Suzuki-Miyaura cross-coupling of aryl chlorides catalyzed by palladium precatalysts of N/O-functionalized pyrazolyl ligands

A series of palladium complexes, trans-[1-(R)-pz^3,5-Me₂]₂PdCl₂ {R = CH₂CONH(2,6-i-Pr₂-C₆H₃) (1b) and 2-(OH)-C₆H₁₀ (2b)}, supported over N/O-functionalized pyrazole derived ligands effectively catalyzed the more challenging Suzuki-Miyaura cross-coupling of a variety of activated aryl chlorides with phenyl boronic acid in air in a mixed-aqueous medium (DMF:H₂O, v/v = 9:1) in moderate to excellent yields. Besides the commonly encountered C_sp2-C_sp2 coupling, the 1b and 2b precatalysts also catalyzed the relatively difficult C_sp2-C_sp3 coupling of benzyl chloride with phenyl boronic acid. The 1b and 2b complexes were synthesized by the direct reaction of the respective N/O-functionalized pyrazolyl ligands, 1a and 2a, with (COD)PdCl₂ in 62-66% yields. The stability of the pyrazole-palladium interaction in the 1b and 2b complexes has been attributed to the deeply buried N_pyrazole-Pd interaction as evidenced from the density functional theory (DFT) studies.     

Highly trans-1,4 selective polymerization of 1,3-butadiene initiated by iron(III) bis(imino)pyridyl complexes

A series of 2,6-bis(imino)pyridyl iron(III) complexes of the general formula [2,6-(ArNCMe)₂C₅H₃N]FeCl₃ (Ar = -C₆H₅, 3a; 2-MeC₆H₄, 3b; 2-EtC₆H₄, 3c; 2-ⁱPrC₆H₄, 3d; cyclohexyl, 3e; 4-MeC₆H₄, 3f; 4-ⁱPrC₆H₄, 3g; 4-FC₆H₄, 3h and 4-CF₃C₆H₄, 3i), activated by alkylaluminum, MAO or MMAO, have been investigated in 1,3-butadiene polymerization. Iron(III) complex (3a), with the least steric hindrance around the metal center, gives polymer up to 99% in yield in 4 h (butadiene to iron ratio = 1000), and trans-1,4 selectivity about 94.7% at room temperature in toluene, while those (3b-3d) bearing alkyl substituents at the 2-position of each N-aryl ring exhibit much lower catalytic activity and tunable trans-1,4 selectivity. Introduction of an alkyl group at the 4-position (para-position, 3f and 3g) exerts a slightly beneficial effect on the trans-1,4 selectivity, while electronegative groups at the same position (3h and 3i) affect negatively on the activity. The effects of temperature, types of cocatalyst and Al/Fe molar ratio on the polymerization behavior are investigated. More importantly, a mechanism for forming trans-1,4 structure is also proposed.     

Synthesis of regioisomeric 17β-N-phenylpyrazolyl steroid derivatives and their inhibitory effect on 17α-hydroxylase/C17,20-lyase

The reaction of 3β-hydroxy-21-hydroxymethylidenepregn-5-en-3β-ol-20-one (1) with phenylhydrazine (2a) affords two regioisomers, 17β-(1-phenyl-3-pyrazolyl)androst-3-en-3β-ol (5a) and 17β-(1-phenyl-5-pyrazolyl)androst-5-en-3β-ol (6a). The direction of the ring-closure reactions of 1 with p-substituted phenylhydrazines (2b-e) depends strongly on the electronic features of the substituents. Oppenauer oxidation of 3β-hydroxy-17β-exo-heterocyclic steroids 5a-e and 6a-e yielded the corresponding Δ⁴-3-ketosteroids 9a-e and 10a-e. The inhibitory effects (IC₅₀) of these compounds on rat testicular C_17,20-lyase were investigated by means of an in vitro radioligand incubation technique.     

Dopamine release and molecular modeling study of some coumarin derivatives

4-aryl-2-amino-6-(4-hydroxy-2-oxo-2H-chromen-3-yl)-pyridin-3-carbonitrile (1), 4-aryl-2-oxo-6-(4-hydroxy-2-oxo-2H-chromen-3-yl)-pyridin-3-carbonitriles (2a-2c), 3-(6-aryl-1,2,5,6- tetrahydro-2-thioxopyrimidin-4-yl)-4-hydroxy-2H-chromen-2-one (3a, 3b) and pyrazol-3-yl-4-hydroxycoumarin derivatives (4a-4c, 5, 6a, 6b, 7a, 7b, and 8a-8c) were prepared in order to measure their % change dopamine release in comparison to amphetamine as reference, using PC-12 cells in different concentrations. In addition, the molecular modeling study of the compounds into 3BHH receptor was also demonstrated. The calculated inhibition constant (k_i) implemented in the AutoDock program revealed identical correlation with the experimental results to that obtained binding free energy (ΔG_b) as both parameters revealed reasonable correlation coefficients (R²) being 0.51 involving 10 compounds; (1, 2b, 2c, 3a, 3b, 4a, 4b, 6a, and 8c).     

Synthesis and structural characterizations of para-bis(dialkyl/diarylphosphino)phenylenes built around tetrahalogenated benzene cores

Double deprotonation of 1,2-dibromo-4,5-difluorobenzene and 1-bromo-2-chloro-4,5-difluorobenzene by lithium diisopropylamide (LDA) in ethereal solutions is facile at very low temperatures (T < −90 °C). The organo-dilithium intermediates thus generated react readily with chlorophosphines ClPR₂ (R = Ph and/or ⁱPr), producing 1,2-dibromo-3,6-bis(diphenylphosphino)-4,5-difluorobenzene (1a), 1,2-dibromo-3,6-bis(diisopropylphosphino)-4,5-difluorobenzene (1b) and 1-bromo-2-chloro-3,6-bis(diphenylphosphino)-4,5-difluorobenzene (1c). Corresponding P-oxides 2a-c are obtained by oxidation of 1a-c with H₂O₂. Analogous reactions of 1,2-dibromo-4,5-difluorobenzene and 1-bromo-2-chloro-4,5-difluorobenzene with only 1 equiv. of LDA do not result in selective monodeprotonations, as 1a and 1c are formed preferentially after ClPPh₂ quench. All of the isolated new compounds were fully characterized by multinuclear NMR spectroscopy, elemental analysis and/or mass-spectrometry. In addition, 1a, 1c, 2a, and 2b were characterized by single crystal X-ray diffraction methods.     

Bridged dinucleating N-heterocyclic carbene ligands and their double helical mercury(II) complexes

A series of six 3,6-bis(imidazolium-3-yl)pyridazine derivatives with different imidazole-N substituents have been synthesized and isolated as the salts [H₂L]Cl₂ (1a)-(6a) and [H₂L](PF₆)₂ (1b)-(6b). Solid state structures have been determined crystallographically for eleven out of the twelve compounds, revealing diverse hydrogen bonding patterns that involve the imidazolium-C²H units and the anions. N-heterocyclic carbene (NHC) mercury(II) complexes [Hg₂L₂](PF₆)₄ (7)-(9) are readily formed in good yields from ligand precursors [H₂L](PF₆)₂ and Hg(OAc)₂, as long as imidazole-N substituents are not too bulky. X-ray crystallography reveals double helical bimetallic arrangements for the stable [Hg₂L₂]⁴⁺ cations. Ligand scrambling in [Hg₂L₂]⁴⁺ occurs only in the presence of free carbene precursor, presumably via an associative mechanism.     

Influence of the phosphine arrangement on the reactivity of palladium(II) and platinum(II) polyphosphine complexes with copper(I) chloride

The distorted square-planar complexes [Pd(PNHP)Cl]Cl (1) (PNHP = bis[2-(diphenylphosphino)ethyl]amine), [M(P₃)Cl]Cl [P₃ = bis[2-(diphenylphosphino)ethyl]phenylphosphine; M = Pd (2), Pt (3)] and [Pt(NP₃)Cl]Cl (5) (NP₃ = tris[2-(diphenylphosphino)ethyl]amine), coexisting in the later case with a square-pyramidal arrangement, react with one equivalent of CuCl to give the mononuclear heteroionic systems [M(L)Cl](CuCl₂) [L = PNHP, M = Pd (1a); L = P₃, M = Pd (2a), Pt (3a); L = NP₃, M = Pt (5a)]. The crystal structure of 3a confirms that Pt(II) retains the distorted square-planar geometry of 3 in the cation with P₃ acting as tridentate chelating ligand, the central P atom being trans to one chloride. The counter anion is a nearly linear dichlorocuprate(I) ion. However, the five-coordinate complexes [Pd(NP₃)Cl]Cl (4), [M(PP₃)Cl]Cl (M = Pd (6), Pt (7); PP₃ = tris[2-(diphenylphosphino)ethyl] phosphine) containing three fused five-membered chelate rings undergo a ring-opening by interaction with one (4, 6, 7) and two (6, 7) equivalents of CuCl with formation of neutral MCu(L)Cl₃ [L = NP₃, M = Pd (4a); L = PP₃, M = Pd (6a), Pt (7a)] and ionic [MCu(PP₃)Cl₂](CuCl₂) [M = Pd (6b), Pt (7b)] compounds, respectively. The heteronuclear systems were shown by ³¹P NMR to have structures where the phosphines are acting as tridentate chelating ligands to M(II) and monodentate bridging to Cu(I). Further additions of CuCl to the neutral species 6a and 7a in a 1:1 ratio resulted in the achievement of the ionic complexes 6b and 7b with ions as counter anions. It was demonstrated that the formation of heterobimetallic or just mononuclear mixed salt complexes was clearly influenced by the polyphosphine arrangement with the tripodal ligands giving the former compounds. However, complexes [M(NP₃)Cl]Cl constitute one exception and the type of reaction undergone versus CuCl is a function of the d⁸ metal centre.     

Sterically crowded triazenides as novel ancillary ligands in copper chemistry

We have synthesized copper salts MN₃RR′ derived from the biphenyl- or m-terphenyl-substituted triazenes Tph₂N₃H (1a) and Dmp(Tph)N₃H (1b) (Dmp = 2,6-Mes₂C₆H₃ with Mes = 2,4,6-Me₃C₆H₂; Tph = 2-TripC₆H₄ with Trip = 2,4,6-i-Pr₃C₆H₂). The homoleptic copper triazenide [CuN₃Tph₂] (2a) was obtained in high yield from the metallation of 1a with mesityl copper in n-heptane, while the complex [CuN₃(Dmp)Tph] (2b) was generated by the same method in situ only. Reaction of 2a with triphenylphosphane gave the 2:1 adduct [CuN₃Tph₂(PPh₃)₂] (3a), regardless of the used complex/donor ratio, while reaction of 2a or 2b with a stochiometric amount of t-butylisonitrile afforded the 1:1 adducts [Tph₂N₃CuCNtBu] (4a) and [Dmp(Tph)N₃CuCNtBu] (4b). All new compounds (except 2b) have been characterized by ¹H NMR, ¹³C NMR and IR spectroscopy, elemental analysis, melting point (not 2a), and X-ray crystallography. The IR spectroscopic examination of the ν(CN) stretch in the isonitrile adducts 4a and 4b revealed the weaker donor character of the supporting triazenido ligands compared to related β-diketiminato ligands.     

Diheteroarylmethyl substituted titanocenes: A novel class of possible anti-cancer drugs

From the reaction of tert-butyl lithium or n-butyl lithium with N-methylpyrrole (1a), furan (1b) or 2-bromo-thiophen (1c), 2-N-methylpyrrolyl lithium (2a), 2-furyl lithium (2b) or 2-thiophenyl lithium (2c), respectively, was obtained. When reacted with 6-(2-N-methylpyrrolyl) fulvene (3a), 6-(2-furyl) fulvene (3b) or 6-(2-thiophenyl) fulvene (3c), the corresponding lithiated intermediates were formed (4a-c). Titanocenes (5a-c) were obtained through transmetallation with titanium tetrachloride. When these titanocenes were tested against pig kidney epithelial (LLC-PK) cells, inhibitory concentrations (IC₅₀) of 32 μM, 140 μM, and 240 μM, respectively, were observed. These values represent improved cytotoxicity against LLC-PK, compared to their ansa-analogues.     

New aryl phosphinite ligands avoiding ortho-metallation: Synthesis and molecular structures of trans-[PdCl2(PPh2OR)2] and trans-[Rh(CO)Cl(PPh2OR)2] (R = 2,4,6-Me3C6H2; 2,6-Ph2C6H3)

The new aryl phosphinites PPh₂OR (R = 2,4,6-Me₃C₆H₂, 1; R = 2,6-Ph₂C₆H₃, 2) have been prepared from chlorodiphenylphosphine and the corresponding phenols. In these ligands, the ortho-positions of the aromatic phosphite function are blocked by methyl and phenyl substituents, which allows coordination to metal centres without ortho-metallation. Thus, reaction with [PdCl₂(cod)] leads to the complexes trans-[PdCl₂(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 3; R = 2,6-Ph₂C₆H₃, 4), while the reaction with [Rh₂(CO)₄Cl₂] gives trans-[Rh(CO)Cl(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 5; R = 2,6-Ph₂C₆H₃, 6). The single-crystal X-ray structure analyses of 3 and 5 confirm the trans-coordination of the new ligands in these square-planar complexes.     

Synthesis, characterization of [{(N-methyl-N-benzyl)amino}methyl]ferrocenes and their cyclopalladated complexes: Crystal structure of σ-Pd[(η-C5H5)Fe(η-C5H3CH2N(CH3)CH2C6H4NO2-4)]Cl(PPh3)

Condensation of aminomethylferrocene (1) and substituted benzaldehydes resulted in aldimines 2a-c which followed by reduction with sodium borohydride to give 3a-c. N-methylation of 3a-c with HCHO/NaCNBH₃/HOAc led to 4a-c. Treatment of 4a-c with sodium palladium tetrachloride in the presence of sodium acetate afforded cleanly cyclopalladated 5a-c in which configurations consisted of the R_NR_C, S_NS_C. The preferable activation of C_Ferrocenyl-H bond over C_Phenyl-H bond was also observed. All compounds 2-5 were characterized by elemental analysis, IR and ¹H NMR. In addition, the molecular structure of 5c was confirmed by single crystal X-ray diffraction. The possible mechanism for the formation of 5 was also discussed.     

Neighbouring metal induced oxidative addition at the iron centre amongst the iron-arylpyridylphosphine complexes

Complexes of the type (η⁴-BuC₅H₅)Fe(CO)₂(P) (P = PPh₂Py 3, PPhPy₂4, PPy₃5; Py = 2-pyridyl) were satisfactorily prepared. Upon treatment of 3 with M(CO)₃(EtCN)₃ (M = Mo, 6a; W, 6b), the pyridyl N-atom could be coordinated to the metal M, which then eliminates a CO ligand from the Fe-centre and induced an oxidative addition of the endo-C-H of (η⁴-BuC₅H₅). This results in a bridged hydrido heterodimetallic complex [(η⁵-BuC₅H₄)Fe(CO)(μ-P,N-PPh₂Py)(μ-H)M(CO)₄] (M = Mo, 7a, 81%; W, 7b, 76%). The reaction of 4 or 5 with 6a,b did not give the induced oxidative addition, although these complexes contain more than one pyridyl N-atom. The reaction of 4 with M(CO)₄(EtCN)₂ (M = Mo, 9a; W, 9b) produced heterodimetallic complexes [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′-PPhPy₂)M(CO)₄] (M = Mo, 10a, 81%; W, 10b, 83%). Treatment of 5 with 6a,b gave [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′,N″-PPy₃)M(CO)₃] (M = Mo, 12a, 96%; W, 12b, 78%).     

Synthesis and exploratory coordination chemistry of the new ditertiary carbinamine ligand 2,6-bis(α-aminoisopropyl)pyridine

The new pyridine-based N∩N∩N tridentate ligand 2,6-C₅H₃N(CMe₂NH₂)₂ (1) was synthesized by the treatment of 2,6-pyridinedicarbonitrile with an excess of the organocerium reagent in situ generated from CeCl₃ and methyllithium in THF. The reaction of 1 with [RuCl₂(PPh₃)₃] in THF at ambient conditions afforded (OC-6-23)-[RuCl{2,6-C₅H₃N(CMe₂NH₂)₂}(PPh₃)₂]Cl (2). The corresponding dimethyl sulfoxide complex [RuCl{2,6-C₅H₃N(CMe₂NH₂)₂}{S(O)Me₂}₂]Cl (3) was isolated as a mixture of the (OC-6-23) and (OC-6-32) stereoisomers 3a and 3b from the reaction between 1 and (OC-6-22)-[RuCl₂{S(O)Me₂}₃(OSMe₂)] in toluene at 80 °C. A prolonged interaction in toluene at reflux temperature gave isomerically pure 3a. The metal trichloride hydrates MCl₃ · xH₂O (M = Ru, Rh, Ir; x ≅ 2-4) produced mer-[RuCl₃{2,6-C₅H₃N(CMe₂NH₂)₂}] (M = Ru: 4; Rh: 5; Ir: 6), when combined with 1 in refluxing ethanol. The crystal structures of the following compounds were determined: ligand 1 and complexes 2-5 as addition compounds 2 · CH₂Cl₂, 3a · C₇H₈, 4 · EtOH and .     

Ruthenium(II) carbonyl chloride complexes containing pyridine-functionalised bidentate N-heterocyclic carbenes: Synthesis, structures, and impact of the carbene ligands on catalytic activities

A series of new ruthenium(II) carbonyl chloride complexes with pyridine-functionalised N-heterocyclic carbenes [Ru(Py-NHC)(CO)₂Cl₂], [Py-NHC = 3-methyl-1-(2-pyridyl)imidazol-2-ylidene, 1 (1a and 1b); 3-methyl-1-(2-picoyl)imidazol-2-ylidene, 2 (2a and 2b); 3-methyl-1-(2-pyridyl)benzimidazolin-2-ylidene, 3 (3b); 3-methyl-1-(2-picoyl)benzimidazolin-2-ylidene, 4 (4a and 4b); 1-methyl-4-(2-pyridyl)-1,2,4-triazoline-5-ylidene, 5 (5a and 5b)] have been prepared by transmetallation from the corresponding silver carbene complexes and characterized by NMR, IR spectroscopy and elemental analysis. In these complexes with bidentate Py-NHC ligands, one CO ligand is trans to the Py ligand. In 1a, 2a, 4a, and 5a, the NHC ligand is trans to the other CO ligand, thus leaving the two Cl⁻ ligands trans to each other. In 1b, 2b, 3b, 4b, and 5b, the NHC ligands are trans to one Cl⁻ ligand, and the two Cl⁻ ligands are cis to each other. The structures for 1b, 2b, 3b and 4b have been determined by single-crystal X-ray diffraction. These complexes are efficient catalysts in the transfer hydrogenation of acetophenone and their catalytic activities are found to be influenced by electronic effect of the N-heterocyclic carbene ligands.     

Synthesis and structure of titanium alkoxides based on tetraphenyl substituted 2,6-dimethanolpyridine moiety

Novel titanocanes and spirobititanocanes based on 2,6-bis[hydroxy(diphenyl)methyl]pyridine (1a) and 2,6-di(hydroxymethyl)pyridine (1b) - [2,6-C₅H₃N(CPh₂O)₂]Ti(O-i-Pr)₂ (2a), [2,6-C₅H₃N(CPh₂O)₂]₂Ti (3a), [2,6-C₅H₃N(CH₂O)₂]₂Ti (3b), [2,6-C₅H₃N(CPh₂O)₂]TiCl₂ (4) - as well as the closely related N-phenyl derivative PhN(CH₂CH₂O)₂Ti(Cl)Cp (5) have been synthesized. Complexes 2-5 were characterized by ¹H and ¹³C NMR spectroscopy and elemental analysis data. The molecular structure of 3a was determined by X-ray structure analysis.     

Regioselectivity in the glycosylation of 5-(3-chlorobenzo[b]thien-2-yl)-4H-1,2,4-triazole-3-thiol

The glycosylation of 5-(3-chlorobenzo[b]thien-2-yl)-4H-1,2,4-triazole-3-thiol (1) and its 3-benzylsulfanyl and 3-methylsulfanyl derivatives with different glycosyl halides 2-4 has been studied in presence of base. The S-glycosides 5-7 were obtained in the presence of triethylamine, whereas the respective S,N⁴-bis(glycosyl) derivatives 8-10 were synthesized in the presence of potassium carbonate; the S,N²-bis(glycosyl) isomer 11 could also be isolated in the case of the galactosyl analog. Similarly, after protecting 1 as 3-benzyl(methyl)sulfanyl derivatives 12 or 13, the N⁴-glycosyl analogs 14-19 as well as minor amounts of S,N²-bis(galactosyl) isomers 20 and 21 were formed. The theoretical calculations using AM1 semiempirical methods agreed with the experimental results. Microwave irradiation (MWI) led to higher yields in much less time than the conventional methods, and no change in regioselectivity has been noticed.     

β-Diiminatolanthanoid(III) halides revisited

The crystalline compounds [LnCl₂(L)(thf)₂] [Ln = Ce (1), Tb (2), Yb (3)], [NdI₂(L)(thf)₂] (4), [LnCl(L′)₂] [Ln = Tb (5), Yb (6) (a known compound)] and [YbCl(L′′)(μ-Cl)₂Li(OEt₂)₂] (7) have been prepared [L = {N(C₆H₃Prⁱ₂-2,6)C(H)}₂CPh, L′ = {N(SiMe₃)C(Ph)}₂CH, L′′ = {N(SiMe₃)C(C₆H₄Ph-4)}₂CH]. The X-ray molecular structures of 2-7 have been established; in each, the monoanionic ligand L, L′ or L′′ is N,N′-chelating and essentially π-delocalised. Each of 1-7 was prepared from the appropriate LnCl₃, or for 4 [NdI₃(thf)₂], and an equivalent portion of the appropriate alkali metal [Li for 7, Na for 2, 3 and 5, or K for 1, 4 and 6] β-diiminate in thf; the isolation of exclusively 5 and 6 (rather than the L′ analogues of 2 or 3) is noteworthy, as is the structure of 7 which has no precedent in Group 3 or 4f metal β-diiminato chemistry.     

Synthesis and antitubercular evaluation of amidoalkyl dibenzofuranols and 1H-benzo[2,3]benzofuro[4,5-e][1,3]oxazin-3(2H)-ones

A new class of amidoalkyl dibenzofuranols and 1H-benzo[2,3]benzofuro[4,5-e][1,3]oxazin-3(2H)-ones was synthesized in very good yields through polyphosphoric acid supported on silica (PPA-SiO₂) catalyzed one-pot three component condensation of 2-dibenzofuranol; aromatic aldehydes and acetamide or benzamide or urea under solvent free conditions. At 125 °C the reaction led to the formation of amidoalkyl dibenzofuranols 5a-k where as at 160 °C cyclization take place to give oxazin-3(2H)-one analogues 6a-e. Screening all the 16 compounds for in vitro antimycobacterial activity against Mycobacterium tuberculosis H37Rv (MTB) resulted 1-((4-chlorophenyl)(2-hydroxydibenzo[b,d]furanyl)methyl)urea 5h; 1-((4-bromophenyl)(2-hydroxydibenzo[b,d]furanyl)methyl)urea 5i; 1-phenyl-1H-benzo[2,3]benzo furo[4,5-e][1,3]oxazin-3(2H)-one 6a (MIC 3.13 μg/mL) and 1-(4-chlorophenyl)-1H-benzo[2,3]benzofuro[4,5-e][1,3]oxazin-3(2H)-one 6b; 1-(4-bromophenyl)-1H-benzo[2,3]benzofuro [4,5-e][1,3]oxazin-3(2H)-one 6c (MIC 1.56 μg/mL) as most active antitubercular agents.     

Synthesis and antimicrobial activity of some new N-glycosides of 2-thioxo-4-thiazolidinone derivatives

5-Arylidene-2-thioxo-4-thiazolidinones 3a-f react with each of 2,3,4,6-tetra-O-acetyl-α-d-glucopyranosyl and α-d-galactopyranosyl bromides 4a,b in acetone in the presence of aqueous potassium hydroxide at room temperature to afford N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl) or N-(2,3,4,6-tetra-O-acetyl-β-d-galactopyranosyl) 2-thioxo-4-thiazolidinone derivatives 5a-f. Similarly, the reaction of 5-cycloalkylidene-2-thioxo-4-thiazolidinones 7a,b with 4a gave the corresponding N-glucosides 8a,b. Also, 5-pyrazolidene rhodanines 10a-e react with 4a to afford the new N-glucosides 11a-e. Treatment of compounds 15 and 16 with 4a in the presence of few drops of triethylamine or in KOH solution accomplished the mono- and bis-nucleosides 17 and 18, respectively. Some selected products were tested for their antimicrobial activities.     

Complexes of N-thiophosphorylthioureas RNHC(S)NHP(S)(OiPr)2 (HL) (R = pyridin-2-yl, pyridin-3-yl, 6-amino-pyridin-2-yl) with copper(I): Crystal structures of Cu(PPh3)nL (n = 1, 2)

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RNHC(S)NHP(S)(OiPr)₂ [R = pyridin-2-yl (HL^a), pyridin-3-yl (HL^b), 6-amino-pyridin-2-yl (HL^c)] with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to mononuclear [Cu(PPh₃)₂L^a,b-S,S′] (1, 2) and [Cu(PPh₃)L^c-S,S′] (3) complexes. Using copper(I) iodide instead of Cu(PPh₃)₃I, polynuclear complexes [Cu_n(L-S,S′)_n] (4-6) were obtained. The structures of these compounds were investigated by IR, ¹H, ³¹P{¹H} NMR spectroscopy, ES-MS and elemental analyses. The crystal structures of Cu(PPh₃)₂L^b (2) and Cu(PPh₃)L^c (3) were determined by single-crystal X-ray diffraction.