Temporal evolution of the electron diffusion coefficient in electrolyte-filled mesoporous nanocrystalline TiO2 films

Electron transport in electrolyte-filled mesoporous TiO₂-based solar cells is described quantitatively from the perspective of the continuous-time random walk model. An analytical expression is derived for the time-dependent diffusion coefficient of electrons, which transforms at a characteristic (Fermi) time from strongly time-dependent values (dispersive transport) at short times to relatively time-independent values (nondispersive transport) at long times. At short times, the diffusion coefficient displays a power-law behavior with time. The timescale for the diffusion coefficient to reach its steady-state value is substantially longer than the Fermi time. The Fermi time and the steepness of the distribution of waiting times associated with trap sites have a strong influence on both the steady-state diffusion coefficient of electrons and on the dispersiveness of electron transport. At short timescales, ionic drag, associated with the ambipolar effect, slows electron transport through the TiO₂ matrix, whereas at steady state, transport is trap limited. Decreasing the electron density lowers the steady-state limit of the diffusion coefficient and increases the timescale over which transport is dispersive.     

A new ion-coordinating ruthenium sensitizer for mesoscopic dye-sensitized solar cells

A new ion-coordinating ruthenium polypyridyl sensitizer, NaRu(4-carboxylic acid-4′-carboxylate)(4,4′-bis[(triethyleneglycolmethylether) heptylether]-2,2′-bipyridine)(NCS)₂ (coded as K68), has been synthesized and characterized by ¹H NMR, FTIR, UV-Vis absorption and emission spectroscopy. A power conversion efficiency of 6.6% was obtained for dye-sensitized solar cells (DSCs) based on the K68 dye and a newly developed binary ionic liquid electrolyte containing 1-propyl-3-methyl-imidazolium iodide (PMII) and 1-ethyl-3-methyl-imidazolium tetracyanoborate (EMIB(CN)₄). For a non-volatile organic solvent based electrolyte, a photovoltaic power conversion efficiency of 7.7% was obtained under simulated full sun light and exhibited a good thermal stability during the accelerated test under 80 °C in the dark. Solid-state DSCs incorporating K68 also perform remarkably well, out-performing our previously best ruthenium complexes employed in this type of DSC.     

Photoinduced absorption spectroscopy as a tool in the study of dye-sensitized solar cells

Photoinduced absorption (PIA) spectroscopy, where the excitation is provided by a square-wave modulated (on/off) monochromatic light source, is a versatile tool in the study of dye-sensitized solar cells. Spectra of transient species, such as the oxidized dye, can easily be obtained and their kinetics can be explored using frequency or time-resolved techniques. Experimental PIA conditions can be kept close to typical solar cell operating conditions, allowing extraction of relevant time constants. PIA is also a suitable method to study the quality of pore filling in case of solid hole conductors. Dye molecules that are not in direct contact with the hole conductor will have long lifetimes in their oxidized state and appear clearly in the PIA spectrum. The basic principles of PIA are explained using the example of electron injection and recombination in dye-sensitized TiO₂ in the absence of redox electrolyte.     

Dye-sensitized photocurrents and adsorption properties of merocyanine dye at atomically flat rutile (1 1 0) and (1 0 0) TiO2 surfaces

The crystal-face dependence of the dye-sensitized photocurrents and the adsorption properties of benzothiazole merocyanine (Mc[18,1]) dye molecules were investigated, using atomically flat (1 0 0) and (1 1 0) TiO₂ single crystal surfaces. From the estimation of the amount of the transferred charge from the TiO₂ surface to CO groups of dye molecules based on NEXAFS data, it was revealed that the interaction of the adsorbed molecules and the (1 1 0) surface was much stronger than that for the (1 0 0) surface. On the other hand, the absorbed photon to current conversion efficiency (APCE) value was almost the same for both surfaces. We suggested a possible explanation as follows: the energy difference between the LUMO of Mc[18,1] and the conduction band of TiO₂ was large enough to give a nearly 100% quantum efficiency of electron transfer from photoexcited dye to TiO₂, which made the difference in the interaction between dye molecules and TiO₂ not apparent. The incident photon to current conversion efficiency (IPCE) for the (1 0 0) surface was much larger than that for the (1 1 0) surface, which was explained by the fact that the amount of the adsorbed dye molecules on the (1 0 0) surface was larger than on the (1 1 0) surface, probably due to the larger surface density of five-coordinated Ti sites in the former surface.     

Artificial photosynthesis based on dye-sensitized nanocrystalline TiO2 solar cells

A new series of amphiphilic heteroleptic ruthenium(II) sensitizers [Ru(H₂dcbpy)(dhbpy)(NCS)₂] (C1), [Ru(H₂dcbpy)(bccbpy)(NCS)₂] (C2), [Ru(H₂dcbpy)(mpubpy)(NCS)₂] (C3), [Ru(H₂dcbpy)(bhcbpy)(NCS)₂] (C4) have been synthesized and fully characterized by UV-Vis, emission, NMR and cyclic voltammetric studies (where dhbpy = 4,4′-dihexyl-2,2′-bipyridine, bccbpy = 4,4′-bis(cholesteroxycarbonyl)-2,2′-bipyridine, mpubpy = 4-methyl-4′-perfluoro-1H,1H,2H,2H,3H,3H-undecyl-2,2′-bipyridine, bhcbpy = 4,4′-Bis(hexylcarboxamido)-2,2′-bipyridine). The amphiphilic amide heteroleptic ruthenium(II) sensitizers, self-assembled on TiO₂ surface from ethanol solution, reveal efficient sensitization in the visible window range yielding ≈80% incident photon-to-current efficiencies (IPCE). Under standard AM 1.5 sunlight, the C4 sensitizer gave 15 mA/cm² short circuit photocurrent density, 0.66 fill factor and an open circuit voltage of 0.75 V, corresponding to an overall conversion efficiency of 7.4%.     

Hybrid Heterojunction and Solid‐State Photoelectrochemical Solar Cells

A hybrid heterojunction and solid‐state photoelectrochemical solar cell based on graphene woven fabrics (GWFs) and silicon is designed and fabricated. The GWFs are transferred onto n‐Si to form a Schottky junction with an embedded polyvinyl alcohol based solid electrolyte. In the hybrid solar cell, solid electrolyte serves three purposes simutaneously; it is an anti‐reflection layer, a chemical modification carrier, and a photoelectrochemical channel. The open‐circuit voltage, short‐circuit current density, and fill factor are all significantly improved, achieving an impressive power conversion efficiency of 11%. Solar cell models are constructed to confirm the hybrid working mechanism, with the heterojunction junction and photoelectrochemical effect functioning synergistically.     

Antibacterial performance of nanoscaled visible-light responsive platinum-containing titania photocatalyst in vitro and in vivo

Background

Traditional antibacterial photocatalysts are primarily induced by ultraviolet light to elicit antibacterial reactive oxygen species. New generation visible-light responsive photocatalysts were discovered, offering greater opportunity to use photocatalysts as disinfectants in our living environment. Recently, we found that visible-light responsive platinum-containing titania (TiO₂–Pt) exerted high performance antibacterial property against soil-borne pathogens even in soil highly contaminated water. However, its physical and photocatalytic properties, and the application in vivo have not been well-characterized.

Methods

Transmission electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, ultraviolet–visible absorption spectrum and the removal rate of nitrogen oxides were therefore analyzed. The antibacterial performance under in vitro and in vivo conditions was evaluated.

Results

The apparent quantum efficiency for visible light illuminated TiO₂–Pt is relatively higher than several other titania photocatalysts. The killing effect achieved approximately 2 log reductions of pathogenic bacteria in vitro. Illumination of injected TiO₂–Pt successfully ameliorated the subcutaneous infection in mice.

Conclusions

This is the first demonstration of in vivo antibacterial use of TiO₂–Pt nanoparticles. When compared to nanoparticles of some other visible-light responsive photocatalysts, TiO₂–Pt nanoparticles induced less adverse effects such as exacerbated platelet clearance and hepatic cytotoxicity in vivo.

General significance

These findings suggest that the TiO₂–Pt may have potential application on the development of an antibacterial material in both in vitro and in vivo settings.     

Molecular Design of Interfacial Modifiers for Polymer‐Inorganic Hybrid Solar Cells

The heterojunction of poly(3‐hexylthiophene) (P3HT) and TiO₂ in hybrid solar cells is systematically engineered with four cyanoacrylic acid‐containing conjugated molecules with various lowest unoccupied molecular orbital (LUMO) levels, WL‐1 to WL‐4, which are prepared by the formylation of thiophene derivatives in a Vilsmeier–Haack reaction, followed by treatment with cyanoacetic acid. The optical characteristics, redox properties, and intrinsic dipole moments of these interfacial modifiers (IMs) are examined using UV‐vis spectrophotometry, cyclic voltammetry, and density functional theory calculations. Using cyanoacrylic acid as a terminal anchoring group in IMs increases the electron affinity in regions close to the titania surface and forms a molecular dipole that is orientated away from the TiO₂ surface, enabling both open‐circuit voltage (V_OC) and short‐circuit current density to be increased simultaneously. Photovoltaic measurements demonstrate that V_OC increases with the dipole moment of IMs along the molecular backbone. Moreover, the external quantum efficiency (EQE) spectra display a bimodal distribution, revealing that both IMs and P3HT contribute to the photocurrent. The EQE at 570 nm is identified as characteristic of P3HT. More importantly, the LUMO of the IMs decisively determines the dissociation efficiency of P3HT excitons. The device based on P3HT/WL‐4/TiO₂ exhibits the highest power conversion efficiency of 2.87%.     

Deposition of iron titanate/titania ceramic composite thin films from a single molecular precursor

A heterobimetallic single molecular precursor, [Fe₂Ti₄(μ-O)₆(TFA)₈(THF)₆] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized by the simple reaction of [Fe₃O(OAc)₆(H₂O)₃]NO₃·4H₂O [OAc = acetato] with tetrakis(2-ethoxyethanalato)titanium(IV) in the presence of trifluoroacetic acid in THF. The synthesized precursor was analyzed by melting point, CHN analysis, FTIR, single crystal X-ray diffraction and thermogravimetric analysis. Complex (1) crystallizes in the orthorhombic space group Pca2₁ with cell dimensions a = 19.2114(14), b = 20.4804(15) and c = 17.2504(12) Å, and the complex undergoes thermal decomposition at 490 °C to give a residual mass corresponding to an Fe₂TiO₅-TiO₂ composite mixture. The synthesized precursor was utilized for deposition of Fe₂TiO₅-TiO₂ composite thin films by aerosol-assisted chemical vapor deposition (AACVD) on glass substrates at 500 °C using argon as the carrier gas. Scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray powder diffraction (XRD) analyses of the thin films suggest the formation of good quality crystalline thin films of an Fe₂TiO₅-TiO₂ composite with an average grain size of 0.105-0.120 μm.     

Inorganic and organic UV filters: Their role and efficacy in sunscreens and suncare products

Minerals such as titanium dioxide, TiO₂, and zinc oxide, ZnO, are well known active semiconductor photocatalysts used extensively in heterogeneous photocatalysis to destroy environmental pollutants that are organic in nature. They are also extensively used in sunscreen lotions as active broadband sunscreens that screen both UVB (290-320 nm) and UVA (320-400 nm) sunlight radiation and as high SPF makers. When so photoactivated by UV light, however, these two particular metal oxides are known to generate highly oxidizing radicals (OH and ) and other reactive oxygen species (ROS) such as H₂O₂ and singlet oxygen, ¹O₂, which are known to be cytotoxic and/or genotoxic. Hydroxyl (OH) radicals photogenerated from photoactive TiO₂ specimens extracted from commercial sunscreen lotions [R. Dunford, A. Salinaro, L. Cai, N. Serpone, S. Horikoshi, H. Hidaka, J. Knowland, FEBS Lett. 418 (1997) 87] induce damage to DNA plasmids in vitro and to whole human skin cells in cultures. Accordingly, the titanium dioxide particle surface was modified to produce TiO₂ specimens of considerably reduced photoactivity. Deactivation of TiO₂ diminishes considerably, in some cases completely suppresses damage caused to DNA plasmids, to human cells, and to yeast cells compared to non-modified specimens exposed to UVB/UVA simulated solar radiation. The photostabilities of sunscreen organic active agents in neat polar and apolar solvents and in actual commercial formulations have been examined [N. Serpone, A. Salinaro, A.V. Emeline, S. Horikoshi, H. Hidaka, J. Zhao, Photochem. Photobiol. Sci. 1 (2002) 970]. With rare exceptions, the active ingredients undergo photochemical changes (in some cases form free radicals) and the sunscreen lotions lose considerable Sun protection efficacy only after a relatively short time when exposed to simulated sunlight UVB/UVA radiation, confirming the recent findings by Sayre et al. [R.M. Sayre, J.C. Dowdy, A.J. Gerwig, W.J. Shields, R.V. Lloyd, Photochem. Photobiol. 81 (2005) 452].     

Electrogenerated chemiluminescence of novel TiO2/CdS nanocomposites for sensitive assays of cancer cells

A novel TiO₂/CdS nanocomposite was prepared and used to fabricate an electrochemiluminescence (ECL) biosensor for the detection of cancer cells for the first time. The nanocomposite exhibited a strong cathodic ECL signal. Folic acid for targeting cell membranes was bound to a TiO₂/CdS/3-aminopropyltriethoxysilane film, and specific recognition of folic acid to targeting cells was achieved, leading to a significant decrease in ECL intensity. The decrease in ECL signal was logarithmically related to the cell concentration in the range of 150–9600 cells mL^-1. The ECL biosensor could provide a sensitive, selective, and convenient approach for early and accurate detection of cancer cells.     

Photocatalytic disinfection of Giardia intestinalis and Acanthamoeba castellani cysts in water

In this study, disinfection of water containing Giardia intestinalis and Acanthamoeba castellani cysts with TiO2 and modified catalyst silver loaded TiO2 (Ag-TiO2) was investigated. Destruction of the parasites was evaluated after UV illumination of the suspension consisting 5 x 10(8)-13.5 x 10(8)cysts/mL in the presence of 2g/L neat or modified TiO2 at neutral pH. In the initial stage, the solid photocatalyst particles penetrated the cyst wall and then oxidant species produced by TiO2/UV destroyed both cell wall and intracellular structure. In the case of G. intestinalis inactivation (disinfection) performance of TiO2/UV system reached 52.5% only after 25 min illumination and total parasite disinfection was achieved after 30 min illumination. However, silver loaded TiO2 seemed to be more effective as this loading provided better catalytic action as well as additional antimicrobial properties. Cell viability tests showed that parasite cysts, their walls in particular, were irreversibly damaged and cysts did not re-grow. Nevertheless the studied system seemed to be ineffective for the inactivation of A. castellani. Inactivation percentages of TiO2/UV and Ag-TiO2/UV systems were far lower than that of UV alone, being 50.1% and 46.1%, respectively.     

Glucose reactions with acid and base catalysts in hot compressed water at 473 K

The effects of the homogeneous catalysts (H(2)SO(4) and NaOH) and heterogeneous catalysts (TiO(2) and ZrO(2)) on glucose reactions were examined in hot compressed water (473 K) by a batch-type reactor. From the homogeneous catalyst studies, we confirmed that the acid catalyst promoted dehydration, while isomerization of glucose to fructose was catalyzed by alkali. Anatase TiO(2) was found to act as an acid catalyst to promote formation of 5-hydroxymethylfuraldehyde (HMF). Zirconia (ZrO(2)) was a base catalyst to promote the isomerization of glucose. The effects of the additives were also confirmed through fructose reactions.     

7beta-hydroxy-epiandrosterone modulation of 15-deoxy-delta12,14-prostaglandin J2, prostaglandin D2 and prostaglandin E2 production from human mononuclear cells

7β-hydroxy-epiandrosterone (7β-OH-EPIA) has been shown to be cytoprotective in various organs including the brain. It has also been shown that prostaglandin D₂ (PGD₂) and its spontaneous metabolite 15-deoxy-Δ^12,14-prostaglandin J₂ (15d-PGJ₂) are also cytoprotective. It is possible that these prostaglandins derived from circulating mononuclear cells may mediate the actions of 7β-OH-EPIA. The aim of this study, therefore, was to ascertain the effect of 7β-OH-EPIA (in the absence or presence of tumour necrosis factor-α (TNF-α)), a pro-inflammatory stimulus, on the biosynthesis of PGD₂, PGE₂ and 15d-PGJ₂ from human mononuclear cells. Prostaglandins were measured by enzyme immunoassay (EIA). 7β-OH-EPIA alone induced a concentration-dependant increase in the production of PGD₂. TNF-α increased PGD₂ levels which were enhanced by 7β-OH-EPIA. 7β-OH-EPIA increased 15d-PGJ₂ levels both in the absence and presence of TNF-α. 7β-OH-EPIA alone had no effect on PGE₂ biosynthesis but suppressed TNF-α-induced PGE₂ circa 50%. 7β-OH-EPIA also increased the level of free arachidonic acid and radiolabelled prostaglandins in cells pre-incubated with radiolabelled arachidonic acid, indicating that the increase may occur via the enhanced release of substrate arachidonic acid. 7β-OH-EPIA did not affect levels of the anti-inflammatory cytokine IL-10 indicating that this is an unlikely mechanism by which 7β-OH-EPIA induces its actions but more likely exerts its effects via the production of cytoprotective prostaglandins.     

Key aspects of individual layers in solid-state dye-sensitized solar cells and novel concepts to improve their performance

In this feature article, we discuss the key aspects of solid-state dye-sensitized solar cells (SDSC) and propose different concepts based on extensive studies carried out in our group to improve their performance. The influence of compact TiO₂ layer, novel donor-antenna sensitizing dyes, nature of nanocrystalline-TiO₂ layers and solid-state organic hole conductors on the performance of SDSC is discussed in this article. Both preparation and thickness of the compact TiO₂ layer were optimized using spray pyrolysis. The studies revealed that an optimum film thickness of 120-150 nm of compact TiO₂ yielded the best rectifying behavior and SDSC performance. The influence of three different mesoporous titania films, obtained from three different titania nanocrystals, prepared by sol-gel, thermal, and colloidal-microwave process, was also studied and discussed here. The TiO₂ layer with the optimum pore volume and pore diameter (∼44 nm) displayed the highest efficiency and IPCE in SDSC. The importance of pore size rather than high surface area for filling the mesoporous layer with solid-state hole conductor became evident from this study. A series of heteroleptic Ru(II) complexes carrying donor antenna moieties, namely, triphenylamine (TPA) or N,N′-bis(phenyl)-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine (TPD), were synthesized and applied in SDSC. These novel donor-antenna dyes revealed spectacular performances of power conversion efficiencies in the range 1.5-3.4%, as measured under AM 1.5 spectral conditions. This was attributed to highly efficient light harvesting of these novel dyes and the improved charge-transfer dynamics at TiO₂-dye and dye-hole conductor interfaces. Different low molecular weight and polymeric triphenyldiamines were synthesized and utilized as hole-transporting layers (HTL) in SDSC. Different studies showed that low molecular TPDs displayed better efficiency than polymeric counterparts due to their improved filling into the pores of nc-TiO₂ layer. Another interesting study revealed that an optimum driving force in terms of HOMO-level difference between the dye and HTL decides charge carrier generation efficiency. Recently, novel hole conductors with spiro-bifluorene-triphenylamine core for transporting holes and tetraethylene glycol side chains for binding lithium ions were synthesized and applied in SDSC. This work clearly emphasizes that Li⁺-salt is required at the TiO₂/dye interface as well as in the bulk of HTL. It was also found that the addition of about 5-20% of these Li⁺-binding hole conductors and higher Li-salt (N-lithiotrifluoromethane sulfonamide) concentrations improved the SDSC performance. An improvement of about 120% in the solar cell efficiency as compared to the reference cells was achieved with an optimum composition of Li⁺-binding hole conductor and Li-salt.     

Lysophosphatidic acid regulates inflammation-related genes in human endothelial cells through LPA1 and LPA3

Lysophosphatidic acid (LPA) is a low-molecular-weight lysophospholipid (LPL), which regulates endothelial cells participating in inflammation processes via interactions with endothelial differentiation gene (Edg) family G protein-coupled receptors. In this study, we attempted to determine which LPA receptors mediate the inflammatory response in human endothelial cells. Introduction of siRNA against LPA₁ significantly suppressed LPA-induced ICAM-1 mRNA, total protein, and cell surface expressions, and subsequent U937 monocyte adhesion to LPA-treated human umbilical endothelial cells (HUVECs). By knock down of LPA₁ and LPA₃ in HUVECs, LPA-enhanced IL-1β mRNA expression was significantly attenuated. Moreover, LPA₁ and LPA₃ siRNA also inhibited LPA-enhanced IL-1-dependent long-term IL-8 and MCP-1 mRNA expression, and subsequent THP-1 cell chemotaxis toward LPA-treated HUVEC-conditioned media. These results suggest that the expression of LPA-induced inflammatory response genes is mediated by LPA₁ and LPA₃. Our findings suggest the possible utilization of LPA₁ or LPA₃ as drug targets to treat severe inflammation.     

Antioxidant activity of vasoactive intestinal peptide in HK2 human renal cells

Oxidative stress is a major mediator of tissue and cell injuries. The injury in chronic nephrotic syndrome, acute renal failure, myeloma kidney injury and other kidney diseases is initiated by oxidative stress. We have previously demonstrated that vasoactive intestinal peptide (VIP) acts as an antiproliferative agent in renal cancer cells. This study was designed to evaluate the renoprotective activity of VIP against H₂O₂-induced oxidative damage in a proximal tubule kidney cell line (human, non-tumor, HK2 cells) in order to investigate the potential usefulness of this peptide in the treatment of oxidative-stress related kidney diseases. HK2 cell viability was assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. Propidium iodide was used to identify cells undergoing apoptosis. Western blotting was performed with anti-Bcl-2, anti-Bax and anti-formyl peptide receptor (low-affinity variant FPRL-1) monoclonal antibodies whereas 2,7-dichlorofluorescein diacetate was used for measurement of levels of intracellular reactive oxygen species (ROS). HK2 cells were injured with H₂O₂ in order to induce apoptosis: the effect was time- and dose-dependent. VIP increased the levels of the antiapoptotic protein Bcl-2 and decreased those of the proapoptotic protein Bax. VIP decreased the intracellular ROS levels reached by H₂O₂-induced oxidative stress. VIP effect on ROS levels involved FPLR-1 but not VPAC_1,2 receptors as evidenced by the use of the respective antagonists WRW4 and JV-1-53. Thus, VIP protects HK2 cells from apoptosis by increasing Bcl-2 levels and this effect is initiated through FPLR1 receptor. In conclusion, VIP might exert a renoprotective effect by the suppression of oxidative stress.     

A 2-quinolinecarboxylate-substituted ruthenium(II) complex as a new type of sensitizer for dye-sensitized solar cells

A new type of ruthenium(II) complex containing a 2-quinolinecarboxylate ligand was designed and synthesized as a sensitizer for dye-sensitized solar cells, and its photophysical and photochemical properties were characterized. The solar cells created with this complex exhibited efficient panchromatic sensitization over the entire visible wavelength range extending into the near-IR region. An overall conversion efficiency of 8.2% was attained under standard air mass 1.5 irradiation (100 mW cm⁻²) with the short-circuit photocurrent density of 18.2 mA cm⁻², the open-circuit photovoltage of 0.63 V and the fill factor of 0.72.     

Indomethacin decreases EP2 prostanoid receptor expression in colon cancer cells

Nonsteroidal anti-inflammatory drugs (NSAIDs) can decrease the risk of colorectal cancer; however, it has not been established if this effect is solely through their ability to inhibit cyclooxygenase (COX). In this study the effects of indomethacin, a potent NSAID and nonselective COX inhibitor, was examined in LS174T human colon cancer cells. These cells were found to express EP2 prostanoid receptors, but not the EP1, EP3 or EP4 subtypes. Pretreatment of LS174T cells with indomethacin produced a complete inhibition of prostaglandin E(2) (PGE(2)) stimulated cyclic AMP (cAMP) formation in a dose dependent manner with an IC(50) of 21 microM. Interestingly, the inhibition of PGE(2)-stimulated cAMP formation by indomethacin was accompanied by a decrease in EP2 mRNA expression and by a decrease in the whole cell specific binding of [(3)H]PGE(2). Thus, treatment of LS174T cells with indomethacin causes a down regulation of EP2 prostanoid receptors expression that may be independent of COX inhibition.