首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
The biosorption characteristics of Pb(II) and Cr(III) ions from aqueous solution using the lichen (Parmelina tiliaceae) biomass were investigated. Optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by P. tiliaceae biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The monolayer biosorption capacity of P. tiliaceae biomass for Pb(II) and Cr(III) ions was found to be 75.8 mg/g and 52.1mg/g, respectively. From the D-R isotherm model, the mean free energy was calculated as 12.7 kJ/mol for Pb(II) biosorption and 10.5 kJ/mol for Cr(III) biosorption, indicating that the biosorption of both metal ions was taken place by chemical ion-exchange. The calculated thermodynamic parameters (delta G degrees , delta H degrees and delta S degrees ) showed that the biosorption of Pb(II) and Cr(III) ions onto P. tiliaceae biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both metal ions followed well pseudo-second-order kinetics.  相似文献   

2.
3.
Akar T  Tunali S 《Bioresource technology》2006,97(15):1780-1787
The Pb(II) and Cu(II) biosorption characteristics of Aspergillus flavus fungal biomass were examined as a function of initial pH, contact time and initial metal ion concentration. Heat inactivated (killed) biomass was used in the determination of optimum conditions before investigating the performance of pretreated biosorbent. The maximum biosorption values were found to be 13.46 +/- 0.99 mg/g for Pb(II) and 10.82 +/- 1.46 mg/g for Cu(II) at pH 5.0 +/- 0.1 with an equilibrium time of 2 h. Detergent, sodium hydroxide and dimethyl sulfoxide pretreatments enhanced the biosorption capacity of biomass in comparison with the heat inactivated biomass. The biosorption data obtained under the optimum conditions were well described by the Freundlich isotherm model. Competitive biosorption of Pb(II) and Cu(II) ions was also investigated to determine the selectivity of the biomass. The results indicated that A. flavus is a suitable biosorbent for the removal of Pb(II) and Cu(II) ions from aqueous solution.  相似文献   

4.
Biosorption is potentially an attractive technology for treatment of wastewater for retaining heavy metals from dilute solutions. This study investigated the feasibility of anaerobic granules as a novel type of biosorbent, for lead, copper, cadmium, and nickel removal from aqueous solutions. Anaerobic sludge supplied from a wastewater treatment plant in the province of Quebec was used. Anaerobic granules are microbial aggregates with a strong, compact and porous structure and excellent settling ability. After treatment of the biomass with Ca ions, the cation exchange capacity of the biomass was approximately 111 meq/100 g of biomass dry weight which is comparable to the metal binding capacities of commercial ion exchange resins. This work investigated the equilibrium, batch dynamics for the biosorption process. Binding capacity experiments using viable biomass revealed a higher value than those for nonviable biomass. Binding capacity experiments using non-viable biomass treated with Ca revealed a high value of metals uptake. The solution initial pH value affected metal sorption. Over the pH range of 4.0-5.5, pH-related effects were not significant. Meanwhile, at lower pH values the uptake capacity decreased. Time dependency experiments for the metal ions uptake showed that adsorption equilibrium was reached almost 30 min after metal addition. It was found that the q(max) for Pb2+, Cd2+, Cu2+, and Ni2+ ions, were 255, 60, 55, and 26 mg/g respectively (1.23, 0.53, 0.87, and 0.44 mmol/g respectively). The data pertaining to the sorption dependence upon metal ion concentration could be fitted to a Langmiur isotherm model. Based on the results, the anaerobic granules treated with Ca appear to be a promising biosorbent for removal of heavy metals from wastewater due to its optimal uptake of heavy metals, its particulate shape, compact porous structure, excellent settling ability, and its high mechanical strength.  相似文献   

5.
The biosorption from artificial wastewaters of heavy metals (Cd(II), Pb(II) and Cu(II)) onto the dry fungal biomass of Phanerochaete chryosporium was studied in the concentration range of 5-500 mg l(-1). The maximum absorption of different heavy metal ions on the fungal biomass was obtained at pH 6.0 and the biosorption equilibrium was established after about 6 h. The experimental biosorption data for Cd(II), Pb(II) and Cu(II) ions were in good agreement with those calculated by the Langmuir model.  相似文献   

6.
The biosorption of Pb(II), Cd(II), and Co(II), respectively, from aqueous solution on green algae waste biomass was investigated. The green algae waste biomass was obtained from marine green algae after extraction of oil, and was used as low-cost biosorbent. Batch shaking experiments were performed to examine the effects of initial solution pH, contact time and temperature. The equilibrium biosorption data were analyzed using two isotherm models (Langmuir and Freundlich) and two kinetics models (pseudo-first order and pseudo-second order). The results indicate that Langmuir model provide best correlation of experimental data, and the pseudo-second order kinetic equation could best describe the biosorption kinetics of considered heavy metals.  相似文献   

7.
Biosorption of Pb(II) and Cu(II) ions in single component and binary systems was studied using activated sludge in batch and continuous-flow stirred reactors. In biosorption experiments, the activated sludge in three different phases of the growth period was used: growing cells; resting cells; dead or dried cells. Because of the low adsorption capacity of the non-viable activated sludge especially in the case of Pb(II) ions, biosorption of the Cu(II) and Pb(II) ions from the binary mixtures was carried out by using the resting cells. The biosorption data fitted better with the Freundlich adsorption isotherm model. Using a mathematical model based on continuous system mass balance for the liquid phase and batch system mass balance for the solid phase, the forward rate constants for biosorption of Pb(II) and Cu(II) ions were 0.793 and 0.242 1 (mmolmin)(-1), respectively.  相似文献   

8.
The performance of a new biosorbent system, consisting of a fungal biomass immobilized within an orange peel cellulose absorbent matrix, for the removal of Zn(2+) heavy metal ions from an aqueous solution was tested. The amount of Zn(II) ion sorption by the beads was as follows; orange peel cellulose with Phanerochaete chrysosporium immobilized Ca-alginate beads (OPCFCA) (168.61 mg/g) > orange peel cellulose immobilized Ca-alginate beads (OPCCA) (147.06 mg/g) > P. chrysosporium (F) (125.0 mg/g) > orange peel cellulose (OPC) (108.70 mg/g) > plain Ca-alginate bead (PCA) (98.26 mg/g). The Zn(2+) concentration was 100 to 1000 mg/L. The widely used Langmuir and Freundlich isotherm models were utilized to describe the biosorption equilibrium process. The isotherm parameters were estimated using linear and non-linear regression analysis. The Box-Behnken model was found to be in close agreement with the experimental values, as indicated by the correlation coefficient value of 0.9999.  相似文献   

9.
This study investigates the equilibrium, kinetics and thermodynamics of Nickel(II) biosorption from aqueous solution by the fungal mat of Trametes versicolor (rainbow) biomass. The optimum biosorption conditions like pH, contact time, biomass dosage, initial metal ion concentration and temperaturewere determined in the batch method. The biosorbent was characterized by FTIR, SEM and BET surface area analysis. The experimental data were analyzed in terms of pseudo-first-order, pseudo-secondorder and intraparticle diffusion kinetic models, further it was observed that the biosorption process of Ni(II) ions closely followed pseudo-second-order kinetics. The equilibrium data of Ni(II) ions at 303, 313, and 323 K were fitted to the Langmuir and Freundlich isotherm models. Langmuir isotherm provided a better fit to the equilibrium data andthe maximum monolayer biosorption capacity of the T. versicolor(rainbow) biomass for Ni(II) was 212.5 mg/g at pH 4.0. The calculated thermodynamic parameters, ΔG, ΔH, and ΔS, demonstrated that the biosorption of Ni(II) ions onto the T. versicolor (rainbow) biomass was feasible, spontaneous and endothermic at 303 ~ 323 K. The performance of the proposed fungal biosorbent was also compared with that of many other reported sorbents for Nickel(II) removal and it was observed that the proposed biosorbent is effective in terms of its high sorption capacity.  相似文献   

10.
AIMS: The aim was to develop a new, efficient and cost-effective biosorbent for the removal of heavy metals from aqueous solution. METHODS AND RESULTS: A new biosorbent was developed by immobilizing a unicellular green microalga Chlorella sorokiniana within luffa sponge discs and used for the removal of metal ions from aqueous solution. Microalgal-luffa sponge immobilized discs (MLIDs) removed Ni(II) very rapidly, with 97% of equilibrium loading being reached in 5 min. MLIDs were tested for their potential to remove Ni(II) from aqueous solution in fixed-bed column bioreactor. The regenerated MLIDs retained 92.9% of the initial binding capacity for Ni(II) up to five cycles of reuse. CONCLUSIONS: In this study for the first time, C. sorokiniana biomass immobilized within luffa sponge disc was successfully used as a metal biosorbent for the removal of Ni(II). It appears that MLIDs can be used as an effective biosorbent for efficient removal of Ni(II) or other metals from aqueous solution. SIGNIFICANCE AND IMPACT OF THE STUDY: MLIDs biosorption system was shown to have good biosorption properties with respect to Ni(II). Efficient metal removal ability of MLIDs, low cost and simplicity of the technique used for the preparation of MILDs could provide an attractive strategy for developing high-affinity biosorption system for heavy metal removal.  相似文献   

11.
Lee YC  Chang SP 《Bioresource technology》2011,102(9):5297-5304
The aim of this research was to develop a low cost adsorbent for wastewater treatment. The prime objective of this study was to search for suitable freshwater filamentous algae that have a high heavy metal ion removal capability. This study evaluated the biosorption capacity from aqueous solutions of the green algae species, Spirogyra and Cladophora, for lead (Pb(II)) and copper (Cu(II)). In comparing the analysis of the Langmuir and Freundlich isotherm models, the adsorption of Pb(II) and Cu(II) by these two types of biosorbents showed a better fit with the Langmuir isotherm model. In the adsorption of heavy metal ions by these two types of biosorbents, chemical and physical adsorption of particle surfaces was perhaps more significant than diffusion and adsorption between particles. Continuous adsorption-desorption experiments discovered that both types of biomass were excellent biosorbents with potential for further development.  相似文献   

12.
This study demonstrates highest biosorption of Fe followed by Ni and Cr by Microcystis in single, bi and trimetallic combination. Fe was not only preferentially adsorbed from the metal mixtures but Ni and Cr failed to decrease its biosorption. The agreement of the data of Fe biosorption with the Langmuir model suggested monolayer sorption and existence of constant sorption energy during the experimental conditions. In contrast to Fe biosorption, Ni and Cr sorption followed the Freundlich isotherm; this demonstrates a multilayer biosorption of the two metals. IR analysis of Microcystis cells confirmed the presence of a large number of -COO(-) and some amino groups in the Microcystis cell wall. The oxygen and nitrogen donor atoms from carboxyl and amino groups were found to play a vital role in metal biosorption by Microcystis cell walls, and ion exchange mechanisms were involved in the biosorption of test metals. Extra peaks present in Ni and Cr treated cells implied that amino groups are more responsible for Ni and Cr biosorption.  相似文献   

13.
Silica gel/chitosan composite (SiCS) was prepared via., sol-gel method by mixing silica gel and chitosan and cross-linked with bifunctional cross-linker glutaraldhyde. The SiCS composite was characterized using FT-IR, SEM-EDAX, XRD and BET methods. The sorption of copper and lead ions onto SiCS has been investigated. The SiCS composite was found to have excellent metal sorption capacity than the silica gel (Si) and chitosan (CS). The sorption experiments were carried out in batch mode to optimize various parameters viz., contact time, pH, initial metal ion concentration, co-ions and temperature that influence the sorption. Langmuir, Freundlich and Dubinin-Radushkevich adsorption isotherm models were applied to describe isotherm constants. Equilibrium data agreed well with the Freundlich isotherm model. Thermodynamic studies revealed that the nature of sorption is spontaneous and endothermic. The SiCS removes metals by means of adsorption and complexation. Sorption capacity of SiCS is compared with other sorbents which suggest that this composite was useful for removing copper and lead from aqueous solution.  相似文献   

14.
Biosorption of cadmium (II) ions from aqueous solution onto immobilized cells of Pycnoporus sanguineus (P. sanguineus) was investigated in a batch system. Equilibrium and kinetic studies were conducted by considering the effect of pH, initial cadmium (II) concentration, biomass loading and temperature. Results showed that the uptake of cadmium (II) ions increased with the increase of initial cadmium (II) concentration, pH and temperature. Langmuir, Freundlich and Redlich-Peterson isotherm models were used to analyze the equilibrium data at different temperatures. Langmuir isotherm model described the experimental data well followed by Redlich-Peterson and Freundlich isotherm models. Biosorption kinetics data were fitted using pseudo-first, pseudo-second-order and intraparticle diffusion. It was found that the kinetics data fitted well the pseudo-second-order followed by intraparticle diffusion. Thermodynamic parameters such as standard Gibbs free energy (Delta G0), standard enthalpy (Delta H0) and standard entropy (Delta S0) were evaluated. The result showed that biosorption of cadmium (II) ions onto immobilized cells of P. sanguineus was spontaneous and endothermic nature.  相似文献   

15.
Biosorption is the process of removal of any chemical molecules by the treatment of biological material. Industrialization resulted in the discharge of various toxic heavy metals into water bodies, which poses serious health hazards to humans and animals. In the present study, live Spirulina platensis was used as a biosorbent for the removal of the heavy metals chromium (Cr(VI)) and lead (Pb(II)) from the aqueous samples. S. platensis were cultured in the presence of different concentrations of heavy metals. The growth of the algal cells was found to be decreased by 59% and 36% in media containing 50 ppm Cr(VI) and Pb(II), respectively. To assess the biosorption of heavy metals, at different time intervals, the spent culture media were used to detect Cr(VI) by atomic absorption spectroscopy method and Pb(II) by 4-(2-pyridylazo)resorcinol indicator method. Results suggested that there was a significant uptake of Cr(VI) and Pb(II) from the medium by S. platensis, with corresponding decrease of metals in the medium. When metal salt solutions or industrial effluent samples were passed through the column containing immobilized live S. platensis in calcium alginate beads, the concentration of Cr(VI) was found to be reduced drastically. The present study indicates the application of S. platensis for the bioremediation of heavy metals from the samples obtained from industrial effluents.  相似文献   

16.
In this study, it was considered that the biosorption of heavy metals by biomass might occur during the bioleaching of fly ash. This work is focused on the biosorption behavior of Al, Fe, Pb and Zn by Aspergillus niger during the bioleaching process. The fungal biomass was contacted with heavy metals solution which extracted from fly ash by using gluconic acid as leaching agent. The equilibrium time for biosorption was about 120 min. The biosorption experiment data at initial pH 6.5 was used to fit the biosorption kinetics and isotherm models. The results indicated that the biosorption of Al, Fe and Zn by A. niger biomass were well described by the pseudo-first order kinetic model. The pseudo-second order kinetic model was more suitable for that of Pb. The Langmuir isotherm model could well describe the biosorption of Fe, Pb and Zn while the Freundlich model could well describe the biosorption of Al. Furthermore, the biosorption of metal ions decreased evidently in the presence of fly ash as compared to that in the absence of fly ash. This research showed that although the biomass sorption occurred during the bioleaching process, it did not inhibit the removal of Al, Fe, Pb and Zn evidently from fly ash.  相似文献   

17.
In this study, a low-cost biosorbent, dead mushroom biomass (DMB) granules, was used for investigating the optimum conditions of Pb(II), Cu(II), and Ni(II) biosorption from aqueous solutions. Various physicochemical parameters, such as initial metal ion concentration, equilibrium time, pH value, agitation speed, particles diameter, and adsorbent dosage, were studied. Five mathematical models describing the biosorption equilibrium and isotherm constants were tested to find the maximum uptake capacities: Langmuir, Freundlich, Redlich-Peterson, Sips, and Khan models. The best fit to the Pb(II) and Ni(II) biosorption results was obtained by Langmuir model with maximum uptake capacities of 44.67 and 29.17 mg/g for these two ions, respectively, whereas for Cu(II), the corresponding value was 31.65 mg/g obtained with Khan model. The kinetic study demonstrated that the optimum agitation speed was 400 rpm, at which the best removal efficiency and/or minimum surface mass transfer resistance (MSMTR) was achieved. A pseudo-second-order rate kinetic model gave the best fit to the experimental data (R2 = 0.99), resulting in MSMTR values of 4.69× 10?5, 4.45× 10?6, and 1.12× 10?6 m/s for Pb(II), Cu(II), and Ni(II), respectively. The thermodynamic study showed that the biosorption process was spontaneous and exothermic in nature.  相似文献   

18.
活体微藻吸附水体中Cd2+的性能特征   总被引:2,自引:0,他引:2  
【目的】藻类对重金属吸附和吸收是重金属进入食物链的重要渠道之一。研究活体微藻对水体中Cd~(2+)的吸附性能和吸附机理,旨在为Cd~(2+)等重金属离子进入水体后的去向及去除提供理论依据。【方法】选取地表水普遍存在的4种微藻:钝顶螺旋藻(Spirulina platensis)、铜绿微囊藻(Microcystis aeruginosa)、四尾栅藻(Scenedesmus quadricauda)和小球衣藻(Chlamydomonas microsphaera)作为试验材料,通过室内模拟实验,利用Langmuir、Freundlich和Dubinin-Radushkevich(D-R)3种等温吸附模型,研究4种活体微藻对Cd~(2+)的吸附规律及吸附参数。【结果】4种微藻对水体Cd~(2+)吸附均可以用Langmuir、Freundlich和D-R模型描述,其中用Langmuir模型拟合钝顶螺旋藻、Freundlich模型拟合小球衣藻、D-R模型拟合铜绿微囊藻和四尾栅藻的吸附效果最佳。四尾栅藻对Cd~(2+)的吸附量最高,而钝顶螺旋藻对Cd~(2+)的吸附量最低,但与Cd~(2+)的亲和力最强,4种微藻吸附Cd~(2+)主要是以离子代换为主的化学吸附。【结论】微藻对Cd~(2+)均有较强的吸附能力,会引起以微藻为食的水生动物Cd~(2+)富集;微藻也是去除水体Cd~(2+)的潜在吸附剂原料。  相似文献   

19.
Biosorption of chromium(VI) on to cone biomass of Pinus sylvestris was studied with variation in the parameters of pH, initial metal ion concentration and agitation speed. The biosorption of Cr(VI) was increased when pH of the solution was decreased from 7.0 to 1.0. The maximum chromium biosorption occurred at 150 rpm agitation. An increase in chromium/biomass ratio caused a decrease in the biosorption efficiency. The adsorption constants were found from the Freundlich isotherm at 25 degrees C. The cone biomass, which is a readily available biosorbent, was found suitable for removing chromium from aqueous solution.  相似文献   

20.
The removal of Cu(II) from aqueous solutions by Ulothrix zonata   总被引:3,自引:0,他引:3  
In this work, adsorption of copper(II) ions on alga has been studied by using batch adsorption techniques. The equilibrium biosorption level was determined as a function of contact time at several initial metal ion concentrations. The effect of adsorbent concentration on the amount adsorbed was also investigated. The experimental adsorption data were fitted to the Langmuir adsorption model. The free energy change (deltaG0) for the adsorption process was found to be -12.60 kJ/mol. The results indicated that the biomass of Ulothrix zonata is a suitable biosorbent for both the removal and recovery of heavy metals from wastewater.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号