Pycnometric, viscometric and calorimetric studies of the process to release the double-stranded DNA from the Un bacteriophage

Knowledge of both the packaging of the linear, double-stranded (ds)DNA in bacteriophages and its subsequent release into the bacterial host is vital to our understanding of phage infection. There is now strong evidence that packaging requires a powerful rotary motor fuelled by ATP. From thermodynamic studies, however, it has been proposed that, at least for those viruses with a contractile tail, the dsDNA ejection from the phage head is a relatively simple physical process that does not require cellular energy and is facilitated by the difference in the conditions of the medium in the environments inside and outside the head. In this case, there should be no enthalpic effects associated with the dehiscence of the capsid and no destruction of it or the other structural elements of the phage. For the present study of temperature-induced phage dehiscence, we used a newly discovered phage with a contractile tail, named the Un (unknown) bacteriophage. Evidence is given of its characteristics in terms of ultrastructural morphology, serological parameters, host range and interaction with host cell. These show that, although it has similarities with the T-even phages and, in particular, the DDVI phage, it appears to be a new type. Earlier viscometric studies with it had shown that the temperature-induced release of the capsid dsDNA was completed at 70 degrees C. In the present investigation, a concentrated suspension of purified phage was subjected to pycnometric analysis through the temperature range of 30 to 70 degrees C. This showed that a significant and abrupt increase in the phage partial volume takes place, which remarkably is in the order of threefold. Viscometric measurements over time at 72 degrees C gave a kinetic curve from which evidence it was suggested that the temperature-induced DNA release is similar to a second order phase transition. At the same time, data from differential scanning calorimetry over the same temperature range showed no enthalpic effect. Our results indicate that the ejection of DNA from the capsid tail is driven by an entropy change.     

Roles of cell surface components of Escherichia coli K-12 in bacteriophage T4 infection: interaction of tail core with phospholipids.

The cell surface of Escherichia coli K-12, reconstituted from the OmpC protein, lipopolysaccharide, and the peptidoglycan layer, was active as a receptor for phage T4, resulting in the contraction of the tail sheath and the penetration of the core through the cell surface (Furukawa et al., J. Bacteriol. 140:1071--1080, 1979). In the present work the process of DNA ejection from the contracted T4 phage particle was studied. Contracted phage particles were adsorbed to phospholipid liposomes by the core tip. This adsorption resulted in ejection of phage DNA. Either phosphatidylglycerol or cardiolipin was active for the DNA ejection. A proton motive force across the liposome membrane was not required for these processes. The process of DNA ejection, however, was temperature dependent, whereas the adsorption of the core tip to liposomes took place at 4 degrees C. Based on these observations together with those in the previous paper, the process of T4 infection of E. coli K-12 cells is discussed with special reference to the roles of cell surface components.     

Pressure built by DNA packing inside virions: enough to drive DNA ejection in vitro, largely insufficient for delivery into the bacterial cytoplasm

Tailed bacteriophage particles carry DNA highly pressurized inside the capsid. Challenge with their receptor promotes release of viral DNA. We show that addition of the osmolyte polyethylene glycol (PEG) has two distinct effects in bacteriophage SPP1 DNA ejection. One effect is to inhibit the trigger for DNA ejection. The other effect is to exert an osmotic pressure that controls the extent of DNA released in phages that initiate ejection. We carried out independent measurements of each effect, which is an essential requirement for their quantitative study. The fraction of phages that do not eject increased linearly with the external osmotic pressure. In the remaining phage particles ejection stopped after a defined amount of DNA was reached inside the capsid. Direct measurement of the size of non-ejected DNA by gel electrophoresis at different PEG concentrations in the latter sub-population allowed determination of the external osmotic pressure that balances the force powering DNA exit (47 atm for SPP1 wild-type). DNA exit stops when the ejection force mainly due to repulsion between DNA strands inside the SPP1 capsid equalizes the force resisting DNA insertion into the PEG solution. Considering the turgor pressure in the Bacillus subtilis cytoplasm the energy stored in the tight phage DNA packing is only sufficient to power entry of the first 17% of the SPP1 chromosome into the cell, the remaining 83% requiring application of additional force for internalization.     

Conformational Changes Leading to T7 DNA Delivery upon Interaction with the Bacterial Receptor

The majority of bacteriophages protect their genetic material by packaging the nucleic acid in concentric layers to an almost crystalline concentration inside protein shells (capsid). This highly condensed genome also has to be efficiently injected into the host bacterium in a process named ejection. Most phages use a specialized complex (often a tail) to deliver the genome without disrupting cell integrity. Bacteriophage T7 belongs to the Podoviridae family and has a short, non-contractile tail formed by a tubular structure surrounded by fibers. Here we characterize the kinetics and structure of bacteriophage T7 DNA delivery process. We show that T7 recognizes lipopolysaccharides (LPS) from Escherichia coli rough strains through the fibers. Rough LPS acts as the main phage receptor and drives DNA ejection in vitro. The structural characterization of the phage tail after ejection using cryo-electron microscopy (cryo-EM) and single particle reconstruction methods revealed the major conformational changes needed for DNA delivery at low resolution. Interaction with the receptor causes fiber tilting and opening of the internal tail channel by untwisting the nozzle domain, allowing release of DNA and probably of the internal head proteins.     

Energy of cooperative transitions in bacteriophage SD

Heat denaturation of native phages SD suspensions, phage "shadows", and isolated phage DNA solutions were studied by scanning microcalorimetry and viscosimetry. Energetic parameters of cooperative transitions of protein fraction and DNA were measured. DNA melting was shown to be preceded by the destruction of capsid and protein denaturation. The melting curve of isolated DNA and DNA in the presence of protein component is characterized by a fine structure which is completely restored at repeated denaturation only in the presence of the protein component. "Creeping" of DNA out of the capsid in heated suspensions at 50-52 degrees C was shown to proceed with "zero" enthalpy without significant endo- and exo-thermal effects. No change of specific heat capacity of the suspension was also observed. It is emphasized that the mechanism of DNA going out of the capsid can be understood by studying DNA hydration inside the phage and its change in the course of liberation of the phage genome from the protein capsid.     

Characterization of the bacteriophage T3 DNA packaging reaction in vitro in a defined system

The bacteriophage T3 DNA packaging system in vitro defined here is composed of purified proheads and two non-capsid proteins, the products of genes 18 and 19 (gp18 and gp19). In this system, a precursor complex (50 S complex) accumulates in the presence of adenosine 5'-O-(3'-thiotriphosphate) (ATP-gamma-S), a non-hydrolyzable analog of ATP. The 50 S complex is converted to a filled head in the presence of ATP. The conversion of the 50 S complex, formed by preincubation with ATP-gamma-S, to the mature head proceeds in a synchronous manner after the addition of ATP. The lag time for formation of mature heads from the 50 S complex is 1.8, 4.5 and 6.8 minutes at 30, 25 and 20 degrees C, respectively. DNA is translocated into the capsid at a constant rate of 5.7 x 10(3) base-pairs per minute at 20 degrees C. The conversion of the 50 S complex to the mature head exhibits a sigmoidal relationship with respect to the concentration of ATP, the concentration for half-maximal activity being about 20 microM. The transition of the prohead to the expanded capsid occurs at 20 degrees C at one minute 40 seconds after the initiation of DNA translocation, when one-fourth of the genome has been packaged into a prohead. At the same time, the capsid-DNA complex becomes stable to high concentrations of salt. When DNA translocation is interrupted by the addition of ATP-gamma-S, packaged DNA exists at 0 degrees C as well as at 20 degrees C but the exit of DNA stops after one-third of the genome is inside the capsid. After exit, DNA is retranslocated into the expanded capsid by the addition of ATP at a rate of about 5.7 x 10(3) base-pairs per minute at 20 degrees C. The decrease in concentration of ATP interrupts DNA translocation into the capsid but does not induce DNA exit. Interrupted DNA translocation may be reinitiated by the addition of ATP. DNA exit is not induced by the addition of ATP-gamma-S to mature heads or partially filled heads pretreated with DNase.     

Is the In?Vitro Ejection of Bacteriophage DNA Quasistatic? A Bulk to Single Virus Study

Bacteriophage T5 DNA ejection is a complex process that occurs on several timescales in vitro. By using a combination of bulk and single phage measurements, we quantitatively study the three steps of the ejection—binding to the host receptor, channel-opening, and DNA release. Each step is separately addressed and its kinetics parameters evaluated. We reconstruct the bulk kinetics from the distribution of single phage events by following individual DNA molecules with unprecedented time resolution. We show that, at the single phage level, the ejection kinetics of the DNA happens by rapid transient bursts that are not correlated to any genome sequence defects. We speculate that these transient pauses are due to local phase transitions of the DNA inside the capsid. We predict that such pauses should be seen for other phages with similar DNA packing ratios.     

Uncoating the herpes simplex virus genome

Initiation of infection by herpes simplex virus (HSV-1) involves a step in which the parental virus capsid docks at a nuclear pore and injects its DNA into the nucleus. Once "uncoated" in this way, the virus DNA can be transcribed and replicated. In an effort to clarify the mechanism of DNA injection, we examined DNA release as it occurs in purified capsids incubated in vitro. DNA ejection was observed following two different treatments, trypsin digestion of capsids in solution, and heating of capsids after attachment to a solid surface. In both cases, electron microscopic analysis revealed that DNA was ejected as a single double helix with ejection occurring at one vertex presumed to be the portal. In the case of trypsin-treated capsids, DNA release was found to correlate with cleavage of a small proportion of the portal protein, UL6, suggesting that UL6 cleavage may be involved in making the capsid permissive for DNA ejection. In capsids bound to a solid surface, DNA ejection was observed only when capsids were warmed above 4 degrees C. The proportion of capsids releasing their DNA increased as a function of incubation temperature with nearly all capsids ejecting their DNA when incubation was at 37 degrees C. The results demonstrate heterogeneity among HSV-1 capsids with respect to their sensitivity to heat-induced DNA ejection. Such heterogeneity may indicate a similar heterogeneity in the ease with which capsids are able to deliver DNA to the infected cell nucleus.     

The ectodomain of the viral receptor YueB forms a fiber that triggers ejection of bacteriophage SPP1 DNA

The irreversible binding of bacteriophages to their receptor(s) in the host cell surface triggers release of the naked genome from the virion followed by transit of viral DNA to the host cell cytoplasm. We have purified, for the first time, a receptor from a Gram-positive bacterium that is active to trigger viral DNA ejection in vitro. This extracellular region ("ectodomain") of the Bacillus subtilis protein YueB (YueB780) was a 7 S elongated dimer forming a 36.5-nm-long fiber. YueB780 bound to the tail tip of bacteriophage SPP1. Although a stable receptor-phage interaction occurred between 0 and 37 degrees C, complete blocking of phage DNA release or partial ejection events were observed at temperatures below 15 degrees C. We also showed that the receptor was exposed to the B. subtilis surface. YueB differed structurally from phage receptors from Gram-negative bacteria. Its properties revealed a fiber spanning the full length of the 30-nm-thick peptidoglycan layer. The fiber is predicted to be anchored in the cell membrane through transmembrane segments. These features, highly suitable for a virus receptor in Gram-positive bacteria, are very likely shared by a large number of phage receptors.     

Real-time imaging of DNA ejection from single phage particles

Infection by tailed dsDNA phages is initiated by release of the viral DNA from the capsid and its polarized injection into the host. The driving force for the genome transport remains poorly defined. Among many hypothesis [1], it has been proposed that the internal pressure built up during packaging of the DNA in the capsid is responsible for its injection [2-4]. Whether the energy stored during packaging is sufficient to cause full DNA ejection or only to initiate the process was tested on phage T5 whose DNA (121,400 bp) can be released in vitro by mere interaction of the phage with its E. coli membrane receptor FhuA [5-7]. We present a fluorescence microscopy study investigating in real time the dynamics of DNA ejection from single T5 phages adsorbed onto a microfluidic cell. The ejected DNA was fluorescently stained, and its length was measured at different stages of the ejection after being stretched in a hydrodynamic flow. We conclude that DNA release is not an all-or-none process but occurs in a stepwise fashion and at a rate reaching 75,000 bp/sec. The relevance of this stepwise ejection to the in vivo DNA transfer is discussed.     

Bacteriophage T5 DNA ejection under pressure

The transfer of the bacteriophage genome from the capsid into the host cell is a key step of the infectious process. In bacteriophage T5, DNA ejection can be triggered in vitro by simple binding of the phage to its purified Escherichia coli receptor FhuA. Using electrophoresis and cryo-electron microscopy, we measure the extent of DNA ejection as a function of the external osmotic pressure. In the high pressure range (7-16 atm), the amount of DNA ejected decreases with increasing pressure, as theoretically predicted and observed for λ and SPP1 bacteriophages. In the low and moderate pressure range (2-7 atm), T5 exhibits an unexpected behavior. Instead of a unique ejected length, multiple populations coexist. Some phages eject their complete genome, whereas others stop at some nonrandom states that do not depend on the applied pressure. We show that contrarily to what is observed for the phages SPP1 and λ, T5 ejection cannot be explained as resulting from a simple pressure equilibrium between the inside and outside of the capsid. Kinetics parameters and/or structural characteristics of the ejection machinery could play a determinant role in T5 DNA ejection.     

Dynamics of DNA ejection from bacteriophage

The ejection of DNA from a bacterial virus (i.e., phage) into its host cell is a biologically important example of the translocation of a macromolecular chain along its length through a membrane. The simplest mechanism for this motion is diffusion, but in the case of phage ejection a significant driving force derives from the high degree of stress to which the DNA is subjected in the viral capsid. The translocation is further sped up by the ratcheting and entropic forces associated with proteins that bind to the viral DNA in the host cell cytoplasm. We formulate a generalized diffusion equation that includes these various pushing and pulling effects and make estimates of the corresponding speedups in the overall translocation process. Stress in the capsid is the dominant factor throughout early ejection, with the pull due to binding particles taking over at later stages. Confinement effects are also investigated, in the case where the phage injects its DNA into a volume comparable to the capsid size. Our results suggest a series of in vitro experiments involving the ejection of DNA into vesicles filled with varying amounts of binding proteins from phage whose state of stress is controlled by ambient salt conditions or by tuning genome length.     

Structure–Function Analysis of the DNA Translocating Portal of the Bacteriophage T4 Packaging Machine

Tailed bacteriophages and herpesviruses consist of a structurally well conserved dodecameric portal at a special 5-fold vertex of the capsid. The portal plays critical roles in head assembly, genome packaging, neck/tail attachment, and genome ejection. Although the structures of portals from phages φ29, SPP1, and P22 have been determined, their mechanistic roles have not been well understood. Structural analysis of phage T4 portal (gp20) has been hampered because of its unusual interaction with the Escherichia coli inner membrane. Here, we predict atomic models for the T4 portal monomer and dodecamer, and we fit the dodecamer into the cryo-electron microscopy density of the phage portal vertex. The core structure, like that from other phages, is cone shaped with the wider end containing the “wing” and “crown” domains inside the phage head. A long “stem” encloses a central channel, and a narrow “stalk” protrudes outside the capsid. A biochemical approach was developed to analyze portal function by incorporating plasmid-expressed portal protein into phage heads and determining the effect of mutations on head assembly, DNA translocation, and virion production. We found that the protruding loops of the stalk domain are involved in assembling the DNA packaging motor. A loop that connects the stalk to the channel might be required for communication between the motor and the portal. The “tunnel” loops that project into the channel are essential for sealing the packaged head. These studies established that the portal is required throughout the DNA packaging process, with different domains participating at different stages of genome packaging.     

DNA Heats Up: Energetics of Genome Ejection from Phage Revealed by Isothermal Titration Calorimetry

Most bacteriophages are known to inject their double-stranded DNA into bacteria upon receptor binding in an essentially spontaneous way. This downhill thermodynamic process from the intact virion to the empty viral capsid plus released DNA is made possible by the energy stored during active packaging of the genome into the capsid. Only indirect measurements of this energy have been available until now, using either single-molecule or osmotic suppression techniques. In this work, we describe for the first time the use of isothermal titration calorimetry to directly measure the heat released (or, equivalently, the enthalpy) during DNA ejection from phage λ, triggered in solution by a solubilized receptor. Quantitative analyses of the results lead to the identification of thermodynamic determinants associated with DNA ejection. The values obtained were found to be consistent with those previously predicted by analytical models and numerical simulations. Moreover, the results confirm the role of DNA hydration in the energetics of genome confinement in viral capsids.     

A theoretical model of DNA packaging in the phage head]

Statistical model of dsDNA packaging to icosahedral bacteriophage capsid is presented. The model describes intraphage DNA as a globule, i.e. intramolecular liquid crystal. We analyse the free energy of DNA, which has a globulized part inside the phage capsid and coil-like tail outside it. Conditions when processes of DNA movement into capsid or back are thermodynamically favorable are investigated. These processes are not accompanied with any thermal effects. It is not "all or none" type process, i.e. intermediate stable states are possible. The role of DNA interaction with the capsid inner wall is considered. The essential model abilities for qualitative explanation of experimental data are exhibited.     

Heat induced capsid disassembly and DNA release of bacteriophage λ

Successive structural changes of bacteriophage λ upon heating were characterized with quantitative experimental methods. In the commonly used Tris-Mg buffer, differential scanning calorimetry measurements first established that the protein capsid of λ phage melts at 87 °C and its genomic DNA melts at 91 °C. Interestingly, prior to the capsid melting, λDNA was found to escape out of the capsid and subject to DNase digestion above ~68 °C, as concluded from light scattering, UV absorption, and electron microscopy studies. Further investigations indicated distinct temperature-dependent behaviors of the three phage proteins. Around 68 °C, disruption of the tail first occurs and leads to the escape of λ DNA; above the capsid melting temperature of 87 °C, the auxiliary protein gpD of the phage head remains soluble in solution and resists centrifugal sedimentation, whereas the major capsid protein gpE is easily precipitated and likely exists as aggregates.     

Bacteriophage DNA reptation]

The kinetics of reptation process of dsDNA leaving the phage head is analysed theoretically. It is assumed that the process is caused by DNA free energy decrease when it is leaving the head (DNA has to be in a globular state) for its surroundings where it is transformed into a coil state. For the analysis we have used the results of previous paper on equilibrium theory of DNA intraphage globule. Three possible cases for the ejection process friction are considered: friction in the tail-part channel, that of DNA segments with each other in the whole globule volume (it is essential for the collective way of the globule decondensation with simultaneous movement of all the loops--the first type way), the globule friction with internal capsid surface (it is most essential for the decondensation by the way of the globule rotation as a whole "spool"--the second type way). The first way would correspond to the greatest ejection time. The known experimental data on distinguishing ejection kinetics for phages with short and long tail-parts allow us to formulate arguments in favor of realization of the second way in nature.     

Physiological Effects of Growth of an Escherichia coli Temperature-Sensitive dnaZ Mutant at Nonpermissive Temperatures

The physiological effects of incubation at nonpermissive temperatures of Escherichia coli mutants that carry a temperature-sensitive dnaZ allele [dnaZ(Ts)2016] were examined. The temperature at which the dnaZ(Ts) protein becomes inactivated in vivo was investigated by measurements of deoxyribonucleic acid (DNA) synthesis at temperatures intermediate between permissive and nonpermissive. DNA synthesis inhibition was reversible by reducing the temperature of cultures from 42 to 30 degrees C; DNA synthesis resumed immediately after temperature reduction and occurred even in the presence of chloramphenicol. Inasmuch as DNA synthesis could be resumed in the absence of protein synthesis, we concluded that the protein product of the dnaZ allele (Ts)2016 is renaturable. Cell division, also inhibited by 42 degrees C incubation, resumed after temperature reduction, but the length of time required for resumption depended on the duration of the period at 42 degrees C. Replicative synthesis of cellular DNA, examined in vitro in toluene-permeabilized cells, was temperature sensitive. Excision repair of ultraviolet light-induced DNA lesions was partially inhibited in dnaZ(Ts) cells at 42 degrees C. The dnaZ(+) product participated in the synthesis of both Okazaki piece (8-12S) and high-molecular-weight DNA. During incubation of dnaZ(Ts)(lambda) lysogens at 42 degrees C, prophage induction occurred, and progeny phage were produced during subsequent incubation at 30 degrees C. The temperature sensitivity of both DNA synthesis and cell division in the dnaZ(Ts)2016 mutant was suppressed by high concentrations of sucrose, lactose, or NaCl. Incubation at 42 degrees C was neither mutagenic nor antimutagenic for the dnaZ(Ts) mutant.     

Dynamics of double stranded DNA reptation from bacteriophage.

The dynamics of dsDNA release process from a phage head has been analyzed theoretically. The process was considered as dsDNA reptation through the phage tail. The driving force is assumed to be the decrease of the DNA globule free energy on its releasing from the head in the surrounding medium. The results of the equilibrium theory on an intraphage DNA globule were applied. Three possible sources of friction were examined. The first one is in the inner channel of the tail. The second is the friction of DNA segments in the whole globule volume, which is essential when the globule decondensation is a collective process, at simultaneous moving of all the turns (mechanism 1). The third is the globule friction with the capsid inner surface, that is most important when decondensation proceeds via the globule rotation as a whole spool (mechanism 2). Mechanism 1 would require a lot of time for ejection. Mechanism 2 would lead to different ejection dynamics of short- and long-tailed phages. Comparison of the theoretical results with the published experimental data argues in favor of mechanism 2.     

Effects of salt concentrations and bending energy on the extent of ejection of phage genomes

Recent work has shown that pressures inside dsDNA phage capsids can be as high as many tens of atmospheres; it is this pressure that is responsible for initiation of the delivery of phage genomes to host cells. The forces driving ejection of the genome have been shown to decrease monotonically as ejection proceeds, and hence to be strongly dependent on the genome length. Here we investigate the effects of ambient salts on the pressures inside phage-λ, for the cases of mono-, di-, and tetravalent cations, and measure how the extent of ejection against a fixed osmotic pressure (mimicking the bacterial cytoplasm) varies with cation concentration. We find, for example, that the ejection fraction is halved in 30 mM Mg²⁺ and is decreased by a factor of 10 upon addition of 1 mM spermine. These effects are calculated from a simple model of genome packaging, using DNA-DNA repulsion energies as determined independently from x-ray diffraction measurements on bulk DNA solutions. By comparing the measured ejection fractions with values implied from the bulk DNA solution data, we predict that the bending energy makes the d-spacings inside the capsid larger than those for bulk DNA at the same osmotic pressure.