chitosan molecular weight, 5.0 g/L chitosan, and pH 6.0 citrate buffer solution. The highest activity was found when reduction conditions were pH 6.0, 30 °C and 180 rpm. The ACA-immobilized cells can be reused nine times and only 40 % of the activity is retained after nine cycles. Product inhibition of reduction was observed in batch reduction. Continuous reduction in the membrane reactor was found to remove the product inhibition on reduction and improve production capacity. Conversion reached 100 % and enantiometric excess of (S)-(-)-3-N-methylamino-1-(2-thienyl)-1-propanol exceeded 99.0 % in continuous reduction of 5 g/L 3-N-methylamino-1-(2-thienyl)-1-propanone in the membrane reactor.  相似文献   

7.
Development of new energetic salts is the key factor in replacing low performance compounds in conventional formulations of high explosives as well as propellants. Ten salts based on the nitroformate anion and various nitrogen-rich cations were designed and their geometric optimizations carried out using the density functional method. With reasonable oxygen balance (from ?36 % to 0 %), heats of formation (47–624 kJ mol?1) and high densities (1.81–1.89 g cm?3), the detonation velocity (D) and pressure (P) values of salts were calculated as 8.62–9.36 km s?1 and 33.10–40.01 GPa, respectively. Lastly, the nitroformate salts studied in this work are of prospective interest as high performance explosives.
Graphical Abstract Formation of nitroformate salt from nitroformate anion and a nitrogen-rich cation
  相似文献   

8.

Objective

To investigate the effect of adipose tissue-derived mesenchymal stem cell (ASC) administered either systemically or locally in a murine model of bronchiolitis obliterans.

Results

When compared to controls, systemic treatment with 106 ASCs on D0 and a second dose on D7 significantly prevented tracheal obliteration 28 days after heterotopic tracheal transplantation (median of 94 vs. 16%; P < 0.01). A single dose tended towards less stenosis than controls, but did not reach statistical significance (28 vs. 94%; P = 0.054). On the contrary, repeated local injection was incapable of preventing tracheal obliteration when compared to a single injection or controls (37 vs. 71 vs. 87%). Two intravenous doses also tended to be better than two local injections (16 vs. 37%; P = 0.058), and were better than a single local dose (16 vs. 71%; P < 0.01).

Conclusion

A second dose of ASC, given systemically after 7 days, reduces luminal obliteration in a heterotopic tracheal transplantation model in mice, suggesting that ASC can be used to prevent obliterative bronchiolitis after lung transplantation.
  相似文献   

9.
Performance of 18 DFT functionals (B1B95, B3LYP, B3PW91, B97D, BHandHLYP, BMK, CAM-B3LYP, HSEh1PBE, M06-L, mPW1PW91, O3LYP, OLYP, OPBE, PBE1PBE, tHCTHhyb, TPSSh, wB97xD, VSXC) in combinations with six basis sets (cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, aug-cc-pVTZ, IGLO-II, and IGLO-III) and three methods for calculating magnetic shieldings (GIAO, CSGT, IGAIM) was tested for predicting 1H and 13C chemical shifts for 25 organic compounds, for altogether 86 H and 88 C atoms. Proton shifts varied between 1.03 ppm to 12.00 ppm and carbon shifts between 7.87 ppm to 209.28 ppm. It was found that the best method for calculating 13C shifts is PBE1PBE/aug-cc-pVDZ with CSGT or IGAIM approaches (mae?=?1.66 ppm), for 1H the best results were obtained with HSEh1PBE, mPW1PW91, PBE1PBE, CAM-B3LYP, and B3PW91 functionals with cc-pVTZ basis set and with CSGT or IGAIM approaches (mae?=?0.28 ppm). We found that often larger basis sets do not give better results for chemical shifts. The best basis sets for calculating 1H and 13C chemical shifts were cc-pVTZ and aug-cc-pVDZ, respectively. CSGT and IGAIM NMR approaches can perform really well and are in most cases better than popular GIAO approach.
Graphical Abstract Mean absolute errors for 1H and 13C chemical shifts and computational times of neutral toluene molecule with aug-cc-pVDZ basis set and CSGT approach
  相似文献   

10.
Lakes have an esthetic significance that is particularly important for attracting tourism. In this context, it is often preferable for lakes to have clear water, so many lake managers attempt to achieve clear lake water by various means. However, the lakes of Kashmir Himalaya are undergoing several complex ecological changes due to, for example, increasing tourism, overfishing, and intensive agriculture, which are making these lakes less clear. One such change is the vigorous growth and development of aquatic weeds in the shallow-water areas of Kashmir Himalayan lakes. We thus, investigated the response of Nymphoides peltatum, a rapidly multiplying clonal species, to water depth, in order to determine whether water depth can be used to control the spread of this proliferating macrophyte. Different traits of the given plant species, such as the mean number of ramets, were significantly higher (F = 55.412, p = 0.000) at depth zone D1 (0–100 cm) than at depth zones D2 (101–200 cm) and D3 (201–300 cm). In all of the lakes, mean spacer length—a tool for facilitating plant spread—was observed to be significantly higher (F = 45.890, p = 0.000) at lower water levels (0–100 cm). Also, the reproductive structures (flowers) of N. peltatum showed significant variation with depth (F = 51.909, p = 0.000) and with the lake examined (F = 9.909, p = 0.001). Thus, the results obtained during the present study indicate the importance of water depth in the management of N. peltatum in various Kashmir Himalayan lakes.  相似文献   

11.
Dioscorea alata is a staple food in south-eastern Asia and Africa and also widely consumed in the North-eastern region of India. Its medicinal value is well established, but the immunomodulatory property has never been studied on animal model. Therefore, we have investigated the immunomodulatory activity of D. alata by performing plaque forming cell assay, haemagglutination titer, stimulation of phagocytosis assay, inhibition of lipopolysaccharide (LPS) induced nitric oxide (NO) synthesis, carbon-clearance test, in vitro cell adhesions assay and various cell counts. Effect of D. alata on various organ weight and total serum protein, albumin and globulin levels were also determined. At 100 mg/kg dose the macrophages were highly stimulated (P < 0.001) to proliferate and the plaque forming cell number was also found to be optimum (P < 0.001) at the same dose. Elimination of foreign material from the system was found to be highest at 250 mg/kg dose. Both at 100 and 250 mg/kg doses, the phagocytic activity of the macrophages was increased significantly (P < 0.001). Anti-inflammatory activity of D. alata was proved by the inhibition of LPS induced NO synthesis by macrophages. Therefore, it can be concluded that 70 % hydro-methanolic extract of D. alata has profound immunostimulating potential in the murine model, stimulating both humoral and innate arms of the immune system.  相似文献   

12.
The effects of temperature on larval development and the timing of pupation in the carpenter moth, Cossus insularis (Staudinger) (Lepidoptera: Cossidae) were examined by artificial rearing under different temperatures and the same photoperiod (15L:9D). Although C. insularis pupated and emerged at 20, 25, and 30 °C, the pupation rate was lower at 20 °C than at 25 and 30 °C. These results suggest that the optimum temperature range for preadult development is 25–30 °C. The duration of larval development was about 260 days for the first pupation group at 25 and 30 °C, and at least 600 days at 20 °C. Therefore, the C. insularis generation time was 2 years or more, as the total effective temperature for development from hatching to the pupal stage was unlikely to be reached within 1 year in Tokushima Prefecture. The second group pupated at 25 °C, about 200 days after the first group. This periodicity of pupation was likely due to the free-running period of the circannual rhythm. Furthermore, although only the first group pupated at 30 °C, the peak was almost synchronous with the first group at 25 °C. These results indicate that the timing of the first pupation group in C. insularis is temperature compensated. Therefore we propose that the presence of an endogenous rhythm during the development of C. insularis is evidence for a circannual rhythm related to the timing of pupation.  相似文献   

13.
l-Arabinose isomerase (l-AI) catalyzes the isomerization of l-arabinose to l-ribulose and d-galactose to d-tagatose. Most reported l-AIs exhibit neutral or alkaline optimum pH, which is less beneficial than acidophilic ones in industrial d-tagatose production. Lactobacillus fermentum l-AI (LFAI) is a thermostable enzyme that can achieve a high conversion rate for d-galactose isomerization. However, its biocatalytic activity at acidic conditions can still be further improved. In this study, we report the single- and multiple-site mutagenesis on LFAI targeting three aspartic acid residues (D268, D269, and D299). Some of the lysine mutants, especially D268K/D269K/D299K, exhibited significant optimum pH shifts (from 6.5 to 5.0) and enhancement of pH stability (half-life time increased from 30 to 62 h at pH 6.0), which are more favorable for industrial applications. With the addition of borate, d-galactose was isomerized into d-tagatose by D268K/D269K/D299K at pH 5.0, resulting in a high conversion rate of 62 %. Based on the obtained 3.2-Å crystal structure of LFAI, the three aspartic acid residues were found to be distant from the active site and possibly did not participate in substrate catalysis. However, they were proven to possess similar optimum pH control ability in other l-AI, such as that derived from Escherichia coli. This study sheds light on the essential residues of l-AIs that can be modified for desired optimum pH and better pH stability, which are useful in d-tagatose bioproduction.  相似文献   

14.
Arthrobacter sp. strains D2 and D3 and Labrys sp. strain D1 capable of degrading 20 mM monochloroacetic acid (MCA) were isolated from soil contaminated with herbicides and pesticides. All three isolates were able to grow on MCA as the sole source of carbon and energy with concomitant chloride ion release in the growth medium (19 mM). Strains D2 and D3 (cells doubling time 7 ± 0.3 h) grew four times faster than D1 (26 ± 0.1 h). Strain D2 was then further investigated and could also grow in 10 mM of monobromoacetic acid (MBA), 2,2-dichloropropionic acid (2,2DCP), d,l-2-chloropropionic acid (D,L2CP), l-2-chloropropionic acid (L-2CP), d-2-chloropropionic acid (D-2CP), and glycolate as the sole sources of carbon and energy. Dehalogenase gene amplification using group I primers revealed a 410-bp polymerase chain reaction (PCR) product, but there was none using group II primers. The partial amino acid sequence analysis of group I DehD2 dehalogenase showed at least 32% identity to the corresponding regions of DehE, DhlIV, DehI, and D,L-DEX, with key amino acid residues Ser188, Ala187, and Asp189. These amino acid residues were involved in substrate binding and catalysis and were conserved in the partial amino acid sequence.  相似文献   

15.
16.

Aim

For accurate interpretation of echocardiographic measurements normative data are required, which are provided by guidelines. For this article, the hypothesis was that these cannot be extrapolated to the Dutch population, since in Dutch clinical practice often higher values are found, which may not be pathological but physiological. Therefore this study aimed to 1) obtain and propose normative values for cardiac chamber quantification in a healthy Dutch population and 2) determine influences of baseline characteristics on these measurements.

Methods

Prospectively recruited healthy subjects, aged 20–72 years (at least 28 subjects per age decade, equally distributed for gender) underwent physical examination and 2D and 3D echocardiography. Both ventricles and atria were assessed and volumes were calculated.

Results

147 subjects were included (age 44 ± 14 years, 50% female). Overall, feasibility was good for both linear and volumetric measurements. Linear and volumetric parameters were consistently higher than current guidelines recommend, while functional parameters were in line with the guidelines. This was more so in the older population. 3D volumes were higher than 2D volumes. Gender dependency was seen in all body surface area (BSA) corrected volumes and with increasing age, ejection fractions decreased.

Conclusion

This study provides 2D and 3D echocardiographic reference ranges for both ventricles and atria derived from a healthy Dutch population. BSA indexed volumes are gender-dependent, age did not influence ventricular volumes and a rise in blood pressure was independently associated with increased right ventricular volumes. The higher volumes found may be indicative for the Dutch population being the tallest in the world.
  相似文献   

17.
The starch-rich duckweed Landoltia punctata is a valuable aquatic plant in wastewater purification, bioenergy production, and many other applications. A highly efficient callus induction and plant regeneration protocol is desirable so that biotechnology can be used to develop new varieties with added value and adaptation. We studied both known and unknown factors that influence callus induction in L. punctata and obtained almost 100 % induction rate in 30 days. The optimum medium for callus induction was MS basal medium supplemented with 1 % sorbitol, 15 mg/L 2,4-D, and 2 mg/L 6-BA. Green fragile callus was induced from the meristematic region in the budding pouches. The optimum photoperiod for callus induction was 16-h day, and the optimum explant orientation was dorsal side down on the medium. The optimum medium for callus subculture was WPM basal medium supplemented with 2 % sorbitol, 4 mg/L 2,4-D, and 0.5 mg/L TDZ. Green callus could be maintained by subculture once every 4 weeks. However, when the subculture cycle was prolonged to 6 weeks or longer, yellow fragile embryogenic callus was obtained. The optimum plant regeneration medium was MS medium supplemented with 0.5 % sucrose, 1 % sorbitol, and 1.0 mg/L 6-BA with frond regeneration rates of approximately 90 %. The regenerated fronds rooted in Hoagland’s liquid medium in 1 week. The callus induction and frond regeneration protocol was tested for its efficiency in geographically distinct strains 5502, 8721, and 9264. Thus, we obtained a rapid and efficient protocol for callus induction and frond regeneration of L. punctata, which takes only 9 weeks.  相似文献   

18.
The progressive decline in the hare population across Europe has been associated with the occurrence of European brown hare syndrome (EBHS), a highly contagious disease considered endemic in all European countries. This study aimed to evaluate the in-field temporal dynamics of European brown hare syndrome virus (EBHSV) infection in wild European brown hares (Lepus europaeus) and to test the influence of population density on EBHS seroprevalence. A total of 512 blood samples were collected from free ranging hares captured for restocking in seven different areas of the province of Brescia (Northern Italy) during seven consecutive years (2006–2013) and tested using a competitive ELISA. A generalized linear mixed model estimated the yearly effects of population density on EBHS prevalence. Of the 512 tested, 344 (67.2 %) tested positive for EBHSV antibodies, with the annual seroprevalence ranging from 94.3 to 35.8 %. The prevalence was 3.303 times higher in areas with a density of over 15 hares/km2 and declined over the years. The results indicate the ongoing transmission of the virus in the tested brown hare population. Since the eradication of EBHS in a wild population is not feasible, a strategy aimed at promoting the endemic stability of the virus through density-dependent mechanisms could be applied; however, this seems more difficult in practice than in theory and would most likely require a very high density of brown hares.  相似文献   

19.
In this study, an alga-based simultaneous process of treating swine wastewater (SWW) and producing biodiesel was explored. Chlorella vulgaris (UTEX-265) was employed as a model species, and a SWW-based medium was prepared by dilution with tap water. Chlorella vulgaris grew well in the SWW-based medium, and at optimum dilution ratios, it exceeded the conventional culture medium in terms of biomass concentration and productivity. In eightfold diluted SWW, which supported the maximum growth, biomass productivity was 0.247 g L?1 day?1, while the productivity was merely 0.165 g L?1 day?1 in standard tris-acetate-phosphorous (TAP) algal medium. In addition, fatty acid methyl ester (FAME) productivity was greater in the SWW-based medium (0.067 versus 0.058 g L?1 day?1). This enhanced productivity resulted in more than 95 % removal of both nitrogen and phosphorous. All these show that C. vulgaris cultivation is indeed possible in a nutrient-rich wastewater with appropriate dilution, and in so doing, the wastewater can effectively be treated.  相似文献   

20.
Lumostatic operation was applied for efficient astaxanthin production in autotrophic Haematococcus lacustris cultures using 0.4-L bubble column photobioreactors. The lumostatic operation in this study was performed with three different specific light uptake rates (q e) based on cell concentration, cell projection area, and fresh weight as one-, two- and three-dimensional characteristics values, respectively. The q e value from the cell concentration (q e1D) obtained was 13.5 × 10?8 μE cell?1 s?1, and the maximum astaxanthin concentration was increased to 150 % compared to that of a control with constant light intensity. The other optimum q e values by cell projection area (q e2D) and fresh weight (q e3D) were determined to be 195 μE m?2 s?1 and 10.5 μE g?1 s?1 for astaxanthin production, respectively. The maximum astaxanthin production from the lumostatic cultures using the parameters controlled by cell projection area (2D) and fresh weight (3D) also increased by 36 and 22 % over that of the controls, respectively. When comparing the optimal q e values among the three different types, the lumostatic cultures using q e based on fresh weight showed the highest astaxanthin productivity (22.8 mg L?1 day?1), which was a higher level than previously reported. The lumostatic operations reported here demonstrated that more efficient and effective astaxanthin production was obtained by H. lacustris than providing a constant light intensity, regardless of which parameter is used to calculate the specific light uptake rate.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号