Methods for reducing nonspecific interaction in antibody-antigen assay via atomic force microscopy

We developed a method to measure the rupture forces between antibody and antigen by atomic force microscopy (AFM). Previous studies have reported that in the measurement of antibody–antigen interaction using AFM, the specific intermolecular forces are often obscured by nonspecific adhesive binding forces between antibody immobilized cantilever and substrate surfaces on which antigen or nonantigen are fixed. Here, we examined whether detergent and nonreactive protein, which have been widely used to reduce nonspecific background signals in ordinary immunoassay and immunoblotting, could reduce the nonspecific forces in the AFM measurement. The results showed that, in the presence of both nonreactive protein and detergent, the rupture forces between anti-ferritin antibodies immobilized on a tip of cantilever and ferritin (antigen) on the substrate could be successfully measured, distinguishing from nonspecific adhesive forces. In addition, we found that approach/retraction velocity of the AFM cantilever was also important in the reduction of nonspecific adhesion. These insights will contribute to the detection of specific molecules at nanometer scale region and the investigation of intermolecular interaction by the use of AFM.     

Atomic force microscopy of supported planar membrane bilayers.

Membrane bilayers of dipalmitoyl phosphatidylcholine (DPPC) and dipalmitoyl phosphatidylethanolamine (DPPE) adsorbed to a freshly cleaved mica substrate have been imaged by Atomic Force Microscopy (AFM). The membranes were mounted for imaging by two methods: (a) by dialysis of a detergent solution of the lipid in the presence of the substrate material, and (b) by adsorption of lipid vesicles onto the substrate surface from a vesicle suspension. The images were taken in air, and show lipid bilayers adhering to the surface either in isolated patches or in continuous sheets, depending on the deposition conditions. Epifluorescence light-microscopy shows that the lipid is distributed on the substrate surfaces as seen in the AFM images. In some instances, when DPPE was used, whole, unfused vesicles, which were bound to the substrate, could be imaged by the AFM. Such membranes should be capable of acting as natural anchors for imaging membrane proteins by AFM.     

In situ observation of elementary growth processes of protein crystals by advanced optical microscopy

To start systematically investigating the quality improvement of protein crystals, the elementary growth processes of protein crystals must be first clarified comprehensively. Atomic force microscopy (AFM) has made a tremendous contribution toward elucidating the elementary growth processes of protein crystals and has confirmed that protein crystals grow layer by layer utilizing kinks on steps, as in the case of inorganic and low-molecular-weight compound crystals. However, the scanning of the AFM cantilever greatly disturbs the concentration distribution and solution flow in the vicinity of growing protein crystals. AFM also cannot visualize the dynamic behavior of mobile solute and impurity molecules on protein crystal surfaces. To compensate for these disadvantages of AFM, in situ observation by two types of advanced optical microscopy has been recently performed. To observe the elementary steps of protein crystals noninvasively, laser confocal microscopy combined with differential interference contrast microscopy (LCM-DIM) was developed. To visualize individual mobile protein molecules, total internal reflection fluorescent (TIRF) microscopy, which is widely used in the field of biological physics, was applied to the visualization of protein crystal surfaces. In this review, recent progress in the noninvasive in situ observation of elementary steps and individual mobile protein molecules on protein crystal surfaces is outlined.     

Methods of microorganism immobilization for dynamic atomic-force studies (review)

Atomic-force microscopy (AFM) is an efficient method for studying the surface ultrastructure and nanomechanical properties of biological objects, including microorganisms. A correctly selected method of microorganism immobilization that provides a strong attachment of cells on the surface of a biologically inert substrate and preservation of their native properties is important for AFM scanning in liquid media. Comparative characteristics of methods of microorganism immobilization applied in dynamic AFM studies are discussed in the review. Technologies of mechanical entrapment and chemical binding of cells to a substrate, as well as protein and immunospecific adsorption, are considered.     

RGD-grafted poly-L-lysine-graft-(polyethylene glycol) copolymers block non-specific protein adsorption while promoting cell adhesion

A novel class of surface-active copolymers is described, designed to protect surfaces from nonspecific protein adsorption while still inducing specific cell attachment and spreading. A graft copolymer was synthesized, containing poly-(L-lysine) (PLL) as the backbone and substrate binding and poly(ethylene glycol) (PEG) as protein adsorption-resistant pendant side chains. A fraction of the grafted PEG was pendantly functionalized by covalent conjugation to the peptide motif RGD to induce cell binding. The graft copolymer spontaneously adsorbs from dilute aqueous solution onto negatively charged surfaces. The performance of RGD-modified PLL-g-PEG copolymers was analyzed in protein adsorption and cell culture assays. These coatings efficiently blocked the adsorption of serum proteins to Nb(2)O(5) and tissue culture polystyrene while specifically supporting attachment and spreading of human dermal fibroblasts. This surface functionalization technology is expected to be valuable in both the biomaterial and biosensor fields, because different signals can easily be combined, and sterilization and application are straightforward and cost-effective.     

The investigation of Protein A and Salmonella antibody adsorption onto biosensor surfaces by atomic force microscopy

The investigation of Protein A and antibody adsorption on surfaces in a biological environment is an important and fundamental step for increasing biosensor sensitivity and specificity. The atomic force microscope (AFM) is a powerful tool that is frequently used to characterize surfaces coated with a variety of molecules. We used AFM in conjunction with scanning electron microscopy to characterize the attachment of protein A and its subsequent binding to the antibody and Salmonella bacteria using a gold quartz crystal. The rms roughness of the base gold surface was determined to be approximately 1.30 nm. The average step height change between the solid gold and protein A layer was approximately 3.0 +/- 1.0 nm, while the average step height of the protein A with attached antibody was approximately 6.0 +/- 1.0 nm. We found that the antibodies did not completely cover the protein A layer, instead the attachment follows an island model. Salt crystals and water trapped under the protein A layer were also observed. The uneven adsorption of antibodies onto the biosensor surface might have led to a decrease in the sensitivity of the biosensor. The presence of salt crystals and water under the protein A layer may deteriorate the sensor specificity. In this report, we have discussed the application and characterization of protein A bound to antibodies which can be used to detect bacterial and viral pathogens.     

Atomic force microscopy of three-dimensional membrane protein crystals. Ca-ATPase of sarcoplasmic reticulum.

We have observed three-dimensional crystals of the calcium pump from sarcoplasmic reticulum by atomic force microscopy (AFM). From AFM images of dried crystals, both on graphite and mica, we measured steps in the crystal thickness, corresponding to the unit cell spacing normal to the substrate. It is known from transmission electron microscopy that crystal periodicity in the plane of the substrate is destroyed by drying, and it was therefore not surprising that we were unable to observe this periodicity by AFM. Thus, we were motivated to use the AFM on hydrated crystals. In this case, crystal adsorption appeared to be a limiting factor, and our studies indicate that adsorption is controlled by the composition of the medium and by the physical-chemical properties of the substrate. We used scanning electron microscopy to determine the conditions yielding the highest adsorption of crystals, and, under these conditions, we have obtained AFM images of hydrated crystals with a resolution similar to that observed with dried samples (i.e., relatively poor). In the same preparations, we have observed lipid bilayers with a significantly better resolution, indicating that the poor quality of crystal images was not due to instrumental limitations. Rather, we attribute poor images to the intrinsic flexibility of these multilamellar crystals, which apparently allow movement of one layer relative to another in response to shear forces from the AFM tip. We therefore suggest some general guidelines for future studies of membrane proteins with AFM.     

Self-assembled monolayers and polymer brushes in biotechnology: current applications and future perspectives

The chemistry and topography of a surface affect biological response and are of fundamental importance, especially when living systems encounter synthetic surfaces. Most biomolecules have immense recognition power (specific binding) and simultaneously have a tendency to physically adsorb onto a solid substrate without specific receptor recognition (nonspecific adsorption). Therefore, to create useful materials for many biotechnology applications, interfaces are required that have both enhanced specific binding and reduced nonspecific binding. Thus, in applications such as sensors, the tailoring of surface chemistry and the use of micro or nanofabrication techniques becomes an important avenue for the production of surfaces with specific binding properties and minimal background interference. Both self-assembled monolayers (SAMs) and polymer brushes have attracted considerable attention as surface-active materials. In this review, we discuss both of these materials with their potential applications in biotechnology. We also summarize lithographic methods for pattern formation using combined top-down and bottom-up approaches and briefly discuss the future of these materials by describing emerging new applications.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Staphylococcus aureus-Fibronectin Interactions with and without Fibronectin-Binding Proteins and Their Role in Adhesion and Desorption

Adhesion and residence-time-dependent desorption of two Staphylococcus aureus strains with and without fibronectin (Fn) binding proteins (FnBPs) on Fn-coated glass were compared under flow conditions. To obtain a better understanding of the role of Fn-FnBP binding, the adsorption enthalpies of Fn with staphylococcal cell surfaces were determined using isothermal titration calorimetry (ITC). Interaction forces between staphylococci and Fn coatings were measured using atomic force microscopy (AFM). The strain with FnBPs adhered faster and initially stronger to an Fn coating than the strain without FnBPs, and its Fn adsorption enthalpies were higher. The initial desorption was high for both strains but decreased substantially within 2 s. These time scales of staphylococcal bond ageing were confirmed by AFM adhesion force measurement. After exposure of either Fn coating or staphylococcal cell surfaces to bovine serum albumin (BSA), the adhesion of both strains to Fn coatings was reduced, suggesting that BSA suppresses not only nonspecific but also specific Fn-FnBP interactions. Adhesion forces and adsorption enthalpies were only slightly affected by BSA adsorption. This implies that under the mild contact conditions of convective diffusion in a flow chamber, adsorbed BSA prevents specific interactions but does allow forced Fn-FnBP binding during AFM or stirring in ITC. The bond strength energies calculated from retraction force-distance curves from AFM were orders of magnitude higher than those calculated from desorption data, confirming that a penetrating Fn-coated AFM tip probes multiple adhesins in the outermost cell surface that remain hidden during mild landing of an organism on an Fn-coated substratum, like that during convective diffusional flow.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Growth and disorder of macromolecular crystals: insights from atomic force microscopy and X-ray diffraction studies

The growth processes and defect structures of protein and virus crystals have been studied in situ by atomic force microscopy (AFM), X-ray diffraction topography, and high-resolution reciprocal space scanning. Molecular mechanisms of macromolecular crystallization were visualized and fundamental kinetic and thermodynamic parameters, which govern the crystallization process of a number of macromolecular crystals, have been determined. High-resolution AFM imaging of crystal surfaces provides information on the packing of macromolecules within the unit cell and on the structure of large macromolecular assemblies. X-ray diffraction techniques provide a bulk probe with poorer spatial resolution but excellent sensitivity to mosaicity and strain. Defect structures and disorder created in macromolecular crystals during growth, seeding, and post-growth treatments including flash cooling were characterized and their impacts on the diffraction properties of macromolecular crystals have been analyzed. The diverse and dramatic effects of impurities on growth and defect formation have also been studied. Practical implications of these fundamental insights into the improvement of macromolecular crystallization protocols are discussed.     

Influence of ancillary binding and nonspecific adsorption on bioresponsive hydrogel microlenses

We report investigations of specific and nonspecific adsorption effects on bioresponsive hydrogel microlenses to better understand their utility and potential advantages for biosensing. Bioresponsive microgels were prepared from stimuli-responsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAM-co-AAc) microgels after functionalization with both biotin and ABP (as a photoaffinity label) via carbodiimide chemistry. Bioresponsive hydrogel microlenses were then constructed from the microgels via Coulombic assembly of the anionic microgels on a positively charged, silane-modified, glass substrate. Specific and nonspecific protein binding on the hydrogel microlenses was studied by monitoring the optical properties using brightfield and fluorescence optical microscopies. The bioresponsivity, as determined by changes in the microlensing power, is strongly coupled to the formation of cross-links via ligand-protein and/or antigen-antibody binding. However, the microlensing phenomenon and the intrinsic bioresponsivity of the hydrogels are completely insensitive to simple adsorption via nonspecific protein binding from reconstituted human serum. These results suggest that the hydrogel microlens construct may be a good candidate for a wide range of applications in which the bioresponsive material would be required to operate in complex biological media.     

AFM characterization of solid-supported lipid multilayers prepared by spin-coating

Lipids are the principal components of biologically relevant structures as cellular membranes. They have been the subject of many studies due to their biological relevance and their potential applications. Different techniques, such as Langmuir-Blodgett and vesicle-fusion deposition, are available to deposit ordered lipid films on etched surfaces. Recently, a new technique of lipid film deposition has been proposed in which stacks of a small and well-controlled number of bilayers are prepared on a suitable substrate using a spin-coater. We studied the morphological properties of multi-layers made of cationic and neutral lipids (DOTAP and DOPC) and mixtures of them using dynamic mode atomic force microscopy (AFM). After adapting and optimizing, the spin-coating technique to deposit lipids on a chemically etched Silicon (1,0,0) substrate, a morphological nanometer-scale characterization of the aforementioned samples has been provided. The AFM study showed that an initial layer of ordered vesicles is formed and, afterward, depending on details of the spin-coating preparation protocol and to the dimension of the silicon substrate, vesicle fusion and structural rearrangements of the lipid layers may occur. The present data disclose the possibility to control the lipid's structures by acting on spin-coating parameters with promising perspectives for novel applications of lipid films.     

AFM characterization of solid-supported lipid multilayers prepared by spin-coating

Lipids are the principal components of biologically relevant structures as cellular membranes. They have been the subject of many studies due to their biological relevance and their potential applications. Different techniques, such as Langmuir-Blodgett and vesicle-fusion deposition, are available to deposit ordered lipid films on etched surfaces. Recently, a new technique of lipid film deposition has been proposed in which stacks of a small and well-controlled number of bilayers are prepared on a suitable substrate using a spin-coater.We studied the morphological properties of multi-layers made of cationic and neutral lipids (DOTAP and DOPC) and mixtures of them using dynamic mode atomic force microscopy (AFM). After adapting and optimizing, the spin-coating technique to deposit lipids on a chemically etched Silicon (1,0,0) substrate, a morphological nanometer-scale characterization of the aforementioned samples has been provided. The AFM study showed that an initial layer of ordered vesicles is formed and, afterward, depending on details of the spin-coating preparation protocol and to the dimension of the silicon substrate, vesicle fusion and structural rearrangements of the lipid layers may occur.The present data disclose the possibility to control the lipid's structures by acting on spin-coating parameters with promising perspectives for novel applications of lipid films.     

Surface Potential Measurement of Bacteria Using Kelvin Probe Force Microscopy

Surface potential is a commonly overlooked physical characteristic that plays a dominant role in the adhesion of microorganisms to substrate surfaces. Kelvin probe force microscopy (KPFM) is a module of atomic force microscopy (AFM) that measures the contact potential difference between surfaces at the nano-scale. The combination of KPFM with AFM allows for the simultaneous generation of surface potential and topographical maps of biological samples such as bacterial cells. Here, we employ KPFM to examine the effects of surface potential on microbial adhesion to medically relevant surfaces such as stainless steel and gold. Surface potential maps revealed differences in surface potential for microbial membranes on different material substrates. A step-height graph was generated to show the difference in surface potential at a boundary area between the substrate surface and microorganisms. Changes in cellular membrane surface potential have been linked with changes in cellular metabolism and motility. Therefore, KPFM represents a powerful tool that can be utilized to examine the changes of microbial membrane surface potential upon adhesion to various substrate surfaces. In this study, we demonstrate the procedure to characterize the surface potential of individual methicillin-resistant Staphylococcus aureus USA100 cells on stainless steel and gold using KPFM.     

Nucleation and growth of calcite on native versus pyrolyzed oyster shell folia

The thin sheets of calcite, termed folia, that make up much of the shell of an oyster are covered by a layer of discrete globules that has been proposed to consist of agglomerations of protein and mineral. Foliar fragments, treated at 475 degrees C for 36 h to remove organic matter, were imaged by atomic force microscopy (AFM) as crystals grew on the foliar surfaces in artificial seawater at calcite supersaturations up to 52-fold. Crystals were also viewed later by scanning electron microscopy. After pyrolysis, the foliar globules persisted only as fragile remnants that were quickly washed away during AFM imaging, revealing an underlying morphology on the foliar laths of a tightly packed continuum of nanometer-scale protrusions. At intermediate supersaturations, crystal formation was seen immediately almost everywhere on these surfaces, each crystal having the same distinctive shape and orientation, even at the outset with crystals as small as a few nanometers. In contrast, nucleation did not occur readily on non-pyrolyzed foliar surfaces, and the crystals that did grow, although slowly at intermediate supersaturations, had irregular shapes. Possible crystallographic features of foliar laths are considered on the basis of the morphology of ectopic crystals and the atomic patterns of various surfaces. A model for foliar lath formation is presented that includes cycles of pulsed secretion of shell protein, removal of the protein from the mineralizing solution upon binding to mineral, and mineral growth at relatively high supersaturation over a time frame of about 1 h for each turn of the cycle.     

New technologies in scanning probe microscopy for studying molecular interactions in cells

Atomic force microscopy (AFM) is a specialised form of scanning probe microscopy, which was invented by Binnig and colleagues in 1986. Since then, AFM has been increasingly used to study biomedical problems. Because of its high resolution, AFM has been used to examine the topography or shape of surfaces, such as during the molecular imaging of proteins. This, combined with the ability to operate under known force regimes, makes AFM technology particularly useful for measuring intermolecular bond forces and assessing the mechanical properties of biological materials. Many of the constraints (e.g. complex instrumentation, slow acquisition speeds and poor vertical range) that previously limited the use of AFM in cell biology are now beginning to be resolved. Technological advances will enable AFM to challenge both confocal laser scanning microscopy and scanning electron microscopy as a method for carrying out three-dimensional imaging. Its use as both a precise micro-manipulator and a measurement tool will probably result in many novel and exciting applications in the future. In this article, we have reviewed some of the current biological applications of AFM, and illustrated these applications using studies of the cell biology of bone and integrin-mediated adhesion.     

Crystal structure to 1.7 a of the Escherichia coli pyrimidine nucleoside hydrolase YeiK, a novel candidate for cancer gene therapy

Enzymes with nucleoside hydrolase (NH) activity are crucial for salvaging nucleic acid components in purine auxotrophic protozoan parasites, but are also present in prokaryotes and higher eukaryotes. Here we analyze the distribution of genes encoding for putative NH proteins and characterize the yeiK gene product from Escherichia coli as a pyrimidine-specific NH. The crystal structure of YeiK to 1.7 A defines the structural basis for its substrate specificity and identifies residues involved in the catalytic mechanism that differ from both nonspecific and purine-specific NHs. Large differences in the tetrameric quaternary structure compared to nonspecific protozoan NHs are brought forth by minor differences in the interacting surfaces. The first structural and functional characterization of a nonparasitic, pyrimidine nucleoside-specific NH suggests a possible role for these enzymes in the metabolism of tRNA nucleosides. The high catalytic efficiency of YeiK toward 5-fluorouridine could be exploited for suicide gene therapy in cancer treatment.     

基于AFM的活体状态外泌体纳米结构及机械特性研究(英文)

外泌体在细胞生理病理活动过程中起着重要的调控作用,研究外泌体的行为特性对于揭示生命活动及疾病发生发展的内在机理具有重要的基础意义.然而由于缺乏合适的观测手段及方法,目前对于活体状态下外泌体结构及特性的认知仍然很不足.原子力显微镜(AFM)的发明为研究溶液环境下天然状态生物样本提供了强大的技术工具,已成为生物学重要研究手段.本文利用AFM对单个活体状态外泌体的纳米结构及机械特性进行了研究.通过多聚赖氨酸静电吸附作用将从淋巴瘤患者骨髓中分离的外泌体吸附至基底,在溶液环境下实现了对单个活体状态外泌体的高质量AFM形貌成像并通过与空气中成像结果进行对比揭示了空气干燥处理对外泌体形貌的影响.在此基础上,分别利用AFM压痕试验和多参数成像技术实现了对单个活体状态外泌体机械特性的定量测量和可视化表征.最后基于所建立的方法技术揭示了化学处理后外泌体结构和机械特性的动态变化.研究结果为研究纳米尺度下活体状态外泌体的结构及特性,以更好理解天然状态外泌体的生理行为提供了新的方法和思路,对于外泌体研究具有潜在积极的意义.