Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

Cloning of replication, incompatibility, and stability functions of R plasmid NR1.

The region of R plasmid NR1 that is capable of mediating autonomous replication was cloned by using EcoRI, SalI, and PstI restriction endonucleases. The only EcoRI fragment capable of mediating autonomous replication in either a pol+ or a polA host was fragment B. SalI fragment E joined in native orientation with the part of SalI fragment C that overlapped with EcoRI fragment B, and also two contiguous PstI fragments of sizes 1.6 and 1.1 kilobases from EcoRI fragment B-mediated autonomous replication. When these individual SalI fragments were cloned onto plasmid pBR313 or the individual PstI fragments were cloned onto plasmid pBR322, none of these single fragments could rescue the replication of the ColE1-like vectors in a polA host, even in the presence of a compatible "helper" plasmid derived from a copy mutant of NR1. In contrast to the results reported for closely related R plasmid R6, EcoRI fragment A of NR1 could not rescue the replication of ColE1 derivative RSF2124 in a polA(Am) mutant or in a polA(Ts) mutant at the restrictive temperature. Although capable of autonomous replication, EcoRI fragment B of NR1 (or smaller replicator fragments cloned from it by using other restriction enzymes) was not stably inherited in the absence of selection for the recombinant plasmid. When EcoRI fragment B was ligated to EcoRI fragment A of NR1, the recombinant plasmid was stable. Thus, EcoRI fragment A contained a stability (stb) function. The stb function did not act in trans since EcoRI fragment B was not stably inherited when a ColE1 derivative (RSF2124) ligated to EcoRI fragment A was present in the same cell. A cointegrate plasmid consisting of EcoRI fragment B of NR1 ligated to RSF2124 was also not stably inherited, whereas only EcoRI fragment B was unstable when both RSF2124 and EcoRI fragment B coexisted as autonomous plasmids in the same cell. The incompatibility gene of NR1 was shown to be located within the region of overlap between SalI fragment E and the PstI 1.1-kilobase fragment. A copy mutant of NR1 (called pRR12) was found to have greatly reduced incompatibility with NR1; this Inc- phenotype is cis dominant.     

Structural and functional analysis of cloned DNA segments containing the replication and incompatibility regions of a miniplasmid derived from a copy number mutant of NR1.

A 1.45-megadalton segment of DNA cloned from a miniplasmid derived in vivo from a copy number mutant of the R plasmid NR1 has been shown to contain all functions essential for incompatibility and autonomous plasmid replication in Escherichia coli. Specific endonuclease cleavage sites within this DNA segment that localize functions required for replication have been mapped. A 0.45-megadalton fragment that specifies the FII incompatibility of NR1 has been identified within the replication region, and DNA fragments containing this incompatibility region, but lacking other functions required for replication, have been cloned.     

Role of RepA and DnaA proteins in the opening of the origin of DNA replication of an IncB plasmid

The replication initiator protein RepA of the IncB plasmid pMU720 was shown to induce localized unwinding of its cognate origin of replication in vitro. DnaA, the initiator protein of Escherichia coli, was unable to induce localized unwinding of this origin of replication on its own but enhanced the opening generated by RepA. The opened region lies immediately downstream of the last of the three binding sites for RepA (RepA boxes) and covers one turn of DNA helix. A 6-mer sequence, 5'-TCTTAA-3', which lies within the opened region, was essential for the localized unwinding of the origin in vitro and origin activity in vivo. In addition, efficient unwinding of the origin of replication of pMU720 in vitro required the native positioning of the binding sites for the initiator proteins. Interestingly, binding of RepA to RepA box 1, which is essential for origin activity, was not required for the localized opening of the origin in vitro.     

Characterization of the gene products produced in minicells by pSM1, a derivative of R100

Summary At least ten polypeptides larger than 6 kilodaltons (K) are produced in minicells from the miniplasmid pSM1 in vivo. pSM1 (5804 bp) is a small derivative of the drug resistance plasmid R100 (ca. 90 kb) and carries the R100 essential replication region as well as some non-essential functions. Cloned restriction fragments of pSM1 and plasmids with deletions within pSM1 sequences were used to assign eight of the ten oberserved polypeptides to specific coding regions of pSM1. Two of these polypeptides were identified as RepA1 and RepA2, proteins encoded by the essential replication region of pSM1/R100. The nucleotide sequence consisting of 885 bp outside the essential replication region is presented here. This sequence contains an open reading frame,orf4, for a protein 22.9 K in size, and one of the pSM1-encoded polypeptides was identified as theorf4 gene product. Five additional polypeptides were shown to be the products of other open reading frames mapping outside the essential replication region. Specific functions have been assigned to four of these polypeptides and tentatively to the fifth.     

Genes and sites involved in replication and incompatibility of an R100 plasmid derivative based on nucleotide sequence analysis

Summary The nucleotide sequence of the entire region required for autonomous replication and incompatibility of an R100 plasmid derivative, pSM1, has been determined. This region includes the replication region and all plasmid encoded information required for replication. Numerous reading frames for possible proteins can be found in this region. The existence of one of these proteins called RepA1 (285 amino acids; 33,000 daltons) which is encoded within the region known by cloning analysis to be required for replication is supported by several lines of evidence. These include an examination of the characteristic sequences on the proximal and distal ends of the coding region, a comparison of the sequence of the replication regions of pSM1 and the highly related R1 plasmid derivative Rsc13 as well as other biochemical and genetic evidence. The existence of two other proteins, RepA3 (64 amino acids; 7000 daltons) and RepA2 (103 amino acids; 11,400 daltons) is also consistent with most of the criteria mentioned above. However, the region encoding RepA3, which by cloning analysis is within the region responsible for both replication and incompatibility, has never been demonstrated to produce a 7,000 dalton polypeptide. Since a large secondary structure can be constructed in this region, it is possible that the region contains structure or other information that is responsible for incompatibility. RepA2, encoded entirely within the region identified by cloning analysis to be responsible for incompatibility but not for replication can be visualized in vivo and in vitro. However, the nucleotide sequence of the region encoding RepA2 is completely different in mutually incompatible plasmid derivatives of R1 and R100. It is therefore unlikely that RepA2 plays a major role in incompatibility. Thus, we predict that RepA1 is required to initiate DNA synthesis at the replication origin and that the region proximal to RepA1 either encodes a gene product or structure information that is responsible for incompatibility.     

The involvement of host replication proteins and of specific origin sequences in the in vitro replication of miniplasmid R1 DNA.

The in vitro replication of R1 miniplasmid promoted by purified preparations of the plasmid encoded RepA protein in cell extracts of E. coli is resistant to rifampicin and can be completely inhibited by antibodies against DnaG, the primase of the cell, as well as by antibodies against proteins DnaB and SSB. R1 replication is abolished in extracts deficient in the DnaA protein. This deficiency is efficiently complemented by purified preparations of the DnaA protein. The in vitro replication of plasmid R1 is also abolished in DnaC deficient extracts and by a 10 bp deletion (nucleotides 1463-1472) within the minimal origin region. These data indicate the requirement of the DnaA, DnaB, DnaC, DnaG and SSB replication proteins of the host, as well as of specific oriR1 sequences for the RepA dependent replication of plasmid R1. The implications of these results for the initiation of R1 replication are discussed.     

Interaction of initiator proteins with the origin of replication of an IncL/M plasmid

The origin of replication of the IncL/M plasmid pMU604 was analyzed to identify sequences important for binding of initiator proteins and origin activity. A thrice repeated sequence motif 5'-NANCYGCAA-3' was identified as the binding site (RepA box) of the initiator protein, RepA. All three copies of the RepA box were required for in vivo activity and binding of RepA to these boxes appeared to be cooperative. A DnaA R box (box 1), located immediately upstream of the RepA boxes, was not required for recruitment of DnaA during initiation of replication by RepA of pMU604 unless a DnaA R box located at the distal end of the origin (box 3) had been inactivated. However, DnaA R box 1 was important for recruitment of DnaA to the origin of replication of pMU604 when the initiator RepA was that from a distantly related plasmid, pMU720. A mutation which scrambled DnaA R boxes 1 and 3 and one which scrambled DnaA R boxes 1, 3 and 4 had much more deleterious effects on initiation by RepA of pMU720 than on initiation by RepA of pMU604. Neither Rep protein could initiate replication from the origin of pMU604 in the absence of DnaA, suggesting that the difference between them might lie in the mechanism of recruitment of DnaA to this origin. DnaA protein enhanced the binding and origin unwinding activities of RepA of pMU604, but appeared unable to bind to a linear DNA fragment bearing the origin of replication of pMU604 in the absence of other proteins.     

Plasmid replication functions

Summary Replicating DNA molecules of the mini R6-5 plasmid, pKTO71, were purified by equilibrium centrifugation in two successive ethidium bromide-caesium chloride gradients, converted to linear forms by cleavage with either HindIII or BglII restriction endonuclease, and examined in the electron microscope. Determination of the replication fork positions in 65 replicating molecules demonstrated that replication is initiated at a unique location on the plasmid and that it proceeds uni-directionally from this site. The direction of replication is such that the origin-proximal BglII cleavage site is replicated late or, in the case of the parent R6-5 plasmid, is such that the R-determinant region of the molecule is replicated early. The origin of replication, located by these experiments at R6-5 coordinate 98.6 kb, is clearly distinct from that of the R6-5 incompatibility determinant which has been shown to be located on an adjacent PstI-generated DNA fragment whose termini have R6-5 coordinates 96.8 and 97.9 kb. This result indicates that the incompatibility function is not an origin DNA sequence.     

Analysis of pCU1 replication origins: dependence of oriS on the plasmid-encoded replication initiation protein RepA

The broad-host-range replicon of the plasmid pCU1 has three origins of vegetative replication called oriB, oriS, and oriV. In the multi-origin replicon, individual origins can distinguish among replication factors provided by the host. It has been found that during replication in Escherichia coli polA(-) host, oriS was the only active origin of a mutant pCU1 derivative bearing a mutation in the gene encoding replication initiation protein RepA. To further investigate the capacity of oriS to function in an E. coli polA(-) host we constructed a number of clones of the basic replicon of pCU1 containing oriS as the only replication origin. An oriS construct created with pUC18 could transform the polA(-) strain when RepA was supplied in trans. When the oriS region (between nucleotides 290 and 832) was ligated to an antibiotic resistance Omega fragment, the construct could be recovered as a plasmid from polA(+) strain if functional RepA was provided in trans. Our results therefore indicate that the basic replicon of pCU1, containing oriS as the sole origin, does require RepA to initiate plasmid replication in E. coli     

Restriction endonuclease mapping and mutagenesis of the F sex factor replication region.

The plasmids pSC138 and pML31 each contain the EcoRI-generated f5 replicator fragment of the conjugative plasmid F in addition to an EcoRI fragment encoding antibiotic resistance: ampicillin resistance derived from Staphylococcus aureus in pSC138 and kanamycin resistance from Escherichia coli in pML31. We have mapped one HindIII and two BamHI restriction sites in the f5 region of these plasmids and one HindIII site in the antibiotic resistance region of each plasmid. The HindIII site in the Km region of pML31 occurs in the kan gene whereas the HindIII site in the Ap region of pSC138 appears to occur in an area important for the regulation of beta-lactamase production. By means of in vitro recombinant DNA manipulation of plasmids pML31 and pSC138, we have shown that approximately 1.9 X 10(6) daltons of the 6.0 X 10(6) dalton f5 fragment can be deleted without disrupting plasmid stability. In addition, we have used these same techniques to isolate a novel F-controlled Ap plasmid cloning vehicle which contains a single restriction site for each of the enzymes EcoRI, HindIII, and BamHI. This cloning vehicle has been linked via either its EcoRI or HindIII site to a ColE1 plasmid replicon to yield stable recombinants.     

Two replication determinants of an antibiotic-resistance plasmid, pTB19, from a thermophilic bacillus

Two different replication determinants were found on an antibiotic resistance plasmid, pTB19, from a thermophilic bacillus. One replication determinant (designated RepA) was functional only in Bacillus subtilis, whereas the other (designated RepB) functioned in both B. subtilis and Bacillus stearothermophilus. A deletion plasmid, pTB90, carrying the RepB derived from pTB19 coincidentally contained the specific 1.0 MDal EcoRI fragment of a cryptic plasmid pBSO2 from B. stearothermophilus. The presence of this 1.0 MDal EcoRI fragment in various deletion plasmids from pTB90 increased transformation frequencies for B. stearothermophilus 10(3) to 10(4) times and lowered plasmid copy numbers in the host strain to about one-tenth of those found for plasmids lacking this fragment.     

Unidirectional replication of plasmid R100

We isolated a 284 base-pair BamHI fragment of plasmid R100 that supports initiation of replication of a plasmid regardless of the orientation of the fragment. Analysis of the specific radioactivity of restriction fragments from 32P-labeled replication intermediates synthesized in vitro shows that replication of the plasmid carrying the 284 base-pair fragment is unidirectional. The direction of replication depends on the orientation of the fragment present in the plasmid. The 5' ends of the leading-strand DNA formed in the early stage of replication were mapped to a region downstream from the 284 base-pair fragment in the direction of replication. The lagging-strand DNA products were also identified and their 3' ends mapped to unique sites within the 284 base-pair fragment causing unidirectional replication of R100.