A biophysical study of the interaction of the lipopeptide antibiotic iturin A with aqueous phospholipid bilayers

Iturin A is a lipopeptide extracted from the culture media of Bacillus subtilis which shows a strong antifungal action. The interaction of iturin A with multilamellar vesicles of dimyristoylphosphatidylcholine (DMPC) induced structures which did not sediment during centrifugation. Electron microscopy after negative staining showed that, at 30 mol%, iturin A/DMPC vesicles were visible but smaller than those formed by pure DMPC. Thermograms of DMPC/iturinA obtained after differential scanning calorimetry, at low concentrations of iturin A, were interpreted as indicating the presence of two laterally separated phases, one formed by pure phospholipid and the other by lipopeptide-phospholipid complexes, these two separated phases being already detected even at low concentrations such as 2 mol%. Fluorescence quenching experiments showed that the D-Tyr residue of the lipopeptide was fully accessible to the aqueous medium, indicating that the polar part of iturin A is located outside of the membrane hydrophobic palisade. It was concluded that the membrane barrier properties are likely to be damaged in the area where the lipid complexes are accumulated, due to structural fluctuations, and this may be one of the bases of its biological activity. Iturin-A was also able to greatly destabilize dielaidoylphosphatidylethanolamine (DEPE) membranes in the fluid form, producing a new structure which had a poor correlation in X-ray diffraction, and in 31P NMR spectroscopy gave rise to a spectrum containing a double isotropic signal. Iturin A was shown to induce DEPE to adopt phases other than H(II) inverted hexagonal, underlining that this lipopeptide is capable of modifying the curvature of the membrane, which may also be important in explaining the tendency of iturin A to create small vesicles and which may be another of the bases of its biological activity.     

Micellization and interactions with phospholipid vesicles of the lipopeptide iturin a,as monitored by time-resolved fluorescence of a D-tyrosyl residue

The micellization and the interactions with lipid vesicles of the antifungal cyclic lipopeptide iturin A have been investigated by nanosecond pulse fluorometry of a D-tyrosyl residue. We show that this lipopeptide has three conformers in solution whose proportions are modified during the micellization process. Below the critical micellar concentration (CMC) iturin A does not self-associate inside the bilayer. Above the CMC all the molecules of iturin A interact with the vesicles and self-associate inside the membrane.     

Further aspects on the hemolytic activity of the antibiotic lipopeptide iturin A

The bacterial lipopeptide iturin A is able to cause hemolysis of human erythrocytes in a dose-dependent manner. Hemolysis takes place at iturin concentrations below its critical micellar concentration. Relative kinetics determinations clearly show that K(+) leakage occurs prior to hemoglobin release. Furthermore, hemolysis can be prevented by addition to the outer solution of osmotic protectants of appropriate size. Altogether these results indicate that iturin A-induced hemolysis follows a colloid-osmotic mechanism, with the formation of a membrane pore of average diameter 32 A. Iturin A is capable of inducing leakage of an aqueous fluorescent probe trapped in human erythrocyte ghosts, but not in large unilamellar liposomes made of various lipid compositions. The different permeabilizing effects of iturin A on model and biological membranes are discussed on the light of the presented results.     

Further aspects on the hemolytic activity of the antibiotic lipopeptide iturin A

The bacterial lipopeptide iturin A is able to cause hemolysis of human erythrocytes in a dose-dependent manner. Hemolysis takes place at iturin concentrations below its critical micellar concentration. Relative kinetics determinations clearly show that K⁺ leakage occurs prior to hemoglobin release. Furthermore, hemolysis can be prevented by addition to the outer solution of osmotic protectants of appropriate size. Altogether these results indicate that iturin A-induced hemolysis follows a colloid-osmotic mechanism, with the formation of a membrane pore of average diameter 32 Å. Iturin A is capable of inducing leakage of an aqueous fluorescent probe trapped in human erythrocyte ghosts, but not in large unilamellar liposomes made of various lipid compositions. The different permeabilizing effects of iturin A on model and biological membranes are discussed on the light of the presented results.     

Pore-forming properties of iturin A, a lipopeptide antibiotic

The addition of iturin A, a lipopeptide antibiotic extracted from Bacillus subtilis, to a bimolecular lipid membrane (BLM) increases dramatically its electrical conductance. For very low concentration of iturin A, discrete conductance steps are observed which are assigned to the formation of conducting pores. The characteristics of these pores depend on the lipid content of the BLM and they change with time. Cholesterol considerably increases the lifetimes of open states. The pores are slightly anion versus cation selective. These first observations unable us to briefly discuss the pore-forming properties of lipopeptides.     

Aggregational behavior of aqueous dispersions of the antifungal lipopeptide iturin A

Iturin A, a lipopeptide isolated from Bacillus subtilis, possesses a strong antifungal activity, and has been devoted to a great deal of attention. Since iturin is an amphiphilic compound with a great propensity to self-associate in solution as well as inside the membrane, the question arises to whether its aggregational behavior is dependent on the concentration of the lipopeptide. In order to test this, the ability of iturin suspensions to encapsulate water-soluble molecules has been examined. Iturin was dispersed at different concentrations above its critical micellar concentration, in a buffer containing the water-soluble dye 5,6-carboxyfluorescein. For iturin A micelles, a Stokes radius of 1.3 nm and an aggregational number of 7 was obtained. The results shown in this work clearly demonstrate that iturin dispersions in water, at concentrations of 0.7, 1.4 and 3 mM, i.e. far above the critical micellar concentration (40 microM), are capable of encapsulating carboxyfluorescein, probably by adopting a type of aggregate different from the micelle. Negative-staining electron microscopy shows the presence of vesicles with an average size of 150 nm. By using (14)C-iturin, it is shown that, at 3 mM concentration, 40 % of the iturin molecules adopt this vesicular state. It is proposed that iturin molecules form a fully interdigitated bilayer, where each hydrocarbon tail span the entire hydrocarbon width of the bilayer, resulting in multilamellar vesicles capable of encapsulating an aqueous compartment. The possible implications of these results to the membrane destabilizing effect of iturin A, are discussed according to the dynamic cone-shape of the iturin molecule.     

Fluorescence study on the interaction of a multiple antigenic peptide from hepatitis A virus with lipid vesicles

The interaction of the multiple antigenic peptide MAP4VP3 with lipid membranes has been studied by spectroscopic techniques. MAP4VP3 is a multimeric peptide that corresponds to four units of the sequence 110-121 of the capsid protein VP3 of hepatitis A virus. In order to evaluate the electrostatic and hydrophobic components on the lipid-peptide interaction, small unilamelar vesicles of different compositions, including zwitterionic dipalmitoylphosphatidylcholine (DPPC), anionic dipalmitoylphosphatidylcholine/phatidylinositol (DPPC:PI 9:1), and cationic dipalmitoylphosphatidylcholine/stearylamine (DPPC:SA 9.5:0.5), were used as membrane models. Intrinsic tryptophan fluorescence changes and energy transfer experiments show that MAP4VP3 binds to all three types of vesicles with the same stoichiometry, indicating that the electrostatic component of the interaction is not important for binding of this anionic peptide. Steady-state polarization experiments with vesicles labeled with 1,6-diphenyl-1,3,5-hexatriene or with 1-anilino-8-naphtalene sulphonic acid indicate that MAP4VP3 induces a change in the packing of the bilayers, with a decrease in the fluidity of the lipids and an increase in the temperature of phase transition in all the vesicles. The percentage of lipid exposed to the bulk aqueous phase is around 60% in intact vesicles, and it does not change upon binding of MAP4VP3 to DPPC vesicles, indicating that the peptide does not alter the permeability of the membrane. An increase in the amount of lipid exposed to the aqueous phase in cationic vesicles indicates either lipid flip-flop or disruption of the vesicles. Binding to DPPC vesicles occurs without leakage of entrapped carboxyfluorescein, even at high mol fractions of peptide. However, a time-dependent leakage is seen with cationic DPPC/SA and anionic DPPC/PI vesicles, indicating that the peptide induces membrane destabilization and not lipid flip-flop. Resonance energy transfer experiments show that MAP4VP3 leakage from cationic vesicles is due to membrane fusion, whereas leakage from anionic vesicles is not accompanied by lipid mixing. Results show that MAP4VP3 interacts strongly with the lipid components of the membrane, and although binding is not of electrostatic nature, the bound form of the peptide has different activity depending on the membrane net charge; thus, it is membrane disruptive in cationic and anionic vesicles, whereas no destabilizing effect is seen in DPPC vesicles.     

Interaction of the precursor to mitochondrial aspartate aminotransferase and its presequence peptide with model membranes

The possible contribution of the mature portion of a mitochondrial precursor protein to its interaction with membrane lipids is unclear. To address this issue, we examined the interaction of the precursor to mitochondrial aspartate aminotransferase (pmAAT) and of a synthetic peptide corresponding to the 29-residue presequence peptide (mAAT-pp) with anionic phospholipid vesicles. The affinity of mAAT-pp and pmAAT for anionic vesicles is nearly identical. Results obtained by analyzing the effect of mAAT-pp or full-length pmAAT on either the permeability or microviscosity of the phospholipid vesicles are consistent with only a shallow insertion of the presequence peptide in the bilayer. Analysis of the quenching of Trp-17 fluorescence by brominated phospholipids reveals that this presequence residue inserts to a depth of approximately 9 A from the center of the bilayer. Furthermore, in membrane-bound pmAAT or mAAT-pp, both Arg-8 and Arg-28 are accessible to the solvent. These results suggest that the presequence segment lies close to the surface of the membrane and that the mature portion of the precursor protein has little effect on the affinity or mode of binding of the presequence to model membranes. In the presence of vesicles, mAAT-pp adopts considerable alpha-helical structure. Hydrolysis by trypsin after Arg-8 results in the dissociation of the remaining 21-residue C-terminal peptide fragment from the membrane bilayer, suggesting that the N-terminal portion of the presequence is essential for membrane binding. Based on these results, we propose that the presequence peptide may contain dual recognition elements for both the lipid and import receptor components of the mitochondrial membrane.     

Osmotic and pH transmembrane gradients control the lytic power of melittin.

Transmembrane osmotic gradients applied on large unilamellar 1-palmitoyl-2-oleoyl-phosphatidylcholine vesicles were used to modulate the potency of melittin to induce leakage. Melittin, an amphipathic peptide, changes the permeability of vesicles, as studied using the release of entrapped calcein, a fluorescent marker. A promotion of the ability of melittin to induce leakage was observed when a hyposomotic gradient (i.e., internal salt concentration higher than the external one) was imposed on the vesicles. It is proposed that structural perturbations caused by the osmotic pressure loosen the compactness of the outer leaflet, which facilitates the melittin-induced change in membrane permeability. Additionally, we have shown that this phenomenon is not due to enhanced binding of melittin to the vesicles using intrinsic fluorescence of the melittin tryptophan. Furthermore, we investigated the possibility of using a transmembrane pH gradient to control the lytic activity of melittin. The potency of melittin in inducing release is known to be inhibited by increased negative surface charge density. A transmembrane pH gradient causing an asymmetric distribution of unprotonated palmitic acid in the bilayer is shown to be an efficient way to modulate the lytic activity of melittin, without changing the overall lipid composition of the membrane. We demonstrate that the protective effect of negatively charged lipids is preserved for asymmetric membranes.     

Conformational study of bacterial lipopeptides: refinement of the structure of iturin A in solution by two-dimensional 1H-NMR and energy calculations

Iturin A is a lipopeptide extracted from strains of Bacillus subtilis. Seven peptide residues form a cycle closed by a β-amino acid carrying a hydrophobic tail. This compound is an antifungal and induces the formation of conducting pores in black lipid membranes. Two-dimensional ¹H-nmr was used for investigating its conformation in pyridine. A complete set of nuclear Overhauser effects (NOEs) was obtained from which interproton distances were deduced in a rather broad range of 2.2–4.2 Å. A special procedure was then used to optimize simultaneously experimental parameters and intramolecular energy calculated by semiempirical methods. A model of the conformation is proposed for the backbone for which there is an excellent coherence between NOEs, coupling constants, and intramolecular energy. The conformations of Asn, Gln, and Ser side chains appear to be much more flexible because of their interactions with the solvent. From this picture, iturin A seems to have a rather stiff ring surrounded by mobile side chains. Further studies of this lipopeptide and of other members of the family should enable us to approach some structure–activity relationships for this class of antibiotics.     

Binding of basic peptides to acidic lipids in membranes: effects of inserting alanine(s) between the basic residues.

We studied the binding of peptides containing five basic residues to membranes containing acidic lipids. The peptides have five arginine or lysine residues and zero, one, or two alanines between the basic groups. The vesicles were formed from mixtures of a zwitterionic lipid, phosphatidylcholine, and an acidic lipid, either phosphatidylserine or phosphatidylglycerol. Measuring the binding using equilibrium dialysis, ultrafiltration, and electrophoretic mobility techniques, we found that all peptides bind to the membranes with a sigmoidal dependence on the mole fraction of acidic lipid. The sigmoidal dependence (Hill coefficient greater than 1 or apparent cooperativity) is due to both electrostatics and reduction of dimensionality and can be described by a simple model that combines Gouy-Chapman-Stern theory with mass action formalism. The adjustable parameter in this model is the microscopic association constant k between a basic residue and an acidic lipid (1 less than k less than 10 M-1). The addition of alanine residues decreases the affinity of the peptides for the membranes; two alanines inserted between the basic residues reduces k 2-fold. Equivalently, the affinity of the peptide for the membrane decreases 10-fold, probably due to a combination of local electrostatic effects and the increased loss of entropy that may occur when the more massive alanine-containing peptides bind to the membrane. The arginine peptides bind more strongly than the lysine peptides: k for an arginine residue is 2-fold higher than for a lysine residue. Our results imply that a cluster of arginine and lysine residues with interspersed electrically neutral amino acids can bind a significant fraction of a cytoplasmic protein to the plasma membrane if the cluster contains more than five basic residues.     

Response of isolated sperm plasma membranes from sea urchin to egg jelly

The acrosome reaction in sea urchin sperm is induced by a glycoprotein jelly surrounding the egg and is accompanied by changes in ion permeability of sperm plasma membrane. In an attempt to learn what membrane components are involved in the response to jelly, we have begun to reassemble sperm membrane components into artificial membranes and assay for permeability changes mimicking those that occur in sperm. Jelly in sea water at concentrations that induce the acrosome reaction did not significantly change 45Ca2+ uptake of sonicated unilamellar vesicles made with soybean lipid only (ratio jelly:control uptake = 1.08 +/- 0.36 SD, n = 21). Experiments with pure lipid planar bilayers made with soybean lipid or a lipid extract from sperm and held at various voltages, also did not reveal substantial permeability changes at comparable jelly concentrations. Thus, jelly by itself does not change the conductance of a pure lipid bilayer. In contrast, significant (P----0.0005, t test for two sample means) 45Ca2+ uptake was observed with vesicles made by cosonicating soybean phospholipids and Strongylocentrotus purpuratus sperm membranes isolated by the method of Cross, N. L. [1983, J. Cell Sci. 59, 13-25] (ratio jelly: control uptake = 1.51 +/- 0.75, n = 20, 16 positive out of 20 experiments). The calcium uptake response of the mixed vesicles was also species-specific: it did not occur with jelly from Arbacia punctulata (ratio Arbacia jelly: control = 1.18 +/- 0.51; ratio Strongylocentrotus jelly: control = 1.71 +/- 0.97, n = 10; P----0.025, paired t statistic). Vesicles made with soybean lipid and an octyl glucoside extract of sperm membranes also responded to jelly with increased 45Ca2+ uptake. Our results indicate that we have the starting conditions to isolate and characterize the sperm membrane components that participate in the egg jelly induced permeability changes.     

A single mutation in the nonamyloidogenic region of islet amyloid polypeptide greatly reduces toxicity

Islet amyloid polypeptide (IAPP or amylin) is a 37-residue peptide secreted with insulin by beta-cells in the islets of Langerhans. The aggregation of the peptide into either amyloid fibers or small soluble oligomers has been implicated in the death of beta-cells during type 2 diabetes through disruption of the cellular membrane. The actual form of the peptide responsible for beta-cell death has been a subject of controversy. Previous research has indicated that the N-terminal region of the peptide (residues 1-19) is primarily responsible for the membrane-disrupting effect of the hIAPP peptide and induces membrane disruption to a similar extent as the full-length peptide without forming amyloid fibers when bound to the membrane. The rat version of the peptide, which is both noncytotoxic and nonamyloidogenic, differs from the human peptide by only one amino acid residue: Arg18 in the rat version while His18 in the human version. To elucidate the effect of this difference, we have measured in this study the effects of the rat and human versions of IAPP(1-19) on islet cells and model membranes. Fluorescence microscopy shows a rapid increase in intracellular calcium levels of islet cells after the addition of hIAPP(1-19), indicating disruption of the cellular membrane, while the rat version of the IAPP(1-19) peptide is significantly less effective. Circular dichroism experiments and dye leakage assays on model liposomes show that rIAPP(1-19) is deficient in binding to and disrupting lipid membranes at low but not at high peptide to lipid ratios, indicating that the ability of rIAPP(1-19) to form small aggregates necessary for membrane binding and disruption is significantly less than hIAPP(1-19). At pH 6.0, where H18 is likely to be protonated, hIAPP(1-19) resembles rIAPP(1-19) in its ability to cause membrane disruption. Differential scanning calorimetry suggests a different mode of binding to the membrane for rIAPP(1-19) compared to hIAPP(1-19). Human IAPP(1-19) has a minimal effect on the phase transition of lipid vesicles, suggesting a membrane orientation of the peptide in which the mobility of the acyl chains of the membrane is relatively unaffected. Rat IAPP(1-19), however, has a strong effect on the phase transition of lipid vesicles at low concentrations, suggesting that the peptide does not easily insert into the membrane after binding to the surface. Our results indicate that the modulation of the peptide orientation in the membrane by His18 plays a key role in the toxicity of nonamyloidogenic forms of hIAPP.     

Effect of cholesterol on the valinomycin-mediated uptake of rubidium into erythrocytes and phospholipid vesicles

Human erythrocytes have been treated with lipid vesicles in order to alter the cholesterol content of the cell membrane. Erythrocytes have been produced with cholesterol concentrations between 33 and 66 mol% of total lipid. The rate of valinomycin-mediated uptake of rubidium into the red cells at 37°C was lowered by increasing the cholesterol concentration of the cell membrane. Cholesterol increased the permeability to valinomycin at 20°C of small (less than 50 nm), unilamellar egg phosphatidylcholine vesicles formed by sonication. Cholesterol decreased the permeability to valinomycin at 20°C of large (up to 200 nm) unilamellar egg phosphatidylcholine vesicles formed by freezethaw plus brief sonication. It is concluded that cholesterol increases the permeability of small membrane vesicles to hydrophobic penetrating substances while above the transition temperature but has the opposite effect on large membrane vesicles and on the membranes of even larger cells.     

Effect of cholesterol on the valinomycin-mediated uptake of rubidium into erythrocytes and phospholipid vesicles.

Human erythrocytes have been treated with lipid vesicles in order to alter the cholesterol content of the cell membrane. Erythrocytes have been produced with cholesterol concentrations between 33 and 66 mol% of total lipid. The rate of valinomycin-mediated uptake of rubidium into the red cells at 37 degrees C was lowered by increasing the cholesterol concentration of the cell membrane. Cholesterol increased the permeability to valinomycin at 20 degrees C of small (less than 50 nm), unilamellar egg phosphatidylcholine vesicles formed by sonication. Cholesterol decreased the permeability to valinomycin at 20 degrees C of large (up to 200 nm) unilamellar egg phosphatidylcholine vesicles formed by freeze-thaw plus brief sonication. It is concluded that cholesterol increases the permeability of small membrane vesicles to hydrophobic penetrating substances while above the transition temperature but has the opposite effect on large membrane vesicles and on the membranes of even larger cells.     

The interaction of an antimicrobial decapeptide with phospholipid vesicles

Previously, by using combinatorial peptide libraries, we have identified activity-optimized decapeptide (KSL, KKVVFKVKFK-NH(2)), which exhibited a broad spectrum of the activity against bacteria and fungi without hemolytic activity. In order to examine lipid requirements and to understand the mode of KSL action, we investigated interactions of the peptide with vesicles consisting of various lipid compositions. KSL increased the permeability of negatively charged but not zwitterionic phospholipid membranes, and the leakage was independent on the size of encapsulated molecules (calcein, 1-aminonaphthalene-3,6,8-trisulfonic acid (ANTS)/N,N'-p-xylene bis(pyridinium) bromide (DPX), and fluorescein isothiocyanate (FITC)-dextran with different molecular weight), indicating that the peptide did not form pores or channels in this leakage process. KSL ability to permeabilize vesicles with negatively charged surface was dramatically reduced upon the addition of zwitterionic phospholipid rather than cholesterol, which revealed that the surface charge of lipid membranes played a major role in the activity and selectivity of KSL. Moreover, KSL diastereomer did not increase the permeability of negatively charged vesicles, indicating that the secondary structure of KSL was also required for membrane perturbation activity. Interestingly, KSL had an ability to cause aggregation and subsequent fusion of the acidic vesicles, which seemed to be related to the biological action. Structural studies performed by circular dichroism (CD) spectroscopy indicated that in the presence of acidic vesicles, the beta sheet structure of KSL must be required for the ability to (1) induce a leakage of dye from the acidic vesicles (2) to fuse the acidic vesicles.     

Interactions of surfactin with membrane models.

Surfactin, an acidic cyclic lipopeptide produced by strains of Bacillus subtilis, is a powerful biosurfactant possessing biological activities. Interactions of ionized surfactin (two negative charges) with lecithin vesicles have been monitored by changes in its CD spectra. These changes are more important in the presence of Ca2+ ions. We have studied the penetration of ionized surfactin into lipid monolayers. Using dimyristoyl phospholipids, the surfactin penetration is more important in DMPC than in DMPE monolayers and is greatly reduced in DMPA monolayers because of electrostatic repulsion. The surfactin penetration is lowered when the acyl chain length of the phospholipids increases. The exclusion pressure varies from 40 mN m-1 for DMPC to 30 mN m-1 for DPPC and 18 mN m-1 for egg lecithin. The presence of Ca2+ ions, which neutralize the charges of both surfactin and lipids in the subphase, leads to an important change of the penetration process that is enhanced in the case of acidic, but also of long chain (higher than C14) zwitterionic phospholipids (DPPC and lecithin). From compression isotherms of mixed surfactin/phospholipid monolayers, it appears that surfactin is completely miscible with phospholipids. The present study shows that surfactin penetrates spontaneously into lipid membranes by means of hydrophobic interactions. The insertion in the lipid membrane is accompanied by a conformation change of the peptide cycle.     

Antimicrobial activity and membrane selective interactions of a synthetic lipopeptide MSI-843

Lipopeptide MSI-843 consisting of the nonstandard amino acid ornithine (Oct-OOLLOOLOOL-NH₂) was designed with an objective towards generating non-lytic short antimicrobial peptides, which can have significant pharmaceutical applications. Octanoic acid was coupled to the N-terminus of the peptide to increase the overall hydrophobicity of the peptide. MSI-843 shows activity against bacteria and fungi at micromolar concentrations. It permeabilizes the outer membrane of Gram-negative bacterium and a model membrane mimicking bacterial inner membrane. Circular dichroism investigations demonstrate that the peptide adopts α-helical conformation upon binding to lipid membranes. Isothermal titration calorimetry studies suggest that the peptide binding to membranes results in exothermic heat of reaction, which arises from helix formation and membrane insertion of the peptide. ²H NMR of deuterated-POPC multilamellar vesicles shows the peptide-induced disorder in the hydrophobic core of bilayers. ³¹P NMR data indicate changes in the lipid head group orientation of POPC, POPG and Escherichia colitotal lipid bilayers upon peptide binding. Results from ³¹P NMR and dye leakage experiments suggest that the peptide selectively interacts with anionic bilayers at low concentrations (up to 5 mol%). Differential scanning calorimetry experiments on DiPOPE bilayers and ³¹P NMR data from E.coli total lipid multilamellar vesicles indicate that MSI-843 increases the fluid lamellar to inverted hexagonal phase transition temperature of bilayers by inducing positive curvature strain. Combination of all these data suggests the formation of a lipid-peptide complex resulting in a transient pore as a plausible mechanism for the membrane permeabilization and antimicrobial activity of the lipopeptide MSI-843.     

A novel amphipathic cell-penetrating peptide based on the N-terminal glycosaminoglycan binding region of human apolipoprotein E

In the direct cell membrane penetration, arginine-rich cell-penetrating peptides are thought to penetrate into cells across the hydrophobic lipid membranes. To investigate the effect of the amphipathic property of arginine-rich peptide on the cell-penetrating ability, we designed a novel amphipathic cell-penetrating peptide, A2-17, and its derivative, A2-17KR, in which all lysine residues are substituted with arginine residues, based on the glycosaminoglycan binding region in the N-terminal α-helix bundle of human apolipoprotein E. Isothermal titration calorimetry showed that A2-17 variants have a strong ability to bind to heparin with high affinity. Circular dichroism and tryptophan fluorescence measurements demonstrated that A2-17 variants bind to lipid vesicles with a structural change from random coil to amphipathic α-helix, being inserted into the hydrophobic membrane interiors. Flow cytometric analysis and confocal laser scanning microscopy demonstrated the great cell penetration efficiency of A2-17 variants into CHO-K1 cells when incubated at low peptide concentrations (2 μM or less), suggesting that the increased amphipathicity with α-helix formation enhances the cell membrane penetration ability of arginine-rich peptides. Interestingly, A2-17KR exhibited lower efficiency of cell membrane penetration compared to A2-17 despite of their similar binding affinity to lipid membranes. Since high peptide concentrations (typically >10 μM) are usually prerequisite for efficient cell penetration of arginine-rich peptides, A2-17 is a unique amphipathic cell-penetrating peptide that exhibits an efficient cell penetration ability even at low peptide concentrations.     

Preparation and characterization of long chain amino acid and peptide vesicle membranes

Four amino acid dicarboxylic amphiphiles which contain cysteine or homocysteine were synthesized. Each forms synthetic bilayer membranes upon hydration. Extensive sonication above the lipid phase transition temperature, 61 to 82 degrees C, produced 1000 A diameter vesicles. Treatment of the vesicles with water-soluble carbodiimides during and after sonication induced oligopeptide formation at the vesicle surface with retention of vesicle size and shape. Size exclusion chromatography indicates the products are predominantly di- to decapeptides. The permeability characteristics of the amino acid and peptide vesicles to [3H]glucose and 6-carboxyfluorescein are reported. The amino acid vesicles are among the least permeable nonpolymerized bilayer vesicles described in the literature to date. Formation of the peptide vesicles increases the membrane permeability, whereas in other polymerizable lipid vesicles the permeability decreases upon polymerization. The amino acid vesicles can be immobilized on Sephadex beads by reaction with carbodiimide. The impermeability, biodegradability, and ease of immobilization make this class of vesicles attractive materials for the encapsulation of reagents.