Cotton genome mapping with new microsatellites from Acala ‘Maxxa’ BAC-ends

Fine mapping and positional cloning will eventually improve with the anchoring of additional markers derived from genomic clones such as BACs. From 2,603 new BAC-end genomic sequences from Gossypium hirsutum Acala ‘Maxxa’, 1,316 PCR primer pairs (designated as MUSB) were designed to flank microsatellite or simple sequence repeat motif sequences. Most (1164 or 88%) MUSB primer pairs successfully amplified DNA from three species of cotton with an average of three amplicons per marker and 365 markers (21%) were polymorphic between G. hirsutum and G. barbadense. An interspecific RIL population developed from the above two entries was used to map 433 marker loci and 46 linkage groups with a genetic distance of 2,126.3 cM covering approximately 45% of the cotton genome and an average distance between two loci of 4.9 cM. Based on genome-specific chromosomes identified in G. hirsutum tetraploid (A and D), 56.9% of the coverage was located on the A subgenome while 39.7% was assigned to the D subgenome in the genetic map, suggesting that the A subgenome may be more polymorphic and recombinationally active than originally thought. The linkage groups were assigned to 23 of the 26 chromosomes. This is the first genetic map in which the linkage groups A01 and A02/D03 have been assigned to specific chromosomes. In addition the MUSB-derived markers from BAC-end sequences markers allows fine genetic and QTL mapping of important traits and for the first time provides reconciliation of the genetic and physical maps. Limited QTL analyses suggested that loci on chromosomes 2, 3, 12, 15 and 18 may affect variation in fiber quality traits. The original BAC clones containing the newly mapped MUSB that tag the QTLs provide critical DNA regions for the discovery of gene sequences involved in biological processes such as fiber development and pest resistance in cotton. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

A combined RFLP-SSR-AFLP map of tetraploid cotton based on a Gossypium hirsutum x Gossypium barbadense backcross population.

An interspecific Gossypium hirsutum x Gossypium barbadense backcross population of 75 BC1 plants was evaluated for 1014 markers. The map consists of 888 loci, including 465 AFLPs, 229 SSRs, 192 RFLPs, and 2 morphological markers, ordered in 37 linkage groups that represent most if not all of the 26 chromosomes, altogether spanning 4400 cM. Loci were not evenly distributed over linkage groups, and 18 of the 26 long groups had a single dense region. This paper proposes a partially revised list of the 13 pairs of homoeologous A/D chromosomes of the 2n = 4x = 52 tetraploid cotton genome. The major revisions, which involve the c3-c17, c4-c22, c5-D08, and c10-c20 homoeologous pairs, are based on the mapping of 68 SSR and RFLP loci with a known chromosome assignment, as well as on comparative alignments with previously published G. hirsutum x G. barbadense maps. The overall congruency in the locus orders and distances of common SSR and RFLP loci in these maps allows for an estimation of the consensus length that reaches a minimum of 5500 cM, and is encouraging for future efforts aimed at developing an integrated map of cultivated cotton. The present map also provides a firm framework for precision mapping of Mendelian components of quantitative traits in cotton     

Development and mapping of 2240 new SSR markers for rice (Oryza sativa L.).

A total of 2414 new di-, tri- and tetra-nucleotide non-redundant SSR primer pairs, representing 2240 unique marker loci, have been developed and experimentally validated for rice (Oryza sativa L.). Duplicate primer pairs are reported for 7% (174) of the loci. The majority (92%) of primer pairs were developed in regions flanking perfect repeats > or = 24 bp in length. Using electronic PCR (e-PCR) to align primer pairs against 3284 publicly sequenced rice BAC and PAC clones (representing about 83% of the total rice genome), 65% of the SSR markers hit a BAC or PAC clone containing at least one genetically mapped marker and could be mapped by proxy. Additional information based on genetic mapping and "nearest marker" information provided the basis for locating a total of 1825 (81%) of the newly designed markers along rice chromosomes. Fifty-six SSR markers (2.8%) hit BAC clones on two or more different chromosomes and appeared to be multiple copy. The largest proportion of SSRs in this data set correspond to poly(GA) motifs (36%), followed by poly(AT) (15%) and poly(CCG) (8%) motifs. AT-rich microsatellites had the longest average repeat tracts, while GC-rich motifs were the shortest. In combination with the pool of 500 previously mapped SSR markers, this release makes available a total of 2740 experimentally confirmed SSR markers for rice, or approximately one SSR every 157 kb.     

Characteristics and analysis of simple sequence repeats in the cotton genome based on a linkage map constructed from a BC1 population between Gossypium hirsutum and G. barbadense.

In the past decade, several molecular maps of cotton have been constructed using diverse DNA molecular markers and mapping populations. In this study, an interspecific linkage map of allotetraploid cotton was developed using a BC1 population ((Gossypium hirsutum x G. barbadense) x G. hirsutum). This map was genome-wide and was based entirely on simple sequence repeat (SSR) markers. Forty-four linkage groups were assigned to 26 chromosomes, with 917 loci spanning 5452.2 cM of the genome. The average distance between loci was 5.9 cM, providing uniform coverage of the A subgenome and D subgenome. Characteristics of this map were analyzed in detail, including the distributions of genomic SSRs, expressed sequence tag (EST)-SSRs, and distorted markers. Furthermore, the relationships between motif characteristics (size, type, length) and the level of polymorphism in EST-SSRs were also surveyed. The results showed that tetranucleotide and dinucleotide repeats had similar levels of polymorphism, and ACAT, AC, and ACT repeats had the highest polymorphism rates. Loci with lengths of 27 bp, 33 bp, and 24 bp were more likely to be polymorphic. This work will provide information to assist in designing future EST-SSRs.     

An SSR genetic map of Sorghum bicolor (L.) Moench and its comparison to a published genetic map.

Sorghum bicolor (L.) Moench is an important grain and forage crop grown worldwide. We developed a simple sequence repeat (SSR) linkage map for sorghum using 352 publicly available SSR primer pairs and a population of 277 F2 individuals derived from a cross between the Westland A line and PI 550610. A total of 132 SSR loci appeared polymorphic in the mapping population, and 118 SSRs were mapped to 16 linkage groups. These mapped SSR loci were distributed throughout 10 chromosomes of sorghum, and spanned a distance of 997.5 cM. More important, 38 new SSR loci were added to the sorghum genetic map in this study. The mapping result also showed that chromosomes SBI-01, SBI-02, SBI-05, and SBI-06 each had 1 linkage group; the other 6 chromosomes were composed of 2 linkage groups each. Except for 5 closely linked marker flips and 1 locus (Sb6_34), the marker order of this map was collinear to a published sorghum map, and the genetic distances of common marker intervals were similar, with a difference ratio 相似文献   

High-density Linkage Map of Cultivated Allotetraploid Cotton Based on SSR, TRAP, SRAP and AFLP Markers

A high-density linkage map was constructed for an F2 population derived from an Interspecific cross of cultivated allotetraploid species between Gossypium hirsutum L. and G. barbadense L. A total of 186 F2 individuals from the Interspecific cross of ＂CRI 36 × Hal 7124＂ were genotyped at I 252 polymorphic loci Including a novel marker system, target region amplification polymorphism （TRAP）. The map consists of 1 097 markers, including 697 simple se- quence repeats （SSRs）, 171 TRAPs, 129 sequence-related amplified polymorphisms, 98 amplified fragment length polymorphisms, and two morphological markers, and spanned 4 536.7 cM with an average genetic distance of 4.1 cM per marker. Using 45 duplicated SSR loci among chromosomes, 11 of the 13 pairs of homologous chromosomes were Identified In tetraploid cotton. This map will provide an essential resource for high resolution mapping of quantitative trait loci and molecular breeding in cotton.     

Genetic mapping and QTL analysis of fiber-related traits in cotton (<Emphasis Type="Italic">Gossypium</Emphasis>)

Cotton, the leading natural fiber crop, is largely produced by two primary cultivated allotetraploid species known as Upland or American cotton (Gossypium hirsutum L.) and Pima or Egyptian cotton (G. barbadense L.). The allotetraploid species diverged from each other and from their diploid progenitors (A or D genome) through selection and domestication after polyploidization. To analyze cotton AD genomes and dissect agronomic traits, we have developed a genetic map in an F₂ population derived from interspecific hybrids between G. hirsutum L. cv. Acala-44 and G. barbadense L. cv. Pima S-7. A total of 392 genetic loci, including 333 amplified fragment length polymorphisms (AFLPs), 47 simple sequence repeats (SSRs), and 12 restriction fragment length polymorphisms (RFLPs), were mapped in 42 linkage groups, which span 3,287 cM and cover approximately 70% of the genome. Using chromosomal aneuploid interspecific hybrids and a set of 29 RFLP and SSR framework markers, we assigned 19 linkage groups involving 223 loci to 12 chromosomes. Comparing four pairs of homoeologous chromosomes, we found that with one exception linkage distances in the A-subgenome chromosomes were larger than those in their D-subgenome homoeologues, reflecting higher recombination frequencies and/or larger chromosomes in the A subgenome. Segregation distortion was observed in 30 out of 392 loci mapped in cotton. Moreover, approximately 29% of the RFLPs behaved as dominant loci, which may result from rapid genomic changes. The cotton genetic map was used for quantitative trait loci (QTL) analysis using composite interval mapping and permutation tests. We detected seven QTLs for six fiber-related traits; five of these were distributed among A-subgenome chromosomes, the genome donor of fiber traits. The detection of QTLs in both the A subgenome in this study and the D subgenome in a previous study suggests that fiber-related traits are controlled by the genes in homoeologous genomes, which are subjected to selection and domestication. Some chromosomes contain clusters of QTLs and presumably contribute to the large amount of phenotypic variation that is present for fiber-related traits.Communicated by J. Dvorak     

Physical molecular maps of wheat chromosomes

In bread wheat, a set of 527 simple sequence repeats (SSRs) were tried on 164 deletion lines, leading to a successful mapping of 270 SSRs on 313 loci covering all 21 chromosomes. A maximum of 119 loci (38%) were located on B subgenome, and a minimum of 90 loci (29%) mapped on D subgenome. Similarly, homoeologous group 7 carried a maximum of 61 loci (19%), and group 4 carried a minimum of 22 loci (7%). Of the cited 270 SSRs, 39 had multiple loci, but only eight of these detected homoeologous loci. Linear order of loci in physical maps largely corresponded with those in the genetic maps. Apparently, distances between each of only 26 pairs of loci significantly differed from the corresponding distances on genetic maps. Some loci, which were genetically mapped close to the centromere, were physically located distally, while other loci that were mapped distally in the genetic maps were located in the proximal bins in the physical maps. This suggested that although the linear order of the loci was largely conserved, variation does exist between genetic and physical distances.Electronic Supplementary Material Supplementary material is available for this article at .     

Microsatellite-based deletion bin system for the establishment of genetic-physical map relationships in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Because of polyploidy and large genome size, deletion stocks of bread wheat are an ideal material for physically allocating ESTs and genes to small chromosomal regions for targeted mapping. To enhance the utility of deletion stocks for chromosome bin mapping, we characterized a set of 84 deletion lines covering the 21 chromosomes of wheat using 725 microsatellites. We localized these microsatellite loci to 94 breakpoints in a homozygous state (88 distal deletions, 6 interstitial), and 5 in a heterozygous state representing 159 deletion bins. Chromosomes from homoeologous groups 2 and 5 were the best covered (126 and 125 microsatellites, respectively) while the coverage for group 4 was lower (80 microsatellites). We assigned at least one microsatellite in up to 92% of the bins (mean 4.97 SSR/bin). Only a few discrepancies concerning marker order were observed. The cytogenetic maps revealed small genetic distances over large physical regions around the centromeres and large genetic to physical map ratios close to the telomeres. As SSRs are the markers of choice for many genetic and breeding studies, the mapped microsatellite loci will be useful not only for deletion stock verifications but also for allocating associated QTLs to deletion bins where numerous ESTs that could be potential candidate genes are currently assigned.     

Genetic mapping of EST-derived microsatellites from the diploid<Emphasis Type="Italic"> Gossypium arboreum</Emphasis> in allotetraploid cotton

To increase the numbers of microsatellites available for use in constructing a genetic map, and facilitate the use of functional genomics to elucidate fiber development and breeding in cotton, we sampled microsatellite sequences from expressed sequence tags (ESTs) transcribed during fiber elongation in the A-genome species Gossypium arboreum to evaluate their frequency of occurrence, level of polymorphism and distribution in the At and Dt subgenomes of tetraploid cotton. From among ESTs derived from G. arboreum fibers at 7–10 days post anthesis (dpa), 931 ESTs were found to contain simple sequence repeats (SSRs); 544 (58.4%) EST-SSR primer pairs were developed, and 468 (86%) amplified PCR products from allotetraploid cotton ( G. hirsutum cv. TM-1 and G. barbadense cv. Hai7124). However, only 99 (18.2%) of these were found to be polymorphic and segregating in our interspecific BC₁ mapping population [(TM-1×Hai7124)×TM-1]. In these amplified and informative EST-SSRs, hexa- and tri-nucleotide repeat motifs were the most frequent, representing 40.1 and 30%, respectively, of the total. A total of 111 loci detected with these 99 EST-SSRs were integrated into our backbone map including 511 SSR loci. The distribution of the EST-SSRs appeared to be non-random, since 72 loci were anchored to the At and 37 to the Dt subgenome of allotetraploid cotton based on linkage tests. Interestingly, out of the 10 pairs of duplicate loci amplified, seven were mapped to the corresponding homeologous linkage groups and/or chromosomes. BLASTX analysis revealed that 69 of the 99 ESTs showed significant similarities to known genes. Some genes important for fiber development, such as sucrose synthase, were mapped to corresponding chromosomes. These EST-SSRs provide structural and functional genomic information that will be useful for understanding cotton fiber development.Communicated by R. Hagemann     

Genetic and physical mapping of new EST-derived SSRs on the A and B genome chromosomes of wheat

The availability of genetic maps and phenotypic data of segregating populations allows to localize and map agronomically important genes, and to identify closely associated molecular markers to be used in marker-assisted selection and positional cloning. The objective of the present work was to develop a durum wheat intervarietal genetic and physical map based on genomic microsatellite or genomic simple sequence repeats (gSSR) markers and expressed sequence tag (EST)-derived microsatellite (EST-SSR) markers. A set of 122 new EST-SSR loci amplified by 100 primer pairs was genetically mapped on the wheat A and B genome chromosomes. The whole map also comprises 149 gSSR markers amplified by 120 primer pairs used as anchor chromosome loci, two morphological markers (Black colour, Bla1, and spike glaucousness, Ws) and two seed storage protein loci (Gli-A2 and Gli-B2). The majority of SSR markers tested (182) was chromosome-specific. Out of 275 loci 241 loci assembled in 25 linkage groups assigned to the chromosomes of the A and B genome and 34 remained unlinked. A higher percentage of markers (54.4%), localized on the B genome chromosomes, in comparison to 45.6% distributed on the A genome. The whole map covered 1,605 cM. The B genome accounted for 852.2 cM of genetic distance; the A genome basic map spanned 753.1 cM with a minimum length of 46.6 cM for chromosome 5A and a maximum of 156.2 cM for chromosome 3A and an average value of 114.5 cM. The primer sets that amplified two or more loci mapped to homoeologous as well as to non-homoeologous sites. Out of 241 genetically mapped loci 213 (88.4%) were physically mapped by using the nulli-tetrasomic, ditelosomic and a stock of 58 deletion lines dividing the A and B genome chromosomes in 94 bins. No discrepancies concerning marker order were observed but the cytogenetic maps revealed in some cases small genetic distance covered large physical regions. Putative function for mapped SSRs were assigned by searching against GenBank nonredundant database using TBLASTX algorithms.     

Development of chromosome-specific markers with high polymorphism for allotetraploid cotton based on genome-wide characterization of simple sequence repeats in diploid cottons (Gossypium arboreum L. and Gossypium raimondii Ulbrich)

Background

Tetraploid cotton contains two sets of homologous chromosomes, the At- and Dt-subgenomes. Consequently, many markers in cotton were mapped to multiple positions during linkage genetic map construction, posing a challenge to anchoring linkage groups and mapping economically-important genes to particular chromosomes. Chromosome-specific markers could solve this problem. Recently, the genomes of two diploid species were sequenced whose progenitors were putative contributors of the At- and Dt-subgenomes to tetraploid cotton. These sequences provide a powerful tool for developing chromosome-specific markers given the high level of synteny among tetraploid and diploid cotton genomes. In this study, simple sequence repeats (SSRs) on each chromosome in the two diploid genomes were characterized. Chromosome-specific SSRs were developed by comparative analysis and proved to distinguish chromosomes.

Results

A total of 200,744 and 142,409 SSRs were detected on the 13 chromosomes of Gossypium arboreum L. and Gossypium raimondii Ulbrich, respectively. Chromosome-specific SSRs were obtained by comparing SSR flanking sequences from each chromosome with those from the other 25 chromosomes. The average was 7,996 per chromosome. To confirm their chromosome specificity, these SSRs were used to distinguish two homologous chromosomes in tetraploid cotton through linkage group construction. The chromosome-specific SSRs and previously-reported chromosome markers were grouped together, and no marker mapped to another homologous chromosome, proving that the chromosome-specific SSRs were unique and could distinguish homologous chromosomes in tetraploid cotton. Because longer dinucleotide AT-rich repeats were the most polymorphic in previous reports, the SSRs on each chromosome were sorted by motif type and repeat length for convenient selection. The primer sequences of all chromosome-specific SSRs were also made publicly available.

Conclusion

Chromosome-specific SSRs are efficient tools for chromosome identification by anchoring linkage groups to particular chromosomes during genetic mapping and are especially useful in mapping of qualitative-trait genes or quantitative trait loci with just a few markers. The SSRs reported here will facilitate a number of genetic and genomic studies in cotton, including construction of high-density genetic maps, positional gene cloning, fingerprinting, and genetic diversity and comparative evolutionary analyses among Gossypium species.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1265-2) contains supplementary material, which is available to authorized users.     

Development and Application of a Whole-Genome Simple Sequence Repeat Panel for High-Throughput Genotyping in Soybean

Among commonly applied molecular markers, simple sequence repeats (SSRs, or microsatellites) possess advantages such as a high level of polymorphism and codominant pattern of inheritance at individual loci. To facilitate systematic and rapid genetic mapping in soybean, we designed a genotyping panel comprised 304 SSR markers selected for allelic diversity and chromosomal location so as to provide wide coverage. Most primer pairs for the markers in the panel were redesigned to yield amplicons of 80–600 bp in multiplex polymerase chain reaction (PCR) and fluorescence-based sequencer analysis, and they were labelled with one of four different fluorescent dyes. Multiplex PCR with sets of six to eight primer pairs per reaction generated allelic data for 283 of the 304 SSR loci in three different mapping populations, with the loci mapping to the same positions as previously determined. Four SSRs on each chromosome were analysed for allelic diversity in 87 diverse soybean germplasms with four-plex PCR. These 80 loci showed an average allele number and polymorphic information content value of 14.8 and 0.78, respectively. The high level of polymorphism, ease of analysis, and high accuracy of the SSR genotyping panel should render it widely applicable to soybean genetics and breeding.     

The role of induced mutation in conversion of photoperiod dependence in cotton

Wild cotton germplasm resources are largely underutilized because of photoperiod-dependent flowering of "exotic" cottons. The objectives of this work were to explore the genome-wide effect of induced mutation in photoperiod-converted induced cotton mutants, estimating the genetic change between mutant and wild-type cottons using simple sequence repeats (SSRs) as well as understand the pattern of SSR mutation in induced mutagenesis. Three groups of photoperiod-converted radiomutants ((32)P) including their wild-type parental lines, A- and D-genome diploids, and typically grown cotton cultivars were screened with 250 cotton SSR primer pairs. Forty SSRs revealed the same SSR mutation profile in, at least, 2 independent mutant lines that were different from the original wild types. Induced mutagenesis both increased and decreased the allele sizes of SSRs in mutants with the higher mutation rate in SSRs containing dinucleotide motifs. Genetic distance obtained based on 141 informative SSR alleles ranged from 0.09 to 0.60 in all studied cotton genotypes. Genetic distance within all photoperiod-converted induced mutants was in a 0.09-0.25 range. The genetic distance among photoperiod-converted mutants and their originals ranged from 0.28 to 0.50, revealing significant modification of mutants from their original wild types. Typical Gossypium hirsutum cultivar, Namangan-77, revealed mutational pattern similar to induced radiomutants in 40 mutated SSR loci, implying possible pressure to these SSR loci not only in radiomutagenesis but also during common breeding process. Outcomes of the research should be useful in understanding the photoperiod-related mutations, and markers might help in mapping photoperiodic flowering genes in cotton.     

Highly variable SSR markers in Douglas-fir: Mendelian inheritance and map locations

Twenty-two highly variable SSR markers were developed in Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco] from five SSR-enriched genomic libraries. Fifteen PCR primer pairs amplified a single codominant locus, while seven primer pairs occasionally amplified two loci. The Mendelian inheritance of all 22 SSRs was confirmed via segregation analyses in several Douglas-fir families. The mean observed heterozygosity and the mean number of alleles per locus were 0.855 (SE=0.020) and 23 (SE=1.6), respectively. Twenty markers were used in genetic linkage analysis and mapped to ten known linkage groups. Because of their high polymorphism and unambiguous phenotypes, 15 single-locus markers were selected as the most suitable for DNA fingerprinting and parentage analysis. Only three SSRs were sufficient to achieve an average probability of exclusion from paternity of 0.998 in a Douglas-fir seed orchard block consisting of 59 parents.Communicated by O. Savolainen     

普通小麦SSR和EST-SSR引物对冰草通用性的比较分析

选用定位于普通小麦7个部分同源群的534对SSR引物和351对EST-SSR引物分别对普通小麦品种‘Fukuho’和四倍体冰草‘Z559’的基因组DNA进行扩增,结果显示:有475对(89.0%)SSR引物和314对(89.5%)EST-SSR引物对‘Fukuho’能有效扩增,226对(42.3%)SSR和258对(73.5%)EST-SSR引物对‘Z559’能有效扩增,表明小麦EST-SSR对冰草的通用性明显高于SSR;扩增强带比率SSR和EST-SSR引物分别为76.1%、84.1%,说明小麦EST-SSR在冰草上扩增带的质量亦优于SSR。选择上述在‘Fukuho’和‘Z559’基因组DNA之间有多态性扩增且带谱清晰的SSR和EST-SSR引物各60对,对‘Fukuho’、‘中国春’、‘北京8号’和二、四、六倍体冰草‘Z804’、‘Z559’、‘Z1075’的基因组DNA再行PCR扩增,结果显示,40对(66.7%)SSR和22对(36.7%)EST-SSR引物在‘Fukuho’、‘中国春’和‘北京8号’间扩增产物表现多态性,且前者高于后者;50对(83.3%)SSR和52对(86.7%)EST-SSR引物在冰草‘Z804’、‘Z559’和‘Z1075’间扩增产物表现多态性,两者相当。通用性、多态性和扩增强带比率综合比较表明,普通小麦EST-SSR和SSR经筛选虽都能转用于冰草,但两者相比EST-SSR更优。     

Development of soybean aphid genomic SSR markers using next generation sequencing

Simple sequence repeats (SSRs) or microsatellites are very useful molecular markers, owing to their locus-specific codominant and multiallelic nature, high abundance in the genome, and high rates of transferability across species. The soybean aphid (Aphis glycines Matsumura) has become the most damaging insect pest of soybean (Glycine max (L.) Merr.) in North America, since it was first found in the Midwest of the United States in 2000. Biotypes of the soybean aphid capable of colonizing newly developed aphid-resistant soybean cultivars have been recently discovered. Genetic resources, including molecular markers, to study soybean aphids are severely lacking. Recently developed next generation sequencing platforms offer opportunities for high-throughput and inexpensive genome sequencing and rapid marker development. The objectives of this study were (i) to develop and characterize genomic SSR markers from soybean aphid genomic sequences generated by next generation sequencing technology and (ii) to evaluate the utility of the SSRs for genetic diversity or relationship analyses. In total 128 SSR primer pairs were designed from sequences generated by Illumina GAII from a reduced representation library of A. glycines. Nearly 94% (120) of the primer pairs amplified SSR alleles of expected size and 24 SSR loci were polymorphic among three aphid samples from three populations. The polymorphic SSRs were successfully used to differentiate among 24 soybean aphids from Ohio and South Dakota. Sequencing of PCR products of two SSR markers from four aphid samples revealed that the allelic polymorphism was due to variation in the SSR repeats among the aphids. These markers should be particularly useful for genetic differentiation among aphids collected from soybean fields at different localities and regions. These SSR markers provide the soybean aphid research community with the first set of PCR-based codominant markers developed from the genomic sequences of A. glycines.     

A genetic map of an Australian wild Gossypium C genome and assignment of homoeologies with tetraploid cultivated cotton

Genetic diversity for traits such as fibre quality or disease resistance to microorganisms is limited in the elite cotton germplasm; consequently, cotton breeders are looking for novel alleles in the secondary or even in the tertiary gene pools. The wild Australian Gossypium species (tertiary gene pool) represent an alternative source of novel alleles. However, to use these species efficiently, enabling tools are required. Chromosome-specific molecular markers are particularly useful tools to track the transmission of this exotic genetic material into the cultivated cotton during introgression. In this study, we report the construction of a genetic linkage map of the Australian wild C-genome species Gossypium sturtianum. The map, based on an F(2) population of 114 individuals, contains 291 AFLP loci. The map spans 1697 cM with an average distance of 5.8 cM between markers. To associate C-genome chromosomes with the A and D subgenomes of cultivated cotton, 29 SSR and RFLP-STS markers were assigned to chromosomes using cultivated cotton mapped marker information. Polymorphisms were revealed by 51 AFLP primer combinations and 38 RFLP-STS and 115 SSR cotton mapped markers. The utility of transferring RFLP-STS and SSR cotton mapped markers to other Gossypium species shows the usefulness of a comparative approach as a source of markers and for aligning the genetic map of G. sturtianum with the cultivated species in the future. This also indicates that the overall structure of the G. sturtianum linkage groups is similar to that of the A and D subgenomes of cotton at the gross structural level. Applications of the map for the Australia wild C-genome species and cotton breeding are discussed.     

SSR-based linkage map with new markers using an intraspecific population of common wheat

Simple sequence repeats (SSRs) are valuable molecular markers in many plant species. In common wheat (Triticum aestivum L.), which is characteristic of its large genomes and alloploidy, SSRs are one of the most useful markers. To increase SSR marker sources and construct an SSR-based linkage map of appropriate density, we tried to develop new SSR markers from SSR-enriched genomic libraries and the public database. SSRs having (GA)n and (GT)n motifs were isolated from enriched libraries, and di- and tri-nucleotide repeats were mined from expressed sequence tags (ESTs) and DNA sequences of Triticum species in the public database. Of the 1,147 primer pairs designed, 842 primers gave accurate amplification products, and 478 primers showed polymorphism among the nine wheat lines examined. Using a doubled haploid (DH) population from an intraspecific cross between Kitamoe and Münstertaler (KM), we constructed an SSR-based linkage map that consisted of 464 loci: 185 loci from genomic libraries, 65 loci from the sequence database including ESTs, 213 loci from the SSR markers already reported, and 1 locus of morphological marker. Although newly developed SSR loci were distributed throughout all chromosomes, clustering of them around putative centromeric regions was found on several chromosomes. The total length of the KM map spanned 3,441 cM and corresponded to approximately 86% genome coverage. The KM map comprised of 23 linkage groups because two gaps of over 50 cM distance remained on chromosome 6A. This is a first report of SSR-based linkage map using single intraspecific population of common wheat. This mapping result suggests that it becomes possible to construct linkage maps with sufficient genome coverage using only SSR markers without RFLP markers, even in an intraspecific population of common wheat. Moreover, the new SSR markers will contribute to the enrichment of molecular marker resources in common wheat.