Electric field control of lipase membrane activity

Lipase (EC 3.1.1.3., from Pseudomonas sp.) was entrapped in collagen membrane containing liquid crystal (4-methoxybenzilidene-4′-n-butylaniline). The activity of the lipase–liquid crystal membrane at an applied voltage of 4 V was 3.4 compared to a membrane tested without imposition of an external electric field. A linear relationship was observed between the activity of the lipase–liquid crystal membrane and the current. The apparent Michaelis constant (K′_m) of the lipase–liquid crystal membrane under electric field was identical to that of the membrane under ordinary condition. Activation of the lipase–liquid crystal membrane was observed repeatedly, i.e., activation in the presence of an electric field and reversion to a basal level upon removal of the field occurred cyclically. Activity control of immobilized enzymes is desirable for switching devices of a bioreactor. Possible mechanisms of the lipase activation by electric field are discussed.     

Systematic Synthesis of Sulfur-containing p-Nitrophenyl α-Maltopentaoside Derivatives for a Differential Assay of Human α-Amylases

For use in a differential assay of human α-amylases, a variety of 6⁵-S-substituted p-nitrophenyl α-maltopentaoside derivatives (6-54) were systematically synthesized via the key intermediate, p-nitrophenyl O-(2,3-di-O-acetyl-6-S-acetyl-4-O-benzoyl-6-thio-α-D-glucopyranosyl)-(1 →4)-tris[O-(2,3,6-tri-O-acetyl-α-D-glucopyranosyl)-(1→4)]-2,3,6-tri-O-acetyl-α-D-glucopyranoside (4), which was easily prepared from p-nitrophenyl α-maltopentaoside (G5P) in four steps. The sulfoxide and sulfone derivatives were prepared by oxidizing the corresponding sulfides with m-chloroperbenzoic acid.     

Synthesis,spectral properties and antimicrobial activity of a new cationic water‐soluble pH‐dependent poly(propylene imine) dendrimer modified with 1,8‐naphthalimides

A three‐step synthesis was implemented to prepare a quaternary ammonium functionalized blue fluorescent poly(propylene imine) dendrimer modified with pyridinium salt of 4‐acylamino‐1,8‐naphthalimide. The new cationic dendrimer absorbs in the ultraviolet light region and emits blue fluorescence. Its spectral characteristics in organic solvents and in an aqueous solution were studied. The influence of pH on the fluorescence intensity of the dendrimer was established with regard to its use as a pH sensor. The effect of hydroxyl ions on the absorption and fluorescence spectra in dry N,N‐dimethylformamide was also investigated. The antimicrobial activity of the dendrimer was assessed against model pathogenic microorganisms in agar, liquid medium, and after its deposition on cotton fabric.     

Studies on Phenolic Lactones

α-Exo-unsaturated-γ-butyrolactones were prepared. Reduction of α-benzylidene succinic acid esters with lithium aluminum hydride afford 2-benzylidene-1,4-butanediols. Manganese dioxide oxidation of glycols followed by silver oxide oxidation and lactonization afford α-benzylidene-γ-butyrolactones. Thus α-benzylidene-, α-anisylidene-, α-veratrylidene-, α-(3,4,5-trimethoxybenzylidene)-β-(3,4,5-trimethoxybenzyl)-γ-butyrolactone were synthesized.     

Aerobic and Anaerobic Catabolism of Vanillic Acid and Some Other Methoxy-Aromatic Compounds by Pseudomonas sp. Strain PN-1

Vanillic acid (4-hydroxy-3-methoxybenzoic acid) supported the anaerobic (nitrate respiration) but not the aerobic growth of Pseudomonas sp. strain PN-1. Cells grown anaerobically on vanillate oxidized vanillate, p-hydroxybenzoate, and protocatechuic acid (3,4-dihydroxybenzoic acid) with O₂ or nitrate. Veratric acid (3,4-dimethoxybenzoic acid) but not isovanillic acid (3-hydroxy-4-methoxybenzoic acid) induced cells for the oxic and anoxic utilization of vanillate, and protocatechuate was detected as an intermediate of vanillate breakdown under either condition. Aerobic catabolism of protocatechuate proceeded via 4,5-meta cleavage, whereas anaerobically it was probably dehydroxylated to benzoic acid. Formaldehyde was identified as a product of aerobic demethylation, indicating a monooxygenase mechanism, but was not detected during anaerobic demethylation. The aerobic and anaerobic systems had similar but not identical substrate specificities. Both utilized m-anisic acid (3-methoxybenzoic acid) and veratrate but not o- or p-anisate and isovanillate. Syringic acid (4-hydroxy-3,5-dimethoxybenzoic acid), 3-O-methylgallic acid (3-methoxy-4,5-dihydroxybenzoic acid), and 3,5-dimethoxybenzoic acid were attacked under either condition, and formaldehyde was liberated from these substrates in the presence of O₂. The anaerobic demethylating system but not the aerobic enzyme was also active upon guaiacol (2-methoxyphenol), ferulic acid (3-[4-hydroxy-3-methoxyphenyl]-2-propenoic acid), 3,4,5-trimethoxycinnamic acid (3-[3,4,5-trimethoxyphenyl]-2-propenoic acid), and 3,4,5-trimethoxybenzoic acid. The broad specificity of the anaerobic demethylation system suggests that it probably is significant in the degradation of lignoaromatic molecules in anaerobic environments.     

Chitosan-mediated changes in cell wall composition, morphology and ultrastructure in two wood-inhabiting fungi

The effect of chitosan on cell wall deposition was investigated in the two wood-inhabiting fungal species Trichoderma harzianum (CBS 597.91) and Sphaeropsis sapinea (NZFS 2725). The study used three independent analytical techniques to quantify chitin in the fungal mycelium. A colorimetric method for the detection of d-glucosamine was compared with two gas chromatography–mass spectroscopy (GC-MS) methods employing alditol acetates analysis and pyrolysis. The latter used a stable-isotope-labelled internal standard, d₃-N-acetyl glucosamine. At least in the case of S. sapinea, the study provided evidence of an increase in the chitin content in the mycelium due to chitosan treatment, indicating that chitosan treatment affected cell wall deposition. Electron microscopy techniques showed alteration in surface morphology and cell wall texture due to chitosan treatment. The implications of these results are discussed with a view to analysing possible mechanisms for growth inhibitory effects of chitosan on fungal hyphae.     

Methylated N-aryl chitosan derivative/DNA complex nanoparticles for gene delivery: Synthesis and structure–activity relationships

In this study, three kinds of methylated chitosan containing different aromatic moieties were synthesized by two steps, reductive amination and methylation, respectively. The chemical structures of all methylated derivatives, methylated N-(4-N,N-dimethylaminocinnamyl) chitosan chloride (MDMCMChC), methylated N-(4-N,N-dimethylaminobenzyl) chitosan chloride (MDMBzChC), and methylated N-(4-pyridinylmethyl) chitosan chloride (MPyMeChC) were characterized by ATR–FTIR and ¹H NMR spectroscopy. The complexes between the chitosan derivatives and plasmid DNA at different N/P ratios were characterized by gel electrophoresis, dynamic light scattering, and atomic force microscopic techniques. The smallest particle sizes of these complexes were obtained at N/P ratio of 5 and ranged from 95 to 124 nm while the zeta-potentials were in the range of 18–27 mV. Transfection efficiencies of these complexes were investigated by expression of the plasmid DNA encoding green fluorescence protein (pEGFP-C2) on human hepatoma cells (Huh 7 cells) compared to N,N,N-trimethyl chitosan chloride (TMChC). The rank of transfection efficiency was MPyMeChC > MDMBzChC > TMChC > MDMCMChC, respectively. The cytotoxicity of these complexes was also studied by MTT assay where the MPyMeChC complex exhibited less toxicity than other derivatives even at high N/P ratios. Therefore, MPyMeChC demonstrated potential as its safe and efficient gene carrier.     

Polyamine structural effects on the induction and stabilization of liquid crystalline DNA: potential applications to DNA packaging,gene therapy and polyamine therapeutics

DNA undergoes condensation, conformational transitions, aggregation and resolubilization in the presence of polyamines, positively charged organic molecules present in all cells. Under carefully controlled environmental conditions, DNA can also transform to a liquid crystalline state in vitro. We undertook the present work to examine the ability of spermidine, N⁴-methylspermidine, spermine, N¹-acetylspermine and a group of tetramine, pentamine and hexamine analogs of spermine to induce and stabilize liquid crystalline DNA. Liquid crystalline textures were identified under a polarizing microscope. In the absence of polyamines, calf thymus DNA assumed a diffused, planar cholesteric phase with entrapped bubbles when incubated on a glass slide at 37°C. In the presence of spermidine and spermine, the characteristic fingerprint textures of the cholesteric phase, adopting a hexagonal order, were obtained. The helical pitch was 2.5 µm. The final structures were dendrimeric and crystalline when DNA was treated with spermine homologs and bis(ethyl) derivatives. A cholesteric structure was observed when DNA was treated with a hexamine at 37°C. This structure changed to a hexagonal dendrimer with fluidity on prolonged incubation. These data show a structural specificity effect of polyamines on liquid crystalline phase transitions of DNA and suggest a possible physiological function of natural polyamines.     

Polymer coated liposomes for use in the oral cavity – a study of the in vitro toxicity,effect on cell permeability and interaction with mucin

In this study we investigated the in vitro toxicity, impact on cell permeability and mucoadhesive potential of polymer-coated liposomes intended for use in the oral cavity. A TR146 cell line was used as a model. The overall aim was to end up with a selection of safe polymer coated liposomes with promising mucoadhesive properties for drug delivery to the oral cavity. The following polymers were tested: chitosan, low-methoxylated pectin (LM-pectin), high-methoxylated pectin (HM-pectin), amidated pectin (AM-pectin), Eudragit, poly(N-isopropylacrylamide-co-methacrylic acid) (p(NIPAAM-co-MAA)), hydrophobically modified hydroxyethyl cellulose (HM-HEC), and hydrophobically modified ethyl hydroxyethyl cellulose (HM-EHEC). With chitosan as an exception, all the systems exhibited no significant effect on cell viability and permeability at the considered concentrations. Additionally, all the formulations showed to a varying degree an interaction with mucin (BSM type I-S); the positively charged formulations exhibited the strongest interaction, while the negatively and neutrally charged formulations displayed a moderate or low interaction. The ability to interact with mucin makes all the liposomal formulations promising for oromucosal administration. Although the chitosan-coated liposomes affected the cell viability, this formulation also influenced the cell permeability, which makes it an interesting candidate for systemic drug delivery from the oral cavity.     

Syntheses of 14C-Labeled Pyrethrin I,Allethrin, Phthalthrin,and Dimethrin on a Submillimole Scale

Studies on the metabolic fate and degradation chemistry of pyrethroid insecticide chemicals are greatly facilitated by the use of compounds radiolabeled, in separate preparations, in the acid and alcohol moieties. Acid-labeled preparations were made by converting d-trans-chrysanthemic acid-1-¹⁴C (88 mg, 1.3 mCi/mm) into d-trans-d-pyrethrin-1-¹⁴C (68 mg, 1.3 mCi/mm), d-trans-d-allethrin-¹⁴C (43 mg, 1.3 mCi/mm), d-trans-dimethrin-¹⁴C (54 mg, 0.294 mCi/mm), and d-trans-phthalthrin-¹⁴C (47 mg, 0.294 mCi/mm), incorporating approximately 81% of the starting radiocarbon into the four pyrethroid preparations. Alcohol-labeled preparations were made by converting acetone-1,3-¹⁴C into d-trans-dl-ailethrin-¹⁴C (146 mg, 0.162 mCi/mm) and formaldehyde-¹⁴C into d-trans-phthalthrin-¹⁴C (299 mg, 0.276 mCi/mm). Each labeled compound had a high stereochemical purity and a radiochemical purity of greater than 99%. Detailed procedures were worked out for all conversions which took place in high yields except in one case: the synthesis of allethrin labeled in the alcohol moiety.     

Preparation and mass-spectral analysis of O-hydroxy-ethyl derivatives of -glucose

Various hydroxyethyl ethers of -glucose have been prepared in good yield by treating -glucose derivatives with 2-bromoethyl tetrahydropyranyl ether in the presence of sodium hydride. The derived O-(hydroxyethyl)- -glucitol acetates exhibited characteristic mass-spectral fragments. The furanose and pyranose forms of 1,2-O-ethylene- -glucose derived from 2-O-(2-hydroxyethyl)- -glucose were identified by mass-spectral analysis.     

Inhibition of P-glycoprotein-mediated Multidrug Resistance (MDR) by N,N-bis(cyclohexanol)amine aryl esters: further restriction of molecular flexibility maintains high potency and efficacy

Conformational modulation of the aryl portion of a set of N,N-bis(cyclohexanol)amine aryl esters (1a-d) that are potent Pgp-dependent MDR inhibitors has been performed. Toward this end the trans-3-(3,4,5-trimethoxyphenyl)acrylic acid present in set 1 was substituted with 3-(3,4,5-trimethoxyphenyl)propanoic and 3-(3,4,5-trimethoxyphenyl)propiolic moieties to give sets 2 and 3, respectively. While the introduction of 3-(3,4,5-trimethoxyphenyl)propanoic moiety resulted in a definite drop in potency and efficacy, esterification with 3-(3,4,5-trimethoxyphenyl)propiolic acid gave four isomers (3a-d) that maintain high potency and possess optimal efficacy. These results are discussed in terms of conformational flexibility of the different sets of compounds.     

Identification of a radical formed in the reaction mixture of rat brain homogenate with a ferrous ion/ascorbic acid system using HPLC–EPR and HPLC–EPR–MS

Identification of a free radical is performed for the reaction mixture of rat brain homogenate with a ferrous ion/ascorbic acid system using EPR, high performance liquid chromatography–electron paramagnetic resonance spectrometry (HPLC–EPR) and high performance liquid chromatography–electron paramagnetic resonance–mass spectrometry (HPLC–EPR–MS). EPR measurements of the reaction mixtures showed prominent signals with hyperfine coupling constants (α^N = 1.58 mT and α^Hβ = 0.26 mT). No EPR spectrum was detectable without rat brain homogenate, suggesting that the radical is derived from rat brain homogenate. An HPLC–EPR analysis of the reaction mixture showed a peak with retention time of 33.7 min. An HPLC–EPR–MS analysis of the peak gave two ions at m/z 224 and 137, suggesting that α-(4-pyridyl-1-oxide)-N-tert-butylnitrone (4-POBN)/ethyl radical adduct forms in the reaction mixture.     

Biosynthesis and metabolism of indole-3-ethanol and indole-3-acetic acid by Pinus sylvestris L. needles

Combined gas chromatography-mass spectrometry has been used to identify indole-3-ethanol (IEt) in a purified extract from needles of Pinus sylvestris L. Quantitative estimates obtained by high-performance liquid chromatography with fluorescence detection, corrected for samples losses occurring during purification, indicate that Pinus needles contain 46±4 ng g^-1 IEt. This compares with 24.5±6.5 ng g^-1 indole-3-acetic acid (IAA) and 2.3±0.4 ng g^-1 indole-3-carboxylic acid (ICA) (Sandberg et al. 1984, Phytochemistry, 23, 99–102). Metabolism studies with needles incubated in a culture medium in darkness revealed that both [3-¹⁴C]-tryptophan and [2-¹⁴C]tryptamine mine are converted to [¹⁴C]IEt. It was also shown that [3-¹⁴C]IEt acted as a precursor of [¹⁴C]IAA. The observed metabolism appears to be enzymic in nature. The [2-¹⁴C]IAA was not catabolised to [¹⁴C]ICA in detectable quantities implying that, at best, only a minor portion of the endogenous ICA pool in the Pinus needles originates from IAA.Abbreviations DEAE diethylaminoethyl - GC-MS gas chromatography-mass spectrometry - HPLC high-performance liquid chromatography - IAA indole-3-acetic acid - ICA indole-3-carboxylic acid - IEt indole-3-ethanol - PVP polyvinylpyrrolidone     

Evaluation of chlorophyll fluorescence in different densities of spring barley

Over the period 2008–2009, field experiments were carried out at the Lithuanian Institute of Agriculture on an Endocalcari-Epihypogleyic Cambisol (CMg-p-w-can). The study was aimed to establish the effects of spring barley crop stand density on the chlorophyll fluorescence and to estimate the relationship between grain yield and chlorophyll fluorescence value. The tests involved three spring barley varieties—Aura DS, Barke and Gustav. The three different stand densities were formed with seed rates of two, four and six million viable seeds per hectare. Our research findings indicated that increasing spring barley stand density did not exert any negative influence on major photosynthetic processes and did not result in any significant qualitative changes in light harvesting system. A significant varietal (factor B) influence was established on minimum fluorescence (F _o) and maximum fluorescence (F _m) values after short dark adaptation indicators (F _fact. = 19.66** and F _fact. = 9.33**, respectively). Growth stage (factor C) significantly influenced all fluorescence indicators—Fo, Fm and quantum efficiency of PSII after short dark adaptation (F _v/F _m)—in the five cases of the six tested. A significant effect of variety and growth stage interaction (B × C) was determined for 66.7% of the tested cases. The article presents a correlation between the grain yield of spring barley and fluorescence parameters. In most cases, the correlation was strong and significant. The interaction between the fluorescence parameters for individual varieties was responsible for 53.8–76.2% of grain yield data variation, which averaged over all varieties, amounted to 21.9–46.1%.     

Hydrolysis of polyethyleneterephthalate by p‐nitrobenzylesterase from Bacillus subtilis

From a screening on agar plates with bis(benzoyloxyethyl) terephthalate (3PET), a Bacillus subtilis p‐nitrobenzylesterase (BsEstB) was isolated and demonstrated to hydrolyze polyethyleneterephthalate (PET). PET‐hydrolase active strains produced clearing zones and led to the release of the 3PET hydrolysis products terephthalic acid (TA), benzoic acid (BA), 2‐hydroxyethyl benzoate (HEB), and mono‐(2‐hydroxyethyl) terephthalate (MHET) in 3PET supplemented liquid cultures. The 3PET‐hydrolase was isolated from non‐denaturating polyacrylamide gels using fluorescein diacetate (FDA) and identified as BsEstB by LC‐MS/MS analysis. BsEstB was expressed in Escherichia coli with C‐terminally fused StrepTag II for purification. The tagged enzyme had a molecular mass of 55.2 kDa and a specific activity of 77 U/mg on p‐nitrophenyl acetate and 108 U/mg on p‐nitrophenyl butyrate. BsEstB was most active at 40°C and pH 7.0 and stable for several days at pH 7.0 and 37°C while the half‐life times decreased to 3 days at 40°C and only 6 h at 45°C. From 3PET, BsEstB released TA, MHET, and BA, but neither bis(2‐hydroxyethyl) terephthalate (BHET) nor hydroxyethylbenzoate (HEB). The k_cat values decreased with increasing complexity of the substrate from 6 and 8 (s?1) for p‐nitrophenyl‐acetate (4NPA) and p‐nitrophenyl‐butyrate (4NPB), respectively, to 0.14 (s?1) for bis(2‐hydroxyethyl) terephthalate (BHET). The enzyme hydrolyzed PET films releasing TA and MHET with a concomitant decrease of the water‐contact angle (WCA) from 68.2° ± 1.7° to 62.6° ± 1.1° due to formation of novel hydroxyl and carboxyl groups. These data correlated with a fluorescence emission intensity increase seen for the enzyme treated sample after derivatization with 2‐(bromomethyl)naphthalene. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Liquid crystal formation in supercoiled DNA solutions

The critical concentrations pertaining to the liquid crystal formation of pUC18 plasmid in saline solutions were obtained from (31)P nuclear magnetic resonance, polarized light microscopy, and phase equilibrium experiments. The transition is strongly first order with a broad gap between the isotropic and anisotropic phase. The critical boundaries are strongly and reversibly dependent on temperature and weakly dependent on ionic strength. With polarized light microscopy on magnetically oriented samples, the liquid crystalline phase is assigned cholesteric with a pitch on the order of 4 microm. Preliminary results show that at higher concentrations a true crystal is formed. The isotropic-cholesteric transition is interpreted with lyotropic liquid crystal theory including the effects of charge, orientation entropy, and excluded volume effects. It was found that the molecular free energy associated with the topology of the superhelix is of paramount importance in controlling the width of the phase gap. The theoretical results compare favorably with the critical boundary pertaining to the disappearance of the isotropic phase, but they fail to predict the low concentration at which the anisotropic phase first appears.     

Purification and characterization of a sialidase fromClostridium chauvoei NC08596

The sialidase secreted byClostridium chauvoei NC08596 was purified to apparent homogeneity by ion-exchange chromatography, gel filtration, hydrophobic interaction-chromatography, FPLC ion-exchange chromatography, and FPLC gel filtration. The enzyme was enriched about 10 200-fold, reaching a final specific activity of 24.4 U mg^–1. It has a relatively high molecular mass of 300 kDa and consists of two subunits each of 150 kDa. The cations Mn²⁺, Mg²⁺, and Ca²⁺ and bovine serum albumin have a positive effect on the sialidase activity, while Hg²⁺, Cu²⁺, and Zn²⁺, chelating agents and salt decrease enzyme activity. The substrate specificity, kinetic data, and pH optimum of the enzyme are similar to those of other bacterial sialidases.Abbreviations FPLC fast protein liquid chromatography - NCTC National Collection of Type Cultures - ATCC American Type Culture Collection - MU-Neu5Ac 4-methylumbelliferyl--d-N-acetylneuraminic acid - buffer A 0.02m piperazine, 0.01m CaCl₂, pH 5.5 - buffer B 0.02m piperazine, 0.01m CaCl₂, 1.0m NaCl, pH 5.5 - buffer C 0.1m sodium acetate, 0.01m CaCl₂, pH 5.5 - SDS sodium dodecyl sulfate - PAGE polyacrylamide gel electrophoresis - Neu5Ac N-acetylneuraminic acid - BSM bovine submandibular gland mucin - GD1a IV³Neu5Ac, II³Neu5Ac-GgOse₄Cer - GM1 II³Neu5Ac-GgOse₄Cer - MU-Neu4,5Ac₂ 4-methylumbelliferyl--d-N-acetyl-4-O-acetylneuraminic acid - TLC thin-layer chromatography - HPTLC high performance thin-layer chromatography - EDTA ethylenediamine tetraacetic acid - EGTA ethylene glycol bis(2-aminoethyl-ethen)-N,N,N,N-tetraacetic acid - BSA bovine serum albumin - Neu5Ac2en 2-deoxy-2,3-didehydro-N-acetylneuraminic acid - IEF isoelectric focusing - IEP isoelectric point     

Spectroscopic investigation of the interaction of water-soluble azocalix[4]arenes with bovine serum albumin

In this work, three hydrosoluble azocalix[4]arene derivatives, 5-(o-methylphenylazo)-25,26,27-tris(carboxymethoxy)-28-hydroxycalix[4]arene (o-MAC-Calix), 5-(m-methylphenylazo)-25,26,27-tris(carboxymethoxy)-28-hydroxycalix[4]arene (m-MAC-Calix) and 5-(p-methylphenylazo)-25,26,27-tris(carboxymethoxy)-28-hydroxycalix[4]arene (p-MAC-Calix) were synthesized. Their structures were characterized by infrared spectrum (IR), nuclear magnetic resonance spectrum (¹H NMR and ¹³C NMR) and mass spectrum (MS). The interactions between these compounds and bovine serum albumin (BSA) were studied by fluorescence spectroscopy, UV–vis spectrophotometry and circular dichroic spectroscopy. According to experimental results, three azocalix[4]arene derivatives can efficiently bind to BSA molecules and the o-MAC-Calix displays more efficient interactions with BSA molecules than m-MAC-Calix and p-MAC-Calix. Molecular docking showed that the o-MAC-Calix was embedded in the hydrophobic cavity of helical structure of BSA molecular and the tryptophan (Trp) residue of BSA molecular had strong interaction with o-MAC-Calix. The fluorescence quenching of BSA caused by azocalix[4]arene derivatives is attributed to the static quenching process. In addition, the synchronous fluorescence spectroscopy indicates that these azocalix[4]arene derivatives are more accessible to Trp residues of BSA molecules than the tyrosine (Tyr) residues. The circular dichroic spectroscopy further verified the binding of azocalix[4]arene derivatives and BSA.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.