Validity of a New Abdominal Bioelectrical Impedance Device to Measure Abdominal and Visceral Fat: Comparison With MRI

Abdominal fat, and in particular, visceral adipose tissue (VAT), is the critical fat depot associated with metabolic aberrations. At present, VAT can only be accurately measured by computed tomography or magnetic resonance imaging (MRI). This study was designed to compare a new abdominal bioelectrical impedance (BIA) device against total abdominal adipose tissue (TAAT) and VAT area measurements made from an abdominal MRI scan, and to assess its reliability and accuracy. One‐hundred twenty participants were recruited, stratified by gender and BMI. Participants had triplicate measures of abdominal fat and waist circumference (WC) with the AB‐140 (Tanita, Tokyo, Japan) and WC measurements using a manual tape measure. A single abdominal MRI scan was performed as the reference method. Triplicate measures with the AB‐140 showed excellent precision for “visceral fat level,” trunk fat %, and WC. AB‐140 “visceral fat level” showed significantly stronger correlations with MRI TAAT area than with MRI VAT area (r = 0.94 vs. 0.65 in men and 0.92 vs. 0.64 in women). AB‐140 WC showed good correlation with manual WC measurements (r = 0.95 in men and 0.90 in women). AB‐140 and manual WCs showed comparable correlations with MRI TAAT area (r = 0.92 and 0.96 in men and 0.88 and 0.88 in women). AB‐140 is a simple, quick, and precise technique to measure abdominal fat and WC in healthy adults. It provides a useful proxy for TAAT measured by MRI, comparable to the correlation obtained with manual WC measurements. Neither the AB‐140 abdominal fat measures nor WC measurement appear to provide a useful proxy measure of VAT.     

Absence of radiofrequency heating from auditory implants during magnetic resonance imaging

The possibility of tissue heating due to an auditory brainstem implant (ABI) or a modified cochlear implant (CI) during magnetic resonance imaging (MRI) of the head was tested on a full-sized human phantom using a realistic phantom head consisting of simulated skull, brain, and muscle. Dielectric properties of the brain, muscle, and bone materials were similar to those of human tissues at 64 MHz. The body consisted of homogeneous phantom muscle enclosed in a human-shaped fiberglass shell. Thermographic and fiber-optic temperature measurements were conducted to reveal any heating. Thermograms of sagittal, frontal, and horizontal planes of the head with the ABI and CI electrodes were taken immediately before and after a 26 min MRI scan. The MRI sequence was set at 94 excitations and 25 ms echo time to induce maximum radiofrequency heating, as suggested by the General Electric Company. The difference of these two thermograms gives the heating results. In two uncut phantom heads, Teflon tubes were placed along the implanted ABI and CI, and temperature data were recorded via fiber-optic probes before, during, and after the MRI. Results showed no observable heating associated with the ABI and the modified CI during worst-case MRI of the head. © 1995 Wiley-Liss, Inc.     

Prediction and assessment of the time-varying effective pulmonary vein area via cardiac MRI and Doppler echocardiography

Accurately estimating left atrial (LA) volume with Doppler echocardiography remains challenging. Using angiography for validation, Marino et al. (Marino P, Prioli AM, Destro G, LoSchiavo I, Golia G, and Zardini P. Am Heart J 127: 886-898, 1994) determined LA volume throughout the cardiac cycle by integrating the velocity-time integrals of Doppler transmitral and pulmonary venous flow, assuming constant mitral valve and pulmonary vein areas. However, this LA volume determination method has never been compared with three-dimensional LA volume data from cardiac MRI, the gold standard for cardiac chamber volume measurement. Previously, we determined that the effective mitral valve area is not constant but varies as a function of time. Therefore, we sought to determine whether the effective pulmonary vein area (EPVA) might be time varying as well and also assessed Marino's method for estimating LA volume. We imaged 10 normal subjects using cardiac MRI and concomitant transthoracic Doppler echocardiography. LA and left ventricular (LV) volumes were measured by MRI, transmitral and pulmonary vein flows were measured by Doppler echocardiography, and time dependence was synchronized via the electrocardiogram. LA volume, estimated using Marino's method, was compared with the MRI measurements. Differences were observed, and the discrepancy between the echocardiographic and MRI methods was used to predict EPVA as a function of time. EPVA was also directly measured from short-axis MRI images and was found to be time varying in concordance with predicted values. We conclude that because EPVA and LA volume time dependence are in phase, LA filling in systole and LV filling in diastole are both facilitated. Application to subjects in select pathophysiological states is in progress.     

Internal mechanical conditions in the soft tissues of a residual limb of a trans-tibial amputee

Most trans-tibial amputation (TTA) patients use a prosthesis to retain upright mobility capabilities. Unfortunately, interaction between the residual limb and the prosthetic socket causes elevated internal strains and stresses in the muscle and fat tissues in the residual limb, which may lead to deep tissue injury (DTI) and other complications. Presently, there is paucity of information on the mechanical conditions in the TTA residual limb during load-bearing. Accordingly, our aim was to characterize the mechanical conditions in the muscle flap of the residual limb of a TTA patient after donning the prosthetic socket and during load-bearing. Knowledge of internal mechanical conditions in the muscle flap can be used to identify the risk for DTI and improve the fitting of the prosthesis. We used a patient-specific modelling approach which involved an MRI scan, interface pressure measurements between the residual limb and the socket of the prosthesis and three-dimensional non-linear large-deformation finite-element (FE) modelling to quantify internal soft tissue strains and stresses in a female TTA patient during static load-bearing. Movement of the truncated tibia and fibula during load-bearing was measured by means of MRI and used as displacement boundary conditions for the FE model. Subsequently, we calculated the internal strains, strain energy density (SED) and stresses in the muscle flap under the truncated bones. Internal strains under the tibia peaked at 85%, 129% and 106% for compression, tension and shear strains, respectively. Internal strains under the fibula peaked at substantially lower values, that is, 19%, 22% and 19% for compression, tension and shear strains, respectively. Strain energy density peaked at the tibial end (104kJ/m(3)). The von Mises stresses peaked at 215kPa around the distal end of the tibia. Stresses under the fibula were at least one order of magnitude lower than the stresses under the tibia. We surmise that our present patient-specific modelling method is an important tool in understanding the etiology of DTI in the residual limbs of TTA patients.     

Comparison of glottic areas measured by acoustic reflections vs. computerized tomography

We compared measurements of glottic area obtained by acoustic reflection technique with anatomically equivalent area measured from computerized tomographic (CT) scans of the neck in 11 subjects with glottic pathology. Both measurements were performed in the supine position during tidal breathing at functional residual capacity. We found excellent agreement in glottic areas obtained by both methods: the mean (+/- SD) values were 1.8 +/- 0.8 cm2 for the acoustic method and 1.7 +/- 0.9 cm2 for the CT method. Linear regression analysis revealed the following relationship between the area measured by acoustic technique (AAC) and that measured by CT (ACT): AAC = 0.81.ACT + 0.36. There was a significant correlation between the two measurements of glottic area (r = 0.95, P less than 0.0001). We conclude that the acoustic reflection technique may be used reliably in clinical and physiological studies concerned with glottic geometry.     

Local perfusion and metabolic demand during exercise: a noninvasive MRI method of assessment.

A noninvasive magnetic resonance imaging (MRI) method to assess the distribution of perfusion and metabolic demand (Q/VO(2)) in exercising human skeletal muscle is described. This method combines two MRI techniques that can provide accurate multiple localized measurements of Q/VO(2) during steady-state plantar flexion exercise. The first technique, (31)P chemical shift imaging, permits the acquisition of comparable phosphorus spectra from multiple voxels simultaneously. Because phosphocreatine (PCr) depletion is directly proportional to ATP hydrolysis, its relative depletion can be used as an index of muscle O(2) uptake (VO(2)). The second MRI technique allows the measurement of both spatially and temporally resolved muscle perfusion in vivo by using arterial spin labeling. Promising validity and reliability data are presented for both MRI techniques. Initial results from the combined method provide evidence of a large variation in Q/VO(2), revealing areas of apparent under- and overperfusion for a given metabolic turnover. Analysis of these data in a similar fashion to that employed in the assessment of ventilation-to-perfusion matching in the lungs revealed a similar second moment of the perfusion distribution and PCr distribution on a log scale (log SD(Q) and log SD(PCr)) (0.47). Modeling the effect of variations in log SD(Q) and log SD(PCr) in terms of attainable VO(2), assuming no diffusion limits, indicates that the log SD(Q) and log SD(PCr) would allow only 92% of the target VO(2) to be achieved. This communication documents this novel, noninvasive method for assessing Q/VO(2), and initial data suggest that the mismatch in Q/VO(2) may play a significant role in determining O(2) transport and utilization during exercise.     

Breast volume assessment based on 3D surface geometry: verification of the method using MR imaging

Differences in breast volume and contour are subjectively estimated by surgeons. 3D surface imaging using 3D scanners provides objective breast volume quantification, but precision and accuracy of the method requires verification. Breast volumes of five test individuals were assessed using a 3D surface scanner. Magnetic resonance imaging (MRI) reference volumes were obtained to verify and compare the 3D scan measurements. The anatomical thorax wall curvature was segmented using MRI data and compared to the interpolated curvature of the posterior breast volume delimitation of 3D scan data. MRI showed higher measurement precision, mean deviation (expressed as percentage of volume) of 1.10+/-0.34% compared to 1.63+/-0.53% for the 3D scanner. Mean MRI [right (left) breasts: 638 (629)+/-143 (138) cc] and 3D scan [right (left) breasts: 493 (497)+/-112 (116) cc] breast volumes significantly correlated [right (left) breasts: r=0.982 (0.977), p=0.003 (0.004)]. The posterior thorax wall of the 3D scan model showed high agreement with the MRI thorax wall curvature [mean positive (negative) deviation: 0.33 (-0.17)+/-0.37 cm]. High correspondence and correlation of 3D scan data with MRI-based verifications support 3D surface imaging as sufficiently precise and accurate for breast volume measurements.     

A new nasal acoustic reflection technique to estimate pharyngeal cross-sectional area during sleep.

The conventional acoustic reflection technique in which acoustic waves are launched through the mouth cannot be applied during sleep, nor can it be applied to the nasopharynx, which is the major site of occlusion in patients with obstructive sleep apnea syndrome. We propose a new technique of nasal acoustic reflection to measure pharyngeal cross-sectional areas including the nasopharynx. The acoustic waves are introduced simultaneously to both nostrils during spontaneous nasal breathing. A new algorithm takes into account the nasal septum with asymmetric nasal cavities on both sides and assumes prior knowledge of the cross-sectional area of the nasal cavities and the position of the nasal septum. This method was tested on an airway model with a septum and on healthy human subjects. The conventional technique gave inaccurate measurements for pharyngeal cross-sectional areas for an airway model with asymmetric branching, whereas the new technique measured them almost perfectly. The oro- and hypopharyngeal cross-sectional area measurements acquired by the new method were not different from those obtained by the conventional method in normal subjects. This new method can be used as a monitor of upper airway dimensions in nocturnal polysomnography.     

Validity of estimating limb muscle volume by bioelectrical impedance.

The present study aimed to investigate the validity of estimating muscle volume by bioelectrical impedance analysis. Bioelectrical impedance and series cross-sectional images of the forearm, upper arm, lower leg, and thigh on the right side were determined in 22 healthy young adult men using a specially designed bioelectrical impedance acquisition system and magnetic resonance imaging (MRI) method, respectively. The impedance index (L(2)/Z) for every segment, calculated as the ratio of segment length squared to the impedance, was significantly correlated to the muscle volume measured by MRI, with r = 0.902-0.976 (P < 0.05). In these relationships, the SE of estimation was 38.4 cm(3) for the forearm, 40.9 cm(3) for the upper arm, 107.2 cm(3) for the lower leg, and 362.3 cm(3) for the thigh. Moreover, isometric torque developed in elbow flexion or extension and knee flexion or extension was significantly correlated to the L(2)/Z values of the upper arm and thigh, respectively, with correlation coefficients of 0.770-0.937 (P < 0.05), which differed insignificantly from those (0.799-0.958; P < 0.05) in the corresponding relationships with the muscle volume measured by MRI of elbow flexors or extensors and knee flexors or extensors. Thus the present study indicates that bioelectrical impedance analysis may be useful to predict the muscle volume and to investigate possible relations between muscle size and strength capability in a limited segment of the upper and lower limbs.     

Combining position and acceleration measurements for joint force estimation

The calculation of joint forces in biomechanics is usually based on the measurements of the kinematics of a given body segment, the estimation of the inertial properties of that segment and the solution of the ‘inverse dynamics problem’. Such a process results in estimates of the joint forces and moments needed to sustain the monitored motion. This paper presents a new approach that combines position and acceleration measurements for the purpose of deriving high-quality joint force estimates. An experimental system that is based on an instrumented compound pendulum was designed and tested. The joint forces necessary to maintain a swinging motion of the pendulum were measured by an array of strain gauges, and were compared to the forces estimated by the integrated kinematic segment that measured the position and acceleration of the pendulum. The joint force measurements were also compared to the force estimates that were based on the calculated segmental acceleration generated by the differentiation of the segmental position alone. The results show a high degree of correlation between the forces estimated by the integrated segment and those measured by the strain gauges. The force estimates based on the position measurements alone were less accurate and noisier. The application of the integrated segment to the study of human kinetics is discussed and illustrated by the ankle and knee forces during slow walking. The results suggest that the use of accelerometers is necessary for the estimation of transients and high-frequency components of joint forces.     

Measuring morphological parameters of the pelvic floor for finite element modelling purposes

The goal of this study was to obtain a complete data set needed for studying the complex biomechanical behaviour of the pelvic floor muscles using a computer model based on the finite element (FE) theory. The model should be able to predict the effect of surgical interventions and give insight into the function of pelvic floor muscles. Because there was a lack of any information concerning morphological parameters of the pelvic floor muscle structures, we performed an experimental measurement to uncover those morphological parameters. Geometric parameters as well as muscle parameters of the pelvic floor muscles were measured on an embalmed female cadaver. A three-dimensional (3D) geometric data set of the pelvic floor including muscle fibre directions was obtained using a palpator device. A 3D surface model based on the experimental data, needed for mathematical modelling of the pelvic floor, was created. For all parts of the diaphragma pelvis, the optimal muscle fibre length was determined by laser diffraction measurements of the sarcomere length. In addition, other muscle parameters such as physiological cross-sectional area and total muscle fibre length were determined. Apart from these measurements we obtained a data set of the pelvic floor structures based on nuclear magnetic resonance imaging (MRI) on the same cadaver specimen. The purpose of this experiment was to discover the relationship between the MRI morphology and geometrical parameters obtained from the previous measurements. The produced data set is not only important for biomechanical modelling of the pelvic floor muscles, but it also describes the geometry of muscle fibres and is useful for functional analysis of the pelvic floor in general. By the use of many reference landmarks all these morphologic data concerning fibre directions and optimal fibre length can be morphed to the geometrical data based on segmentation from MRI scans.These data can be directly used as an input for building a mathematical model based on FE theory.     

Effects of testosterone on a sexually dimorphic frog muscle: Repeated in vivo observations and androgen receptor distribution

In the present study the sexually dimorphic, androgen-sensitive flexor carpi radialis muscle (FCR) in male Xenopus laevis was viewed repeatedly in vivo to assess the influence of testosterone on muscle fiber size over a period of up to 12 weeks. Regions of the muscle innervated by different spinal nerves responded differently to testosterone treatment. Muscle fibers innervated by spinal nerve 2 (SN2) hypertrophied within 7 days in frogs that had been castrated and given testosterone-filled implants. This initial hypertrophy was followed by a return to normal fiber size a week late, after which fiber size slowly increased again. In castrated males with empty implants, muscle fibers innervated by SN2 gradually atrophied. Fibers innervated by spinal nerve 3 (SN3) were not affected by androgen replacement or withdrawal. The sartorius, a control muscle that is neither sexually dimorphic nor particularly androgen sensitive, was also unaffected. The in vivo observations were confirmed by measurements of muscle fiber cross-sectional areas in frozen sections of whole forelimbs. At 8 and 12 weeks after castration, cross-sectional areas of fibers innervated by SN2 were significantly larger in frogs provided with testosterone than in castrates without testosterone. No difference was found in the SN2 region or in the anconeus caput scapulare (triceps), another control muscle. Immunocytochemistry employing an antibody against the androgen receptor (AR) indicated that the receptor is present in myonuclei of all muscles of the forelimb. While no difference in labeling intensity was detected, the number of AR-containing nuclei per muscle fiber cross-section was higher in fibers innervated by SN2 than in those innervated by SN3, and was yet lower in the triceps. This suggests that regulation of androgen sensitivity may occur via muscle fiber. ARs, although an influence of the nerve may also contribute. 1994 John Wiley & Sons, Inc.     

Quantification of Intermuscular Adipose Tissue in the Erector Spinae Muscle by MRI: Agreement With Histological Evaluation

Deposition of fat between skeletal muscle bundles and beneath the muscle fascia, recently called intermuscular adipose tissue (IMAT), is gaining attention as potential contributor to insulin resistance, metabolic syndrome, muscle function impairment, and disability. The aim of this study was to compare IMAT as measured at the erector spinae level by magnetic resonance imaging (MRI), a well‐recognized gold standard method to evaluate fat content inside muscles, and histology estimates. In 18 healthy elderly men and women with a wide range of BMI (25.05–35.58 kg/m²), undergoing elective vertebral surgery, IMAT within the erector spinae muscle was evaluated by MRI, by body composition using dual‐energy X‐ray absorptiometry and histological evaluation of intraoperative biopsy sample. The concordance between IMAT/total area (TA) ratio evaluated by MRI and histological examination was analyzed employing Lin's concordance correlation coefficient and the procedure proposed by Bland and Altman. Two thresholds to distinguish between muscle and IMAT calculated, respectively, by 20 and 10% reduction of the gray‐level intensity evaluated by MRI from surrounding subcutaneous adipose tissue (SAT) were used. With a 20% reduction, calculated IMAT/TA as evaluated by MRI on average exceeds histological evaluation by 21.79%, whereas by reducing the threshold by 10% agreement between MRI and histology improved with a 12.42% difference. Our data show a good degree of concordance between IMAT assessment by MRI and histology and seems to show that agreement between the two methods could be improved by using a more restrictive threshold between muscle and fat.     

Short-term repeatability of parameters extracted from radial displacement of muscle belly.

The aim of this study is to analyse the short-term repeatability of the parameters extracted from radial muscle belly response on a stimulation pulse. The method uses a prefixed tension of a displacement sensor tip to the muscle and is being developed for noninvasive and selective evaluation of skeletal muscle contraction properties. Five parameters were extracted and statistically evaluated from the measured displacement: maximal displacement, delay time, contraction time, sustain time and half relaxation time. Care has been taken to leave sufficient time between stimulation pulses in order to reduce the effect of muscle fatigue and a constant pre-tension was assured by controlled step motor in consecutive measurement by withdrawal and anew placement of the sensor to the muscle belly after each measurement. Intra-class correlation coefficient (ICC) and normalized squared error (NSEM) were used as measures of short-term repeatability and accuracy (precision) of the measurements while fatigue rate was evaluated using area ratio fatigue index and normalized slope. All five measured parameters have been found highly repeatable (ICC from 0.86 to 0.98) and can be measured with high precision (NSEM from 0.43 to 1.93). Maximal displacement and half relaxation time show largest influence to muscle fatigue rate and are also expected to be the best measure of the fatigue rate. This investigation should serve as an initial study of repeatability of the presented method that should help in subsequent investigations and use of the method.     

Quantification of red myotomal muscle volume and geometry in the shortfin mako shark (Isurus oxyrinchus) and the salmon shark (Lamna ditropis) using T1-weighted magnetic resonance imaging

T1-weighted magnetic resonance imaging (MRI) in conjunction with image and segmentation analysis (i.e., the process of digitally partitioning tissues based on specified MR image characteristics) was evaluated as a noninvasive alternative for differentiating muscle fiber types and quantifying the amounts of slow, red aerobic muscle in the shortfin mako shark (Isurus oxyrinchus) and the salmon shark (Lamna ditropis). MRI-determinations of red muscle quantity and position made for the mid-body sections of three mako sharks (73.5-110 cm fork length, FL) are in close agreement (within the 95% confidence intervals) with data obtained for the same sections by the conventional dissection method involving serial cross-sectioning and volumetric analyses, and with previously reported findings for this species. The overall distribution of salmon shark red muscle as a function of body fork length was also found to be consistent with previously acquired serial dissection data for this species; however, MR imaging revealed an anterior shift in peak red muscle cross-sectional area corresponding to an increase in body mass. Moreover, MRI facilitated visualization of the intact and anatomically correct relationship of tendon linking the red muscle and the caudal peduncle. This study thus demonstrates that MRI is effective in acquiring high-resolution three-dimensional digital data with high contrast between different fish tissue types. Relative to serial dissection, MRI allows more precise quantification of the position, volume, and other details about the types of muscle within the fish myotome, while conserving specimen structural integrity.     

MRI-based modeling for evaluation of in vivo contact mechanics in the human wrist during active light grasp

Investigations of in vivo joint mechanics are important for understanding the joint function under functional loading and the mechanisms of pathology. In this study we used magnetic resonance imaging (MRI) based joint contact modeling to evaluate in vivo joint contact mechanics in the human wrist. MRI scans were performed on the wrists of four subjects while they maintained light grasp of a cylinder, and with the same wrist relaxed. 3D models of the radius, scaphoid and lunate, including cartilage surface data, were constructed from the relaxed image data. These models were transformed into the loaded configuration, as determined from the grasp image data, and contact mechanics were evaluated. The resulting contact pressures, areas and forces were then analyzed for each articulation and for each subject. Contact areas were measured directly from grasp MRI images for comparison to the model predictions. The first-ever estimates for in vivo radioscaphoid and radiolunate contact pressure agreed reasonably well with previous cadaveric studies. This investigation also produced novel in vivo scapholunate contact results that were similar to radiolunate data. The specimen-specific contact area comparison generally showed substantial variability between the models and the direct measurements from MRI. On average, the models were within about 10% of the direct MRI measurements for radioscaphoid and scapholunate contact areas, but radiolunate contact areas from the model were only within 55% of the direct measurements. Overall, the results of the study suggest that MRI-based modeling has substantial potential for evaluation of in vivo joint contact mechanics, especially as technology and methodology improve.     

MRI-based characterization of bone anatomy in the human knee for size matching of a medial meniscal implant

Allograft or synthetic menisci have been suggested as a means to restore contact pressures following meniscectomy. However, when the natural meniscus is severely damaged/absent, the necessary size cannot be determined according to the recipient size and there is a need to estimate it from magnetic resonance imaging (MRI) of the contralateral knee or the injured knee bones. The use of the contralateral-knee for size matching is problematic due to economic and practical reasons. Hence, there are significant advantages for a sizing algorithm based only on the candidate knee geometry. The aim of this study is to characterize midrange values and variability of knee dimensions and to develop a set of mathematical relations representing knee dimensions using a minimum of imaging-based bone measurements. Tibia, femur, and meniscus measurements were taken in 118 MRI scans and used to develop a representative parametric knee model in which all dimensions are expressed using tibia plateau width. The model was verified by comparing the predicted values to direct MRI measurements for 20 additional subjects by means of the Pearson correlation and Bland and Altman (1986, "Statistical Methods for Assessing Agreement Between Two Methods of Clinical Measurement," Lancet, 1, pp. 307-310) plot. Anatomical parameters in the male knee were significantly larger (～17%) compared with corresponding female measurements. However, most relations between tibia, femur, and meniscus measurements (43/56) were not significantly different between male and female populations (p ≥ 0.05), indicating that differences between male and female joints are generally related to scaling and not shape. Dimensions predicted by the knee model were in a good agreement with dimensions measured directly from the MRI (R(2)>0.96) and the Bland and Altman plot indicated that ～95% of data points were well within the ± 2 standard deviation lines of agreement. The model proposed in this study is advantageous in being able to describe typical knee proportions for a given tibial width and can be used to predict the dimensions of a candidate knee based on a single measurement. The anatomical/anthropometric data presented in the study can be utilized in a sizing algorithm for artificial meniscal implants or in the design of artificial meniscus prostheses.     

In vivo MRI quantification of individual muscle and organ volumes for assessment of anabolic steroid growth effects

This study aimed to develop a quantitative and in vivo magnetic resonance imaging (MRI) approach to investigate the muscle growth effects of anabolic steroids. A protocol of MRI acquisition on a standard clinical 1.5 T scanner and quantitative image analysis was established and employed to measure the individual muscle and organ volumes in the intact and castrated guinea pigs undergoing a 16-week treatment protocol by two well-documented anabolic steroids, testosterone and nandrolone, via implanted silastic capsules. High correlations between the in vivo MRI and postmortem dissection measurements were observed for shoulder muscle complex (R=0.86), masseter (R=0.79), temporalis (R=0.95), neck muscle complex (R=0.58), prostate gland and seminal vesicles (R=0.98), and testis (R=0.96). Furthermore, the longitudinal MRI measurements yielded adequate sensitivity to detect the restoration of growth to or towards normal in castrated guinea pigs by replacing circulating steroid levels to physiological or slightly higher levels, as expected. These results demonstrated that quantitative MRI using a standard clinical scanner provides accurate and sensitive measurement of individual muscles and organs, and this in vivo MRI protocol in conjunction with the castrated guinea pig model constitutes an effective platform to investigate the longitudinal and cross-sectional growth effects of other potential anabolic steroids. The quantitative MRI protocol developed can also be readily adapted for human studies on most clinical MRI scanner to investigate the anabolic steroid growth effects, or monitor the changes in individual muscle and organ volume and geometry following injury, strength training, neuromuscular disorders, and pharmacological or surgical interventions.     

Multi-Parametric MRI at 14T for Muscular Dystrophy Mice Treated with AAV Vector-Mediated Gene Therapy

The objective of this study was to investigate the efficacy of using quantitative magnetic resonance imaging (MRI) as a non-invasive tool for the monitoring of gene therapy for muscular dystrophy. The clinical investigations for this family of diseases often involve surgical biopsy which limits the amount of information that can be obtained due to the invasive nature of the procedure. Thus, other non-invasive tools may provide more opportunities for disease assessment and treatment responses. In order to explore this, dystrophic mdx^4cv mice were systemically treated with a recombinant adeno-associated viral (AAV) vector containing a codon-optimized micro-dystrophin gene. Multi-parametric MRI of T2, magnetization transfer, and diffusion effects alongside 3-D volume measurements were then utilized to monitor disease/treatment progression. Mice were imaged at 10 weeks of age for pre-treatment, then again post-treatment at 8, 16, and 24 week time points. The efficacy of treatment was assessed by physiological assays for improvements in function and quantification of expression. Tissues from the hindlimbs were collected for histological analysis after the final time point for comparison with MRI results. We found that introduction of the micro-dystrophin gene restored some aspects of normal muscle histology and pathology such as decreased necrosis and resistance to contraction-induced injury. T2 relaxation values showed percentage decreases across all muscle types measured (tibialis anterior, gastrocnemius, and soleus) when treated groups were compared to untreated groups. Additionally, the differences between groups were statistically significant for the tibialis anterior as well. The diffusion measurements showed a wider range of percentage changes and less statistical significance while the magnetization transfer effect measurements showed minimal change. MR images displayed hyper-intense regions of muscle that correlated with muscle pathology in histological sections. T2 relaxation, alongside diffusion and magnetization transfer effects provides useful data towards the goal of non-invasively monitoring the treatment of muscular dystrophy.     

Immobilization of the rabbit tibialis anterior muscle in a lengthened position causes addition of sarcomeres in series and extra-cellular matrix proliferation

Rabbits were immobilized for 3 weeks with the ankle in plantar flexion, midrange position or dorsal extension (n=15). The left leg was used as control. Sarcomere lengths were measured by laser diffraction in vivo in the tibialis anterior (TA) muscle. Legs immobilized in the midrange position showed coherent diffraction patterns through the range of motion, but in those immobilized with TA in the stretched position no diffraction patterns in vivo could be obtained. Morphological analyses revealed increased fibrosis and occurrence of whorled fibers in these muscles. On 15 more likewise immobilized rabbits, a technique of measuring sarcomere lengths in vitro by first digesting the collagen in nitric acid was developed. These in vitro measurements showed shorter sarcomeres in the muscles immobilized in a lengthened position compared to the control, indicating an addition of sarcomeres in series.