Engineering of cellobiose phosphorylase for glycoside synthesis

Disaccharide phosphorylases are increasingly applied for glycoside synthesis, since they are very regiospecific and use cheap and easy to obtain donor substrates. A promising enzyme is cellobiose phosphorylase (CP), which was discovered more than 50 years ago. Many other bacterial CP enzymes have since then been characterized, cloned and applied for glycoside synthesis. However, the general application of wild-type CP for glycoside synthesis is hampered by its relatively narrow substrate specificity. Recently we have taken some successful efforts to broaden the substrate specificity of Cellulomonas uda CP by directed evolution and protein engineering. This review will give an overview of the obtained results and address the applicability of the engineered CP enzymes for glycoside synthesis. CP is the first example of an extensively engineered disaccharide phosphorylase, and may provide valuable information for protein engineering of other phosphorylase enzymes.     

Efficient chemoenzymatic oligosaccharide synthesis by reverse phosphorolysis using cellobiose phosphorylase and cellodextrin phosphorylase from Clostridium thermocellum

Inverting cellobiose phosphorylase (CtCBP) and cellodextrin phosphorylase (CtCDP) from Clostridium thermocellum ATCC27405 of glycoside hydrolase family 94 catalysed reverse phosphorolysis to produce cellobiose and cellodextrins in 57% and 48% yield from α-d-glucose 1-phosphate as donor with glucose and cellobiose as acceptor, respectively. Use of α-d-glucosyl 1-fluoride as donor increased product yields to 98% for CtCBP and 68% for CtCDP. CtCBP showed broad acceptor specificity forming β-glucosyl disaccharides with β-(1→4)- regioselectivity from five monosaccharides as well as branched β-glucosyl trisaccharides with β-(1→4)-regioselectivity from three (1→6)-linked disaccharides. CtCDP showed strict β-(1→4)-regioselectivity and catalysed linear chain extension of the three β-linked glucosyl disaccharides, cellobiose, sophorose, and laminaribiose, whereas 12 tested monosaccharides were not acceptors. Structure analysis by NMR and ESI-MS confirmed two β-glucosyl oligosaccharide product series to represent novel compounds, i.e. β-d-glucopyranosyl-[(1→4)-β-d-glucopyranosyl]_n-(1→2)-d-glucopyranose, and β-d-glucopyranosyl-[(1→4)-β-d-glucopyranosyl]_n-(1→3)-d-glucopyranose (n = 1–7). Multiple sequence alignment together with a modelled CtCBP structure, obtained using the crystal structure of Cellvibrio gilvus CBP in complex with glucose as a template, indicated differences in the subsite +1 region that elicit the distinct acceptor specificities of CtCBP and CtCDP. Thus Glu636 of CtCBP recognized the C1 hydroxyl of β-glucose at subsite +1, while in CtCDP the presence of Ala800 conferred more space, which allowed accommodation of C1 substituted disaccharide acceptors at the corresponding subsites +1 and +2. Furthermore, CtCBP has a short Glu496-Thr500 loop that permitted the C6 hydroxyl of glucose at subsite +1 to be exposed to solvent, whereas the corresponding longer loop Thr637–Lys648 in CtCDP blocks binding of C6-linked disaccharides as acceptors at subsite +1. High yields in chemoenzymatic synthesis, a novel regioselectivity, and novel oligosaccharides including products of CtCDP catalysed oligosaccharide oligomerisation using α-d-glucosyl 1-fluoride, all together contribute to the formation of an excellent basis for rational engineering of CBP and CDP to produce desired oligosaccharides.     

纤维二糖磷酸化酶和纤维寡糖磷酸化酶的研究与应用

自然界中一些厌氧的纤维素降解菌能够产生纤维二糖磷酸化酶(Cellobiose Phosphorylase,CBP)和纤维寡糖磷酸化酶(Cellodextrin Phosphorylase,CDP)磷酸化裂解纤维二糖和纤维寡糖.CBP和CDP属于糖苷水解酶94家族(Glycoside Hydrolase Family 9...     

Purification and properties of Cellvibrio gilvus cellobiose phosphorylase

The cellobiose phosphorylase (EC 2.4.1.20) of Cellvibrio gilvus, which is an endocellular enzyme, has been purified 196-fold with a recovery of 11% and a specific activity of 27.4 mumol of glucose 1-phosphate formed/min per mg of protein. The purification procedure includes fractionation with protamine sulphate, and hydroxyapatite and DEAE-Sephadex A-50 chromatography. The enzyme appears homogeneous on polyacrylamide-gel electrophoresis, and a molecular weight of 280 000 was determined by molecular-sieve chromatography. Sodium dodecyl sulphate/polyacrylamide-gel electrophoresis revealed a single band and mol.wt. 72 000, indicating that cellobiose phosphorylase consists of four subunits. The enzyme had a specificity for cellobiose, requiring Pi and Mg2+ for phosphorylation, but not for cellodextrin, gentibiose, laminaribiose, lactose, maltose, kojibiose and sucrose. The enzyme showed low thermostability, an optimum pH of 7.6 and a high stability in the presence of 2-mercaptoethanol or dithiothreitol. The Km values for cellobiose and Pi were 1.25 mM and 0.77 mM respectively. Nojirimycin acted as a powerful pure competitive inhibitor (with respect to cellobiose) of the enzyme (Ki = 45 microM). Addition of thiol-blocking agents to the enzyme caused 56% inhibition at 500 microM-N-ethylmaleimide and 100% at 20 microM-p-chloromercuribenzoate.     

Synthetic reaction of Cellvibrio gilvus cellobiose phosphorylase.

The synthetic reactions of the cellobiose phosphorylase from Cellvibrio gilvus were investigated in detail. It was found that, besides D-glucose, some sugars having substitution or deletion of the hydroxyl group at C2 or C6 of the D-glucose molecule could serve as a glucosyl acceptor, though less effectively than D-glucose. The enzyme showed higher activity with beta-D-glucose than with the alpha-anomer as an acceptor. This result indicates that it recognizes the anomeric hydroxyl group not involved directly in the reaction. beta-D-Cellobiose was also phosphorolyzed faster than the alpha-anomer. Substrate inhibition was observed with D-glucose, 6-deoxy-D-glucose, or D-glucosamine as an acceptor, with D-glucose being most inhibiting. This inhibition was studied in detail and it was found that D-glucose competes with alpha-D-glucose-1-phosphate for its binding site. A model of competitive substrate inhibition was proposed, and the experimental data fit well to the theoretical values that were calculated in accordance with this model.     

Structural dissection of the reaction mechanism of cellobiose phosphorylase

Cellobiose phosphorylase, a member of the glycoside hydrolase family 94, catalyses the reversible phosphorolysis of cellobiose into alpha-D-glucose 1-phosphate and D-glucose with inversion of the anomeric configuration. The substrate specificity and reaction mechanism of cellobiose phosphorylase from Cellvibrio gilvus have been investigated in detail. We have determined the crystal structure of the glucose-sulphate and glucose-phosphate complexes of this enzyme at a maximal resolution of 2.0 A (1 A=0.1 nm). The phosphate ion is strongly held through several hydrogen bonds, and the configuration appears to be suitable for direct nucleophilic attack to an anomeric centre. Structural features around the sugar-donor and sugar-acceptor sites were consistent with the results of extensive kinetic studies. When we compared this structure with that of homologous chitobiose phosphorylase, we identified key residues for substrate discrimination between glucose and N-acetylglucosamine in both the sugar-donor and sugar-acceptor sites. We found that the active site pocket of cellobiose phosphorylase was covered by an additional loop, indicating that some conformational change is required upon substrate binding. Information on the three-dimensional structure of cellobiose phosphorylase will facilitate engineering of this enzyme, the application of which to practical oligosaccharide synthesis has already been established.     

Purification and properties of cellobiose phosphorylase from Clostridium thermocellum

Cellobiose phosphorylase was purified 111-fold from a cell extract of Clostridium thermocellum ATCC 27405, with a yield of 31.4%, to electrophoretic and column chromatographic homogenity. The molecular weight of the enzyme was estimated to be 150,000 by gel filtration and 85,000 by SDS-PAGE, suggesting that it consisted of two identical subunits. It was suggested by spectrophotometric and chemical analyse that the enzyme contained no pyridoxal phosphate. The enzyme was inactivated by N-ethylmaleimide and activated by dithiothreitol, indicating that the exposed thiol group(s) was important for the enzymatic activity. The enzyme could utilize, so far as examined, d-glucose, d-xylose, 2-deoxy-d-glucose, and d-mannose, as acceptors of glucose in the synthetic reaction of disaccharides. The enzyme could to a low degree utilize d-arabinose and d-fucose, as acceptors.     

Engineering a large protein by combined rational and random approaches: stabilizing the Clostridium thermocellum cellobiose phosphorylase

The Clostridium thermocellum cellobiose phosphorylase (CtCBP) is a large protein consisting of 812 amino acids and has great potential in the production of sugar phosphates, novel glycosides, and biofuels. It is relatively stable at 50 °C, but is rapidly inactivated at 70 °C. To stabilize CtCBP at elevated temperatures, two protein-engineering approaches were applied, i.e. site-directed mutagenesis based on structure-guided homology analysis and random mutagenesis at various mutation rates. The former chose substitutions by comparison of the protein sequences of CBP homologs, utilized structural information to identify key amino acid residues responsible for enhanced stability, and then created a few variants accurately. The latter constructed large libraries of random mutants at different mutagenesis frequencies. A novel combinational selection/screening strategy was employed to quickly isolate thermostability-enhanced and active variants. Several stability-enhanced mutants were obtained by both methods. Manually combining the stabilizing mutations identified from both rational and random approaches led to the best mutant (CM3) with the halftime of inactivation at 70 °C extended from 8.3 to 24.6 min. The temperature optimum of CM3 was increased from 60 to 80 °C. These results suggested that a combination of rational design and random mutagenesis could have a solid basis for engineering large proteins.     

Energetic benefits and rapid cellobiose fermentation by Saccharomyces cerevisiae expressing cellobiose phosphorylase and mutant cellodextrin transporters

Anaerobic bacteria assimilate cellodextrins from plant biomass by using a phosphorolytic pathway to generate glucose intermediates for growth. The yeast Saccharomyces cerevisiae can also be engineered to ferment cellobiose to ethanol using a cellodextrin transporter and a phosphorolytic pathway. However, strains with an intracellular cellobiose phosphorylase initially fermented cellobiose slowly relative to a strain employing an intracellular β-glucosidase. Fermentations by the phosphorolytic strains were greatly improved by using cellodextrin transporters with elevated rates of cellobiose transport. Furthermore under stress conditions, these phosphorolytic strains had higher biomass and ethanol yields compared to hydrolytic strains. These observations suggest that, although cellobiose phosphorolysis has energetic advantages, phosphorolytic strains are limited by the thermodynamics of cellobiose phosphorolysis (ΔG°=+3.6 kJ mol⁻¹). A thermodynamic “push” from the reaction immediately upstream (transport) is therefore likely to be necessary to achieve high fermentation rates and energetic benefits of phosphorolysis pathways in engineered S. cerevisiae.     

Oxidoreductive cellulose depolymerization by the enzymes cellobiose dehydrogenase and glycoside hydrolase 61

Several members of the glycoside hydrolase 61 (GH61) family of proteins have recently been shown to dramatically increase the breakdown of lignocellulosic biomass by microbial hydrolytic cellulases. However, purified GH61 proteins have neither demonstrable direct hydrolase activity on various polysaccharide or lignacious components of biomass nor an apparent hydrolase active site. Cellobiose dehydrogenase (CDH) is a secreted flavocytochrome produced by many cellulose-degrading fungi with no well-understood biological function. Here we demonstrate that the binary combination of Thermoascus aurantiacus GH61A (TaGH61A) and Humicola insolens CDH (HiCDH) cleaves cellulose into soluble, oxidized oligosaccharides. TaGH61A-HiCDH activity on cellulose is shown to be nonredundant with the activities of canonical endocellulase and exocellulase enzymes in microcrystalline cellulose cleavage, and while the combination of TaGH61A and HiCDH cleaves highly crystalline bacterial cellulose, it does not cleave soluble cellodextrins. GH61 and CDH proteins are coexpressed and secreted by the thermophilic ascomycete Thielavia terrestris in response to environmental cellulose, and the combined activities of T. terrestris GH61 and T. terrestris CDH are shown to synergize with T. terrestris cellulose hydrolases in the breakdown of cellulose. The action of GH61 and CDH on cellulose may constitute an important, but overlooked, biological oxidoreductive system that functions in microbial lignocellulose degradation and has applications in industrial biomass utilization.     

Product solubility control in cellooligosaccharide production by coupled cellobiose and cellodextrin phosphorylase

Soluble cellodextrins (linear β-1,4-d -gluco-oligosaccharides) have interesting applications as ingredients for human and animal nutrition. Their bottom-up synthesis from glucose is promising for bulk production, but to ensure a completely water-soluble product via degree of polymerization (DP) control (DP ≤ 6) is challenging. Here, we show biocatalytic production of cellodextrins with DP centered at 3 to 6 (~96 wt.% of total product) using coupled cellobiose and cellodextrin phosphorylase. The cascade reaction, wherein glucose was elongated sequentially from α-d -glucose 1-phosphate (αGlc1-P), required optimization and control at two main points. First, kinetic and thermodynamic restrictions upon αGlc1-P utilization (200 mM; 45°C, pH 7.0) were effectively overcome (53% → ≥90% conversion after 10 hrs of reaction) by in situ removal of the phosphate released via precipitation with Mg²⁺. Second, the product DP was controlled by the molar ratio of glucose/αGlc1-P (∼0.25; 50 mM glucose) used in the reaction. In optimized conversion, soluble cellodextrins in a total product concentration of 36 g/L were obtained through efficient utilization of the substrates used (glucose: 98%; αGlc1-P: ∼80%) after 1 hr of reaction. We also showed that, by keeping the glucose concentration low (i.e., 1–10 mM; 200 mM αGlc1-P), the reaction was shifted completely towards insoluble product formation (DP ∼9–10). In summary, this study provides the basis for an efficient and product DP-controlled biocatalytic synthesis of cellodextrins from expedient substrates.     

Construction of cellobiose phosphorylase variants with broadened acceptor specificity towards anomerically substituted glucosides

The general application of glycoside phosphorylases such as cellobiose phosphorylase (CP) for glycoside synthesis is hindered by their relatively narrow substrate specificity. We have previously reported on the creation of Cellulomonas uda CP enzyme variants with either modified donor or acceptor specificity. Remarkably, in this study it was found that the donor mutant also displays broadened acceptor specificity towards several β‐glucosides. Triple mutants containing donor (T508I/N667A) as well as acceptor mutations (E649C or E649G) also display a broader acceptor specificity than any of the parent enzymes. Moreover, further broadening of the acceptor specificity has been achieved by site‐saturation mutagenesis of residues near the active site entrance. The best enzyme variant contains the additional N156D and N163D mutations and is active towards various alkyl β‐glucosides, methyl α‐glucoside and cellobiose. In comparison with the wild‐type C. uda CP enzyme, which cannot accept anomerically substituted glucosides at all, the obtained increase in substrate specificity is significant. The described CP enzyme variants should be useful for the synthesis of cellobiosides and other glycosides with prebiotic and pharmaceutical properties. Biotechnol. Bioeng. 2010;107: 413–420. © 2010 Wiley Periodicals, Inc.     

Engineering Escherichia coli cells for cellobiose assimilation through a phosphorolytic mechanism

We report here the first engineering effort for Escherichia coli biocatalysts to assimilate cellobiose through a phosphorolytic mechanism. Cytoplasmic expression of the Saccharophagus cellobiose phosphorylase was shown to enable E. coli to use cellobiose. Subsequent knockout and complementation studies provided solid evidence that the endogenous LacY was responsible for the transport of cellobiose.     

Characterization of a cellobiose phosphorylase from a hyperthermophilic eubacterium,Thermotoga maritima MSB8

The cepA putative gene encoding a cellobiose phosphorylase of Thermotoga maritima MSB8 was cloned, expressed in Escherichia coli BL21-codonplus-RIL and characterized in detail. The maximal enzyme activity was observed at pH 6.2 and 80 degrees C. The energy of activation was 74 kJ/mol. The enzyme was stable for 30 min at 70 degrees C in the pH range of 6-8. The enzyme phosphorolyzed cellobiose in an random-ordered bi bi mechanism with the random binding of cellobiose and phosphate followed by the ordered release of D-glucose and alpha-D-glucose-1-phosphate. The Km for cellobiose and phosphate were 0.29 and 0.15 mM respectively, and the kcat was 5.4 s(-1). In the synthetic reaction, D-glucose, D-mannose, 2-deoxy-D-glucose, D-glucosamine, D-xylose, and 6-deoxy-D-glucose were found to act as glucosyl acceptors. Methyl-beta-D-glucoside also acted as a substrate for the enzyme and is reported here for the first time as a substrate for cellobiose phosphorylases. D-Xylose had the highest (40 s(-1)) kcat followed by 6-deoxy-D-glucose (17 s(-1)) and 2-deoxy-D-glucose (16 s(-1)). The natural substrate, D-glucose with the kcat of 8.0 s(-1) had the highest (1.1 x 10(4) M(-1) s(-1)) kcat/Km compared with other glucosyl acceptors. D-Glucose, a substrate of cellobiose phosphorylase, acted as a competitive inhibitor of the other substrate, alpha-D-glucose-1-phosphate, at higher concentrations.     

Computational analyses of the conformational itinerary along the reaction pathway of GH94 cellobiose phosphorylase

GH94 cellobiose phosphorylase (CBP) catalyzes the phosphorolysis of cellobiose into α-d-glucose 1-phosphate (G1P) and d-glucose with inversion of anomeric configuration. The complex crystal structure of CBP from Cellvibrio gilvus had previously been determined; glycerol, glucose, and phosphate are bound to subsites −1, +1, and the anion binding site, respectively. We performed computational analyses to elucidate the conformational itinerary along the reaction pathway of this enzyme. autodock was used to dock cellobiose with its glycon glucosyl residue in various conformations and with its aglycon glucosyl residue in the low-energy ⁴C₁ conformer. An oxocarbenium ion-like glucose molecule mimicking the transition state was also docked. Based on the clustering analysis, docked energies, and comparison with the crystallographic ligands, we conclude that the reaction proceeds from ¹S₃ as the pre-transition state conformer (Michaelis complex) via E₃ as the transition state candidate to ⁴C₁ as the G1P product conformer. The predicted reaction pathway of the inverting phosphorylase is similar to that proposed for the first-half glycosylation reaction of retaining cellulases, but is different from those for inverting cellulases. NAMD was used to simulate molecular dynamics of the enzyme. The ¹S₃ pre-transition state conformer is highly stable compared with other conformers, and a conformational change from ⁴C₁ to ^1,4B was observed.