Syntheses of oligopeptides related to the insulin sequence B 22-25 (Arg-Gly-Phe-Phe) (author's transl)]

Syntheses of peptides with the sequences Gly-Phe, Gly-Phe-Phe, Arg-Gly-Phe and Arg-Gly-Phe-Phe are described. They were performed with the free acids, methyl esters and caramides. The peptides correspond partially or directly to the insulin sequence B 22 - 25 (Arg-Gly-Phe-Phe), the tetrapeptide amide or tetrapeptide methyl ester of which shows insulin-like activity (l.c.[1,2]). For testing the structural specificity of the arginyl residue, the following peptides were also synthesised: NG-NO2-Arg-Gly-Phe-Phe-NH2 and -OMe, Orn-Gly-Phe-Phe-NH2 and Cit-Gly-Phe-Phe--NH2. In connection with the above, the syntheses of the new derivatives Nalpha,Ndelta-Z2-L-ornithine p-nitrophenyl ester and N-Boc-L-citrulline p-nitrophenyl ester are described. All peptides were synthesised conventionally.     

Efficient production of biodiesel from high free fatty acid-containing waste oils using various carbohydrate-derived solid acid catalysts

In the present study, such carbohydrate-derived catalysts have been prepared from various carbohydrates such as d-glucose, sucrose, cellulose and starch. The catalytic and textural properties of the prepared catalysts have been investigated in detail and it was found that the starch-derived catalyst had the best catalytic performance. The carbohydrate-derived catalysts exhibited substantially higher catalytic activities for both esterification and transesterification compared to the two typical solid acid catalysts (sulphated zirconia and Niobic acid), and gave markedly enhanced yield of methyl esters in converting waste cooking oils containing 27.8wt% high free fatty acids (FFAs) to biodiesel. In addition, under the optimized reaction conditions, the starch-derived catalyst retained a remarkably high proportion (about 93%) of its original catalytic activity even after 50 cycles of successive re-use and thus displayed very excellent operational stability. Our results clearly indicate that the carbohydrate-derived catalysts, especially the starch-derived catalyst, are highly effective, recyclable, eco-friendly and promising solid acid catalysts that are highly suited to the production of biodiesel from waste oils containing high FFAs.     

Improvement of a process for purification of tocopherols and sterols from soybean oil deodorizer distillate

Soybean oil deodorizer distillate (SODD) is a useful material for purification of tocopherols and phytosterols (referred to as sterols). The SODD was first distilled, and the two substances were enriched. The preparation, which mainly contained free fatty acids (FFAs), sterols, and tocopherols, was named SODD tocopherols/sterols concentrate (SODDTSC). If sterols are converted to steryl esters and FFAs are converted to fatty acid methyl esters (FAMEs), relatively easy purification of tocopherols and steryl esters can be achieved because the boiling points of FAMEs, tocopherols, and steryl esters are different significantly. Hence, the development of a new two-step in situ reaction system was tried out for esterification of sterols with FFAs (first step) and esterification of FFAs with methanol (MeOH) (second step). A mixture of SODDTSC/water (95:5, w/w) and 250 units (U)/g-mixture of Candida rugosa lipase was prepared beforehand for the first-step reaction, and was agitated at 40 °C for 24 h with dehydration at 20 mmHg. Sterols were efficiently esterified, and the degree of esterification reached 95%. To the reaction mixture were added 7 M amounts of MeOH against unreacted FFAs, 20 wt.% water, and 25 U/g-mixture of Alcaligenes sp. lipase. The second-step reaction was then conducted at 30 °C for 20 h. Consequently, 95% FFAs were converted to FAME, and steryl esters synthesized by the first-step reaction were not reconverted to free sterols. Finally, SODDTSC (1.5 kg) was subjected to this two-step in situ reaction, and tocopherols and steryl esters were purified from the reaction mixture by short-path distillation. Tocopherols were purified to 72% (yield, 88%) and steryl esters were purified to 97% (yield, 97%).     

Fatty acid composition of leaf lipids determined after combined digestion and fatty acid methyl ester formation from fresh tissue

A procedure which uses hot methanolic HCl to digest fresh tissue and simultaneously convert the fatty acids of the leaf lipids to the corresponding methyl esters is described. Extraction of the fatty acid methyl esters into a small volume (0.3 ml) of hexane means that a sample for GLC analysis can be taken directly from the tube used for the digestion/methylation reaction. The procedure provides a fatty acid analysis which is comparable to that obtained by a more conventional technique involving separate extraction, saponification, and methylation steps, but the overall yield is reduced by 10-20%. The analysis can be made quantitative by including an internal standard with the tissue sample.     

Cloning, expression and characterization of a lipase gene from the Candida antarctica ZJB09193 and its application in biosynthesis of vitamin A esters

Lipase is one of the most important industrial enzymes, which has been widely used in the preparation of food additives, cosmetics and pharmaceuticals industries. In order to obtain a large amount of lipase, the lipase gene from Candida antarctica ZJB09193 was cloned, and expressed in Pichia pastoris with the vector pPICZαA. Under the optimal conditions, the yield of recombinant lipase in the culture broth reached 3.0 g/L. After purification, the properties of recombinant lipase were studied: the optimum pH and temperature were pH 8.0 and 52°C, Ca(2+) activated the activity of lipase, and the apparent K(m) and V(max) values for p-nitrophenyl acetate were 0.34 mM and 7.36 μmol min(-1) mg(-1), respectively. Furthermore, the recombinant lipase was immobilized on pretreated textile for biosynthesis of vitamin A esters. In a system of n-hexane, 0.3 g immobilized recombinant lipase was used in the presence of 0.06 g vitamin A acetate and 0.55 mmol fatty acid (nine different fatty acids were tested). The yield of all vitamin A esters exceeded 78% in 7h at 30°C except using lactic acid and hexanoic acid as substrates. After optimization, the yield of vitamin A palmitate reached 87%. This study has the potential to be developed into industrial application.     

Quinoline-4-methyl esters as human nonpancreatic secretory phospholipase A₂ inhibitors

A series of novel fused heterocycle methyl esters were designed and synthesized as human nonpancreatic secretory phospholipase A? (hnps-PLA?) competitive inhibitors. Among the 22 synthesized compounds, 17 quinoline-4-methyl esters displayed hnps-PLA? inhibition activity in the in vitro bioassay. The IC?? value for the best compound 3o was 1.5 μM. The structure-inhibition-activity relationships of the compounds were studied using molecular docking.     

Dimethyl carbonate as potential reactant in non-catalytic biodiesel production by supercritical method

In this study, the non-catalytic supercritical method has been studied in utilizing dimethyl carbonate. It was demonstrated that, the supercritical dimethyl carbonate process without any catalysts applied, converted triglycerides to fatty acid methyl esters with glycerol carbonate and citramalic acid as by-products, while free fatty acids were converted to fatty acid methyl esters with glyoxal. After 12 min of reaction at 350 degrees C/20 MPa, rapeseed oil treated with supercritical dimethyl carbonate reached 94% (w/w) yield of fatty acid methyl ester. The by-products from this process which are glycerol carbonate and citramalic acid are much higher in value than glycerol produced by the conventional process. In addition, the yield of the fatty acid methyl esters as biodiesel was almost at par with supercritical methanol method. Therefore, supercritical dimethyl carbonate process can be a good candidate as an alternative biodiesel production process.     

Transesterification of soybean oil catalyzed by sulfated zirconia

Two sulfated zirconias were synthesized and characterized by X-ray diffraction and infrared spectroscopy. They were used as catalysts in the alcoholysis of soybean oil and in the esterification of oleic acid. Using sulfated zirconia prepared by the solvent-free method (S-ZrO(2)) as catalyst, the alcoholysis conversions of soybean oil under optimized conditions (120 degrees C, 1h and 5wt% of catalyst) were 98.6% (methanolysis) and 92% (ethanolysis), respectively. The esterification of oleic acid with methanol was complete after 2h. Zirconia sulfated by standard methods (SZ) had low activity in the methanolysis of soybean oil (conversion of 8.5%) and conventional zirconia (NS) was inactive for methanolysis under the conditions optimized for S-ZrO(2).     

Direct purification of polyadenylated RNAs from isolated polysome fractions

We report a simplified and improved method for obtaining polyadenylated RNAs (poly(A) RNAs) from polysome fractions. Isolated polysomes were subjected directly to poly(U)-Sephadex column chromatography without conventional purification of polysomal RNAs by phenol extraction followed by ethanol precipitation. The yield of poly(A) RNAs by this direct purification method was about twice that obtained by the conventional method. When the two poly(A) RNA preparations were used in two-dimensional polyacrylamide gel electrophoretic analysis of cell-free translation products and cDNA synthesis, biological activity of the directly purified poly(A) RNA was equal to or even better than that of conventionally purified poly(A) RNA.     

Pyridine biodegradation in a novel rotating rope bioreactor

A novel immobilised bioreactor has been developed especially for the treatment of pollutants characterized by high volatility along with high water solubility and low microbial yields. The new bioreactor referred to as the rotating rope bioreactor (RRB) provides higher interfacial area (per unit reactor liquid volume) along with high oxygen mass transfer rate, greater microbial culture stability; and consequently higher substrate loadings and removal rates in comparison to other conventional rectors for the treatment of volatile compounds. Pyridine was used as a model compound to demonstrate the enhanced performance with RRB, when compared to that reported with other conventional bioreactors. The experimental results indicate that the novel RRB system is able to degrade pyridine with removal efficiency of more than 85% at higher pyridine concentration (up to 1000 mg/l) and loading [up to 400 mg/m(2)/h (66.86 g/m(3)/h)], with a shorter hydraulic retention time (9-18 h). The reactor has been in operation for the past 15 months and no loss of activity has been observed.     

Unique reactivity of alpha,beta-unsaturated carboxylic acid imidazolides: catalytic asymmetric synthesis of alpha,beta-epoxy esters and alpha,beta-epoxy carboxylic acid derivatives

Catalytic asymmetric synthesis of alpha,beta-epoxy esters and alpha,beta-epoxy carboxylic acid derivatives is described. Catalytic asymmetric epoxidation of alpha,beta-unsaturated carboxylic acid imidazolides using La-BINOL-Ph(3)As=O complex gave the corresponding alpha,beta-epoxy peroxy tert-butyl esters, which were directly converted to the alpha,beta-epoxy methyl esters by adding methanol to the reaction. This catalytic system had broad generality for epoxidation of various substrates. With the use of 5-10 mol% of the catalyst, both beta-aryl and beta-alkyl-substituted-alpha,beta-epoxy methyl esters were obtained in up to 91% yield and in up to 93% enantiomeric excess. In addition, efficient transformations of alpha,beta-epoxy peroxy tert-butyl esters into the alpha,beta-epoxy amides, alpha,beta-epoxy aldehydes, and gamma,delta-epoxy beta-keto esters are also reported.     

Solid phase synthesis of hydrophobic difficult sequence peptides on BDDMA-PS support.

This article illustrates the successful and efficient solid phase assembly of hydrophobic difficult sequence peptides following both t-Boc and Fmoc chemistry. The peptides were synthesized on an optimized 1,4-butanediol dimethacrylate-crosslinked polystyrene support (BDDMA-PS). Four difficult sequence test peptides, VAVAG, VIVIG, QVGQVELG and VQAAIDYING, were synthesized in relatively good yield and purity without any aggregation problems. The peptides were assembled on chloromethylated and 4-hydroxymethylphenoxymethyl (HMP) BDDMA-PS resins. The peptides were fabricated using Boc amino acid 1-hydroxybenzotriazolyl and Fmoc amino acid pentafluorophenyl active esters in coupling reactions. The peptides after synthesis were cleaved from the polymeric support by exposing the peptidyl resin to 90% trifluroacetic acid/5% thioanisole/5% EDT mixture. The HPLC and MALDI TOF MS studies of the peptides revealed the high homogeneity of the synthesized peptides. Chloromethylated resin having a functional group loading of 1.14 mmol Cl/g was used for the synthesis. The yield and homogeneity of these peptides synthesized using the new support were high when compared with the conventional DVB-PS resin.     

Isolation and characterization of fatty acid methyl ester (FAME)‐producing Streptomyces sp. S161 from sheep (Ovis aries) faeces

An actinomycete producing oil‐like mixtures was isolated and characterized. The strain was isolated from sheep faeces and identified as Streptomyces sp. S161 based on 16S rRNA gene sequence analysis. The strain showed cellulase and xylanase activities. The ¹H nuclear magnetic resonance (NMR) spectra of the mixtures showed that the mixtures were composed of fatty acid methyl esters (52·5), triglycerides (13·7) and monoglycerides (9·1) (mol.%). Based on the gas chromatography–mass spectrometry (GC‐MS) analysis, the fatty acid methyl esters were mainly composed of C14‐C16 long‐chain fatty acids. The results indicated that Streptomyces sp. S161 could produce fatty acid methyl esters (FAME) directly from starch. To our knowledge, this is the first isolated strain that can produce biodiesel (FAME) directly from starch.

Significance and Impact of the Study

Nowadays, production of biodiesel is based on plant oils, animal fats, algal oils and microbial oils. Lipid mostly consists of triacylglycerols (TAG), and conversion of these lipids into fatty acid short‐chain alcohol esters (methanol or ethanol) is the final step in biodiesel production. In this study, an oil‐producing Streptomyces strain was isolated from sheep faeces. The oil was composed of C₁₄‐C₁₆ long‐chain fatty acid methyl esters, triglycerides and monoglycerides. This is the first isolated strain‐producing biodiesel (FAME) directly from starch. Due to showing cellulase and xylanase activities, the strain would be helpful for converting renewable lignocellulose into biodiesel directly.     

Lipase-catalyzed synthesis of vitamin C fatty acid esters

Fatty acid esters of vitamin C (ascorbic acid) where synthesized in a mainly solid-phase system in the presence of small amounts of organic solvent (acetone or t-butanol) catalyzed by immobilized lipase B from Candida antarctica.Highest reaction rates and yields of isolated products were obtained using fatty acid vinyl esters, e.g., 6-O-palmitoyl-l-ascorbic acid was obtained in 91% isolated yield after 48 h. As vitamin C and its esters are very sensitive to oxidation, a mild extraction method for the isolation of reaction products was developed.     

Time course dependent changes in contents and physical properties of glycolipid species in Rhodococcus rhodochrous.

The yield of trehalose dimycolate (TDM), the major glycolipid species elaborated by Rhodococcus rhodochrous, a producer of approx. C40-mycolic acid, was not constant in cells cultured for different periods of time. From cells collected at 24, 36, 72, 144 and 172 h of cultivation the following percentages of TDM in diethyl ether soluble lipids (DESL) were found: 10.8%, 23.4%, 10.0%, 9.0% and 5.0%, respectively. In turn, the cellular content accounted for approx. 0.6%, 1.2%, 0.9%, 0.6% and 0.2%, respectively. On the other hand, the yield of galactose monomycolate (GalMM), a minor glycolipid species maintained at approx. 3.4% in DESL during the different periods of time examined; this value represented about 0.3% of the cellular content. The melting temperatures of TDMs fell between 37 degrees C to approximately 97 degrees C with the lowest value from cells grown for 36 h, whereas the melting temperatures of the GalMMs were in a narrow range between 56 degrees C and 64 degrees C. The methyl ester derivatives of the constituent fatty acid moieties of DTMs and GalMMs migrated on thin layer chromatography like methyl esters of C40-C46 mycolic acids, therefore faster than methyl esters of C28-C34 mycolic acids but slower than methyl esters of C50-C56 mycolic acids. Further analysis of the products of pyrolysis of the methyl ester derivatives of the fatty acid moiety released from TDM after alkaline hydrolysis was carried out using gas chromatography combined mass spectrometry.(ABSTRACT TRUNCATED AT 250 WORDS)     

Large-scale recovery of C-phycocyanin from Spirulina platensis using expanded bed adsorption chromatography

C-phycocyanin was purified on a large scale by a combination of expanded bed adsorption, anion-exchange chromatography and hydroxyapatite chromatography from inferior Spirulina platensis that cannot be used for human consumption. First, phycobiliproteins were extracted by a simple, scaleable method and then were recovered by Phenyl-Sepharose chromatography in an expanded bed column. The purity (the A(620)/A(280) ratio) of C-phycocyanin isolated with STREAMLINE column was up to 2.87, and the yield was as high as 31 mg/g of dried S. platensis. After the first step, we used conventional anion-exchange chromatography for the purification steps, with a yield of 7.7 mg/g of dried S. platensis at a purity greater than 3.2 and with an A(620)/A(650) index higher than 5.0. The fractions from anion-exchange chromatography with a level of purity that did not conform to the above standard were subjected to hydroxyapatite chromatography, with a C-PC yield of 4.45 mg/g of dried S. platensis with a purity greater than 3.2. The protein from both purification methods showed one absolute absorption peak at 620 nm and a fluorescence maximum at 650 nm, which is consistent with the typical spectrum of C-phycocyanin. SDS-PAGE gave two bands corresponding to 21 and 18 kDa. In-gel digestion and LC-ESI-MS showed that the protein is C-phycocyanin.     

Lipase-catalyzed preparation of mono- and diesters of ferulic acid

Lipophilic and stable derivatives of ferulic acid are required to improve its efficacy in fatty foods and to optimize its use in cosmetic and pharmaceutical preparations. We report an improved synthesis of ferulic acid monoesters (ethyl ferulate and lauryl ferulate) using immobilized lipase from Candida antarctica B (CALB) in diisopropyl ether (DIPE). Maximum yields were 89% and 85% in 200 h for ethyl and lauryl ferulate, respectively. Ethyl ferulate was further acylated with vinyl esters to form ferulate diesters. 4-Acetoxy-ethyl ferulate was obtained with the immobilized lipase from Alcaligenes sp. (QLG) with 59% yield in 72 h, whereas 4-dodecanoyloxy-ethyl ferulate (a new compound) was synthesized with 52% yield in 72 h using CALB. DIPE was the best solvent for the transesterifications. Finally, the anti-inflammatory activity of the synthesized derivatives was evaluated in vitro; the compounds bearing a dodecyl chain showed improved anti-inflammatory activity compared with short-chain esters.     

Gallic acid‐based alkyl esters synthesis in a water‐free system by celite‐bound lipase of Bacillus licheniformis SCD11501

Gallic acid (3, 4, 5‐ trihydroxybenzoic acid) is an important antioxidant, anti‐inflammatory, and radical scavenging agent. In the present study, a purified thermo‐tolerant extra‐cellular lipase of Bacillus licheniformis SCD11501 was successfully immobilized by adsorption on Celite 545 gel matrix followed by treatment with a cross‐linking agent, glutaraldehyde. The celite‐bound lipase treated with glutaraldehyde showed 94.8% binding/retention of enzyme activity (36 U/g; specific activity 16.8 U/g matrix; relative increase in enzyme activity 64.7%) while untreated matrix resulted in 88.1% binding/retention (28.0 U/g matrix; specific activity 8.5 U/g matrix) of lipase. The celite‐bound lipase was successfully used to synthesis methyl gallate (58.2%), ethyl gallate (66.9%), n‐propyl gallate (72.1%), and n‐butyl gallate (63.8%) at 55^oC in 10 h under shaking (150 g) in a water‐free system by sequentially optimizing various reaction parameters. The low conversion of more polar alcohols such as methanol and ethanol into their respective gallate esters might be due to the ability of these alcohols to severely remove water from the protein hydration shell, leading to enzyme inactivation. Molecular sieves added to the reaction mixture resulted in enhanced yield of the alkyl ester(s). The characterization of synthesised esters was done through fourier transform infrared (FTIR) spectroscopy and ¹H NMR spectrum analysis. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:715–723, 2015     

Novel Strategy of Using Methyl Esters as Slow Release Methanol Source during Lipase Expression by mut+ Pichia pastoris X33

One of the major issues with heterologous production of proteins in Pichia pastoris X33 under AOX1 promoter is repeated methanol induction. To obviate repeated methanol induction, methyl esters were used as a slow release source of methanol in lipase expressing mut⁺ recombinant. Experimental design was based on the strategy that in presence of lipase, methyl esters can be hydrolysed to release their products as methanol and fatty acid. Hence, upon break down of methyl esters by lipase, first methanol will be used as a carbon source and inducer. Then P. pastoris can switch over to fatty acid as a carbon source for multiplication and biomass maintenance till further induction by methyl esters. We validated this strategy using recombinant P. pastoris expressing Lip A, Lip C from Trichosporon asahii and Lip11 from Yarrowia lipolytica. We found that the optimum lipase yield under repeated methanol induction after 120 h was 32866 U/L, 28271 U/L and 21978 U/L for Lip C, Lip A and Lip 11 respectively. In addition, we found that a single dose of methyl ester supported higher production than repeated methanol induction. Among various methyl esters tested, methyl oleate (0.5%) caused 1.2 fold higher yield for LipA and LipC and 1.4 fold for Lip11 after 120 h of induction. Sequential utilization of methanol and oleic acid by P. pastoris was observed and was supported by differential peroxisome proliferation studies by transmission electron microscopy. Our study identifies a novel strategy of using methyl esters as slow release methanol source during lipase expression.     

A glycerol-free process to produce biodiesel by supercritical methyl acetate technology: An optimization study via Response Surface Methodology

In this study, fatty acid methyl esters (FAME) have been successfully produced from transesterification reaction between triglycerides and methyl acetate, instead of alcohol. In this non-catalytic supercritical methyl acetate (SCMA) technology, triacetin which is a valuable biodiesel additive is produced as side product rather than glycerol, which has lower commercial value. Besides, the properties of the biodiesel (FAME and triacetin) were found to be superior compared to those produced from conventional catalytic reactions (FAME only). In this study, the effects of various important parameters on the yield of biodiesel were optimized by utilizing Response Surface Methodology (RSM) analysis. The mathematical model developed was found to be adequate and statistically accurate to predict the optimum yield of biodiesel. The optimum conditions were found to be 399 °C for reaction temperature, 30 mol/mol of methyl acetate to oil molar ratio and reaction time of 59 min to achieve 97.6% biodiesel yield.