Substrate specificity of the Escherichia coli outer membrane protease OmpT

OmpT is a surface protease of gram-negative bacteria that has been shown to cleave antimicrobial peptides, activate human plasminogen, and degrade some recombinant heterologous proteins. We have analyzed the substrate specificity of OmpT by two complementary substrate filamentous phage display methods: (i) in situ cleavage of phage that display protease-susceptible peptides by Escherichia coli expressing OmpT and (ii) in vitro cleavage of phage-displayed peptides using purified enzyme. Consistent with previous reports, OmpT was found to exhibit a virtual requirement for Arg in the P1 position and a slightly less stringent preference for this residue in the P1' position (P1 and P1' are the residues immediately prior to and following the scissile bond). Lys, Gly, and Val were also found in the P1' position. The most common residues in the P2' position were Val or Ala, and the P3 and P4 positions exhibited a preference for Trp or Arg. Synthetic peptides based upon sequences selected by bacteriophage display were cleaved very efficiently, with kcat/Km values up to 7.3 x 10(6) M(-1) s(-1). In contrast, a peptide corresponding to the cleavage site of human plasminogen was hydrolyzed with a kcat/Km almost 10(6)-fold lower. Overall, the results presented in this work indicate that in addition to the P1 and P1' positions, additional amino acids within a six-residue window (between P4 and P2') contribute to the binding of substrate polypeptides to the OmpT binding site.     

Substrate specificity and screening of the integral membrane protease Pla

This paper reports a study to find small peptide substrates for the important virulence factor of Yersinia pestis, plasminogen activator, Pla. The method used to find small substrates for this protease is reported along with studies examining the ability of these peptides to inhibit activity of the enzyme. Through the use of parallel synthesis and positional scanning, small tripeptides were identified that are viable substrates for the protease.     

Substrate specificity of the DnaK chaperone determined by screening cellulose-bound peptide libraries.

Hsp70 chaperones assist protein folding by ATP-dependent association with linear peptide segments of a large variety of folding intermediates. The molecular basis for this ability to differentiate between native and non-native conformers was investigated for the DnaK homolog of Escherichia coli. We identified binding sites and the recognition motif in substrates by screening 4360 cellulose-bound peptides scanning the sequences of 37 biologically relevant proteins. DnaK binding sites in protein sequences occurred statistically every 36 residues. In the folded proteins these sites are mostly buried and in the majority found in beta-sheet elements. The binding motif consists of a hydrophobic core of four to five residues enriched particularly in Leu, but also in Ile, Val, Phe and Tyr, and two flanking regions enriched in basic residues. Acidic residues are excluded from the core and disfavored in flanking regions. The energetic contribution of all 20 amino acids for DnaK binding was determined. On the basis of these data an algorithm was established that predicts DnaK binding sites in protein sequences with high accuracy.     

Substrate specificity of the Escherichia coli outer membrane protease OmpP

Escherichia coli OmpP is an F episome-encoded outer membrane protease that exhibits 71% amino acid sequence identity with OmpT. These two enzymes cleave substrate polypeptides primarily between pairs of basic amino acids. We found that, like OmpT, purified OmpP is active only in the presence of lipopolysaccharide. With optimal peptide substrates, OmpP exhibits high catalytic efficiency (k(cat)/K(m) = 3.0 x 10(6) M(-1)s(-1)). Analysis of the extended amino acid specificity of OmpP by substrate phage revealed that both Arg and Lys are strongly preferred at the P1 and P1' sites of the enzyme. In addition, Thr, Arg, or Ala is preferred at P2; Leu, Ala, or Glu is preferred at P4; and Arg is preferred at P3'. Notable differences in OmpP and OmpT specificities include the greater ability of OmpP to accept Lys at the P1 or P1', site as well as the prominence of Ser at P3 in OmpP substrates. Likewise, the OmpP P1 site could better accommodate Ser; as a result, OmpP was able to cleave a peptide substrate between Ser-Arg about 120 times more efficiently than was OmpT. Interestingly, OmpP and OmpT cleave peptides with three consecutive Arg residues at different sites, a difference in specificity that might be important in the inactivation of cationic antimicrobial peptides. Accordingly, we show that the presence of an F' episome results in increased resistance to the antimicrobial peptide protamine both in ompT mutants and in wild-type E. coli cells.     

Substrate specificity at the P1' site of Escherichia coli OmpT under denaturing conditions

Though OmpT has been reported to mainly cleave the peptide bond between consecutive basic amino acids, we identified more precise substrate specificity by using a series of modified substrates, termed PRX fusion proteins, consisting of 184 residues. The cleavage site of the substrate PRR was Arg140-Arg141 and the modified substrates PRX substituted all 19 natural amino acids at the P1' site instead of Arg141. OmpT under denaturing conditions (in the presence of 4 M urea) cleaved not only between two consecutive basic amino acids but also at the carboxyl side of Arg140 except for the Arg140-Asp141, -Glu141, and -Pro141 pairs. In addition to Arg140 at the P1 site, similar results were obtained when Lys140 was substituted into the P1 site. In the absence of urea, an aspartic acid residue at the P1' site was unfavorable for OmpT cleavage of synthetic decapeptides, the enzyme showed a preference for a dibasic site.     

Substrate specificity of the streptococcal cysteine protease.

The streptococcal pyrogenic exotoxin B (SpeB) is an important factor in mediating Streptococcus pyogenes infections. SpeB is the zymogen of the streptococcal cysteine protease (SCP), of which relatively little is known regarding substrate specificity. To investigate this aspect of SCP function, a series of internally quenched fluorescent substrates was designed based on the cleavage sites identified in the autocatalytic processing of SpeB to mature SCP. The best substrates for SCP contain three amino acids in the nonprimed position (i.e. AIK in P(3)-P(2)-P(1)). Varying the length of the substrate on the primed side of the scissile bond has a relatively lower effect on activity. The highest activity (k(cat)/K(M) = 2.8 +/- 0.6 (10(5) x m(-1)s(-1)) is observed for the pentamer 3-aminobenzoic acid-AIKAG-3-nitrotyrosine, which spans subsites S(3) to S(2)' on the enzyme. High pressure liquid chromatography and mass spectrometry analyses show that the substrates are cleaved at the site predicted from the autoprocessing experiments. These results show that SCP can display an important level of endopeptidase activity. Substitutions at position P(2) of the substrate clearly indicate that the S(2) subsite of SCP can readily accommodate substrates containing a hydrophobic residue at that position and that some topological preference exists for that subsite. Substitutions in positions P(3), P(1), and P(1)' had little or no effect on SCP activity. The substrate specificity outlined in this work further supports the similarity between SCP and the cysteine proteases of the papain family. From the data regarding the identified or proposed natural substrates for SCP, it appears that this substrate specificity profile may also apply to the processing of mammalian and streptococcal protein targets by SCP.     

In vivo degradation of secreted fusion proteins by the Escherichia coli outer membrane protease OmpT.

The Escherichia coli outer membrane protease OmpT (protease VII) has been shown to degrade several proteins in vitro, but its function in vivo is uncertain. We demonstrate that OmpT participates in the degradation of a fusion protein secreted into the periplasmic space. A strain with mutations in degP (K.L. Strauch and J. Beckwith, Proc. Natl. Acad. Sci. USA 85:1576-1580, 1988) and ompT exhibits a cumulative decrease in protein degradation and should be useful for the expression of proteolytically sensitive secreted proteins.     

Substrate specificity of prostate-specific membrane antigen

A series of putative dipeptide substrates of prostate-specific membrane antigen (PSMA) was prepared that explored alpha- and beta/gamma-linked acidic residues at the P1 position and various chromophores at the P2 position, while keeping the P1' residue constant as L-Glu. Four chromophores were examined, including 4-phenylazobenzoyl, 1-pyrenebutyryl, 9-anthracenylcarboxyl-gamma-aminobutyryl, and 4-nitrophenylbutyryl. When evaluating these chromophores, it was found that a substrate containing 4-phenylazobenzoyl at the P2 position was consumed most efficiently. Substitution at the P1 position with acidic residues showed that only gamma-linked L-Glu and D-Glu were recognized by the enzyme, with the former being more readily proteolyzed. Lastly, binding modes of endogenous substrates and our best synthetic substrate (4-phenylazobenzoyl-Glu-gamma-Glu) were proposed by computational docking studies into an X-ray crystal structure of the PSMA extracellular domain.     

Investigation into the interaction of the bacterial protease OmpT with outer membrane lipids and biological activity of OmpT:lipopolysaccharide complexes

Outer-membrane proteases T (OmpT) are important defence molecules of Gram-negative bacteria such as Escherichia coli found in particular in clinical isolates. We studied the interaction of OmpT with the membrane-forming lipids phosphatidylethanolamine (PE) and phosphatidylglycerol (PG) from the inner leaflet and lipopolysaccharide (LPS) from the outer leaflet of the outer membrane. These investigations comprise functional aspects of the protein–lipid interaction mimicking the outer-membrane system as well as the bioactivity of LPS:OmpT complexes in the infected host after release from the bacterial surface. The molecular interaction of the lipids PE, PG, and LPS with OmpT was investigated by analysing molecular groups in the lipids originating from the apolar region (methylene groups), the interface region (ester), and the polar region (phosphates), and by analysing the acyl-chain melting-phase behaviour of the lipids. The activity of OmpT and LPS:OmpT complexes was investigated in biological test systems (human mononuclear cells and Limulus amoebocyte lysate assay) and with phospholipid model membranes. The results show a strong influence of OmpT on the mobility of the lipids leading to a considerable fluidization of the acyl chains of the phospholipids as well as LPS, and a rigidification of the phospholipid, but not LPS head groups. From this, a dominant role of the protein on the function of the outer membrane can be deduced. OmpT released from the outer membrane still contains slight contaminations of LPS, but its strong cytokine-inducing ability in mononuclear cells, which does not depend on the Toll-like receptors 2 and 4, indicates an LPS-independent mechanism of cell activation. This might be of general importance for infections induced by Gram-negative bacteria.     

Lipopolysaccharide regions involved in the activation of Escherichia coli outer membrane protease OmpT.

OmpT is an integral outer membrane protease of Escherichia coli. Overexpression of OmpT in E. coli and subsequent in vitro folding of the produced inclusion bodies yielded protein with a native-like structure. However, enzymatically active protease was only obtained after addition of the outer membrane lipid lipopolysaccharide (LPS). OmpT is the first example of an enzyme that requires LPS for activity. In this study, we investigated the nature of this activation. Circular dichroism analysis showed that binding of LPS did not lead to large structural changes. Titration of OmpT with LPS and determining the resulting OmpT activity with a fluorimetric assay yielded a dissociation constant of 10-4 m for E. coli K-12 LPS. Determining the dissociation constants for different LPS chemotypes revealed that a fully acylated lipid A part is minimally required for activation of OmpT. The heptose-bound phosphates in the inner core region were also important for activation. The affinity for LPS was not dependent on the concentration of substrate, neither was affinity for the substrate influenced by the concentration of LPS. This indicated that LPS most likely does not act at the level of substrate binding. We hypothesize that LPS induces a subtle conformational change in the protein that is required for obtaining a native active site geometry.     

Substrate specificity of human kallikreins 1 and 6 determined by phage display

The human tissue kallikrein (KLK) family contains 15 secreted serine proteases that are expressed in a wide range of tissues and have been implicated in different physiological functions and disease states. Of these, KLK1 has been shown to be involved in the regulation of multiple physiological processes such as blood pressure, smooth muscle contraction, and vascular cell growth. KLK6 is overexpressed in breast and ovarian cancer tissues and has been shown to cleave peptide derived from human myelin protein and Abeta amyloid peptide in vitro. Here we analyzed the substrate specificity of KLK1 and KLK6, by substrate phage display using a random octapeptide library. Consistent with earlier biochemical data, KLK1 was shown to exhibit both trypsin- and chymotrypsin-like selectivities with Tyr/Arg preferred at site P1, Ser/Arg strongly preferred at P1', and Phe/Leu at P2. KLK6 displayed trypsin-like activity, with the P1 position occupied only by Arg and a strong preference for Ser in P1'. Docking simulations of consensus peptide provide information on the identity of the enzyme residues that are responsible for substrate binding. Bioinformatic analysis suggested several putative KLK6 protein substrates, such as ionotropic glutamate receptor (GluR) and synphilin.     

Substrate specificity in HIV-1 protease by a biased sequence search method

Drug resistance in HIV-1 protease can also occasionally confer a change in the substrate specificity. Through the use of computational techniques, a relationship can be determined between the substrate sequence and three-dimensional structure of HIV-1 protease, and be utilized to predict substrate specificity. In this study, we introduce a biased sequence search threading (BSST) methodology to analyze the preferences of substrate positions and correlations between them that might also identify which positions within known substrates can likely tolerate sequence variability and which cannot. The potential sequence space was efficiently explored using a low-resolution knowledge-based scoring function. The low-energy substrate sequences generated by the biased search are correlated with the natural substrates. Octameric sequences were predicted using the probabilities of residue positions in the sequences generated by BSST in three ways: considering each position in the substrate independently, considering pairwise interdependency, and considering triple-wise interdependency. The prediction of octameric sequences using the triple-wise conditional probabilities produces the most accurate results, reproducing most of the sequences for five of the nine natural substrates and implying that there is a complex interdependence between the different substrate residue positions. This likely reflects that HIV-1 protease recognizes the overall shape of the substrate more than its specific sequence.     

Substrate specificity of peptide permeases in Candida albicans

Abstract Specificity of peptide transport systems in Candida albicans was studied using as an experimental tool novel anticandidal peptides, containing the N³-4-methoxyfumaroyl- l -2,3-diamino-propanoic acid residue. Studies on cross-resistance and on peptide uptake by spontaneous mutants resistant to toxic peptides, confirmed the multiplicity of peptide permeases in Candida albicans . At least two peptide permeases exist in this microorganism; the first one, specific for di- and tripeptides and the second, for oligopeptides containing 3–6 amino acids. The rate of the tritetra tetra-, penta- and hexapeptide transport in the mycelial form of Candida albicans is about 2-times higher than in the yeast form, while that of dipeptides is markedly reduced.
Tripeptides are proposed as the most efficient carriers for the delivery of 'warhead' amino acids into Candida albicans cells.     

Substrate specificity of the protease that processes human interleukin-1 beta

The substrate specificity of the protease which generates mature human interleukin-1 beta (IL-1 beta) from pro-interleukin-1 beta was investigated using synthetic peptide substrates and recombinant pro-IL-1 beta. The requirement of an L-aspartate in the P-1 position was confirmed together with the need for a small hydrophobic residue in the P-1' position (Gly or Ala). It was shown that the enzyme can tolerate conservative substitutions in the P-2 and P-2' positions. We found little difference in the enzyme's ability to cleave denatured and native pro-IL-1 beta, indicating that tertiary structure recognition is not involved in binding. The enzyme did, however, require a peptide of more than six amino acids for cleavage to occur. These results conclusively demonstrate the unusual specificity of this protease.     

Substrate specificity and protonation state of ornithine transcarbamoylase as determined by pH studies

The ornithine transcarbamoylase catalyzed reaction and its inhibition by L-norvaline have been investigated between pH 5.5 and 10.5. The steady-state turnover rate (kcat) of the enzyme from Escherichia coli increases with pH and plateaus above pH 9. Its change with pH conforms to a single protonation process with an apparent pKa of 7.3. The effect of pH on the apparent Michaelis constant (KMapp) of L-ornithine suggests that this diamino acid in its cationic form is not the substrate. Treating only the zwitterions of ornithine as substrate, the pH profile of the pseudo-first-order rate constant (kcat/KMz) of the reaction is a bell-shaped curve characterized by pKa's of 6.2 and 9.1 and asymptotic slopes of +/- 1. Similar pKa's (6.3 and 9.3) are obtained for the pKi profile of zwitterionic L-norvaline, a competitive inhibitor. The pKi profile further indicates that the alpha-amino group of the inhibitor must be charged for binding. Together, these pH profiles provide sufficient information to suggest that only the minor zwitterionic species of ornithine, H2N(CH2)3CH(NH3+)COO-, binds the enzyme productively. The selection of this substrate form by the enzyme leads to a Michaelis complex in which ornithine is poised for nucleophilic attack. Following such binding, the need for deprotonation of the delta-NH3+ group is avoided, and transcarbamoylation becomes energetically more feasible. Reaction schemes accounting for the effects of pH are proposed for the enzymic reaction.     

Structural basis for activation of an integral membrane protease by lipopolysaccharide

Omptins constitute a unique family of outer membrane proteases that are widespread in Enterobacteriaceae. The plasminogen activator (Pla) of Yersinia pestis is an omptin family member that is very important for development of both bubonic and pneumonic plague. The physiological function of Pla is to cleave (activate) human plasminogen to form the plasma protease plasmin. Uniquely, lipopolysaccharide (LPS) is essential for the catalytic activity of all omptins, including Pla. Why omptins require LPS for enzymatic activity is unknown. Here, we report the co-crystal structure of LPS-free Pla in complex with the activation loop peptide of human plasminogen, its natural substrate. The structure shows that in the absence of LPS, the peptide substrate binds deep within the active site groove and displaces the nucleophilic water molecule, providing an explanation for the dependence of omptins on LPS for enzymatic activity.     

Substrate specificity and inhibitory study of human airway trypsin-like protease

Human airway trypsin-like protease (HAT), also referred to as TMPRSS11D, is an important physiological enzyme with the main activity pronounced in an airway. In this work we have described the substrate specificity and selectivity study of the protease, performed by the combinatorial approach. Fluorogenic/chromogenic tetrapeptide library was used for this purpose. The most efficiently hydrolyzed substrates’ sequences that we selected were ABZ-Arg-Gln-Asp-Arg(Lys)-ANB-NH₂. The most active inhibitor with C-terminal Arg residue underwent detectable proteolysis action in the presence of 35 pM of HAT. Based on the selected sequences the two peptide aldehydes were synthesized and (Abz-Arg-Gln-Asp-Arg(Lys)-H) were found to be an effective HAT inhibitor, working in nanomolar range with inhibition constant 54 nM and 112 nM, respectively.     

Crystal structure of the outer membrane protease OmpT from Escherichia coli suggests a novel catalytic site

OmpT from Escherichia coli belongs to a family of highly homologous outer membrane proteases, known as omptins, which are implicated in the virulence of several pathogenic Gram-negative bacteria. Here we present the crystal structure of OmpT, which shows a 10-stranded antiparallel beta-barrel that protrudes far from the lipid bilayer into the extracellular space. We identified a putative binding site for lipopolysaccharide, a molecule that is essential for OmpT activity. The proteolytic site is located in a groove at the extracellular top of the vase-shaped beta-barrel. Based on the constellation of active site residues, we propose a novel proteolytic mechanism, involving a His-Asp dyad and an Asp-Asp couple that activate a putative nucleophilic water molecule. The active site is fully conserved within the omptin family. Therefore, the structure described here provides a sound basis for the design of drugs against omptin-mediated bacterial pathogenesis. Coordinates are in the Protein Data Bank (accession No. 1I78)     

Identification of essential acidic residues of outer membrane protease OmpT supports a novel active site

Escherichia coli outer membrane protease OmpT has previously been classified as a serine protease with Ser(99) and His(212) as active site residues. The recently solved X-ray structure of the enzyme was inconsistent with this classification, and the involvement of a nucleophilic water molecule was proposed. Here, we substituted all conserved aspartate and glutamate residues by alanines and measured the residual enzymatic activities of the variants. Our results support the involvement of a nucleophilic water molecule that is activated by the Asp(210)/His(212) catalytic dyad. Activity is also strongly dependent on Asp(83) and Asp(85). Both may function in binding of the water molecule and/or oxyanion stabilization. The proposed mechanism implies a novel proteolytic catalytic site.     

Defining SH2 domain and PTP specificity by screening combinatorial peptide libraries

Src homology 2 (SH2) domains mediate protein-protein interactions by recognizing short phosphotyrosyl (pY) peptide motifs in their partner proteins. Protein tyrosine phosphatases (PTPs) catalyze the dephosphorylation of pY proteins, counteracting the protein tyrosine kinases. Both types of proteins exhibit primary sequence specificity, which plays at least a partial role in dictating their physiological interacting partners or substrates. A combinatorial peptide library method has been developed to systematically assess the sequence specificity of SH2 domains and PTPs. A "one-bead-one-compound" pY peptide library is synthesized on 90-microm TentaGel beads and screened against an SH2 domain or PTP of interest for binding or catalysis. The beads that carry the tightest binding sequences against the SH2 domain or the most efficient substrates of the PTP are selected by an enzyme-linked assay and individually sequenced by a partial Edman degradation/mass spectrometry technique. The combinatorial method has been applied to determine the sequence specificity of 8 SH2 domains from Src and Csk kinases, adaptor protein Grb2, and phosphatases SHP-1, SHP-2, and SHIP1 and a prototypical PTP, PTP1B.