Intramolecular DNA triplexes in supercoiled plasmids. I. Effect of loop size on formation and stability

The capacity of four oligopurine.oligopyrimidine (pur.pyr) sequences with different lengths of interruptions in the center [GAA)4(N)n(GAA)4G) (n = 3, 5, 7, and 9) to adopt intramolecular DNA triplexes was evaluated in recombinant plasmids. The hyperreactive patterns of the pur.pyr inserts to specific chemical probes (OsO4, diethyl pyrocarbonate, and dimethyl sulfate) at the base pair level demonstrate that intramolecular triplexes with identical 12-base triads in the stem but with different loop sizes (4, 6, 8, and 10 bases) can form in supercoiled plasmids. Furthermore, the extent of OsO4 modification was measured as a function of temperature and of average negative supercoil density. In addition, the transition free energy of B-DNA to triplexes at pH 4.5 was determined by two-dimensional electrophoresis. These comparative studies show that longer loops require more supercoil energy for triplex formation and are less thermostable than triplexes with shorter loops. Also, it may be that not only the loop size but the base composition of the loop region affects the structural transition and triplex stability. Thus, these results significantly broaden the range of natural pur.pyr sequences that may adopt triplexes.     

Unusual thermal stability of RNA/[RP-PS]-DNA/RNA triplexes containing a homopurine DNA strand

Homopurine deoxyribonucleoside phosphorothioates, as short as hexanucleotides and possessing all internucleotide linkages of RP configuration, form a triple helix with two RNA or 2'-OMe-RNA strands, with Watson-Crick and Hoogsteen complementarity. Melting temperature and fluorescence quenching experiments strongly suggest that the Hoogsteen RNA strand is parallel to the homopurine [RP-PS]-oligomer. Remarkably, these triplexes are thermally more stable than complexes formed by unmodified homopurine DNA molecules of the same sequence. The triplexes formed by phosphorothioate DNA dodecamers containing 4-6 dG residues are thermally stable at pH 7.4, although their stability increases significantly at pH 5.3. FTIR measurements suggest participation of the C2-carbonyl group of the pyrimidines in the stabilization of the triplex structure. Formation of triple-helix complexes with exogenously delivered PS-oligos may become useful for the reduction of RNA accessibility in vivo and, hence, selective suppression/inhibition of the translation process.     

Quantitative analysis of the ion-dependent folding stability of DNA triplexes

A DNA triplex is formed through binding of a third strand to the major groove of a duplex. Due to the high charge density of a DNA triplex, metal ions are critical for its stability. We recently developed the tightly bound ion (TBI) model for ion-nucleic acids interactions. The model accounts for the potential correlation and fluctuations of the ion distribution. We now apply the TBI model to analyze the ion dependence of the thermodynamic stability for DNA triplexes. We focus on two experimentally studied systems: a 24-base DNA triplex and a pair of interacting 14-base triplexes. Our theoretical calculations for the number of bound ions indicate that the TBI model provides improved predictions for the number of bound ions than the classical Poisson-Boltzmann (PB) equation. The improvement is more significant for a triplex, which has a higher charge density than a duplex. This is possibly due to the higher ion concentration around the triplex and hence a stronger ion correlation effect for a triplex. In addition, our analysis for the free energy landscape for a pair of 14-mer triplexes immersed in an ionic solution shows that divalent ions could induce an attractive force between the triplexes. Furthermore, we investigate how the protonated cytosines in the triplexes affect the stability of the triplex helices.     

Physico-chemical studies on DNA triplexes containing an alternate third strand with a non-nucleotide linker

Differential scanning calorimetric (DSC), circular dichroism (CD) and molecular mechanics studies have been performed on two triple helices of DNA. The target duplex consists of 16 base pairs in alternate sequence of the type 5′-(purine)_m(pyrimidine)_m-3′. In both the triplexes, the third oligopyrimidine strand crosses the major groove at the purine–pyrimidine junction, with a simultaneous binding of the adjacent purine tracts on alternate strands of the Watson–Crick duplex. The switch is ensured by a non-nucleotide linker, the 1,2,3 propanetriol residue, that joins two 3′–3′ phosphodiester ends. The third strands differ from each other for a nucleotide in the junction region. The resulting triple helices were termed 14-mer-PXP and 15-mer-PXP (where P=phosphate and X=1,2,3-propanetriol residue) according to the number of nucleotides that compose the third strand. DSC data show two independent processes: the first corresponding to the dissociation of the third strand from the target duplex, the second to the dissociation of the double helix in two single strands. The two triple helices show the same stability at pH 6.6. At pH 6.0, the 15-mer-PXP triplex is thermodynamically more stable than the 14-mer-PXP triplex. Thermodynamic data are discussed in relation to structural models. The results are useful when considering the design of oligonucleotides that can bind in an antigene approach to the DNA for therapeutic purposes.     

Effects of polyamines on the thermal stability and formation kinetics of DNA duplexes with abnormal structure

The effects of ions (i.e. Na⁺, Mg²⁺ and polyamines including spermidine and spermine) on the stability of various DNA oligonucleotides in solution were studied. These synthetic DNA molecules contained sequences that mimic various cellular DNA structures, such as duplexes, bulged loops, hairpins and/or mismatched base pairs. Melting temperature curves obtained from the ultraviolet spectroscopic experiments indicated that the effectiveness of the stabilization of cations on the duplex formation follows the order of spermine > spermidine > Mg²⁺ > Na⁺ > Tris–HCl buffer alone at pH 7.3. Circular dichroism spectra showed that salts and polyamines did not change the secondary structures of those DNA molecules under study. Surface plasmon resonance (SPR) observations suggested that the rates of duplex formation are independent of the kind of cations used or the structure of the duplexes. However, the rate constants of DNA duplex dissociation decrease in the same order when those cations are involved. The enhancement of the duplex stability by polyamines, especially spermine, can compensate for the instability caused by abnormal structures (e.g. bulged loops, hairpins or mismatches). The effects can be so great as to make the abnormal DNAs as stable as the perfect duplex, both kinetically and thermodynamically. Our results may suggest that the interconversion of various DNA structures can be accomplished readily in the presence of polyamine. This may be relevant in understanding the role of DNA polymorphism in cells.     

Intramolecular DNA triplexes in supercoiled plasmids. II. Effect of base composition and noncentral interruptions on formation and stability

The effects of interruptions in the homopurine bias and the G+C content of the homopurine.homopyrimidine (pur.pyr) sequences on intramolecular triplex formation and stability in supercoiled plasmids were evaluated. In addition, the interconversion of triplex and duplex, after altering the stabilizing factors (low pH or supercoiling), was studied. We conclude: (a) a 42-base pair pur.pyr sequence with three consecutive interruptions does not form a large triplex with three unpaired nucleotides in the stem. Instead, a mixture of two smaller (27- and 28-nucleotide) triplexes forms. (b) A 28-nucleotide sequence with a single interruption forms a triplex with one unpaired nucleotide in the stem. This interruption causes the triplex to be 7 degrees C less thermostable and requires more superhelical energy for formation than the control triplex. (c) As the G+C content of a pur.pyr sequence increases, the thermostability of the triplex increases and the triplex requires less supercoiling for formation. (d) The interconversion between duplex and triplex is fast. After negative supercoiling is removed, all triplex becomes duplex in about 3 min. When the pH is shifted from 8.0 to 5.2, the conversion of duplex to triplex in a negatively supercoiled plasmid is complete in less than 2 min. Hence, these kinetic properties are consistent with important biological roles for triplexes. In summary, the results from both this and the accompanying paper show that a substantial amount of sequence imperfections is tolerated for triplex formation and stability.     

Spectroscopic and molecular docking studies on chlorambucil interaction with DNA

Chlorambucil (CMB) is an anticancer drug used for the treatment of variety of cancers. Structural and conformational changes associated with DNA after binding with CMB were explored using spectroscopic techniques to get insight into the mechanism of action of CMB at molecular level. Different molar ratios of CMB-DNA complex were prepared with constant DNA concentration under physiological conditions. FTIR spectroscopy, UV-visible spectroscopy, CD spectroscopy and molecular docking studies were employed to determine the binding site and binding constant of CMB with DNA. The results show CMB binds DNA through nitrogenous bases (thymine, guanine and cytosine). The binding constant was calculated to be 1.3×10(3)M(-1), which suggests weak binding of CMB with DNA double helix. FTIR and CD results show that CMB do not disturb native B-conformation of DNA and it continues to remain in its B conformation even at higher concentrations of CMB. The molecular docking results are in corroboration with our experimental results and provides structural insight into the interaction site.     

Sequence specific hydrogen bond of DNA with denaturants affects its stability: Spectroscopic and simulation studies

BackgroundSeveral different small molecules have been used to target the DNA helix in order to treat the diseases caused by its mutation. Guanidinium(Gdm⁺) and urea based drugs have been used for the diseases related to central nervous system, also as the anti-inflammatory and chemotherapeutic agent. However, the role of Gdm⁺ and urea in the stabilization/destabilization of DNA is not well understood.MethodsSpectroscopic techniques along with molecular dynamics (MD) simulation have been performed on different sequences of DNA in the presence of guanidinium chloride (GdmCl) and urea to decode the binding of denaturants with DNA and the role of hydrogen bond with the different regions of DNA in its stability/destability.Results and conclusionOur study reveals that, Gdm⁺ of GdmCl and urea both intrudes into the groove region of DNA along with the interaction with its phosphate backbone. However, interaction of Gdm⁺ and urea with the nucleobases in the groove region is different. Gdm⁺ forms the intra-strand hydrogen bond with the central region of the both sequences of DNA whereas inter-strand hydrogen bond along with water assisted hydrogen bond takes place in the case of urea. The intra-strand hydrogen bond formation capability of Gdm⁺ with the nucleobases in the minor groove of DNA decreases its groove width which probably causes the stabilization of B-DNA in GdmCl. In contrast, the propensity of the formation of inter-strand hydrogen bond of urea with the nucleobases in the groove region of DNA without affecting the groove width destabilizes B-DNA as compared to GdmCl. This study depicts that the opposite effect of GdmCl and urea on the stability is a general property of B-DNA. However, the extent of stabilization/destabilization of DNA in Gdm⁺ and urea depend on its sequence probably due to the difference in the intra/inter-strand hydrogen bonding with different bases present in both the sequences of DNA.General significanceThe information obtained from this study will be useful for the designing of Gdm⁺ based drug molecule which can target the DNA more specifically and selectively.     

Spectroscopic investigatons on the structural thermal stability of leucine aminopeptidase. ESR, CD and fluorescence studies]

The thermal behaviour of leucine aminopeptidase (LAP, EC: 3.4.11.1) from bovine eye lens has been investigated in the temperature region 20--70 degrees C by spin-labelling of SH-groups (ESR), by CD and by fluorescence of tryptophane residues. Enzymatic activity of LAP was compared with spectroscopic data in this temperature region. From 20-60 degrees C the structural parts (alpha, beta, random coil) estimated from CD spectra remain unchanged. Within 20-55 degrees C no irreversible exposure of tryptophane residues takes place. In both types of spin-labelled LAP the strong immobilizing environment of the label retains its highly ordered structure up to 55 degrees C. Reversible changes of mobility and polarity of the environment of the label induced by temperature within 20-50 degrees C do not reduce the enzymatic activity and are regarded as local loosening of ordered structure. At 65 degrees C strong precipitation occurs. From 55 degrees C to 65 degrees C tryptophane residues are irreversibly exposed. The highly ordered environment of the label is destroyed about 55 degrees C, and a considerable amount of spin label molecules is reduced at the NO group by exposed SH groups. The above mentioned local loosening of structure becomes irreversible at 60 degrees C. The environment of both labels dominating above 60 degrees C is highly mobile and strongly polar and represents an extensively unfolded conformation. Until 60 degrees C no essential disordering of protein structure leading to a decrease of enzymatic activity occurs. Above 60 degrees C a sharp breakdown of ordered structures takes place, which is accompanied by a strong diminution of enzymatic activity.     

Spectroscopic studies of interaction of chlorobenzylidine with DNA

Electronic absorbance and fluorescence titrations are used to probe the interaction of chlorobenzylidine with DNA. The binding of chlorobenzylidine to DNA results in hypochromism, a small shift to a longer wavelength in the absorption spectra, and emission quenching in the fluorescence spectra. These spectral characteristics suggest that chlorobenzylidine binds to DNA by an intercalative mode. This conclusion is reinforced by fluorescence polarization measurements. Scatchard plots constructed from fluorescence titration data give a binding constant of 1.3 x 10(5) M(-1) and a binding site size of 10 base pairs. This indicates that chlorobenzylidine has a high affinity with DNA. The intercalative interaction is exothermic with a Van't Hoff enthalpy of -143 kJ/mol. This result is obtained from the temperature dependence of the binding constant. The interaction of chlorobenzylidine with DNA is affected by the pH value of the solution. The binding constant has its maximum at pH 3.0. Upon binding to DNA, the fluorescence from chlorobenzylidine is quenched efficiently by the DNA bases and the fluorescence intensity tends to be constant at high concentrations of DNA when the binding is saturated. The Stern-Volmer quenching constant obtained from the linear quenching plot is 1.6 x 10(4) M(-1) at 25 degrees C. The measurements of the fluorescence lifetime and the dependence of the quenching constant on the temperature indicate that the fluorescence quenching process is static. The fluorescence lifetime of chlorobenzylidine is 1.9 +/- 0.4 ns.     

Oligonucleotide-minor groove binder conjugates and their complexes with complementary DNA: effect of conjugate structural factors on the thermal stability of duplexes

Synthetic polycarboxamide minor groove binders (MGB) consisting of N-methylpyrrole (Py), N-methylimidazole (Im), N-methyl-3-hydroxypyrrole (Hp) and beta-alanine (beta) show strong and sequence-specific interaction with the DNA minor groove in side-by-side antiparallel or parallel orientation. Two MGB moieties covalently linked to the same terminal phosphate of one DNA strand stabilize DNA duplexes formed by this strand with a complementary one in a sequence-specific manner, similarly to the corresponding mono-conjugated hairpin structures. The series of conjugates with the general formula Oligo-(L-MGB-R)m was synthesized, where m = 1 or 2, L = linker, R = terminal charged or neutral group, MGB = -(Py)n-, -(Im)n- or -[(Py/Im)n-(CH2)3CONH-(Py/Im)n-] and I < n < 5. Using thermal denaturation, we studied effects of structural factors such as m and n, linker L length, nature and orientation of the MGB monomers, the group R and the backbone (DNA or RNA), etc. on the stability of the duplexes. Structural factors are more important for linear and hairpin monophosphoroamidates than for parallel bis-phosphoroamidates. No more than two oligocarboxamide strands can be inserted into the duplex minor groove. Attachment of the second sequence-specific parallel ligand [-L(Py)4R] to monophosphoroamidate conjugate CGTTTATT-L(Py)4R leads to the increase of the duplex Tm, whereas attachment of [-L(Im)4R] leads to its decrease. The mode of interaction between oligonucleotide duplex and attached ligands could be different (stacking with the terminal A:T pair of the duplex or its insertion into the minor groove) depending on the length and structure of the MGB.     

Triplex formation at physiological pH: comparative studies on DNA triplexes containing 5-Me-dC tethered at N4 with spermine and tetraethyleneoxyamine.

Oligodeoxynucleotides with spermine conjugation at C4 of 5-Me-dC ( sp -ODN) exhibit triple helix formation with complementary Watson-Crick duplexes, and were optimally stable at physiological pH 7.3 and low salt concentration. This was attributed to a favored reassociation of the polycationic third strand with the anionic DNA duplex. To gain further insights into the factors that contribute to the enhancement of triplex stability and for engineering improved triplex systems, the spermine appendage at C4 of 5-Me-dC was replaced with 1,11-diamino-3,6,9-trioxaundecane to create teg -ODNs. From the triple helix forming abilities of these modified ODNs studied by hysteresis behaviour and the effect of salts on triplex stability, it is demonstrated here that teg- ODNs stabilise triplexes through hydrophobic desolvation while sp -ODNs stabilise triplexes by charge effects. The results imply that factors in addition to base stacking effects and interstrand hydrogen bonds are significantly involved in modulation of triplex stability by base modified oligonucleotides.     

Investigation of the formation and intracellular stability of purine.(purine/pyrimidine) triplexes.

In a previous work we showed that a short triple helix-forming oligonucleotide (TFO) targeted to the murine c-pim-1 proto-oncogene promoter gives a very stable triple helix under physiological conditions in vitro . Moreover, this triplex was stable inside cells when preformed in vitro . However, we failed to detect triplex formation for this sequence inside cells in DMS footprinting studies. In the present work, in order to determine whether our previous in vivo results are limited to this particular short triplex or can be generalized to other purine.(purine/pyrimidine) triplexes, we have tested three other DNA targets already described in the literature. All these purine.(purine/pyrimidine) triplexes are specific and stable at high temperature in vitro . In vivo studies have shown that the preformed triplexes are stable inside cells for at least 3 days. This clearly demonstrates that intracellular conditions are favourable for the existence of purine. (purine/pyrimidine) triplexes. The triplexes can also be formed in nuclei. However, for all the sequences tested, we were unable to detect any triple helix formation in vivo in intact cells by DMS footprinting. Our results show that neither (i) chromatinization of the DNA target, (ii) intracellular K+concentration nor (iii) cytoplasmic versus nuclear separation of the TFO and DNA target are responsible for the intracellular arrest of triplex formation. We suggest the existence of a cellular mechanism, based on a compartmentalization of TFOs and/or TFO trapping, which separates oligonucleotides from the DNA target. Further work is needed to find oligonucleotide derivatives and means for their delivery to overcome the problem of triplex formation inside cells.     

DNA condensation with polyamines I. Spectroscopic studies

The addition of polyamines with three or four positive charges to very dilute solutions of phage T7 DNA leads to a co-operative condensation. The reaction is very rapid and the DNA remains in the B-form as characterized by circular dichroism. The particles which are formed are roughly the size of a phage particle when they are prepared for electron microscopy. This aspect is discussed more completely in the accompanying paper (Chattoraj et al., 1978).Most of the experiments were performed at low ionic strength (roughly 0.002 m) with the triamine, spermidine. The reaction also occurs in 0.15 m-sodium chloride but here the experiments are accompanied by slow irreversible effects which are evidently due to aggregation since they are accompanied by a commensurate increase in turbidity. Consequently, most of the experiments have been done under the reversible low ionic strength conditions.Neither Mg²⁺ nor the diamine putrescine produce the reaction at concentrations similar to those found in bacterial cells. The tetramer spermine, on the other hand, which is not found in bacterial cells, is a very strong condensation agent in the μm region. The spermidine analog, bis-(3-aminopropyl)amine is very similar in behavior to spermidine.The role which polyamines might play in the condensation of DNA in phage heads is discussed.     

The effect of amino groups on the stability of DNA duplexes and triplexes based on purines derived from inosine

The effect of amino groups attached at positions 2 and 8 of the hypoxanthine moiety in the structure, reactivity and stability of DNA duplexes and triplexes is studied by means of quantum mechanical calculations, as well as extended molecular dynamics (MD) and thermodynamic integration (MD/TI) simulations. Theoretical estimates of the change in stability related to 2′-deoxyguanosine (G) → 2′-deoxyinosine (I) → 8-amino-2′-deoxyinosine (8AI) mutations have been experimentally verified, after synthesis of the corresponding compounds. An amino group placed at position 2 stabilizes the duplex, as expected, and surprisingly also the triplex. The presence of an amino group at position 8 of the hypoxanthine moiety stabilizes the triplex but, surprisingly, destabilizes the duplex. The subtle electronic redistribution occurring upon the introduction of an amino group on the purine seems to be responsible for this surprising behavior. Interesting ‘universal base’ properties are found for 8AI.     

Spectroscopic studies of the multiple binding modes of a trimethine-bridged cyanine dye with DNA

The interaction between DNA and a benzothiazole-quinoline cyanine dye with a trimethine bridge (TO-PRO-3) results in the formation of three noncovalent complexes. Unbound TO-PRO-3 has an absorption maximum (λ_max) of 632 nm, while the bound dyes (with calf thymus DNA) have electronic transitions with λ_max = 514nm (complex I), 584nm (complex II) and 642 nm (complex III). The blue shifts in the electronic transitions and the bisignate shape of the circular dichroism bands indicate that TO-PRO-3 aggregates with DNA. Complex I has a high dye:base pair stoichiometry, which does not depend on base sequence or base modifications. The bound dyes exhibit strong interdye coupling, based on studies with a short oligonucleotide and on enhanced resonance scattering. From thermal dissociation studies, the complex is weakly associated with DNA. Studies with poly(dGdC)₂ and poly(dIdC)₂ and competitive binding with distamycin demonstrate that complex II is bound in the minor groove. This complex stabilizes the helix against dissociation. For complex III, the slightly red-shifted electronic transition and the stoichiometry are most consistent with intercalation. Using poly(dAdT)₂, the complexes have the following dye mole fractions (X_dye): X_dye = 0.65 (complex I), 0.425 (complex II) and 0.34 (complex III).     

Spectroscopic studies on the complex formation of suramin with bovine and human serum albumin.

The binding of suramin to bovine and human serum albumin was investigated by gel filtration and spectroscopic measurements. Besides some low-affinity binding sites suramin has, on the bovine serum albumin molecule one and on the human serum albumin molecule two, high-affinity binding sites. Spectroscopic measurements reveal that there are large differences between the albumins in the mechanism of binding to the high-affinity binding sites. Further, it is suggested that high concentrations of suramin provoke an unfolding of the albumin moleculse. In order to explain the unusual behaviour of suramin in connection with the displacement of other ligands from the albumin binding the fluorescence probe 1-anilino-8-naphthalenesulfonic acid (ANS) was employed as a reporter group molecule for fluorescence as well as circular dichroism measurements. By these measurements it could be shown that suramin greatly influences the microorganization of both albumin molecules. In the case of these measurements large differences between bovine and human serum albumin were also found.     

Spectroscopic studies of (m5dC-dG)3: thermal stability of B- and Z-forms.

The hexanucleoside pentaphosphate d(m5CpGpm5CpGpm5CpG) has been studied in solution by ultra-violet absorption, circular dichroism and 31P nuclear magnetic resonance under various experimental conditions. In 0.2 M NaClO4 at low temperature, an hexamer duplex is formed which has a B or B-like conformation. As the salt concentration is increased, a transition from a B-form to the Z-form occurs and is complete in 3 M NaClO4. In 3 M NaClO4, the behavior of the Z double helix is complex as a function of temperature. The variation of the circular dichroism at 295 nm is biphasic. A first transition occurs over a large range of temperature and corresponds to a conformational change due to a non-cooperative intramolecular process. Ultra-violet absorption and 31P nuclear magnetic resonance show that the new conformation arising from a distortion of the backbone is not similar to that observed in low salt conditions (B-form). At high hexanucleotide concentration, aggregates are formed. The second transition is cooperative and corresponds to the melting of a double stranded helix into single strands.     

Influence of formamide on the thermal stability of DNA

The utility of formamide in the denaturation and renaturation of DNA has been examined. The melting temperature of duplex DNA is lowered by 0·6°C per per cent formamide. The depression of melting temperature is independent of the GC content. Formamide also increases the width of the thermal transition. Upto 30%, it does not affect the rate of DNA reassociation