Integration of Controlled Intracellular Pressure Microinjection, lontophoresis, and Membrane Potential Measurement

Abstract: A novel device for intracellular microinjection was designed to integrate controlled pressure microinjection and electrical microinjection (iontophoresis) with membrane poten tial recording and a limited capacity for turgor measurement. The validity of the device was verified by microinjection of a mixture of the fluorescent probes, Texas Red sulfonyl chloride and 10 kDa-LYCH-dextran conjugate, into epidermal cells of var iegated Coleus blumei leaves. Continuous monitoring of the fluorochrome movement by confocal laser scanning microscopy evidenced that the novel device succeeded in differential micro-injection of the fluorescent probes by pressure and iontophor esis. The multifunctionality of the microinjection system was further demonstrated by showing that both microinjection methods functioned in parallel with cellular membrane poten tial measurements in Vicia faba stem tissue. Advantages and prospective applications of the integrated microinjectionjmem-brane potential measurement system are briefly discussed.     

Injection of An. stephensi embryos to generate malaria-resistant mosquitoes

The introduction of exogenous genes into the genomes of mosquitoes requires microinjection techniques tailored to the specific species of interest. This video protocol demonstrates a method used by the James laboratory to microinject DNA constructs into Anopheles stephensi embryos for the generation of transformed mosquitoes. Techniques for preparing microinjection needles, collecting and preparing embryos and performing the microinjection are illustrated.     

Human sperm chromosome complements after microinjection of hamster eggs

A technique was developed for microinjection of human spermatozoa into golden hamster (Mesocricetus auratus) eggs to obtain human pronuclear chromosome complements. Before microinjection the spermatozoa were treated by brief sonication or incubation in TEST-yolk buffer to reduce motility. Very few sperm chromosome complements developed after sperm treatment with sonication and the frequency of spermatozoa with structural chromosomal abnormalities was exceedingly high (91%). The majority of sperm chromosome complements analysed had multiple breaks and rearrangements. Sperm incubation in TEST-yolk buffer before microinjection provided more analysable sperm karyotypes with a significantly lower frequency of structural chromosomal abnormalities (39%, P less than 0.001). Our results therefore suggest that sonication induces structural chromosomal abnormalities in spermatozoa. Since the frequency of chromosomal abnormalities after microinjection was higher than after sperm fertilization of hamster eggs, it appears that microinjection per se may also increase the frequency of chromosomal abnormalities in spermatozoa. These results are based on small numbers and must be confirmed on larger sample sizes, but our study suggests that microinjection of spermatozoa into eggs should not be recommended for clinical use until fully evaluated.     

Preparation of intact yeast artificial chromosome DNA for transgenesis of mice

Transgenesis with large DNA molecules such as yeast artificial chromosomes (YACs) has an advantage over smaller constructs in that an entire locus and all its flanking cis-regulatory elements are included. The key to obtaining animals bearing full-length transgenes is to avoid physical shearing of the DNA during purification and microinjection. This protocol details how to prepare intact YAC DNA for transgenesis of mice and involves separation of YAC DNA from yeast chromosomal DNA by pulsed field gel electrophoresis, concentration to a range suitable for microinjection by second dimension electrophoresis and enzymatic digestion of matrix-embedded YAC DNA to produce a solution that can be injected. The YAC is maintained in an agarose gel matrix to avoid damage until the final steps before microinjection. Special precautions are also taken during the microinjection protocol. Transgenesis efficiency is approximately 15%; most animals carry 1-5 copies of the desired locus. This method takes 6 d for completion.     

Identification of embryogenic microspores of barley (Hordeum vulgare L.) by individual selection and culture and their potential for transformation by microinjection

Summary In order to identify microspores, suitable for transformation via microinjection of DNA, single microspores of barley (Hordeum vulgare L.) were selected after initial preculture of anthers floating on liquid media and analysed for their development in individual culture in microdroplets of culture medium. Conditions for microculture and plant regeneration from single selected embryogenie microspores were established. The technical feasability of intranuclear microinjection was demonstrated by injecting the fluorescent dye Lucifer Yellow. All essential procedures for a transformation system of barley based on microinjection into microspores have thus been performed successfully. Further efforts to increase efficiencies of culture and microinjection procedures are necessary, however, in order to improve the suitability of this approach towards transformation of barley.Abbreviations MES 2 (N-morpholino) ethanesulfonic acid - PEG polyethylene glycol     

High throughput easy microinjection with a single-cell manipulation supporting robot

A single-cell manipulation supporting robot (SMSR) has been developed for the high throughput and easy microinjection. Its concept is to let an experimenter concentrate his/her attention only on the microinjection by facilitating other associated works. SMSR was applied to the microinjection into rice protoplasts and mouse embryonic stem (ES) cells. The microinjection into these cells is exceptionally difficult than usual animal cells such as fibroblasts. In the case of rice protoplast, for example, non-stop microinjection into 100 cells could be done within 1h that was 17-times faster than that of the robot-less work. The success rate was 7-8% that was same level obtained by the robot-less work. The present results indicate that SMSR is a useful machine for the microinjection of specific genes and proteins in living cells to analyze their respective functions, which is an urgent and important subject in the post-genome era.     

Pronuclear microinjection

Last year marked the 20th anniversary of the invention of the term "transgenic" and the development of pronuclear microinjection, a straightforward technique designed to transfer genetic information from nearly any living organism to mammals. After two decades of use, pronuclear microinjection protocols have changed little from the reliable, if not efficient, method described by Gordon and Ruddle. Experience has taught us that once microinjection skills are perfected there are only a few parameters one needs to be concerned about to successfully produce transgenic animals. Those parameters will be discussed, as will some new innovations that promise to finally increase efficiency of pronuclear microinjection methodology.     

Selection of Microspore Derived Embryogenic Structures in Maize Related to Transformation Potential by Microinjection

Microspores are attractive targets for transformation of maize through DNA microinjection since they may allow, through the development of embryogenic structures, the regeneration of transgenic plants without chimerism. Unfortunately, microinjection into unicellular microspores is technically difficult because of the presence of the exine. However, in later stages of development, this difficulty may be overcome. In this regard, our objective was to determine the most suitable stages of early androgenic development for microinjection using lucifer yellow as a marker dye. Experiments have shown that the fluorescent dye is able to spread inside the whole embryogenic structure (about 4–10 days old), only in those cases where internal cell walls are still absent or incompletely formed, as assessed by cytological observations. At later stages, when the septation is completed and the embryo is cellularized, diffusion of the dye is no longer possible. These results demonstrate that multinuclear structures with the broken exine and a cytoplasm not yet partitioned, may be conveniently used for direct transformation via microinjection.     

Antibodies to a nucleolar protein are localized in the nucleolus after red blood cell-mediated microinjection

To determine whether red blood cell-mediated microinjection of antibodies can be used to study nuclear protein localization and function, we microinjected antibodies that have been shown to react specifically with nucleolar acidic phosphoprotein C23 into Walker 256 cells. The intracellular distribution of microinjected anti-C23 antibodies and preimmune immunoglobulins were determined by immunofluorescence. At 3 h after microinjection, affinity-purified anti- C23 antibodies were localized in the cytoplasm and nucleolus. At 17 h after microinjection, the affinity-purified antibody was localized to those nucleolar structures previously shown to contain protein C23. Furthermore, the antibody remained localized in the nucleolus for at least 36 h after microinjection. In contrast to the results obtained with specific antibodies, preimmune immunoglobulins remained in the cytoplasm 36 h after microinjection. These results indicate that red blood cell-mediated microinjection of antibodies can be used to study nucleolar and nuclear antigens.     

Improved developmental potential of rabbit oocytes fertilized by sperm microinjection into the perivitelline space enlarged by hypertonic media

The objectives of the present study were: 1) to develop a simple and more efficient technique for sperm microinjection than is currently available, using the rabbit as a model, and 2) to evaluate the development of rabbit oocytes fertilized by single or multiple sperm microinjection. Hyperosmotic sucrose in phosphate-buffered saline (SPBS) was employed to dehydrate oocytes to increase the perivitelline space for sperm microinjection and prevent possible injury to the vitellus. In the first experiment, 58% (n = 29) oocytes treated with 0.5 M SPBS developed to morulae following multiple sperm microinjection compared, respectively, to 47% (n = 34) and 60% (n = 15) for control IVF with or without sucrose exposure (P greater than 0.05). Blastocyst development from microinjected oocytes, however, was much lower (P less than 0.05) than that of controls (14% vs. 42% and 40%, respectively). Sham operation by puncturing the zona pellucida of the sucrose-treated oocytes with the microinjection pipette did not increase parthenogenesis (P greater than 0.05). In Experiment 2 a smaller-size injection pipette and shorter sucrose exposure time after sperm microinjection resulted in 41% (n = 42) of the oocytes developing into blastocysts for the microinjection group, whereas only 21% (n = 24) developed to blastocysts in the control IVF group (P less than 0.05). When relatively older oocytes (17 hr post ovulation injection) were used to test if microinjection could reduce the time to fertilization and cleavage (Expt. 3), an average of 27% (n = 63) blastocysts resulted from microinjection vs. 0% (n = 28) for the control IVF group.     

Rodent Brain Microinjection to Study Molecular Substrates of Motivated Behavior

Brain microinjection can aid elucidation of the molecular substrates of complex behaviors, such as motivation. For this purpose rodents can serve as appropriate models, partly because the response to behaviorally relevant stimuli and the circuitry parsing stimulus-action outcomes is astonishingly similar between humans and rodents. In studying molecular substrates of complex behaviors, the microinjection of reagents that modify, augment, or silence specific systems is an invaluable technique. However, it is crucial that the microinjection site is precisely targeted in order to aid interpretation of the results. We present a method for the manufacture of surgical implements and microinjection needles that enables accurate microinjection and unlimited customizability with minimal cost. Importantly, this technique can be successfully completed in awake rodents if conducted in conjunction with other JoVE articles that covered requisite surgical procedures. Additionally, there are many behavioral paradigms that are well suited for measuring motivation. The progressive ratio is a commonly used method that quantifies the efficacy of a reinforcer to maintain responding despite an (often exponentially) increasing work requirement. This assay is sensitive to reinforcer magnitude and pharmacological manipulations, which allows reinforcing efficacy and/ or motivation to be determined. We also present a straightforward approach to program operant software to accommodate a progressive ratio reinforcement schedule.     

Generation of Recombinant Chinese Hamster Ovary Cell Lines by Microinjection

Microinjection is a gene transfer technique enabling partial control of plasmid delivery into the nucleus or cytoplasm of cultured animal cells. Here this method was used to establish various recombinant mammalian cell lines. The injection volume was estimated by fluorescence quantification of injected fluorescein isothyocynate (FITC)-dextran. The DNA concentration and injection pressure were then optimized for microinjection into the nucleus or cytoplasm using a reporter plasmid encoding the green fluorescent protein (GFP). Nuclear microinjection was more sensitive to changes in these two parameters than was cytoplasmic microinjection. Under optimal conditions, 80–90% of the cells were GFP-positive 1 day after microinjection into the nucleus or the cytoplasm. Recombinant cell lines were recovered following microinjection or calcium phosphate transfection and analyzed for the level and stability of recombinant protein production. In general, the efficiency of recovery of recombinant cell lines and the stability of reporter protein expression over time were higher following microinjection as compared to CaPi transfection. The results demonstrate the feasibility of using microinjection as a method to generate recombinant cell lines. Revisions requested 27 October 2005; Revisions received 12 December 2005     

The diagonal band of Broca is involved in the pressor pathway activated by noradrenaline microinjected into the periaqueductal gray area of rats

AimsThe dorsal periaqueductal gray area (dPAG) is involved in cardiovascular modulation. Previously, we reported that noradrenaline (NA) microinjection into the dPAG caused a pressor response that was mediated by vasopressin release into the circulation. However, the neuronal pathway that mediates this response is as yet unknown. There is evidence that chemical stimulation of the diagonal band of Broca (dbB) also causes a pressor response mediated by systemic vasopressin release. In the present study, we evaluated the participation of the dbB in the pressor response caused by NA microinjection into the dPAG as well as the existence of neural connections between these areas.Main methodsWith the above goal, we verified the effect of the pharmacological ablation of the dbB on the cardiovascular response to NA microinjection into the dPAG of unanesthetized rats. In addition, we microinjected the neuronal tracer biotinylated-dextran-amine (BDA) into the dPAG and looked for efferent projections from the dPAG to the dbB.Key findingsThe pharmacologically reversible ablation of the dbB with local microinjection of CoCl₂ significantly reduced the pressor response caused by NA microinjection (15 nmol/50 nL) into the dPAG. In addition, BDA microinjection into the dPAG labeled axons in the dbB, pointing to the existence of direct connections between these areas.SignificanceThe present results indicate that synapses within the dbB are involved in the pressor pathway activated by NA microinjection into the dPAG and direct neural projection from the dPAG to the dbB may constitute the neuroanatomic substrate for this pressor pathway.     

ATP-gamma-S (adenosine 5'-0(3-thiotriphosphate)) blocks progesterone-induced maturation of the Xenopus oocyte

ATP-gamma-S microinjection into Xenopus oocyte prevents progesterone induced maturation. Inhibition is time and dose dependent; 50% inhibition occurs when 50 nl of 0.5 mM ATP-gamma-S solution are microinjected/oocyte 1 hr prior to the hormonal trigger. ATP-gamma-S inhibited oocytes can be induced to mature (100%) following microinjection of extracts containing maturation promoting factor (MPF). Our results suggest that the maturation protein(s) has been stabilized in ovo by ATP-gamma-S microinjection, in its phosphorylated inhibitory form.     

Rescue of infectious particles from preassembled alphavirus nucleocapsid cores

Alphaviruses are small, spherical, enveloped, positive-sense, single-stranded, RNA viruses responsible for considerable human and animal disease. Using microinjection of preassembled cores as a tool, a system has been established to study the assembly and budding process of Sindbis virus, the type member of the alphaviruses. We demonstrate the release of infectious virus-like particles from cells expressing Sindbis virus envelope glycoproteins following microinjection of Sindbis virus nucleocapsids purified from the cytoplasm of infected cells. Furthermore, it is shown that nucleocapsids assembled in vitro mimic those isolated in the cytoplasm of infected cells with respect to their ability to be incorporated into enveloped virions following microinjection. This system allows for the study of the alphavirus budding process independent of an authentic infection and provides a platform to study viral and host requirements for budding.     

氯化钠密度梯度离心法制备用于显微注射的外源DNA片段

DNA显微注射是生产转基因动物最可靠和最常使用的一种方法,外源DNA的纯度对显微注射的成功起着至关重要的作用。本文介绍用氯化钠密度梯度离心的方法制备用于显微注射的外源DNA片段。与传统的琼脂糖凝胶回收的方法相比较,用此方法制备的外源DNA片段对小鼠受精卵进行显微注射后,受卵体母鼠的胚胎存活率,以及子代小鼠的外源基因整合率均有明显的提高。这一方法可为进一步提高转基因动物的成功率,提供方法学上的参考。 Abstract:DNA microinjection is the most popular and reliable method of producing transgenic animals.The purity of foreign DNA plays an important role for the success of microinjection.In this study,we introduced the use of sodium chloride step gradients in fractionating foreign DNA fragment for microinjection.The data demonstrated that,compared with the conventional agarose gel extraction method,NaCl purification scheme of toreign DNA could improve the treated embryo survival and foreign DNA intergration rate markedly.     

The effect on butyryl-CoA dehydrogenase of reagents specific for nucleophilic sulphur.

The technique of erythrocyte-mediated microinjection has been successfully adapted for use with cultured muscle cells. Erythrocytes were fused with primary chick myotube cultures with poly(ethylene glycol), and fluorescent antibodies to haemoglobin demonstrated that this protein was injected into the sarcoplasm of myotubes. The microinjection treatment did not significantly alter protein metabolism in the muscle cells as monitored by rates of synthesis and degradation of muscle proteins. 125I-labelled ribonuclease A and bovine serum albumin were degraded with the expected exponential decay kinetics after microinjection into muscle cells, and the half-life of ribonuclease A (40 h) was approximately twice that of bovine serum albumin (17 h). The degradation of ribonuclease A in the muscle cells was enhanced 1.6-fold in the absence of horse serum and chick-embryo extract, whereas the degradation of bovine serum albumin was not altered during deprivation. These results are characteristic of the breakdown of microinjected ribonuclease A and bovine serum albumin in other cell types. Therefore, our experiments indicate the erythrocyte-mediated microinjection is a valid technique to study protein degradation in primary chick muscle cultures.     

黏性卵鱼类受精卵一种快速高效的显微注射方法

黏性卵鱼类受精卵遇水后产生的黏性和卵壳变硬的现象严重影响着大批量显微注射操作的速度和随后的取材。研究建立了一种高效的黏性受精卵快速脱黏显微注射方法, 并利用荧光标记葡聚糖Alex-Fluor488-dextran评估了消化脱黏、直接注射和脱壳注射三种方法的技术特点和适用范围。结果表明: 在23℃, 用0.25%胰蛋白酶(pH=7.1-7.4)消化4min可获得脱黏受精卵。与直接注射和脱壳注射方法相比, 研究建立的消化脱黏方法兼具二者的优点: 在受精后5min可以开始显微操作, 无黏性, 容易进针, 胚盘清晰便于观察、注射后容易培养和取材。实验方法适用于研究与黏性卵鱼类卵子发生、卵-胚转换和早期胚胎发育密切相关基因的功能, 亦可满足追踪受精过程中核质细微变化研究的需要。     

Factors related to successful sperm microinjection of hamster eggs: The effect of sperm species, technical experience, needle dimensions, and incubation medium on egg viability and sperm decondensation following microinjection

A series of experiments was designed to identify factors in a sperm microinjection system that could influence egg viability and decondensation of sperm nuclei after microinjection. Egg viability and sperm decondensation rates were not different among eggs microinjected with rodent sperm. The microinjection of ram sperm required a larger diameter needle for injection, which resulted in low egg viability and sperm decondensation in the first 3 mo of the study but improved greatly after 9 mo of technical experience. The degree of technical experience (3 vs 9 mo) also improved (P<0.05) egg viability after microinjection with rodent sperm; however, the rate of sperm decondensation remained unaffected. Altering the dimensions of the injection needle from a tapered needle barrel to a more uniform needle barrel increased egg viability from 61 to 96% and sperm decondensation from 3 to 27%. The use of medium 199 for incubating microinjected eggs further increased (P<0.05) the percentage of eggs containing decondensed sperm nuclei (52%) compared to eggs incubated in Holmes defined medium (28%). By altering the dimensions of the injection needle, by selecting an appropriate incubation medium, and by gaining technical experience in microinjection, the efficiency of a sperm microinjection system was improved for both rodents and domestic animals.