Confocal laser scanning microscopy as an analytical tool in chromatographic research

In recent years, confocal laser scanning microscopy has been developed into a non-invasive tool to probe intra-particle profiles of protein in chromatographic adsorbents. A necessary prerequisite when using this technique lies in the labeling of proteins with fluorescent probes. The quality of the obtained results is thus strongly dependent on the probes used, its sensitivity on experimental parameters and the change of protein characteristics upon binding. In this review, the fundamental issues when using fluorescent probes are described, before giving a critical evaluation on published literature in the field of confocal laser scanning microscopy for the analysis of chromatographic principles.     

Confocal laser scanning microscopy of fluorescently stained wood cells: a new method for three-dimensional imaging of xylem elements

Summary Xylem cells were fluorescently stained with periodic acid — Schiff reaction or with Schiffs reagent alone and studied by confocal laser scanning microscopy. Single images with extremely low depth of focus, series of optical sections, computed stereo scopic images and shadow casting images as well as x-z images are obtained. In contrast to scanning electron microscopy, not only are the surfaces imaged, but elements concealed by other structures can be visualized by this system. Quantitative data on cell depth are provided and differences in lignification are detected.     

Confocal microscopy and plant cell biology: A perfect match

Abstract

The present short introduction to confocal microscopy in plant cell biology is meant to be a reference addressed to those who are approaching these studies. Optical and genetic techniques developed over the last years have revolutionised plant cell biology. They enable in vivo studies of cell organisation, mainly based on the use of confocal microscopy and derivatives of the Green Fluorescent Protein (GFP). Such fluorescent proteins are extremely useful tools for directly monitoring gene expression and protein localisation, and for selectively labelling sub-cellular structures. GFP-expressing plants can be directly examined by confocal microscopy to obtain high-resolution optical sections of intact tissues and to allow time-lapse observation of dynamic processes. The application of such approaches to the investigation of root cell responses during arbuscular mycorrhizal colonisation is discussed.     

Structure brings clarity: Structured illumination microscopy in cell biology

Biological samples are three dimensional and, therefore, optical sectioning is mandatory for microscopic images to precisely show the localization or function of structures within biological samples. Today, researchers can choose from a variety of methods to obtain optical sections. This article focuses on structured illumination microscopy, which is a group of techniques utilizing a combination of optics and mathematics to obtain optical sections: A structure is imaged onto the sample by optical means and the additional information thereby encoded in the image is used to calculate an optical section from several acquired images. Different methods of structured illumination microscopy (mainly grid projection and aperture correlation) are discussed from a practical point of view, concentrating on advantages, limitations and future prospects of these techniques and their use in cell biology. Structured illumination can also be used to obtain super-resolution information if structures of higher frequency are projected onto the sample. This promising approach to super-resolution microscopy is also briefly discussed from a user's perspective.     

Confocal laser scanning microscopy in orthopaedic research

Confocal laser scanning microscopy (CLSM) is a type of high-resolution fluorescence microscopy that overcomes the limitations of conventional widefield microscopy and facilitates the generation of high-resolution 3D images from relatively thick sections of tissue. As a comparatively non-destructive imaging technique, CLSM facilitates the in situ characterization of tissue microstructure. Images generated by CLSM have been utilized for the study of articular cartilage, bone, muscle, tendon, ligament and menisci by the foremost research groups in the field of orthopaedics including those teams headed by Bush, Errington, Guilak, Hall, Hunziker, Knight, Mow, Poole, Ratcliffe and White. Recent evolutions in techniques and technologies have facilitated a relatively widespread adoption of this imaging modality, with increased "user friendliness" and flexibility. Applications of CLSM also exist in the rapidly advancing field of orthopaedic implants and in the investigation of joint lubrication.     

Confocal scanning optical microscopy and three-dimensional imaging

Summary— Confocal scanning optical microscopy has significant advantages over conventional fluorescence microscopy: it rejects the out-of-locus light and provides a greater resolution than the wide-field microscope. In laser scanning optical microscopy, the specimen is scanned by a diffraction-limited spot of laser light and the fluorescence emission (or the reflected light) is focused onto a photodetector. The imaged point is then digitized, stored into the memory of a computer and displayed at the appropriate spatial position on a graphic device as a part of a two-dimensional image. Thus, confocal scanning optical microscopy allows accurate non-invasive optical sectioning and further three-dimensional reconstruction of biological specimens. Here we review the recent technological aspects of the principles and uses of the confocal microscope, and we introduce the different methods of three-dimensional imaging.     

Imaging of plant microtubules with high resolution scanning electron microscopy

Summary High resolution scanning electron microscopy was used to obtain images of cortical microtubules and associated structures in onion root tips. Specimens were prepared using a modified quick-freeze deep-etch technique utilising cytosolic extraction with saponin and conductive staining with osmium.Abbreviations DMSO dimethylsulfoxide - HRSEM high resolution scanning electron microscope/microscopy - MTSB microtubule stabilising buffer - TEM transmission electron microscope/microscopy     

Raising the speed limits for 4D fluorescence microscopy

Three-dimensional time-lapse (4D) fluorescence microscopy is becoming a routine experimental tool. This article summarizes current technologies, and describes a new method for speeding image acquisition during 4D confocal microscopy.     

激光扫描共聚焦显微镜对人类染色体三维结构的观察

为了获得染色体内部结构的多种信息,以及对染色体形态构建提供有益的尝试,本试验利用荧光染料的特异性标记及激光扫描共聚焦显微镜的连续断层扫描和三维重建的特点,对人类染色体的形态结构进行观测,结果显示：本方法不仅能显示染色体的荧光带纹的分布状况,而且能作染色体内部的一系列光学切片和染色体三维结构的观测。     

Field emission scanning electron microscopy of plant cells

Summary Two basic specimen preparation protocols that allow field emission scanning electron microscope imaging of intracellular structures in a wide range of plants are described. Both protocols depend on freeze fracturing to reveal areas of interest and selective removal of cytosol. Removal of cytosol was achieved either by macerating fixed tissues in a dilute solution of osmium tetroxide after freeze fracturing or by permeabilizing the membranes in saponin before fixation and subsequent freeze fracturing. Images of a variety of intracellular structures including all the main organelles as well as cytoskeletal components are presented. The permeabilization protocol can be combined with immunogold labelling to identify specific components such as microtubules. High-resolution three-dimensional imaging was combined with immunogold labelling of microtubules and actin cables in cell-free systems. This approach should be especially valuable for the study of dynamic cellular processes (such as cytoplasmic streaming) in live cells when used in conjunction with modern fluorescence microscopical techniques.Abbreviations DMSO dimethylsulfoxide - FESEM field emission scanning electron microscope (-scopy) - MTSB microtubule-stabilizing buffer - PBS phosphate-buffered saline - SEM scanning electron microscope (-scopy) - TEM transmission electron microscope (-scopy)     

Mobile arrays of vacuole ripples are common in plant cells

In tobacco (Nicotiana tabacum L.), a structure frequently interpreted as endoplasmic reticulum, was clearly identified as a set of ripple-shaped protrusions of the vacuole into the surrounding cytoplasm. The occurrence in other species suggests that these ripples might be common in vacuolated plant cells. The apparent mobility of the ripples depends on the integrity of the F-actin network. This raises questions concerning the precise composition and architecture of the cytoplasm/vacuole border. The stereotypic concept of the central vacuole as a kind of inflated balloon with a smooth surface has to be debated. Received: 7 November 1997 / Revision received: 27 April 1998 / Accepted: 28 April 1998     

激光扫描共聚焦显微镜在医学研究中的应用

激光扫描共聚焦显微镜（Confocal laser scanning microscope,CLSM）具有高分辨率、高灵敏度、三维重建、动态分析等优点,使图像更为精确清晰和数字化。该仪器现已广泛应用于细胞生物学、生理学、病理学、遗传学和药理学等研究领域中。本文简述了激光扫描共聚焦显微镜的结构、工作原理并归纳了其在医学各领域研究中的应用。     

Use of confocal laser scanning microscopy on soil thin-sections for improved characterization of microbial growth in unconsolidated soils and aquifer materials

Confocal laser scanning microscopy (CLSM) was utilized to examine samples from an aquifer microcosm that was used to investigate microbially mediated losses in hydraulic conductivity. Samples were fixed, dehydrated and dried to prepare the biological material in a fashion similar to that used previously for viewing under the scanning electron microscope. Then, samples were prepared as thin-sections by employing soil micromorphological techniques. Serial images generated by the CLSM technique were visualized using computer three-dimensional rendering software. Results from the CLSM technique were compared with simple fluorescence microscopy of thin-sections and scanning electron microscopy (SEM) of samples from the microcosm. Computer visualization of serial sections with the CLSM technique provided images on a submicron scale in three dimensions. SEM has a much higher resolution, on a nanometer scale, but the results are not three dimensional. Artifacts associated with thin-section preparation are minimal for natural porous media composed mostly of sand, such as aquifer materials. Also, CLSM images are affected minimally by changes to biological material due to sample preparation, whereas artifacts associated with SEM images are very prominent, due to the higher magnification and resolution. CLSM of thin-sections and SEM are very powerful methods for viewing microbial growth in natural porous media, but CLSM is preferable because it allows three-dimensional visualization and measurements of cells and aggregates with few artifacts.     

Impairment of anterograde and retrograde neurofilament transport after anti-kinesin and anti-dynein antibody microinjection in chicken dorsal root ganglia

The purpose of the present study was to investigate the participation of the motor proteins kinesin and dynein in axonal transport of neurofilaments (NF) in cultured dorsal root ganglia neurons. Therefore, we performed live-recording studies of the green fluorescent protein-tagged neurofilament M (GFP-NF-M) to assay transport processes in neurons. Co-localization studies revealed that GFP-NF-M was capable to build a functional NF network with other NF subunits, including phosphorylated heavy neurofilaments (NF-H-PH). Time-lapse recordings using confocal laser scanning microscopy exhibited fast transport of NF dots in anterograde and retrograde direction through a photobleached gap. Following microinjection of anti-kinesin antibodies or colchicine treatment an impairment of anterograde as well as retrograde NF transport was observed during live-recording experiments. In contrast, microinjection of anti-dynein antibodies only impaired retrograde transport of NF whereas the anterograde movement of GFP-NF-M was unaffected. Treatment of the cells with unspecific antibodies had no effect.     

Field emission scanning electron microscopy of microtubule arrays in higher plant cells

Summary Specimen preparation protocols that allow field emission scanning electron microscope imaging of microtubules in plant cells were developed, involving simultaneous permeabilization with saponin and stabilization of microtubules with taxol. All categories of microtubule array were observed in onion root tip cells and in tobacco BY-2 cells grown in suspension culture and synchronized to provide high frequencies of mitotic stages. Cortical arrays consist of overlapping microtubules with free ends; individual microtubules directly overlie individual microfibrils in the cell wall. Preprophase bands and spindle microtubule bundles were also imaged. Phragmoplasts revealed early stages of wall deposition in the included cell plates and features interpreted as relating to high rates of microtubule turnover at the growing margins. It was possible to combine high resolution three-dimensional imaging with immunogold labelling of microtubules. Individual gold particles were readily distinguished decorating microtubules in the preparations; the method should be vaulable for studying many features of plant cell microtubules and their associated macromolecules.Abbreviations FESEM field emission gun scanning electron microscope - MTSB microtubule stabilising buffer Dedicated to Professor Eldon H. Newcomb in recognition of his contributions to cell biology     

双重荧光染色监测听毛细胞游离钙

豚鼠耳蜗分离外毛细胞经fluo-3和fura-red染色后,用激光扫描共聚焦显微镜监测其胞内游离钙的空间分布和动态变化,以fluo-3/fura-red荧光比值大小指示游离钙浓度的高低。外毛细胞胞内游离钙呈不均匀分布,荧光比值分别为细胞质1.71±0.85,质膜1.61±0.75,表皮板1.47±0.65及胞核1.39±0.66,显示细胞质游离钙浓度最高而胞核游离钙浓度最低。静息状态下连续扫描时荧光比值变化小于0.1,而在受到机械刺激后荧光比值增加幅度达0.3—1.2。实验结果表明,fluo-3和fura-red双发射比例法能更准确反映听毛细胞胞内钙的空间分布和动态变化,第二信使钙可能参与了听毛细胞的机械-电换能过程,研究了换能过程中听毛细胞钙信号的时空模式。     

Three-dimensional structure of living chloroplasts as visualized by confocal scanning laser microscopy

Summary The newly developed confocal scanning laser microscope, together with image processing by computer, has been used to obtain three-dimensional information on the organization of grana in chloroplasts in living plant tissue. Chloroplasts are ideally suited for such studies because their pigments show bright autofluorescence. The high-resolution stereo images bridge a gap between classic light microscopy and electron microscopy. Our preliminary observations on several plant species resemble most the early observations of Strugger (1951: Die Strukturordnung im Chloroplasten. Ber Deutsch Bot Ges 64: 69–83) and suggest that the 3-D technique might well be suitable to solve discrepancies in the interpretation of classical light microscopic and electron microscopic observations.Abbreviations 3-D three dimensional - CSLM confocal scanning laser microscopy - DCMU 3-(3,4-dichlorophenyl)-1,1-dimethyl urea - DNA deoxyribonucleic acid     

Structural analysis of microparticles by confocal laser scanning microscopy

This study demonstrates the potential of conforcal laser scanning microscopy (CLSM) as a characterization tool for different types of microparticles. Microparticles were prepared by various methods including complex coacervation, spray drying, double emulsion solvent evaporation technique, and ionotropic gelation. Protein drugs and particle wall polymers were covalently labeled with a fluorescent marker prior to particle preparation, while low molecular weight drugs were labeled by mixing with a fluorescent marker of similar solubility properties. As was demonstrated in several examples, CLSM allowed visualization of the polymeric particle wall composition and detection of heterogeneous polymer distribution or changes in polymer matrix composition under the influence of the drug. Furthermore, CLSM provides a method for three-dimensional reconstruction and image analysis of the microparticles by imaging several coplanar sections throughout the object. In conclusion, CLSM allows the inspection of internal particle structures without prior sample destruction. It can be used to localize the encapsulated compounds and to detect special structural details of the particle wall composition.     

四唑盐减低法结合激光共聚焦显微镜定量分析表皮葡萄球菌生物被膜体外模型

目的建立体外表皮葡萄球菌(Staphylococcus epidermidis)生物膜(biofilm,BF)模型,观察和定量分析表皮葡萄球菌BF的动态形成过程。方法采用可形成BF的表皮葡萄球菌RP62A,平板法建立体外BF模型,四唑盐(tetrazolium salt,XTT)减低法定量检测BF形成过程中细菌活力的变化,激光共聚焦显微镜(confocal laser scan-ning microscopy,CLSM)结合图像结构分析软件(image structure analyer,ISA)对BF形成过程结构参数进行动态分析,扫描电镜(scanning electron microscope,SEM)观察BF形成过程中的形态结构。结果在12、24和48 h时,XTT减低法A450的值分别为2.39±0.48、3.41±0.18和3.92±0.27,P0.05;ISA软件定量分析显示在区域孔径(AP)的值分别为0.84±0.08、0.68±0.01和0.59±0.13,P0.05,平均扩散距离(ADD)的值分别为1.34±0.24、1.49±0.09和1.89±0.39,P0.05,结构熵(TE)的值分别为4.71±0.82、8.69±0.68和8.94±0.28,24 h、48 h与12 h相比,P0.05。结论表皮葡萄球菌BF的形成是个动态的过程,24 h时BF基本形成,48 h BF结构更加复杂。XTT减低法,CLSM结合ISA软件,SEM三种方法联合使用是观察和定量分析体外BF模型较理想的方法。