The essence of DNA sample preparation for MALDI mass spectrometry

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry has become an important analytical technique in nucleic acid research. MALDI is used for quality control of oligonucleotides as well as for analyzing DNA markers. Sample preparation of nucleic acids is crucial for obtaining high-quality mass spectra. Sample purity, solvent content, suitable matrices, and substrate surfaces, as well as laboratory conditions affect spectra quality. This review presents essential information with regard to sample preparation, DNA modification chemistry, and DNA purification, along with a discussion of instrumental advances, which facilitate and extend the applicability of MALDI in genomics.     

Simple and robust two-layer matrix/sample preparation method for MALDI MS/MS analysis of peptides

Recent advances in MALDI MS/MS instrumentation allow a high degree of automation in the efficient detection of peptide fragment ions that can be used for protein identification. However, the performance of the technique is dependent on the MALDI sample preparation. We present a simple and robust two-layer sample preparation method tailored for sensitive and reproducible generation of MALDI MS/MS data. This method produces a strong and uniform crystal layer which allows acquisition of high quality MS/MS spectra over the entire sample surface area. Furthermore, due to its crystal strength, the matrix/sample layer can be washed extensively on target, enabling direct analysis of samples containing impurities, such as salts and surfactants. This method is demonstrated to be very useful in routine analysis of in-gel tryptic digests of silver-stained protein gel spots, without the need of desalting steps or hunting for "hot" spots. As an example, seven threonine-phosphorylated proteins involved in signal transduction in response to growth factor stimulation within the lipid raft fractions of the IMR5 neuroblastoma cells have been identified using differential gel display, in-gel digestion and MALDI MS/MS with the new two-layer sample preparation method. Some of these proteins have the functions of maintaining raft structure or cell signaling.     

Automating MALDI sample plate loading

We describe the design and implementation of a generic robotic solution to automate the loading of MALDI sample plates into a mass spectrometer. The soft- and hardware aspects are described together with the various safety issues that need to be addressed. The automation increases throughput by a factor of between 5- and 80-fold.     

Miniaturized solid-phase extraction and sample preparation for MALDI MS using a microfabricated integrated selective enrichment target

A microfabricated proteomic sample preparation and sample presentation device, Integrated Selective Enrichment Target, (ISET), comprising an array of 96 perforated nanovials is described. Each perforated nanovial can be filled with solid-phase extraction media for purification and concentration of peptides prior to matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). The validity of the ISET sample preparation is shown by analysis of low nM-pM standard samples, as well as biological samples. The ISET solid-phase extraction sample preparation was compared to ZipTip and MassPREP PROtarget sample preparation, demonstrating a superior performance with respect to number of detected peptides and signal intensity of detected peptides.     

苜蓿中华根瘤菌代谢组学样品制备方法的研究

代谢组样品制备是代谢组学研究的基础。本文以维生素B12生产菌株苜蓿中华根瘤菌Sinorhizobium meliloti 320为研究对象,通过检测细胞损伤、ATP泄漏、代谢物回收效率以及细胞代谢淬灭效率综合评价细胞淬灭方法,同时对5种提取试剂的提取效率进行比较优化胞内代谢物的提取方法。最终获得苜蓿中华根瘤菌S.meliloti 320的胞内代谢组学样品制备较佳条件:即-20℃40%甲醇淬灭细胞,过滤收集淬灭细胞,甲醇/乙腈/水(体积比为2∶2∶2,外加0.1%的甲酸)与50%甲醇相结合提取胞内代谢物。实验结果显示-20℃的40%甲醇(通过过滤收集细胞)对细胞膜的损伤较小,且细胞代谢淬灭效率和回收效率较高;甲醇/乙腈/水(体积比为2∶2∶2,外加0.1%的甲酸)与50%的甲醇对胞内代谢物的提取效率较高且有互补作用。     

Microscale sample preparation

The demand for microscale analysis has stimulated the development of new solid phase formats in sample preparation.     

An automated method of sample preparation of biofluids using pierceable caps to eliminate the uncapping of the sample tubes during sample transfer

Biological samples are normally collected and stored frozen in capped tubes until analysis. To obtain aliquots of biological samples for analysis, the sample tubes have to be thawed, uncapped, samples removed and then recapped for further storage. In this paper, we report an automated method of sample transfer devised to eliminate the uncapping and recapping process. This sampling method was incorporated into an automated liquid-liquid extraction procedure of plasma samples. Using a robotic system, the plasma samples were transferred directly from pierceable capped tubes into microtubes contained in a 96-position block. The aliquoted samples were extracted with methyl-tert-butyl ether in the same microtubes. The supernatant organic layers were transferred to a 96-well collection plate and evaporated to dryness. The dried extracts were reconstituted and injected from the same plate for analysis by liquid chromatography with tandem mass spectrometry.     

Trizol-based method for sample preparation and isoelectric focusing of halophilic proteins

A persisting complication in the development of well-resolved two-dimensional PAGE maps of halophilic proteins is their natural incompatibility with isoelectric focusing (IEF). The complete desalting of samples, which is necessary for IEF, tends to aggregate halophilic proteins, often requires relatively large amounts of starting material due to significant loss of sample, and is relatively time-consuming. Here, we describe a method of preparing protein samples from the haloarchaeon Haloferax volcanii that not only desalts the samples thoroughly but also drastically reduces the amount of protein loss associated with previous sample preparation methods and prevents protein aggregation during the removal of salt. This method of sample preparation, which incorporates Trizol (phenol/guanidine isothiocyanate), can easily be extended to analyze halophilic proteins from other organisms.     

Integration of surface plasmon resonance with mass spectrometry: automated ligand fishing and sample preparation for MALDI MS using a Biacore 3000 biosensor.

Integrating surface plasmon resonance analysis with mass spectrometry allows detection and characterization of molecular interactions to be complemented with identification of interaction partners. We have developed a procedure for Biacore 3000 that automatically performs all steps from ligand fishing and recovery to sample preparation for matrix-assisted laser desorption/ionization (MALDI) mass spectrometry including on-target digestion. In the model system used in this study a signal transduction protein, calmodulin, was selectively captured from brain extract by one of its interaction partners immobilized on a sensor chip. The bound material was eluted, deposited directly onto a MALDI target, and analyzed by mass spectrometry both as an intact protein and after on-target tryptic digestion. The procedure with direct deposition of recovered material on the MALDI target reduces sample losses and, in combination with automatic sample processing, increases the throughput of surface plasmon resonance mass spectrometry analysis.     

Sample preparation and bioinformatics in MALDI profiling of urinary proteins

One of the challenges of current proteomics research is identifying healthy and diseased mass spectrometric (MS) patterns within biological fluids. As a result, sample preparation methodologies, as well as the mathematical tools utilized for MS data analysis become pivotal. This study involves a thorough evaluation of the reproducibility and protein resolution that various urinary protein preparation methodologies provide in MALDI MS analysis. Several precipitation approaches, ultrafiltration, as well as direct dilution of urine in MALDI MS compatible buffers were applied in combination to a thorough bioinformatics analysis of the generated MS data. Our results indicate that ultrafiltration, as well as direct dilution of urine in TFA, can provide information rich and reproducible spectra for mass ranges up to 20 kDa. The importance of the presence of peak reproducibility filters when generating disease classification models is suggested.     

GraFix: sample preparation for single-particle electron cryomicroscopy

We developed a method, named GraFix, that considerably improves sample quality for structure determination by single-particle electron cryomicroscopy (cryo-EM). GraFix uses a glycerol gradient centrifugation step in which the complexes are centrifuged into an increasing concentration of a chemical fixation reagent to prevent aggregation and to stabilize individual macromolecules. The method can be used to prepare samples for negative-stain, cryo-negative-stain and, particularly, unstained cryo-EM.     

Development and evaluation of a micro- and nanoscale proteomic sample preparation method

Challenges associated with the efficient and effective preparation of micro- and nanoscale (micro- and nanogram) clinical specimens for proteomic applications include the unmitigated sample losses that occur during the processing steps. Herein, we describe a simple "single-tube" preparation protocol appropriate for small proteomic samples using the organic cosolvent, trifluoroethanol (TFE) that circumvents the loss of sample by facilitating both protein extraction and protein denaturation without requiring a separate cleanup step. The performance of the TFE-based method was initially evaluated by comparisons to traditional detergent-based methods on relatively large scale sample processing using human breast cancer cells and mouse brain tissue. The results demonstrated that the TFE-based protocol provided comparable results to the traditional detergent-based protocols for larger, conventionally sized proteomic samples (>100 microg protein content), based on both sample recovery and numbers of peptide/protein identifications. The effectiveness of this protocol for micro- and nanoscale sample processing was then evaluated for the extraction of proteins/peptides and shown effective for small mouse brain tissue samples (approximately 30 microg total protein content) and also for samples of approximately 5000 MCF-7 human breast cancer cells (approximately 500 ng total protein content), where the detergent-based methods were ineffective due to losses during cleanup and transfer steps.     

Optimization of a sample preparation method for the metabolomic analysis of clinically relevant bacteria

Metabolomics, or metabolite profiling, is an approach that is increasingly used to study the metabolism of diverse organisms, elucidate biological processes and/or find characteristic biomarkers of physiological states. Here, we describe the optimization of a method for global metabolomic analysis of bacterial cultures, with the following steps. Cells are grown to log-phase, starting from an overnight culture and bacterial concentrations are monitored by measuring the optical density of the cultures at 600 nm. At an appropriate density they are harvested by centrifugation, washed three times with NaCl solution and metabolites are extracted using methanol and a bead-mill. Dried extracts are methoxymated and derivatized with methyltrimethylsilyltrifluoroacetamide (MSTFA) then analyzed using gas chromatography coupled to time-of-flight mass spectrometry (GC-MS/TOF). Finally, patterns in the acquired data are examined by multivariate data modeling. This method enabled us to obtain reproducible metabolite profiles of Yersinia pseudotuberculosis, with about 25% compound identification, based on comparison with entries in available GC-MS libraries. To assess the potential utility of the method for comparative analysis of other bacterial species we analyzed cultures of Pseudomonas aeruginosa, Salmonella typhimurium, Escherichia coli and methicillin-sensitive Staphylococcus aureus (MSSA). Multivariate analysis of the acquired data showed that it was possible to differentiate the species according to their metabolic profiles. Our results show that the presented procedure can be used for metabolomic analysis of a wide range of bacterial species of clinical interest.     

An improved sample preparation method for analyzing mycobacterial proteins in two-dimensional gels

Two-dimensional gel electrophoresis (2-DE) is currently a widely used analytical method for resolving complex mixtures of proteins. Sample preparation has a marked influence on 2-DE pattern. To reduce impurities and to increase the low-abundance proteins, protein precipitation is often used for the preparation of samples before 2-DE. In this study, we revealed that addition of SDS prior to TCA precipitation of mycobacterial cell extract proteins increases the resolution of the 2-D gel pattern.     

Electron cryotomography sample preparation using the Vitrobot

Electron cryotomography is the highest-resolution structural technique currently available that can be applied to unique objects such as flexible large protein complexes, irregular viruses, organelles and small cells. Specimens are preserved in a near-native, 'frozen-hydrated' state by vitrification. The thickness of the vitreous ice must be optimized for each specimen, and gold fiducials are typically added to facilitate image alignment. Here, we describe in detail our protocols for electron cryotomography sample preparation including (i) introduction of fiducial markers into the sample and (ii) sample vitrification. Because we almost exclusively use an automated, climate-controlled plunge-freezing device (the FEI Vitrobot) to vitrify our samples, we discuss its operation and parameters in detail. A session in which eight grids are prepared takes 1.5-2 h.     

Comparison of ultrafiltration units for proteomic and N-glycoproteomic analysis by the filter-aided sample preparation method

The filter-aided sample preparation (FASP) method allows gel-free processing of biological samples solubilized with detergents for proteomic analysis by mass spectrometry. In FASP detergents are removed by ultrafiltration, and after protein digestion peptides are separated from undigested material. Here we compare the effectiveness of different filtration devices for analysis of proteomes and glycoproteomes. We show that Microcon and Vivacon filtration units with nominal molecular weight cutoffs of 30,000 and 50,000 (30 and 50 k, respectively) are equally suitable for FASP, whereas Microcon 30 k units are most appropriate for mapping of N-glycosylation sites. The use of filters with these relatively large cutoffs facilitates depletion of detergents.