Chemical camouflage of nanospheres with a poorly reactive surface: towards development of stealth and target-specific nanocarriers

A two-step approach is described to chemically camouflage the inert surface of model polystyrene nanospheres of 60 nm in diameter against recognition by the body's defenses. The first step was based on the strong protein adsorbing potency of polystyrene, and the second step utilized the chemical reactivity of the adsorbed proteins for conjugation with cyanuric chloride-activated methoxypoly(ethyleneglycol)5000, mPEG5000. Bovine serum albumin (BSA) and rat IgG were used as models of non-immune and immune proteins, respectively. The maximum adsorbance values for both proteins were near expectation for a close-packed monolayer. Adsorption isotherms studies and analysis of the hydrodynamic thickness of the adsorbed protein layer confirmed the close-packed side-on mode of adsorption for BSA and the end-on mode of adsorption for IgG, respectively. Nucleophiles on the adsorbed proteins were then reacted with cyanuric chloride activated mPEG5000. The average poly(ethyleneglycol) (PEG) content for a 60-nm nanospheres was found to be 13.7+/-0.4 micromol PEG/micromol BSA and 3.6+/-0.3 micromol PEG/micromol IgG. The interaction of both PEG-bearing nanospheres with the hydrophobic column material octyl-agarose indicated surface heterogeneity among the nanospheres. Only nanospheres with the most hydrophilic phenotype (approximately 70% of the total population) exhibited stealth properties after intravenous injection to rats. In contrast to the described approach, incubation of uncoated nanospheres with preformed BSA-mPEG5000 conjugates failed to produce long circulating entities. For design of splenotropic particles cyanuric chloride-activated mPEG5000 was conjugated to BSA-coated polystyrene beads of 225 nm in diameter. Despite their stealth property to hepatic Kupffer cell recognition, these nanospheres were cleared by the splenic red pulp macrophages.     

Chemisorption of proteins and their thiol derivatives onto gold surfaces: characterization based on electrochemical nonlinearity

This study was conducted to monitor the electrochemical responses of two proteins (bovine serum albumin (BSA) and gelatin) and their thiol derivatives adsorbed onto gold (Au) electrodes, which were analyzed by a "nonlinear" impedance method. A sinusoidal voltage is applied to a protein-containing aqueous solution and the waveform of the output current is analyzed by fast Fourier transformation (FFT). The intensities of the higher harmonics in the FFT varied with the species of protein and their thiol derivatives, and with time. From the higher harmonics, voltage-dependent capacitance and conductance were quantitatively evaluated to differentiate the state of adsorbed protein. Adsorption and desorption characteristics of BSA and its thiol derivative on the Au surface were continuously measured by a quartz crystal microbalance (QCM) in situ. The microscopic state of thiol-derivatized BSA adsorbed onto the Au surface was imaged by atomic force microscopy (AFM). In general, thiol-derivatized proteins were tightly adsorbed on the Au surface and showed no desorption. The present electrochemical measurements clearly differentiated adsorption characteristics of physically adsorbed (physisorbed) and chemically adsorbed (chemisorbed) proteins on Au surfaces.     

Circular dichroism studies on conformational changes in protein molecules upon adsorption on ultrafine polystyrene particles

The conformational changes in well-characterized model proteins [bovine ribonuclease A (RNase A), horseradish peroxidase, sperm-whole myoglobin, human hemoglobin, and bovine serum albumin (BSA)] upon adsorption on ultrafine polystyrene (PS) particles have been studied using circular dichroism (CD) spectroscopy. These proteins were chosen with special attention to molecular flexibility. The ultrafine PS particles were negatively charged and have average diameters of 20 or 30 nm. Utilization of these ultrafine PS particles makes it possible to apply the CD technique to determine the secondary structure of proteins adsorbed on the PS surface. Effects of protein properties and adsorption conditions on the extent of the changes in the secondary structure of protein molecules upon adsorption on ultrafine PS particles were studied. The CD spectrum changes upon adsorption were significant in the "soft" protein molecules (myoglobin, hemoglobin, and BSA), while they were insingnificant in the "rigid" proteins (RNase A and peroxidase). The soft proteins sustained a marked decrease in alpha-helix content upon adsorption. Moreover, the native alpha-helix content, which is given as the percentage of the alpha-helix content in the free proteins, of adsorbed BSA was found to decrease with decreasing pH and increase with increasing adsorbed amount. These observations confirm some well-known hypotheses for the confirmational chages in protein molecules upon adsorption. (c) 1992 John Wiley & Sons, Inc.     

Preparation of bovine hemoglobin surface molecularly imprinted cotton for selective protein recognition

We have developed a bovine hemoglobin (BHb) surface molecularly imprinted cotton based on degreasing cotton via surface imprinting technique for the efficient selective adsorption of BHb. The morphological structure of the samples was characterized by Scanning Electron Microscopy (SEM), and the chemical modification steps were characterized by Fourier Transform Infrared Spectroscopy (FTIR). The maximum adsorption capacity of the molecularly imprinted cotton (MIC) and non-imprinted cotton (NIC) for BHb was 62.95 mg/g and 8.32 mg/g, respectively, at the optimum pH value of 6.2. The kinetics studies demonstrated that the adsorption follows a pseudo-first-order kinetic model. The adsorption isotherm analysis indicated that the Langmuir adsorption isotherm fits well with the adsorption equilibrium data. Also, the selective adsorption shows the MIC has a good selectivity for BHb. In addition, the assessment of the reusability of the MIC was tested for five successive cycles revealed no significant decrease of the adsorption capacity. Electrophoretic analysis suggests the MIC were successfully applied to capture template proteins from the bovine blood sample.     

Applicability of airlift draft-tube fluidized bioreactors for binary protein mixture bioseparation

An airlift draft-tube fluidized bioreactor has been designed and tested for applications in protein bioseparation. Operating parameters and geometrical dimensions of the bioreactor were optimized to ensure fluid circulation in a defined cyclic pattern between the riser and the downcomer. The overall directionality of liquid flow generates homogeneous field of low shear and achieves good mixing efficiency. Bioseparation of proteins was achieved from solutions containing both BSA and BHb at different initial concentrations and at pH 7. Similar adsorption capacities of both proteins were observed in single protein adsorption experiments at pH 7. Compressibility of BHb allowed for high adsorption capacity, in addition to the hydrophobic interaction forces. Apparently the homogeneous and lower shear generated by the airlift bioreactor reduces the compressibility of adsorbed BHb. This allowed for higher BSA adsorption from solutions containing BSA and BHb mixtures. Conventional batch adsorption experiments showed more adsorption of BHb, which reduces bioseparation efficiency.     

Use of a novel affinity tag selected with a bacterial random peptide library for improving activity retention of glutathione S-transferase adsorbed on a polystyrene surface

Aiming at developing a novel affinity tag for site-specific immobilization of functional proteins onto polystyrene (PS) surfaces, Escherichia coli random peptide display library was screened for dodecapeptides exhibiting a high affinity toward PS plates. The selected peptides were commonly rich in hydrophobic amino acid residues and had two or three basic amino acid residues. Adsorption and desorption experiments for one of the selected peptide named PS1 (KGLRGWREMISL) showed that it was well and irreversibly adsorbed onto PS latex particles. To study its performance as an affinity tag, PS1 was genetically fused to a model enzyme, glutathione S-transferase (GST), in several manners, and the fusion enzymes were compared to the original GST in terms of the adsorption behavior onto the PS latex particles as well as the specific activities before and after the adsorption. The fusion GSTs in solution showed lower specific activities than the original one, and their adsorption behaviors were also altered. In particular, the fusion of PS1 to the N-terminal region of GST resulted in severe losses both in the specific activity and in the adsorptive ability. However, two types of GSTs fused with PS1 at the C-terminal region were well adsorbed onto the PS latex particles, and their specific activities after the adsorption were significantly higher than the original GST adsorbed on the PS latex particles. The fusion of PS1 to the C-terminal region of GST was thus shown to reduce the activity loss upon the adsorption onto the PS latex particles.     

Protein interactions with nanosized hydrotalcites of different composition

Nanosized hydrotalcite-like compounds (HTlc) with different chemical composition were prepared and used to study protein adsorption. Two soft proteins, myoglobin (Mb) and bovine serum albumin (BSA), were chosen to investigate the nature of the forces controlling the adsorption and how these depend on the chemical composition of the support. Both proteins strongly interact with HTlc exhibiting in most cases a Langmuir-type adsorption. Mb showed a higher affinity for Nickel Chromium (NiCr-HTlc) than for Nickel Aluminum (NiAl-HTlc), while for BSA no significant differences between supports were found. Adsorption experiments in the presence of additives showed that proteins exhibited different types of interactions onto the same HTlc surface and that the adsorption was strongly suppressed by the addition of disodium hydrogen phosphate (Na₂HPO₄). Atomic force microscopy images showed that the adsorption of both proteins onto nanoparticles was followed by the aggregation of biocomposites, with a more disordered structure for BSA. Fluorescence measurements for adsorbed Mb showed that the inorganic nanoparticles induced conformational changes in the biomolecules; in particular, the interactions with HTlc surface quenched the tryptophan fluorescence and this process was particularly efficient for NiCr-HTlc. The adsorption of BSA onto the HTlc nanoparticles induced a selective quenching of the exposed fluorescent residues, as indicated by the blue-shift of the emission spectra of tryptophan residues and by the shortening of the fluorescence decay times.     

Thickness and density of protein films by optical mixing spectroscopy.

The adsorption of protein films on polystyrene latex spheres was studied by optical mixing spectroscopy. With this technique, we show that both the hydrodynamic thickness of protein films and their optical density can be measured. Thus, we found that films of the glycoproteins isolated from the human erythrocyte membrane were four times as thick as films of either human serum albumin or bovine serum albumin for about the same surface coverage. This result suggests an end-on orientation for the adsorbed glycoprotein molecules, which is consistent with the model proposed by others for the orientation of these molecules at the surface of the red blood cell itself.     

Copolymers including L-histidine and hydrophobic moiety for preparation of nonbiofouling surface

A new type of copolymer composed of l-histidine (ampholyte) and n-butyl methacrylate (hydrophobic moiety) was developed for the preparation of nonbiofouling surfaces. The copolymer adsorbed onto resin surfaces and made the surface very hydrophilic. The hydrophilization effect was higher than that of bovine serum albumin (BSA). When polystyrene surfaces were coated with the copolymer, both the nonspecific adsorption of protein and the adhesion of cells were significantly reduced in comparison with BSA coating. The newly synthesized polymer is a new and useful candidate for the preparation of nonbiofouling surfaces.     

Sequential adsorption of F(ab')(2) and BSA on negatively and positively charged polystyrene latexes

The aim of the present work is to study the sequential adsorption of F(ab')(2) and bovine serum albumin (BSA) molecules adsorbed onto positively and negatively charged polystyrene latexes. Cationic and anionic latexes were prepared by emulsifier-free emulsion polymerization. Adsorptions of F(ab')(2) on both latexes at a low ionic strength and different pHs were performed. The cationic latex showed a higher adsorption of F (ab')(2) molecules over a range of pH, which could be due to the formation of multilayers. Sequential adsorption of anti-CRP F(ab')(2) and monomeric BSA were performed at two different pre-adsorbed F(ab')(2) amounts on both types of latex. Displacement of F(ab')(2) occurred only when the preadsorbed amounts were larger than a certain critical value, which depends on the adsorption pH. A greater displacement of larger preadsorbed amounts might be the result of a weaker contact between the protein molecules and the polystyrene surface. The displacement of F(ab')(2) previously adsorbed onto both latexes occurred due to pH changes, an increase of ionic strength and the presence of BSA molecules. The effect caused by these three factors was studied independently. The main factors in the desorption of F(ab')(2) on the anionic latex are the changes in pH and ionic strength, whereas on the cationic latex the desorption is mainly caused by the increase of the ionic strength and the presence of BSA. The colloidal stability of the immunotatex was improved by BSA adsorption, especially on cationic latex. (c) 1995 John Wiley & Sons, Inc.     

Bioactive surfaces via immobilization of self-assembling polymers onto hydrophobic materials.

Conjugation of proteins to copolymers from poly(acrylic acid) grafted onto PEO-PPO-PEO backbone (Pluronic-PAA) following adsorption of the conjugates onto hydrophobic surfaces is reported. Insulin-Pluronic-PAA conjugates show negligible internalization of insulin into human uterine smooth muscle cells as well as enhancement of mitogenic activity. Glucose-induced release of glycated albumin complexed with a Pluronic-PAA-concanavalin conjugate and adsorbed onto polystyrene nanospheres may provide a model for a glucose-responsive protein delivery system or a heterogeneous diagnostic device.     

PM-IRRAS investigation of the interaction of serum albumin and fibrinogen with a biomedical-grade stainless steel 316LVM surface

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was applied to investigate the interaction of bovine serum albumin (BSA) and fibrinogen with a biomedical-grade 316LVM stainless steel surface, in terms of the adsorption thermodynamics and adsorption-induced secondary structure changes of the proteins. Highly negative apparent Gibbs energy of adsorption values revealed a spontaneous adsorption of both proteins onto the surface, accompanied by significant changes in their secondary structure. It was determined that, at saturated surface coverages, lateral interactions between the adsorbed BSA molecules induced rather extensive secondary structure changes. Fibrinogen's two coiled coils appeared to undergo negligible secondary structure changes upon adsorption of the protein, while large structural rearrangements of the protein's globular domains occurred upon adsorption. The secondary structure of adsorbed fibrinogen was not influenced by lateral interactions between the adsorbed fibrinogen molecules. PM-IRRAS was deemed to be viable for investigating protein adsorption and for obtaining information on adsorption-induced changes in their secondary structures.     

Adsorption of bovine hemoglobin onto spherical polyelectrolyte brushes monitored by small-angle X-ray scattering and Fourier transform infrared spectroscopy

The adsorption of bovine hemoglobin (BHb) onto colloidal spherical polyelectrolyte brushes (SPBs) is studied by a combination of small-angle X-ray scattering (SAXS) and Fourier transform infrared spectroscopy (FTIR). The SPBs consist of a polystyrene core onto which long chains of poly(styrene sulfonic acid) are grafted. Hemoglobin is a tetrameric protein that disassembles at low pH's and high ionic strengths. The protein is embedded into the brush layer composed of strong polyacids. Thus, the protein is subjected to a pH and ionic strength that largely differs from the bulk solution. At low ionic strengths up to 650 mg of BHb per gram of SPB could be immobilized. The analysis of the particles loaded with protein by SAXS demonstrates that the protein enters deeply into the brush. A large fraction of hemoglobin is bound at the surface of the polystyrene core. We attribute this strong affinity to hydrophobic interactions between the protein and the polystyrene core. The other protein molecules are closely correlated with the polyelectrolyte chains. The secondary structure of the protein within the brush was studied by FTIR spectroscopy. The analysis revealed a significant disturbance of the secondary structure of the tetrameric protein. The content of alpha-helix is significantly lowered compared to the native conformation. Moreover, there is an increase of beta-sheet structure as compared to the native conformation. The partial loss of the structural integrity of the hydrophobic protein is due to hydrophobic interactions with the hydrophobic polystyrene core. Hydrophobic interactions with the phenyl groups of the poly(styrene sulfonate) chains influence the secondary structure as well. These findings indicate that changes of the secondary structure play a role in the uptake of hemoglobin into the poly(styrene sulfonate) brushes.     

Staphylococcus aureus-Fibronectin Interactions with and without Fibronectin-Binding Proteins and Their Role in Adhesion and Desorption

Adhesion and residence-time-dependent desorption of two Staphylococcus aureus strains with and without fibronectin (Fn) binding proteins (FnBPs) on Fn-coated glass were compared under flow conditions. To obtain a better understanding of the role of Fn-FnBP binding, the adsorption enthalpies of Fn with staphylococcal cell surfaces were determined using isothermal titration calorimetry (ITC). Interaction forces between staphylococci and Fn coatings were measured using atomic force microscopy (AFM). The strain with FnBPs adhered faster and initially stronger to an Fn coating than the strain without FnBPs, and its Fn adsorption enthalpies were higher. The initial desorption was high for both strains but decreased substantially within 2 s. These time scales of staphylococcal bond ageing were confirmed by AFM adhesion force measurement. After exposure of either Fn coating or staphylococcal cell surfaces to bovine serum albumin (BSA), the adhesion of both strains to Fn coatings was reduced, suggesting that BSA suppresses not only nonspecific but also specific Fn-FnBP interactions. Adhesion forces and adsorption enthalpies were only slightly affected by BSA adsorption. This implies that under the mild contact conditions of convective diffusion in a flow chamber, adsorbed BSA prevents specific interactions but does allow forced Fn-FnBP binding during AFM or stirring in ITC. The bond strength energies calculated from retraction force-distance curves from AFM were orders of magnitude higher than those calculated from desorption data, confirming that a penetrating Fn-coated AFM tip probes multiple adhesins in the outermost cell surface that remain hidden during mild landing of an organism on an Fn-coated substratum, like that during convective diffusional flow.     

Adsorption-desorption of BSA to highly substituted dye-ligand adsorbent: quantitative study of the effect of ionic strength

Cibacron Blue 3GA was immobilized on Sepharose CL-6B to obtain a highly substituted dye-ligand adsorbent which dye concentration was 17.4?μmol dye per gram wet gel. This adsorbent had a highly binding capacity for bovine serum albumin (BSA). The effects of ionic strength on the adsorption and desorption of BSA to the adsorbent were studied. Adsorption isotherms were expressed by the Langmuir model. The quantitative relationships between the model parameters and the ionic strength were obtained. The desorptions were performed by adding salt to the BSA solutions in which adsorption equilibria had been reached. Adding salt to the solution resulted in the desorption of the bound protein. It was found that the isotherm obtained from the desorption experiments agreed well to the isotherm obtained from the adsorption experiments at the same ionic strength. The result demonstrated that the adsorption of BSA to the highly substituted adsorbent was reversible.     

Adsorption of a xylanase purified from Pulpzyme HC onto alkali-lignin and crystalline cellulose

Adsorption of a xylanase purified from a commercial xylanase, Pulpzyme HC, onto two model components of kraft pulp, crystalline cellulose (Avicel) and alkali-lignin (Indulin AT), was studied at 40°C. A considerable amount of the purified xylanase was adsorbed onto alkali-lignin in alkaline solutions. The adsorption of the purified xylanase onto crystalline cellulose was not significant and could be described by the Langmuir-type adsorption isotherm. The adsorption of the purified xylanase onto alkali-lignin was assumed to be caused by physical or van der Waals interaction based on the result that NaCl did not change the adsorption isotherm. © Rapid Science Ltd. 1998     

Protective effects of non-catalytic proteins on endoglucanase activity at air and lignin interfaces

The manner in which added non-catalytic proteins during enzymatic hydrolysis of lignocellulosic substrates enhances hydrolysis mechanisms is not completely understood. Prior research has indicated that a reduction in the non-specific adsorption of enzymes on lignin, and deactivation of enzymes exposed to air–liquid interface provide rationale. This work investigated root causes including effects of the air–liquid interface on non-catalytic proteins, and effects of lignin on endoglucanase. Three different experimental designs and three variables (air–liquid interfacial area, the types of lignin (acid or enzymatic lignin), and the presence of non-enzymatic protein (bovine serum albumin [BSA] or soy proteins ) were used. The results showed that acid isolated lignin adsorbed almost all endoglucanase activity initially present in supernatant, independent of air interface conditions (25 or 250 ml flasks) with the presence of BSA preventing this effect. Endoglucanase lost 30%–50% of its activity due to an air–liquid interface in the presence of lignin while addition of non-enzymatic protein helped to preserve this enzyme's activity. Langmuir and Freundlich models applied to experimental data indicated that the adsorption increases with increasing temperature for both endoglucanase and BSA. Adsorption of the enzyme and protein were endothermic with an increase in entropy. These results, combined, show that hydrophobicity plays a strong role in the adsorption of both endoglucanase and BSA on lignin.     

Adsorption of proteins onto glass surfaces and its effect on the intensity of circular dichroism spectra

Errors in analyzing CD spectra of proteins arising from adsorption loss onto glass surfaces were examined for six proteins: apolipoproteins A-I and E, fibronectin, bovine serum albumin, insulin, and glucagon. Among these, the glycoproteins, apolipoprotein E and fibronectin, adsorbed most onto glass surfaces. Their CD intensities decreased by about 50% when proteins were diluted serially from 1 to 0.01 mg/ml in regular glass-ware and CD was measured in uncoated cells. The other proteins, except glucagon, also showed a certain degree of adsorption. Thus, adsorption loss of proteins onto glass surfaces is common and may lead to serious errors in experimental results. Adsorption can be minimized by using plastic containers and pipet tips, coating the cell with silicone, and wetting the cell before adding the protein solution.     

Activity,conformation and dynamics of cutinase adsorbed on poly(methyl methacrylate) latex particles

The adsorption of a recombinant cutinase from Fusarium solani pisi onto the surface of 100 nm diameter poly(methyl methacrylate) (PMMA) latex particles was evaluated. Adsorption of cutinase is a fast process since more than 70% of protein molecules are adsorbed onto PMMA at time zero of experiment, irrespective of the tested conditions. A Langmuir-type model fitted both protein and enzyme activity isotherms at 25 degrees C. Gamma(max) increased from 1.1 to 1.7 mg m(-2) and U(max) increased from 365 to 982 U m(-2) as the pH was raised from 4.5 to 9.2, respectively. A decrease (up to 50%) in specific activity retention was observed at acidic pH values (pH 4.5 and 5.2) while almost no inactivation (eta(act) congruent with 87-94%) was detected upon adsorption at pH 7.0 and 9.2. Concomitantly, far-UV circular dichroism (CD) spectra evidenced a reduction in the alpha-helical content of adsorbed protein at acidic pH values while at neutral and alkaline pH the secondary structure of adsorbed cutinase was similar to that of native protein. Fluorescence anisotropy decays showed the release of some constraints to the local motion of the Trp69 upon protein adsorption at pH 8.0, probably due to the disruption of the tryptophan-alanine hydrogen bond when the tryptophan interacts with the PMMA surface. Structural data associated with activity measurements at pH 7.0 and 9.2 showed that cutinase adsorbs onto PMMA particles in an end-on orientation with active site exposed to solvent and full integrity of cutinase secondary structure. Hydrophobic interactions are likely the major contribution to the adsorption mechanism at neutral and alkaline pH values, and a higher amount of protein is adsorbed to PMMA particles with increasing temperature at pH 9.2. The maximum adsorption increased from 88 to 140 mg cutinase per g PMMA with temperature raising from 25 to 50 degrees C, at pH 9.2.     

The influence of radioiodination on the adsorption of IgG and serum albumin to polystyrene

The adsorption of radioiodinated rabbit IgG and bovine serum albumin (BSA) to polystyrene tubes was investigated. Adsorption isotherms where the proportion of the protein bound was relatively constant over a range of intermediate protein concentrations, and where the proportion bound was protein dependent, were obtained. To investigate the effects of radioiodination, proteins labeled to give a wide range of substitution ratios (0.03 to 3.7 125I/protein molecule) were employed. While labeling did not appear to affect BSA adsorption, the kinetics of IgG binding were altered in a number of ways. The proportion bound in the concentration independent region was decreased even at substitution ratios less than or equal to 0.2. In addition, while all preparations of iodinated BSA, and IgG preparations with less than or equal to 1.6 125I/IgG, gave bimodal adsorption isotherms, with more heavily labeled IgG (greater than or equal to 2.5 125I/IgG) the apparent high affinity binding to the plastic surface was abolished. These results indicate that radioiodination substantially alters the kinetics of the binding of IgG to polystyrene. In addition, the results obtained are discussed with respect to previous relevant and often apparently contradictory findings.