Expression of thermostable alkaline protease gene from Thermoactinomyces sp. E79 in E. coli and heat activation of the gene product

The expression of Thermoactinomyces sp. E79 protease gene cloned into E. coli was highly host-dependent and the levels of protease expression was most stable in E. coli RR1 and E. coli HB101. Heating the intracellular extract at 70°C for 15 min converted the inactive recombinant E79 protease to its active mature form and also resulted in purification of the enzyme in a single step. Addition of 10 mM CaCl2 to the E79 protease decreased its autolysis and increased its thermal stability. © Rapid Science Ltd. 1998     

A new thermostable proteinase from Thermoactinomyces SP.27a. Cloning and gene expression

A library of Thermoactinomyces sp. 27a, producer of thermostable proteases of different groups, has been created. Gene coding for thermostable neutral proteinase was cloned and expressed in Bac. subtilis cells. Restriction map for cloned DNA fragment was created and physicochemical parameters of recombinant proteinase were characterized. The thermostability and optimum of proteolytic activity of the enzyme was lower than in the natural Thermoactinomyces sp. strain, which can be due to heterologous expression of the gene coding for thermostable protein in the mesophilic host.     

Rotihibin A,a Novel Plant Growth Regulator,from Streptomyces sp.

A thermophilic Thermoactinomyces sp. E79 producing a highly thermostable alkaline protease was isolated from soil. The protease, produced extracellularly by Thermoactinomyces sp. E79, was purified by DEAE-Sepharose CL-6B and Butyl-Toyopearl 650M column chromatography. The relative molecular mass was estimated to be 31,000 by SDS–polyacrylamide gel electrophoresis. Enzyme activity was inhibited by phenylmethylsulfonyl fluoride, suggesting the enzyme to be a serine protease. The optimum temperature for the enzyme activity was 85°C, and about 50% of the original activity remained after incubation at 90°C for 10 min in the presence of Ca^{2 +} . The optimum pH for the enzyme activity was 11.0 and the enzyme was fairly stable from pH 5.0 to 12.0. The gene for this thermostable alkaline protease was cloned in Escherichia coli and the expressed intracellular enzyme was activated by heat treatment. Sequence analysis showed an open reading frame of 1,152 base pairs, coding for a poiypeptide of 384 amino acids. The polypeptide was composed of a signal sequence (25 amino acids), a prosequence (81 amino acids), and a mature protein of 278 amino acids. The deduced amino acid sequence of the mature protease had high similarity with thermitase, a serine protease from Thermoactinomyces vulgaris, and the extent of sequence identity was 76%.     

Molecular cloning and sequencing of the gene for a halophilic alkaline serine protease (halolysin) from an unidentified halophilic archaea strain (172P1) and expression of the gene in Haloferax volcanii.

The gene of a halophilic alkaline serine protease, halolysin, from an unidentified halophilic archaea (archaebacterium) was cloned and its nucleotide sequence was determined. The deduced amino acid sequence showed that halolysin consists of 411 amino acids, with a molecular weight of 41,963. The highest homology was found with thermitase from Thermoactinomyces vulgaris. Halolysin has a long C-terminal extension of approximately 120 amino acids which has not been found in other extracellular subtilisin type serine proteases. The gene, hly, was expressed in another halophilic archaea, Haloferax volcanii, in a medium containing 18% salts by using a plasmid shuttle vector which has a novobiocin resistance determinant as a selectable marker.     

Molecular cloning, nucleotide sequence, and expression of the structural gene for alkaline serine protease from alkaliphilic Bacillus sp. 221.

The gene encoding an alkaline serine protease from alkaliphilic Bacillus sp. 221 was cloned in Escherichia coli and expressed in Bacillus subtilis. An open reading frame of 1,140 bases, identified as the protease gene was preceded by a putative Shine-Dalgarno sequence (AGGAGG) with a spacing of 7 bases. The deduced amino acid sequence had a pre-pro-peptide of 111 residues followed by the mature protease comprising 269 residues. The alkaline protease from alkaliphilic Bacillus sp. 221 had higher homology to the protease from alkaliphilic bacilli (82.1% and 99.6%) than to those from neutrophilic bacilli (60.6-61.7%). Also Bacillus sp. 221 protease and other protease from alkaliphilic bacilli shared common amino acid changes and 4 amino acid deletions that seemed to be related to characteristics of the enzyme of alkaliphilic bacilli when compared to the proteases from neutrophilic bacilli.     

A new alkaline serine protease from alkalophilic Bacillus sp.: Cloning,sequencing, and characterization of an intracellular protease

To obtain a new serine protease from alkalophilic Bacillus sp. NKS-21, shotgun cloning was carried out. As a result, a new protease gene was obtained. It encoded an intracellular serine protease (ISP-1) in which there was no signal sequence. The molecular weight was 34,624. The protease showed about 50% homology with those of intracellular serine proteases (ISP-1) from Bacillus subtilis, B. polymyxa, and alkalophilic Bacillus sp. No. 221. The amino acid residues that form the catalytic triad, Ser, His and Asp, were completely conserved in comparison with subtilisins (the extracellular proteases from Bacillus). The cloned intracellular protease was expressed in Escherichia coli, and its purification and characterization were carried out. The enzyme showed stability under alkaline condition at pH 10 and tolerance to surfactants. The cloned ISP-1 digested well nucleoproteins, clupein and salmin, for the substrates.The nucleotide sequence data reported in this paper will appear in the GSDB, DDBJ, EMBL, and NCBI nucleotide sequence databases with the accession number D37921.     

Molecular Cloning,Nucleotide Sequence,and Expression of the Structural Gene for Alkaline Serine Protease from Alkaliphilic Bacillus sp. 221

The gene encoding an alkaline serine protease from alkaliphilic Bacillus sp. 221 was cloned in Escherichia coli and expressed in Bacillus suhtilis. An open reading frame of 1,140 bases, identified as the protease gene was preceded by a putative Shine-Dalgarno sequence (AGGAGG) with a spacing of 7 bases. The deduced amino acid sequence had a pre-pro-peptide of 111 residues followed by the mature protease comprising 269 residues. The alkaline protease from alkaliphilic Bacillus sp. 221 had higher homology to the protease from alkaliphilic bacilli (82.1% and 99.6%) than to those from neutrophilic bacilli (60.6—61.70/0). Also Bacillus sp. 221 protease and other protease from alkaliphilic bacilli shared common amino acid changes and 4 amino acid deletions that seemed to be related to characteristics of the enzyme of alkaliphilic bacilli when compared to the proteases from neutrophilic bacilli.     

Gene Cloning and Expression of an Alkaline Serine Protease with Dehairing Function from <Emphasis Type="Italic">Bacillus pumilus</Emphasis>

A new gene (named AP gene) encoding an alkaline serine protease with dehairing function was cloned from Bacillus pumilus UN-31-C-42 and its nucleotide sequence was determined. The expression of AP gene was induced with IPTG in Escherichia coli after the mature protease region was cloned into pET15b and SDS-PAGE showed expressed product clearly, but no alkaline protease activity was detected. In order to express the AP gene in B. subtilis, a recombinant expression plasmid was constructed which contained a promoter Bp53 (also from B. pumilus), the AP gene and an E. coli–B. subtilis shuttle vector pSUGV4. This plasmid was introduced into B. subtilis WB600 and the transformant displayed the hydrolyzed zone on a milk plate. The expressed product can be easily detected with SDS-PAGE and the fermentation fluid of the transformant showed low alkaline protease activity and dehairing activity. This is the first report of a gene cloned from B. pumilus, encoding an alkaline serine protease, which can alone accomplish the whole dehairing process.     

Cloning,expression, and characterization of an alkaline protease,AprV, from Vibrio sp. DA1-1

Bioprocess and Biosystems Engineering - A novel alkaline protease (named AprV) gene from Vibrio sp. DA1-1 was cloned and expressed in Escherichia coli BL21 (DE3) pLysS. The sequence analysis showed...     

Isolation and growth physiology of novel thermoactinomycetes

A total of 34 thermophilic isolates identified as members of the genus Thermoactinomyces by a range of chemotaxonomic, microscopic and determinativebiochemical tests, were isolated from two acid soils. Growth studies in shake flask and fermenteridentified the isolates to be moderately acidophilic with growth occurring between pH4·5 and 6·0 with optima at pH 5·0. The isolates differed considerablyfrom known Thermoactinomyces cultures in their pH profile, colony morphology andin several biochemical tests.Extracellular enzyme activities are identified and partiallycharacterized in termsof their thermostability, pH and temperature profiles from crude supernatantfluid samples. Optimal protease, amylase and pullulanase activity was observed at pH5·0–5·5 and 75–80 °C with each showing T ₍₅₀₎ values of 10, 30 and 30 min, respectively. A highly thermotolerant extracellularesterase was also identified which retained 50% activity after 8 h at 90°C . This is the firstreport of an acidophilic member of the genus Thermoactinomyces.     

Synthesis of alkaline protease by catabolite repression- resistant Thermoactinomyces sp. E79 mutant

The production of alkaline protease from Thermoactinomyces sp. E79 was repressed by 0.2% (w/v) glucose in the medium. Catabolite repression-resistant mutant M1 was obtained by combined treatment of UV light and N-methyl- N-nitro-N-nitrosoguanidine. The glucose uptake studies accomplished by [14C]glucose showed that the mutant has lost its ability for glucose uptake. The protease production by mutant M1 in the enzyme production medium was 62 U/mg, which was twice that of the wild-type strain.     

Cloning and sequencing of Serratia protease gene.

The gene encoding an extracellular metalloproteinase from Serratia sp. E-15 has been cloned, and its complete nucleotide sequence determined. The amino acid sequence deduced from the nucleotide sequence reveals that the mature protein of the Serratia protease consists of 470 amino acids with a molecular weight of 50,632. The G+C content of the coding region for the mature protein is 58%; this high G+C content is due to a marked preference for G+C bases at the third position of the codons. The gene codes for a short pro-peptide preceding the mature protein. The Serratia protease gene was expressed in Escherichia coli and Serratia marcescens; the former produced the Serratia protease in the cells and the latter in the culture medium. Three zinc ligands and an active site of the Serratia protease were predicted by comparing the structure of the enzyme with those of thermolysin and Bacillus subtilis neutral protease.     

The protein encoded by gvpC is a minor component of gas vesicles isolated from the cyanobacteria Anabaena flos-aquae and Microcyctis sp.

The proteins present in gas vesicles of the cyanobacteria Anabaena flos-aquae and Microcystis sp. were separated by SDS-polyacrylamide gel electrophoresis. Each contained a protein of Mr 22K whose N-terminal amino acid sequences showed homology with that of the Calothrix sp. PCC 7601 gvpC gene product. The gvpC gene from A. flos-aquae was cloned and sequenced. The derived amino acid sequence for the gene product indicated a protein, GVPc, of 193 residues and Mr 21985 containing five highly conserved 33 amino acid repeats. The sequence was identical at the N-terminus to that of the Mr 22K protein present in gas vesicles and showed correspondence to seven tryptic peptides isolated from gas vesicles. This establishes that GVPc forms a second protein component of the gas vesicle, in addition to the main constituent, the 70 residue GVPa. Quantitative amino acid analysis of entire gas vesicles reveals that GVPc accounts for only 2.9% of the protein molecules and 8.2% of the mass present: this is insufficient to form the conical end caps of the gas vesicles. It is suggested that GVPc provides the hydrophilic outer surface of the gas vesicle wall; the 33 amino acid repeats may interact with the periodic structure provided by GVPa.     

Physical characterization of the cloned protease III gene from Escherichia coli K-12.

Analysis of the cloned protease III gene (ptr) from Escherichia coli K-12 has demonstrated that in addition to the previously characterized 110,000-Mr protease III protein, a second 50,000-Mr polypeptide (p50) is derived from the amino-terminal end of the coding sequence. The p50 polypeptide is found predominantly in the periplasmic space along with protease III, but does not proteolytically degrade insulin, a substrate for protease III. p50 does not appear to originate from autolysis of the larger protein. Protease III is not essential for normal cell growth since deletion of the structural gene causes no observed alterations in the phenotypic properties of the bacteria. A 30-fold overproduction of protease III does not affect cell viability. A simple new purification method for protease III is described.     

Cell surface protease PRT1 identified in the fungal pathogen Pneumocystis carinii

The subtelomeric regions of the chromosomes of many organisms contain gene families that allow adaptation to a changing environment. In a number of parasites, these subtelomeric gene families encode cell surface proteins that undergo antigenic variation. Proteases are another important virulence determinant in pathogenic microorganisms. We report the localization of the PRT1 protease of the pathogenic fungus Pneumocystis carinii sp. f. carinii, encoded by a subtelomeric gene family, to the cell surface of both the trophozoite and the cyst phase of the organism. Using anti-PRT1 antiserum, we demonstrated specificity to P. carinii sp. f. carinii in sections of infected rat lungs and, using immunofluorescence, we showed that the PRT1 protease has the characteristic distribution of a surface protein. The anti-PRT1 antiserum showed cross-reactivity with a number of P. carinii sp. f. carinii proteins migrating between 185 kDa and 28 kDa, the majority migrating between 42 kDa and 52 kDa, a region that has been shown by serological studies to contain important immunodominant P. carinii proteins. Cross-reactivity was also observed with P. carinii sp. f. hominis proteins. We have also cloned a portion of the catalytic domain of PRT1 from P. carinii sp. f. hominis, P. carinii sp. f. muris and P. carinii sp. f. rattus. Our data suggest that the PRT1 protease plays an important role in the pathogenicity of P. carinii.     

Molecular cloning,nucleotide sequence and expression of the structural gene for a thermostable alkaline protease from Bacillus sp. no. AH-101

Summary Alkaliphilic Bacillus sp. no. AH-101 produces an extremely thermostable alkaline serine protease that has a high optimum pH (pH 12–13) and shows keratinolytic activity. The gene encoding this protease was cloned in Escherichia coli and expressed in B. subtilis. The cloned protease was identical to the AH-101 protease in its optimum pH and thermostability at high alkaline pH. An open reading frame of 1083 bases, identified as the protease gene, was preceded by a putative Shine-Dalgarno sequence (AAAGGAGG) with a spacing of 11 bases. The deduced amino acid sequence revealed a pre-pro-peptide of 93 residues followed by the mature protease comprising 268 residues. AH-101 protease showed slightly higher homology to alkaline proteases from alkaliphilic bacilli (61.2% and 65.3%) than to those from neutrophilic bacilli (54.9–56.7%). Also AH-101 protease and other proteases from alkaliphilic bacilli shared common amino acid changes and a four amino acid deletion when compared to the proteases from neutrophilic bacilli. AH-101 protease, however, was distinct among the proteases from alkaliphilic bacilli in showing the lowest homology to the others.Correspondence to: H. Takami     

Electron microscopy can be used to measure DNA supertwisting

Incorporation of starch or casein into protoplast-regeneration medium facilitated shotgun cloning of -amylase and neutral protease genes from an unidentified Bacillus sp. in Bacillus subtilis by polyethylene glycol-induced protoplast transformation. This modification and the use of the plasmid vector pPL603b enabled us to simultaneously select for promoter-bearing recombinant plasmids that expressed amylase or protease activity. The inserts were found to be 4 and 4.6 kb, respectively. Although protease activity directed by the cloned gene was only 2- to 4-fold higher than for the donor strain, that of -amylase was 28-fold higher.