Bioanalysis of drugs by liquid-phase microextraction coupled to separation techniques

The demand for automation of liquid-liquid extraction (LLE) in drug analysis combined with the demand for reduced sample preparation time has led to the recent development of liquid-phase microextraction (LPME) based on disposable hollow fibres. In LPME, target drugs are extracted from aqueous biological samples, through a thin layer of organic solvent immobilised within the pores of the wall of a porous hollow fibre, and into an microl volume of acceptor solution inside the lumen of the hollow fibre. After extraction, the acceptor solution is subjected directly to a final analysis either by high performance liquid chromatography (HPLC), capillary electrophoresis (CE), mass spectrometry (MS), or capillary gas chromatography (GC) without any further treatments. Hollow fibre-based LPME may provide high enrichment of drugs and excellent sample clean-up, and probably has a broad application potential within the area of drug analysis. This review focuses on the principle of LPME, and recent applications of three-phase, two-phase, and carrier mediated LPME of drugs from plasma, whole blood, urine, and breast milk.     

Development of a dispersive liquid-liquid microextraction method for spectrophotometric determination of barbituric acid in pharmaceutical formulation and biological samples

In this paper, a novel and simple method for the determination of trace amounts of barbituric acid in water and biological samples was developed by using dispersive liquid–liquid microextraction (DLLME) techniques combined with spectrophotometric analysis. The procedure is based on color reaction of barbituric acid with p-dimethylaminobenzaldehyde and extraction of the color product using the DLLME technique. Some important parameters such as reaction conditions and the type and volume of extraction and dispersive solvents as well as the extraction time were investigated and optimized in detail. Under the optimum conditions, the calibration graphs were linear over the range of 5.0 to 200 ng ml⁻¹ with limit of detection of 2.0 ng ml⁻¹. Relative standard deviation for five replicate determinations of barbituric acid at 50 ng ml⁻¹ concentration level was calculated to be 1.64%. Average recoveries for spiked samples were determined to be between 94% and 105%. The proposed method was applied for the determination of barbituric acid in pharmaceutical formulation and biological samples.     

Application of solid-phase microextraction combined with derivatization to the determination of amphetamines by liquid chromatography

This work evaluates the utility of solid-phase microextraction (SPME) in the analysis of amphetamines by liquid chromatography (LC) after chemical derivatization of the analytes. Two approaches have been tested and compared, SPME followed by on-fiber derivatization of the extracted amphetamines, and solution derivatization followed by SPME of the derivatives formed. Both methods have been applied to measure amphetamine (AP), methamphetamine (MA), and 3,4-methylenedioxymethamphetamine (MDMA), using the fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) and carbowax-templated resin (CW-TR)-coated fibers. Data on the application of the proposed methods for the analysis of different kind of samples are presented. When analyzing aqueous solutions of the analytes, both approaches gave similar analytical performance, but the sensitivity attainable with the solution derivatization/SPME method was better. The efficiencies observed when processing spiked urine samples by the SPME/on-fiber derivatization approach were very low. This was because the extraction of matrix components into the fiber coating prevented the extraction of the reagent. In contrast, the efficiencies obtained for spiked urine samples by the solution derivatization/SPME approach were similar to those obtained for aqueous samples. Therefore, the later method would be the method of choice for the quantification of amphetamines in urine.     

Improvement and validation the method using dispersive liquid-liquid microextraction with in situ derivatization followed by gas chromatography-mass spectrometry for determination of tricyclic antidepressants in human urine samples

A simple, rapid and sensitive method termed dispersive liquid-liquid microextraction (DLLME) combined with gas chromatography-mass spectrometry (GC/MS) was developed for the determination of tricyclic antidepressants (TCAs) in human urine sample. An appropriate mixture of methanol (disperser solvent), carbon tetrachloride (extraction solvent), and acetic anhydride (derivatization reagent) was injected rapidly into human urine sample. After extraction, the sedimented phase was analyzed by GC/MS. The calibration curves obtained with human urine were linear with a correlation coefficient of over 0.99 in the range of 2.0/5.0-100 ng mL(-1). Under the optimum conditions (carbon tetrachloride: 10 μL, methanol: 150 μL), the detection limits and the quantification limits of the tricyclic antidepressants were 0.5-2.0 ng mL(-1) and 2.0-5.0 ng mL(-1), respectively. The average recoveries of TCAs were 88.2-104.3%. Moreover, the inter- and intra-day precision and accuracy was acceptable at all concentrations. The results showed that DLLME is applicable to the determination of trace amounts of TCAs in human urine sample.     

Developments in multiple headspace extraction

This paper reviews new developments in multiple headspace extraction (MHE), especially its combination with two miniaturized extraction techniques, solid-phase microextraction (SPME) and single-drop microextraction (SDME). The combination of the techniques broadens the applicability of SPME and SDME to quantitative determination of analytes in complex liquid and solid matrixes. These new methods offer several advantages over traditional liquid-solid, liquid-liquid and headspace extraction techniques. The potential applications include extraction of volatiles and semivolatiles from environmental and physiological samples and from different polymer products such as medical and biomedical materials, food packaging and building materials. The theoretical principals of the techniques are also briefly reviewed.     

Developments in multiple headspace extraction

This paper reviews new developments in multiple headspace extraction (MHE), especially its combination with two miniaturized extraction techniques, solid-phase microextraction (SPME) and single-drop microextraction (SDME). The combination of the techniques broadens the applicability of SPME and SDME to quantitative determination of analytes in complex liquid and solid matrixes. These new methods offer several advantages over traditional liquid–solid, liquid–liquid and headspace extraction techniques. The potential applications include extraction of volatiles and semivolatiles from environmental and physiological samples and from different polymer products such as medical and biomedical materials, food packaging and building materials. The theoretical principals of the techniques are also briefly reviewed.     

A new strategy for ionization enhancement by derivatization for mass spectrometry

Liquid chromatography-mass spectrometry (LC-MS) using atmospheric pressure ionization is drastically different from hitherto available analytical methods used to detect polar analytes. The electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) sources of MS have contributed to the advancement of LC-MS and LC-MS/MS techniques for the analysis of biological samples. However, one major obstacle is the weak ionization of some analytes in the ESI and APCI techniques. In this review, we introduce high-sensitivity methods using several derivatization reagents for ionization enhancement. We also present an overview of chemical derivatization methods that have been applied to small molecules, such as amino acids and steroids, in biological samples.     

Three-phase liquid-phase microextraction of weakly basic drugs from whole blood

The behaviour of weak basic analytes in liquid-phase microextraction (LPME) and the optimisation of parameters in whole blood are described. Benzodiazepines and non-benzodiazepine drugs were chosen as model substances. Liquid-phase microextraction based on disposable polypropylene hollow fibres was used in the three-phase extraction of five weak bases from whole blood. The sample work up with the liquid-phase microextraction technique can be impeded by low recovery due to incomplete trapping in the acceptor phase of weakly basic drugs and the complexity of the whole blood matrix. Different parameters related to this problem were experimentally studied. Additionally the stability of the analytes was examined because of low pH in the acceptor phase. The investigation resulted in optimised LPME conditions for the extraction of weak bases from whole blood. The parameters limiting the recovery were evaluated.     

A New Chiral Residue Analysis Method for Triazole Fungicides in Water Using Dispersive Liquid‐Liquid Microextraction (DLLME)

A rapid, simple, reliable, and environment‐friendly method for the residue analysis of the enantiomers of four chiral fungicides including hexaconazole, triadimefon, tebuconazole, and penconazole in water samples was developed by dispersive liquid–liquid microextraction (DLLME) pretreatment followed by chiral high‐performance liquid chromatography (HPLC)‐DAD detection. The enantiomers were separated on a Chiralpak IC column by HPLC applying n‐hexane or petroleum ether as mobile phase and ethanol or isopropanol as modifier. The influences of mobile phase composition and temperature on the resolution were investigated and most of the enantiomers could be completely separated in 20 min under optimized conditions. The thermodynamic parameters indicated that the separation was enthalpy‐driven. The elution orders were detected by both circular dichroism detector (CD) and optical rotatory dispersion detector (ORD). Parameters affecting the DLLME performance for pretreatment of the chiral fungicides residue in water samples, such as the extraction and dispersive solvents and their volume, were studied and optimized. Under the optimum microextraction condition the enrichment factors were over 121 and the linearities were 30–1500 µg L^?1 with the correlation coefficients (R²) over 0.9988 and the recoveries were between 88.7% and 103.7% at the spiking levels of 0.5, 0.25, and 0.05 mg L^?1(for each enantiomer) with relative standard deviations varying from 1.38% to 6.70% (n = 6) The limits of detection (LODs) ranged from 8.5 to 29.0 µg L^?1(S/N = 3). Chirality 25:567‐574, 2013. © 2013 Wiley Periodicals, Inc.     

Hollow-fiber-supported liquid phase microextraction with in situ derivatization and gas chromatography-mass spectrometry for determination of chlorophenols in human urine samples

A simple and highly sensitive method that involves hollow-fiber-supported liquid phase microextraction (HF-LPME) with in situ derivatization and gas chromatography-mass spectrometry (GC-MS) was developed for the determination of chlorophenols (CPs) such as 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TrCP), 2,3,4,6-tetrachlorophenol (TeCP) and pentachlorophenol (PCP) in human urine samples. Human urine samples were enzymatically de-conjugated with beta-glucuronidase and sulfatase. After de-conjugation, HF-LPME with in situ derivatization was performed. After extraction, 2mul of extract was carefully withdrawn into a syringe and injected into the GC-MS system. The limits of detection (S/N=3) and quantification (S/N>10) of CPs in the human urine samples are 0.1-0.2ngml(-1) and 0.5-1ngml(-1), respectively. The calibration curve for CPs is linear with a correlation coefficient of >0.99 in the range of 0.5-500ngml(-1) for DCP and TrCP, and of 1-500ngml(-1) for TeCP and PCP, respectively. The average recoveries of CPs (n=6) in human urine samples are 81.0-104.0% (R.S.D.: 1.9-6.6%) with correction using added surrogate standards. When the proposed method was applied to human urine samples, CPs were detected at sub-ngml(-1) level.     

Sorptive extraction techniques in sample preparation for organophosphorus pesticides in complex matrices

Organophosphorus pesticides (OPPs), widely known as persistent organic pollutants, are the most popular contaminants in agriculture products in developing countries. The determination of OPPs in complex matrices, such as food, environmental and biological samples, usually requires extensive sample pretreatment. This review focuses on the sorptive extraction techniques applied as sample pretreatment for OPPs in complex matrices, including solid-phase extraction (SPE) and solid-phase microextraction (SPME). These methods are evaluated and the applications of each technique are demonstrated extensively with many practical examples.     

Extraction and determination of opium alkaloids in urine samples using dispersive liquid-liquid microextraction followed by high-performance liquid chromatography

A simple, rapid and sensitive method based on dispersive liquid-liquid microextraction (DLLME) combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was used to determine opium alkaloids in urine samples. Some effective parameters on extraction were studied and optimized. Under the optimum conditions, enrichment factors and recoveries for different opiates are in the range of 63.0-104.5 and 31.5-52.2%, respectively. The calibration graphs are linear in the range of 0.50-500 μg L(-1) and limit of detections (LODs) are in the range of 0.2-10 μg L(-1). The relative standard deviations (RSDs) for 200 μg L(-1) of morphine, codeine and thebaine, 5.0 μg L(-1) of papaverine and 10.0 μg L(-1) of noscapine in diluted urine sample are in the range of 2.8-6.1% (n=7). The relative recoveries of urine samples spiked with alkaloids are 84.3-106.0%. The obtained results show that DLLME combined with HPLC-UV is a fast and simple method for the determination of opium alkaloids in urine samples.     

Determination of valproic acid in human serum and pharmaceutical preparations by headspace liquid-phase microextraction gas chromatography-flame ionization detection without prior derivatization

An efficient and fast extraction technique for the enrichment of valproic acid from human blood serum samples using the headspace liquid phase microextraction (HS-LPME) combined with gas chromatography (GC) analysis has been developed. The extraction was conducted by suspending a 2 microL drop of organic solvent in a 1 mL serum sample; following 20 min of extraction, withdrawing organic solvent into a syringe and injection into a GC with a flame ionization detector (FID), without any further pre-treatment. Four organic solvents, 1-decanole, benzyl alcohol, 1-octanol and n-dodecane, were studied as extractants, and n-dodecane was found to be the most sensitive solvent for valproic acid. The results revealed that HS-LPME is suitable for the successful extraction of valproic acid from human blood serum samples. Parameters like extraction time, ionic strength, pH, organic solvent volume, and temperature of the sample were studied and optimized to obtain the best extraction results. An enrichment factor of 27-fold was achieved in 20 min. The procedure resulted in a relative standard deviation of <13.2% (n=7) and a linear calibration range from 2 to 20 microg mL(-1) (r>0.98), and the limit of detection was 0.8 microg mL(-1) in serum blank samples. Overall, LPME proved to be a fast, sensitive and simple tool for the preconcentration of valproic acid from real samples. The proposed method was also applied to the analysis of valproate in pharmaceutical preparations.     

Enantioselective analysis of oxybutynin and N-desethyloxybutynin with application to an in vitro biotransformation study

An enantioselective method using liquid-phase microextraction (LPME) followed by HPLC analysis was developed for the determination of oxybutynin (OXY) and its major metabolite N-desethyloxybutynin (DEO) in rat liver microsomal fraction. The LPME procedure was optimized using multifactorial experiments. Under the optimal extraction conditions, the mean recoveries were 61 and 55% for (R)-OXY and (S)-OXY, respectively, and 70 and 76% for (R)-DEO and (S)-DEO, respectively. The validated method was employed to an in vitro biotransformation study using rat liver microsomal fraction. The results demonstrated the enantioselective biotransformation of OXY.     

Protein O-glycosylation analysis

Abstract This review provides an overview on the methods available for analysis of O-glycosylation. Three major themes are addressed: analysis of released O-glycans including different O-glycan liberation, derivatization, and detection methods; analysis of formerly O-glycosylated peptides yielding information on O-glycan attachment sites; analysis of O-glycopeptides, representing by far the most informative but also most challenging approach for O-glycan analysis. Although there are various techniques available for the identification of O-linked oligosaccharides, the focus here is on MS fragmentation techniques such as collision-induced fragmentation, electron capture dissociation, and electron transfer dissociation. Finally, the O-glycan analytical challenges that need to be met will be discussed.     

Rapid determination of trace thiabendazole in apple juice utilizing dispersive liquid–liquid microextraction combined with fluorescence spectrophotometry

Food safety has become a large concern and prompts an urgent need for the development of rapid, simple and sensitive analytical methods that can monitor pesticide residues in foods. This study aimed to provide a method for quantitative determination of trace thiabendazole in apple juice. Due to its high sensitivity and selectivity, fluorescence spectrophotometry was utilized as a front end to dispersive liquid–liquid microextraction (DLLME). The experimental parameters that influenced the extraction were systematically investigated. Under optimum conditions, the whole procedure, including DLLME and analysis of one sample, was carried out within 5 min, and linearity was found in the 5–50 µg/L range with a correlation coefficient (r) of 0.9987. The limit of detection value was 2.2 µg/L. Good reproducibility was achieved based with a less than 4.5% relative standard deviation (RSD) for five replicates at different sample concentrations. This method was shown to be suitable for rapid and sensitive quantification of thiabendazole in apple juice. Copyright © 2015 John Wiley & Sons, Ltd.     

Mapping of Heavy Metal Ion Sorption to Cell-Extracellular Polymeric Substance-Mineral Aggregates by Using Metal-Selective Fluorescent Probes and Confocal Laser Scanning Microscopy

Biofilms, organic matter, iron/aluminum oxides, and clay minerals bind toxic heavy metal ions and control their fate and bioavailability in the environment. The spatial relationship of metal ions to biomacromolecules such as extracellular polymeric substances (EPS) in biofilms with microbial cells and biogenic minerals is complex and occurs at the micro- and submicrometer scale. Here, we review the application of highly selective and sensitive metal fluorescent probes for confocal laser scanning microscopy (CLSM) that were originally developed for use in life sciences and propose their suitability as a powerful tool for mapping heavy metals in environmental biofilms and cell-EPS-mineral aggregates (CEMAs). The benefit of using metal fluorescent dyes in combination with CLSM imaging over other techniques such as electron microscopy is that environmental samples can be analyzed in their natural hydrated state, avoiding artifacts such as aggregation from drying that is necessary for analytical electron microscopy. In this minireview, we present data for a group of sensitive fluorescent probes highly specific for Fe³⁺, Cu²⁺, Zn²⁺, and Hg²⁺, illustrating the potential of their application in environmental science. We evaluate their application in combination with other fluorescent probes that label constituents of CEMAs such as DNA or polysaccharides and provide selection guidelines for potential combinations of fluorescent probes. Correlation analysis of spatially resolved heavy metal distributions with EPS and biogenic minerals in their natural, hydrated state will further our understanding of the behavior of metals in environmental systems since it allows for identifying bonding sites in complex, heterogeneous systems.     

Photochemical tools for studying metal ion signaling and homeostasis

Metal ions have well-established catalytic and structural roles in proteins. Much of the knowledge acquired about metalloenzymes has been derived using spectroscopic techniques and X-ray crystallography, but these methodologies are less effective for studying metal ions that are not tightly bound to biomacromolecules. In order to prevent deleterious chemistry, cells tightly regulate the uptake, distribution, and intracellular concentrations of metal ions. Investigation into these homeostasis mechanisms has necessitated the development of alternative ways to study metal ions. Photochemical tools such as small molecule and protein-based fluorescent sensors as well as photocaged complexes have provided insight into the homeostasis and signaling mechanisms of Ca(2+), Zn(2+), and Cu(+), but a comprehensive picture of metal ions in biology will require additional development of these techniques, which are reviewed in this Current Topics article.