The region controlling the thermosensitive effect of plasmid Rts1 on host growth is separate from the Rts1 replication region.

Rts1 is a high-molecular-weight (126 x 10(6)) plasmid encoding resistance to kanamycin. It expresses unusual temperature-sensitive phenotypes, which affect plasmid maintenance and replication, as well as host cell growth. We have cloned the essential replication region of Rts1 from pAK8, a smaller derivative which is phenotypically similar to Rts1. Restriction endonuclease digests of isolated pAK8 deoxyribonucleic acid were allowed to "self-ligate" (ligation without an additional cloning vector) and subsequently were used to transform Escherichia coli strain 20SO to kanamycin resistance. Screening of these strains for the phenotypes of thermosensitive host growth and temperature-dependent plasmid elimination demonstrated that these two properties were expressed independently. Furthermore, it was shown that the Rts1 replication locus per se is not necessarily responsible for altered host growth at the nonpermissive temperature. The kanamycin resistance fragment of pAK8 was also cloned into pBR322. Electrophoretic analysis of BamHI restriction enzyme digests of this plasmid and similar digests of an Rts1 miniplasmid has allowed the identification of an 18.6-megadalton fragment carrying the replication locus and a 14.1-megadalton fragment carrying the kanamycin resistance gene.     

Molecular cloning and mapping of a deletion derivative of the plasmid Rts 1

The plasmid pTW20 is a deletion derivative of the kanamycin resistance plasmid Rts1. By digesting pTW20 DNA with EcoRI endonuclease six fragments were generated, and each was cloned in the vector plasmid pACYC184. These cloned EcoRI fragments were further digested with various endonucleases, and the cleavage map of pTW20 was constructed. A SalI fragment (1.5 Md) in E1 (the largest EcoRI fragment; 11.5 Md) contained the genes kan (kanamycin resistance) and puv (uv sensitization of host). An electron microscopy study of a BamHI fragment containing kan revealed the presence of a transposon-like structure in the fragment. The smallest EcoRI fragment E6 (2.0 Md) was capable of autonomous replication in a polA host, indicating that E6 contained replication genes of pTW20. These genes were found to be located on a 1.1-Md HindIII fragment in E6. Two incompatibility genes were identified on the pTW20 genome, one located on each of the fragments E6 and E5 (3.5 Md), and expressed T incompatibility independently. The nature of the temperature sensitivity of pTW20 was discussed.     

Cloning of the replication and incompatibility regions of a plasmid derived from Rts1

A replication region, consisting of a 1.1-megadalton (Md) EcoRI/HindIII fragment, was isolated from an Rts1 derivative plasmid. This 1.1-Md fragment, designated as mini-Rts1, was ligated to either pBR322 or a nonreplicating DNA fragment specifying a drug resistance, and its replication properties were investigated. The mini-Rts1 plasmid was cured at a high frequency at 42 °C, while it was maintained stably at 37 °C despite it existed in low copy number. These behaviors are quite similar to those of Rts1. By dissecting the pBR322:mini-Rts1 chimeric plasmid with AccI endonuclease, an inc region of 0.34 Md in size was cloned, which expressed incompatibility toward Rts1. Proteins encoded on the mini-Rts1 genome were examined in the minicell system, and one specific product of 35,000 daltons in molecular weight was identified. Any polypeptides specific for the 0.34-Md inc⁺ region within mini-Rts1 were not detected.     

The kanamycin resistance transposon Tn2680 derived from the R plasmid Rts1 and carried by phage P1Km has flanking 0.8-kb-long direct repeats

Phage P1Km carries within the invertible DNA segment a 5-kb insertion with 0.8-kb terminal direct repeats flanking the kanamycin resistance determinant. The same structure was also found on the R plasmid Rts1, from which the Km resistance segment of P1Km was derived. Obviously, this Km resistance segment translocated as a unit to the P1 genome and it is therefore called Tn2680. Loss of the Km resistance determinant due to recombination between the flanking direct repeats occurs during vegetative growth of P1Km. Amplification of Tn2680 to tandem oligomers is documented and is thought to result from recombination between the flanking direct repeats. The flanking 0.8-kb repeats are different from known IS elements.     

An Rts1-derivative plasmid conferring UV sensitivity on Escherichia coli host

A deletion mutant was isolated from a kanamycin resistance R plasmid Rtsl. This mutant plasmid, pTW20, was found to enhance the lethal effect of UV irradiation on $\text{Escherichia}\text{coli}$ host, especially at 42°C. A cloning experiment with pTW20 DNA demonstrated that the gene, $\text{puv}$, being responsible for the UV sensitivity was located on the kanamycin resistance gene containing $\text{Bam}$H1 fragment of pTW20. This fragment conferred a sensitivity to methyl methane sulfonate on its host along with the sensitivity to UV, suggesting that a reapir process of the host chromosome is impaired by the presence of $\text{puv}$.     

Integration of R plasmid Rts1 to the gal region of the Escherichia coli chromosome.

An R plasmid Rts1 was integrated into the gal region of the chromosome of Escherichia coli XA-7012 (galE) strain by the directed transposition technique. The integration of the Rts1 genome was confirmed mainly by conjugation studies and also by transduction experiments using phage P1. As a result, it was found that the integrated genome contained genes responsible for kanamycin resistance, conjugal transferability, and for autonomous replication. As reported previously, Rts1 is temperature sensitive in replication and inhibits the growth of the host at nonpermissive temperature. However, although a plasmid derived from the integrated Rts1 genome still demonstrates temperature sensitivity upon transfer and high level of kanamycin resistance, this plasmid no longer displays temperature sensitivity in replication and the inhibitory effect on the host. These results indicate that the temperature sensitivity of replication of Rts1 and its inhibitory effect on the host cell are due to the presence of a gene or gene cluster on the Rts1 genome and that the gene(s) is clearly discriminated from the one responsible for the temperature sensitivity of transfer.     

Control of replication and segregation of R plasmid Rts1.

A mutant plasmid, pTW2, which was derived from the integrated Rst1 genome in the Escherichia coli chromosome, was studied as to its mode of replication at 30 degrees C. When Proteus mirabilis Pm17 harboring pTW2 was grown in broth at 30 degrees C, a considerable number of R- segregants (approximately 40%) were consistently observed. This indicates that pTW2 is unstable even at the permissive temperature for the replication of Rts1. The pTW2+ cells in a culture were heterogeneous with respect to the level of kanamycin resistance, ranging from 500 to 4,000 mug of the drug per ml. The amount of pTW2 deoxyribonucleic acid (DNA) relative to the Pm17 chromosomal DNA was about fivefold as large as that of Rts1 DNA in an exponentially growing culture. In addition, pTW2 in P. mirabilis continued to replicate after the chromosome had ceased to replicate, which was shown in the study of the inhibition of protein synthesis. Contrary to pTW2, the parent plasmid Rts1 is highly stable, and the relative percent Rts1 DNA is maintained at approximately 7% in any cultural conditions at a permissive temperature. These results suggest that copies of pTW2 may not segregate evenly into the host progeny upon cell division and that the replication of pTW2 does not coordinate with that of the chromosome. A remarkable instability of pTW2 as well as an increase in the relative percent pTW2 DNA was also shown when E. coli were used as the host cells. These results suggest the possibility that there is a gene or a gene cluster on the Rst1 genome responsible for the control of both replication and segregation of Rts1.     

Acceptance and transfer of plasmid Rts1 by bacteria of the genus Erwinia]

The ability of 13 Erwinia strains to accept, to inherit and to transmit the Rts1 factor by conjugation was studied. 11 strains accepted the Rts1 factor from Escherichia coli K-12 CSH-2 with the frequency of about 10(-7)--10(-3). The Rts1 factor was genetically stable in the Erwinia cells and was not eliminated by acriflavine and under the temperature of 37 and 42 degrees C. All the R+ exconjugants were characterized with more high degree of the resistance of kanamycin than E. coli cells harbouring the same R factor. Erwinia strains harbouring the Rts1 plasmid transferred it by conjugation into homologic (Erwinia) and heterologic (E. coli) bacteria. The study of kinetics of the transfer of the Rts1 factor in different mating systems showed that the transfer of this plasmid from R+ Erwinia into R- Erwinia and R- E. coli--in the liquid medium. It is concluded that Erwinia can be the host and the donor of the Rts1 factor.     

Three short fragments of Rts1 DNA are responsible for the temperature-sensitive growth phenotype (Tsg) of host bacteria.

Rts1 is a multiphenotype drug resistance factor, and one of its phenotypes is temperature-sensitive growth (Tsg) of host bacteria. A 3.65-kb fragment from Rts1 DNA was shown to cause the Tsg phenotype in host cells. This tsg fragment was split by a restriction enzyme, HincII, into four fragments. Two of these fragments were called HincII-S (short) and HincII-L (long), respectively. Each of these two fragments conferred the Tsg phenotype, indicating that, in fact, these two independent regions were responsible for the Tsg phenotype. The HincII-S 783-bp and HincII-L 1,479-bp fragments were sequenced. The region in the HincII-S fragment to which the Tsg phenotype was attributed was narrowed to a 146-bp (nucleotides 1 to 146) fragment by various restriction enzyme digestions. Further digestion of the 146-bp fragment with Bal 31 suggested that the 116-bp (nucleotides 9 to 124) fragment is the minimum sequence required for Tsg. On the other hand, in the HincII-L fragment, a fragment of 249 bp (nucleotides 1210 to 1458) and a fragment of 321 bp (nucleotides 1942 to 2262) contained separate temperature-sensitive growth activity. None of three tsg fragments contained open reading frames. The 249-bp fragment had very weak Tsg activity, while the 321-bp fragment had no Tsg activity. On the other hand, when these two fragments were together in the pUC19 vector, they exhibited very strong Tsg activity equivalent to that of the original 1,479-bp fragment. In addition, two of the 249-bp fragments gave similar, strong Tsg activity. The HincII-L 1,479-bp fragment contained an open reading frame for kanamycin resistance which was found between nucleotides 1423 and 2238. This kanamycin resistance gene sequence was different from that of the reported kanamycin resistance gene of Tn903 at 12 positions which were deduced to change seven amino acids.     

Identification of an Rts1 DNA fragment conferring temperature-dependent instability to vector plasmids

The multiphenotypic drug resistance factor Rts1 expresses a temperature-dependent instability characteristic. This plasmid was digested with the restriction enzyme BamHI. A DNA fragment with a molecular weight of 5.6 MDa (the H fragment) was inserted into plasmid pBR322 (pFK896) or into pSC105 (pYH156) at the BamHI site. These plasmids were unstable at 42 degrees C but stable at 32 degrees C. A restriction-enzyme map of the H fragment was constructed and the instability phenotype (Tdi) was localized to a DNA fragment with 0.5 MDa molecular weight. The temperature-dependent loss of the unstable plasmid pFK896 is abrupt and no gradual plasmid loss of this multicopy recombinant plasmid is observed. The possibility that the Tdi phenotype is due to overgrowth of R- cells was eliminated.     

Replication of thermosensitive Rts1 plasmid deoxyribonucleic acid at the nonpermissive temperature.

Replication of the thermosensitive drug resistance factor Rts1 was studied at the nonpermissive temperature (42 degrees C). It was concluded from the following observations that replication of this plasmid takes place at 42 degrees C without involving the covalently closed circular (CCC) form of deoxyribonucleic acid (DNA). (i) DNA-DNA- reassociation kinetics studies with purified Rts1 DNA showed that Rts1 DNA increased several-fold during cell growth at 42 degrees C while very little, if any, CCC DNA was synthesized. (ii) When Escherichia coli 20S0(Rts1) was labeled with [3H]thymidine at 42 degrees C, a significant amount of radioactive DNA hybridizable to Rts1 DNA was formed. This DNA was found in a fraction where DNA other than CCC DNA was expected in alkaline sucrose density gradient centrifugation analysis. When E. coli 20S0(Rts1) was labeled at 32 degrees C, the labeled CCC DNA did not disappear during a chase period at 42 degrees C. This indicates that preformed CCC DNA does not participate in replication at the nonpermissive temperature. These results are consistent with the hypothesis that there are two modes of replication of Rts1 DNA, one involving a CCC molecule and the other not involving this form, and that only the latter mode takes place at the nonpermissive temperature.     

Requirement of Cyclic Adenosine 3′,5′-Monophosphate for the Thermosensitive Effects of Rts1 in a Cyclic Adenosine 3′,5′-Monophosphate-Less Mutant of Escherichia coli

Previous publications showed that a covalently closed circular (CCC) Rts1 plasmid deoxyribonucleic acid (DNA) that confers kanamycin resistance upon the host bacteria inhibits host growth at 42 degrees C but not at 32 degrees C. At 42 degrees C, the CCC Rts1 DNA is not formed, and cells without plasmids emerge. To investigate the possible role of cyclic adenosine 3',5'-monophosphate (cAMP) in the action of Rts1 on host bacteria, Rts1 was placed in an Escherichia coli mutant (CA7902) that lacks adenylate cyclase or in E. coli PP47 (a mutant lacking cAMP receptor protein). Rts1 did not exert the thermosensitive effect on these cells, and CCC Rts1 DNA was formed even at 42 degrees C. Upon addition of cAMP to E. coli CA7902(Rts1), cell growth and formation of CCC Rts1 DNA were inhibited at 42 degrees C. The addition of cAMP to E. coli PP47(Rts1) did not cause inhibitory effects on either cell growth or CCC Rts1 DNA formation at 42 degrees C. The inhibitory effect of cAMP on E. coli CA7902(Rts1) is specific to this cyclic nucleotide, and other cyclic nucleotides such as cyclic guanosine 3',5'-monophosphate did not have the effect. For this inhibitory effect, cells have to be preincubated with cAMP; the presence of cAMP at the time of CCC Rts1 DNA formation is not enough for the inhibitory effect. If the cells are preincubated with cAMP, one can remove cAMP during the [(3)H]thymidine pulse and still observe its inhibitory effect on the formation of CCC Rts1 DNA. The presence of chloramphenicol during this preincubation period abolished the inhibitory effect of cAMP. These observations suggest that cAMP is necessary to induce synthesis of a protein that inhibits CCC Rts1 DNA formation and cell growth at 42 degrees C.     

Further characterization of the R plasmid Rts1 and its mutant pTW2: replication and incompatibility of the plasmid.

Incompatibility of the R plasmid Rts1 and its replication mutant pTW2 was studied in recA host cells of Escherichia coli. When the R plasmid R401, belonging to the same incompatibility group as Rts1, was used as a test plasmid, R401 was eliminated preferentially from (Rts-R401)+ cells irrespective of the direction of transfer. In contrast, pTW2 and R401 were mutually excluded. The decreased incompatibility of pTW2 was confirmed by a direct incompatibility test in which a derivative of Rts1 expelled pTW2 exclusively. Alkaline sucrose gradients of pTW2 and Rts1 DNA indicated that approximately one-fourth of the Rts1 genome was deleted in pTW2. In addition, both the various temperature-dependent properties of Rts1 and the inhibitory effect on phage T4 development were also lost in pTW2. A possible mechanism that regulates the stringent replication of Rts1 is discussed.     

Essential DNA sequence for the replication of Rts1.

The promoter sequence of the mini-Rts1 repA gene encoding the 33,000-dalton RepA protein that is essential for replication was defined by RNA polymerase protection experiments and by analyzing RepA protein synthesized in maxicells harboring mini-Rts1 derivatives deleted upstream of or within the presumptive promoter region. The -10 region of the promoter which shows homology to the incII repeat sequences overlaps two inverted repeats. One of the repeats forms a pair with a sequence in the -35 region, and the other forms a pair with the translation initiation region. The replication origin region, ori(Rts1), which was determined by supplying RepA protein in trans, was localized within 188 base pairs in a region containing three incII repeats and four GATC sequences. Dyad dnaA boxes that exist upstream from the GATC sequences appeared to be dispensable for the origin function, but deletion of both dnaA boxes from ori(Rts1) resulted in reduced replication frequency, suggesting that host-encoded DnaA protein is involved in the replication of Rts1 as a stimulatory element. Combination of the minimal repA and ori(Rts1) segments, even in the reverse orientation compared with the natural sequence, resulted in reconstitution of an autonomously replicating molecule.     

Nucleotide sequence and copy control function of the extension of the incI region (incI-b) of Rts 1

An Rts1 derivative, pTW20, contains three incompatibility (inc) regions, incI-a (incI in previous studies), incII, and newly determined incI-b loci. By restriction analysis, we have located the incI-b adjacent to the incI-a region on the pTW20 map. Nucleotide sequence analysis of the minimal incI-b region revealed the presence of four repeated sequences, each consisting of 18 bp, which is similar to the incI-a and incII repeats existing on mini-Rts1. All four repeating units were required for expression of a strong incompatibility. In addition, RepA protein, essential for the replication of Rts1, bound specifically to the repeated sequences, suggesting that the repeats would titrate out RepA protein as do incI-a and IncII. Insertion of the incI-b to a mini-Rts1 plasmid in a natural arrangement decreases the copy number of mini-Rts1 to the same level as that of mini-F. The incI-a and incI-b might be a single constituent in incompatibility and copy number control of Rts1.     

Construction of a fused operon consisting of the recA and kan (Kanamycin resistance) genes and regulation of its expression by the lexA gene

Molecular Genetics and Genomics - The kanamycin resistance gene (kan) of transposon Tn5 was cloned into a derivative of plasmid pBR322. A DNA fragment containing the promoter-operator region of the...     

The Arcanobacterium (Actinomyces) pyogenes Plasmid pAP1 Is a Member of the pIJ101/pJV1 Family of Rolling Circle Replication Plasmids

The 2.4-kb plasmid pAP1 from Arcanobacterium (Actinomyces) pyogenes had sequence similarity within the putative replication protein and double-stranded origin with the pIJ101/pJV1 family of plasmids. pJGS84, a derivative of pAP1 containing a kanamycin resistance gene, was able to replicate in Escherichia coli and Corynebacterium pseudotuberculosis, as well as in A. pyogenes. Detection of single-stranded DNA intermediates of pJGS84 replication suggested that this plasmid replicates by the rolling circle mechanism.     

Excision of a DNA sequence determining kanamycin resistance from a ColE1-Km recombinant plasmid

Summary A 4.8×10⁶ dalton ECoRI-generated fragment of the R-factor R6-5 carrying the gene for kanamycin resistance (Km) was joined in vitro to ECoRI-treated ColE1 plasmid DNA. Transformation ofE. coli with the ColE1-Km recombinant plasmid yielded clones, which were immune to colicin E1, resistant to kanamycin and failed to produce colicin E1. During multiplication of this recombinant plasmid in the presence of chloramphenicol, cells expressed an increased resistance to kanamycin. Transformation studies with the recombinant DNA molecule showed very frequent loss of Km resistance in those cells harbouring a preexisting F'gal plasmid. Since colicin immunity is not affected and the col^- phenotype is still present, one has to test for a remaining DNA sequence further existing in ColE1 DNA by cleaving the plasmid DNA with the ECoRI restriction endonuclease. The full length of ColE1 DNA (6.2 kb) was restored, which confirmed that no deletion of ColE1 DNA sequences had occured. The remaining DNA sequence was identified as a 2.0 or 2.2 kb segment. On the basis of the length of the excised fragment it is proposed that the insertion sequence IS1 and a part of the inverted repeat sequence with coordinates 21.0 to 22.0 of the R6-5 DNA are recognised by a nucleolytic function.     

Nucleotide sequence of an Rts1 fragment causing temperature-dependent instability.

Rts1 is a multiphenotypic drug resistance plasmid which is eliminated from host bacteria at 42 degrees C but not at 32 degrees C. This phenotype has been called temperature-dependent instability (Tdi). We determined the nucleotide sequence of the Rts1 DNA b' segment which causes this phenotype. Within this 786-base-pair segment, several open reading frames (ORFs) were found, including one which encodes a protein with a molecular weight of 16,000. A protein approximately corresponding to this protein is expressed in Escherichia coli minicells harboring plasmids containing the b' segment. In addition, we found the chi sequence at 112 bases proximal to this ORF. Temperature-dependent elimination due to this segment was not observed in the RecA strain of E. coli, but the RecB protein was not required for expression of this phenotype. We constructed various deletion derivatives and found that three portions, the region containing the chi (nucleotides 1 to 24), ORF (nucleotides 25 to 546), and tail (nucleotides 631 to 786) sequences are necessary for Tdi activity. Site-directed mutagenesis studies indicated that ORF I is required for Tdi expression.     

Function of the N-terminal half of RepA in activation of Rts1 ori.

The RepA protein of the Rts1 plasmid, consisting of 288 amino acids, is a trans-acting protein essential for replication. A mutant repA gene, repA delta C143, carrying a deletion that removed the 143 C-terminal amino acids of RepA, could transform, but at a low frequency, an Escherichia coli polA strain, JG112, when repA delta C143 was cloned into pBR322 with Rts1 ori in the natural configuration. The transformation was less efficient without the dyad DnaA box in the ori region, and no transformation occurred at 42 degrees C, characteristic of Rts1 replication. A fusion of the 3'-terminal half of repA of the P1 plasmid to repA delta C143 yielded a pBR322 chimeric plasmid that contained Rts1 ori through hybrid (Rts1-P1) repA. This plasmid was maintained much more stably in JG112 at 37 degrees C. At 42 degrees C, however, it was quite unstable. The overproduced hybrid RepA protein showed interference with mini-Rts1 replication in trans and also exhibited an autorepressor function, although both activities were decreased. These findings suggest that the N-terminal half of the RepA molecule of Rts1 is involved in the activation of the replication origin.