Technical scale production of encapsulated Saccharomyces cerevisiae and Metarhizium brunneum attractive to wireworms

Wireworms (Coleoptera: Elateridae) have recently become an increasing problem as agricultural insect pests due to the phasing out of effective control options. Entomopathogenic fungi such as Metarhizium brunneum have proven to be a promising microbial antagonist for wireworm control. Here, we tested whether the efficacy of M. brunneum can be increased through a combination with CO₂, emitted by Saccharomyces cerevisiae, as an attractant (=attract-and-kill). We aimed at a technical scale production of a formulated biological control agent offering a practical and economically feasible application for wireworm control. Therefore, a novel technical formulation process for encapsulated S. cerevisiae (Attract beads) and M. brunneum (Kill beads) was investigated. For the bead production by jet cutting, the parameters nozzle diameter, pump speed, cutting device speed and collecting distance were evaluated. In order to dry the beads in a short time while maintaining a high cell viability, different drying temperatures during fluidised-bed drying were tested and the best results were obtained with an inlet air temperature profile between 50°C and 40°C. CO₂ production of the beads in the soil was highest for co-applied Attract and Kill beads. The potential of beads to modify wireworm behaviour (Agriotes sputator) was tested in a rhizotron experiment. The Attract-and-Kill treatment (co-applied beads) significantly attracted wireworms, whereas Attract beads and Kill beads alone showed a weak, but non-significant attraction. Wireworm mortality could not be enhanced due to a low rate of mycosis from M. brunneum infection.     

Recyclable chaperone-conjugated magnetic beads for in vitro refolding of <Emphasis Type="Italic">Burkholderia cepacia</Emphasis> lipase

Polymer-coated magnetic beads have become widely used in biological applications because of their facile recovery and easily modifiable surface. Herein, we report the application of magnetic beads to in vitro refolding of B. cepacia lipase. Magnetic particles (Fe₃O₄) prepared by co-precipitation of Fe²⁺ and Fe³⁺ ions under basic conditions were subsequently coated with carboxylic acid-containing polystyrene by emulsion polymerization. The polymer-coated magnetic beads were then conjugated with molecular chaperone proteins to assist with refolding. The chaperone-conjugated magnetic beads efficiently refolded B. cepacia lipase and were easily reused. The beads showed comparable refolding activity to the soluble chaperone, and retained more than 95% of their refolding activity after five cycles of refolding B. cepacia lipase.     

Sperm binding to an egg model composed of agarose beads

A sperm-binding factor of the eggs of the sea urchin Hemicentrotus pulcherrimus or Anthocidaris crassispina, was coupled to agarose beads. Upon contact with these beads, the spermatozoa exhibited an acrosome reaction and bound to them. No binding occurred to BSA-coupled beads or to beads missing active groups. When coupled beads were pretreated with a sperm factor, which is the probable counterpart to the sperm-binding factor, they could no longer bind sperm. Reciprocal cross-binding between the above two species was not successful, but H. pulcherrimus sperm became capable of binding to A. crassispina beads if they first underwent acrosome reaction in egg water. Sperm of two of seven other echinoderms examined was able to bind to the coupled beads.     

Design of innovated lipid-based floating beads loaded with an antispasmodic drug: in-vitro and in-vivo evaluation

Context: Drotaverine hydrochloride (DRT) is used to treat gastrointestinal spasms accompanied with diarrhoea. Hence, the drug suffers from brief residence in the highly moving intestine during diarrhoea which leads to poor bioavailability and frequent dosing.

Objective: This study aimed to extend DRT residence in the stomach.

Methods: Calcium alginate floating beads were prepared using sodium alginate, isopropylmyristate (oil), and Gelucire® 43/01 (lipid) adopting emulsion gelation technique. The beads were evaluated for their floating ability, DRT entrapment efficiency and in-vitro release. Gelucire® 43/01 /oil-based beads of the selected formula were coated using ethylcellulose and different plasticizers as polyethylene glycol 400 and triethyl citrate to retard the drug release. The coated beads were re-characterized. Finally, the best formulae were investigated for their in-vivo floating ability in dogs besides their delivery to the systemic circulation compared to drug powder in human volunteers.

Results: Incorporation of Gelucire® 43/01 to oil-based beads enhanced the in-vitro performance of the beads. Coated beads prepared using drug:sodium alginate ratio of 1:3 (w/w), 20% (w/v) isopropylmyristate, 20% (w/v) Gelucire® 43/01 showed promising in-vitro performance. The beads floated for 12?h in the dogs’ stomach and produced three-fold increase of the total amount of DRT absorbed within 24?h compared to that of DRT powder.

Conclusions: Gelucire® 43/01 /isopropylmyristate-based calcium alginate floating beads coated with ethylcellulose using either PEG 400 or TEC as plasticizers proved to be a successful dosage form in extending DRT release.     

Batch fermentations with a mixed culture of lactic acid bacteria immobilized separately in κ-carrageenan locust bean gum gel beads

Summary Streptococcus salivarius subsp. thermophilus and Lactobacillus delbrueckii subsp. Bulgaricus were immobilized separately in -carrageenan-locust bean gum gel beads. The beads were prepared by a dispersion process in a two-phase system (water in oil) and two ranges of bead diameter selected by sieving (0.5–1.0 mm and 1.0–2.0 mm). Fermentations with the two strains were conducted in bench bioreactors in a supplemented whey permeate medium. Free and entrapped cells (two ranges of bead diameter and two levels of initial bead cell load) were grown in mixed culture, and carbohydrate utilization, acid production and cell growth or cell release rate measured. Fermentation rates were influenced by bead diameter and initial cell load of the beads. Beads with high initial cell density increased fermentation rates compared to low cell density beads or free cells. Smaller diameter beads (0.5–1.0 mm) showed a stable tendency (not statistically significant p _a > 0.05) towards higher cell release rates, lactose utilization, galactose accumulation and lactic acid production than did larger diameter beads (1.0–2.0 mm). Immobilization of S. salivarius subsp. thermophilus and L. delbrueckii subsp. bulgaricus in separate beads did not seem to affect protocooperation during batch fermentation, and allowed for high cell release rates into the medium.     

Survival ofalginate-ecapsulated Pseudomonas fluorescens cells in soil

Alginate-encapsulated and unencapsulated cells of Pseudomonas fluorescens Rsf were introduced into soil microcosms with and without wheat plants to evaluate bacterial survival and colonization of the rhizoplane and rhizosphere. Encapsualtion of cells in alginate amended with skim milk or with skim milk plus bentonite clay significantly enchanced long-term survival of the cells. There was a negligible effect on long-term bacterial survival when cells were encapsulated in alginate amended with TY medium or soil extract, as compared to water. Drying of beads resulted in a significant reduction in bacterial viability. After addition to soil, cells in dried beads increased in numbers and exhibited stable population densities, whereas cells added in moist beads showed stable dynamics at a higher level. Cells encapsulated in dried beads or fresh beads survived better than unencapsulated cells added to soil. Both cells in moist and dried alginate beads also survide a dry/wet cycle in soil, whereas unencapsulated cells were sensitive to these moisture fluctuations. Shortly after inoculation and 63 days after this, cells from moist beads colonized wheat roots at significantly higher levels than unencapsulated cells, whereas cells in dried beads did so at levels similat to unencapsulated cells. Cells in beads initially placed at different distance from developing root mat were able to move towards and colonize the rhizosphere, at levels of roughly 10⁴ to 10⁶ colony-forming units fo P. fluorescens R2f per gram of dry soil. Correspondence to: J. T. Trevors or J. D. van Elsas     

Prey size selection and distance estimation in foraging adult dragonflies

To determine whether perching dragonflies visually assess the distance to potential prey items, we presented artificial prey, glass beads suspended from fine wires, to perching dragonflies in the field. We videotaped the responses of freely foraging dragonflies (Libellula luctuosa and Sympetrum vicinum—Odonata, suborder Anisoptera) to beads ranging from 0.5 mm to 8 mm in diameter, recording whether or not the dragonflies took off after the beads, and if so, at what distance. Our results indicated that dragonflies were highly selective for bead size. Furthermore, the smaller Sympetrum preferred beads of smaller size and the larger Libellula preferred larger beads. Each species rejected beads as large or larger than their heads, even when the beads subtended the same visual angles as the smaller, attractive beads. Since bead size cannot be determined without reference to distance, we conclude that dragonflies are able to estimate the distance to potential prey items. The range over which they estimate distance is about 1 m for the larger Libellula and 70 cm for the smaller Sympetrum. The mechanism of distance estimation is unknown, but it probably includes both stereopsis and the motion parallax produced by head movements.     

Alginate beads provide a beneficial physical barrier against native microorganisms in wastewater treated with immobilized bacteria and microalgae

When the freshwater microalga Chlorella sorokiniana and the plant growth-promoting bacterium Azospirillum brasilense were deployed as free suspensions in unsterile, municipal wastewater for tertiary wastewater treatment, their population was significantly lower compared with their populations in sterile wastewater. At the same time, the numbers of natural microfauna and wastewater bacteria increased. Immobilization of C. sorokiniana and A. brasilense in small (2–4 mm in diameter), polymer Ca-alginate beads significantly enhanced their populations when these beads were suspended in normal wastewater. All microbial populations within and on the surface of the beads were evaluated by quantitative fluorescence in situ hybridization combined with scanning electron microscopy and direct measurements. Submerging immobilizing beads in wastewater created the following sequence of events: (a) a biofilm composed of wastewater bacteria and A. brasilense was created on the surface of the beads, (b) the bead inhibited penetration of outside organisms into the beads, (c) the bead inhibited liberation of the immobilized microorganisms into the wastewater, and (d) permitted an uninterrupted reduction of ammonium and phosphorus from the wastewater. This study demonstrated that wastewater microbial populations are responsible for decreasing populations of biological agents used for wastewater treatment and immobilization in alginate beads provided a protective environment for these agents to carry out uninterrupted tertiary wastewater treatment.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

Stomach-Specific Controlled Release Gellan Beads of Acid-Soluble Drug Prepared by Ionotropic Gelation Method

The purpose of the present work was the development and evaluation of stomach-specific controlled release mucoadhesive drug delivery system prepared by ionotropic gelation of gellan beads, containing acid-soluble drug amoxicillin trihydrate, using 3² factorial design with concentration of gellan gum and quantity of drug as variables. The study showed that beads prepared in alkaline cross-linking medium have higher entrapment efficiency than the acidic cross-linking medium. The entrapment efficiency was in the range of 32% to 46% w/w in acidic medium, which increased up to 60% to 90% w/w in alkaline medium. Batches with lowest, medium, and highest drug entrapment were subjected to chitosan coating to form a polyelectrolyte complex film. As polymer concentration increases, entrapment efficiency and particle size increases. Scanning electron microscopy revealed spherical but rough surface due to leaching of drug in acidic cross-linking solution, dense spherical structure in alkaline cross-linking solution, and rough surface of chitosan-coated beads with minor wrinkles. The in vitro drug release up to 7 h in a controlled manner following the Peppas model (r = 0.9998). In vitro and in vivo mucoadhesivity study showed that beads have good mucoadhesivity and more than 85% beads remained adhered to stomach mucosa of albino rat even after 7 h. In vitro growth inhibition study showed complete eradication of Helicobacter pylori. These results indicate that stomach-specific controlled release mucoadhesive system of amoxicillin gellan beads may be useful in H. pylori treatment.     

Production of extracellular native and foreign proteins by immobilized growing cells of Myxococcus xanthus

Summary Several strains of the protein-secreting, Gram negative bacterium Myxococcus xanthus were immobilized in carrageenan beads and the production of extracellular proteins was followed.The extracellular proteolytic activity was enhanced and concentrated in the beads. In contrast, the amount of total protein secreted by the cells was not modified by immobilization, but it was also retained and concentrated in the beads, the more, the harder the gel. The amount of slime produced by the cells did not seem to influence protein retention.Foreign proteins expressed from genes cloned in Myxococcus xanthus chromosome can be secreted into the medium by immobilized recombinant strains. A polygalacturonate lyase, expressed from the pelC gene from Erwinia chrysanthemi was only detectable outside of the beads. The pH 2.5 acid phosphatase expressed from the appA gene from Escherichia coli was secreted by immobilized cells at the same rate than did the free cells. It was predominantly found in the medium outside of the beads which represented a first purification and facilitated the continuous production of this protein by immobilized recombinant cells packed in a reactor.     

Improvement of efficiency of genetic transformation for <Emphasis Type="Italic">Dunaliella salina</Emphasis> by glass beads method

Dunaliella salina has been exploited as a new type of bioreactor due to its unique advantages. However, this bioreactor application was restricted for absence of a high-efficiency and stable transformation method at present. In the present study, the cells of D. salina were transformed by glass beads. The results of histochemical staining revealed that the GUS gene was successfully expressed in the positive transformants, and PCR and PCR-Southern blot analysis further demonstrated that the bar gene was integrated into the D. salina genome. Moreover, the three transformation methods, including glass beads, bombardment particle and electroporation, were compared for screening a high-efficiency transformation method for gene engineering of D. salina. The results showed that transformation efficiency of the glass beads was the highest, approximately 10² transformants/μg DNA. It is concluded that the established glass beads method has been demonstrated to be an optimal transformation way for D. salina.     

Improved stability and catalytic activity of graphene oxide/chitosan hybrid beads loaded with porcine liver esterase

Graphene oxide/chitosan and reduced graphene oxide/chitosan (GO/CS and RGO/CS) beads were prepared by precipitation with NaOH. Porcine liver esterase was immobilized on these beads to give GO/CS/E and RGO/CS/E beads. The optimum conditions for the maximum activity of RGO/CS/E beads were pH 8 and 50°C. The stability of the enzyme immobilized on GO/CS/E and RGO/CS/E was high in the pH range of 5–8. The GO/CS/E beads showed superior stability compared to that of the free enzyme and CS/E beads between 20 and 50°C. Kinetic analysis showed that GO/CS/E was a better catalyst than the RGO/CS/E beads with a lower K_m value of 0.9?mM. The hybrid beads also retained more than 95% activity after 10 consecutive cycles. The GO/CS/E and RGO/CS/E beads retained 84% and 87% activity after 40 days at 4°C. The GO/CS/E beads were used for the successful hydrolysis of methyl 4-hydroxy benzoate.     

Preferential binding of E. coli with type 1 fimbria to d-mannobiose with the Manα1→2Man structure

Manα1→2Man, Manα1→3Man, Manα1→4Man, and Manα1→6Man were converted to the glycosylamine derivatives. Then, they were mixed with monobenzyl succinic acid to obtain their amide derivatives. After removing the benzyl group by hydrogenation, the succinylamide derivatives were coupled with the hydrazino groups on BlotGlyco? beads in the presence of water-soluble carbodiimide. d-Mannobiose-linked beads were incubated with fluorescence-labeled Escherichia coli with type 1 fimbria, and the number of the fluorescent dots associated with the beads was counted in order to determine the binding preference among d-mannobiose isomers. The results showed that the bacteria bind strongly to Manα1→2Man1→beads, Manα1→3Man1→beads, Manα1→4Man1→beads, and Manα1→6Man1→beads, in order. In the presence of 0.1 M methyl α-d-mannopyranoside, most of the bacteria failed to bind to these beads. These results indicate that E. coli with type 1 fimbria binds to all types of d-mannobiose isomers but preferentially to Manα1→2Man disaccharide.     

Development of Gelucire 43/01 Beads of Metformin Hydrochloride for Floating Delivery

The objective of this study was to prepare and characterize beads of Gelucire 43/01 for floating delivery of metformin hydrochloride (MH). The beads were evaluated for particle size, surface morphology, percent drug entrapment, percent yield, differential scanning calorimetry (DSC), in vitro floating ability, and in vitro drug release. Aging effect on storage was evaluated using hot stage microscopy (HSM), DSC, scanning electron microscopy, and in vitro floating ability. The formed beads were sufficiently hard and spherical in shape. Photomicrographs show that the surface was porous in nature. The average particle diameter of beads was found to be in the size range of 3.85 to 3.95 mm, and percent entrapment was 83.07% to 86.13%. The beads demonstrated favorable in vitro floating ability. The analysis of DSC thermograms revealed no physical interaction between the lipid and the drug in the prepared beads. Prepared formulations showed better controlled release behavior when compared with its conventional dosage form and comparable release profile with marketed sustained release product. HSM photomicrograph showed presence of some unmelted portion even at 43°C and completely melts on 51°C in aged sample. It was found that there was no significant effect on floating ability of aged beads since it remains floats up to 8 h study period. Thus, it is concluded that beads of Gelucire 43/01 could be serve as an effective carrier for highly water-soluble antihyperglycemic drugs like MH for the controlled delivery.     

Superparamagnetic poly(methyl methacrylate) beads for nattokinase purification from fermentation broth

An effective method for purification of nattokinase from fermentation broth using magnetic poly(methyl methacrylate) (PMMA) beads immobilized with p-aminobenzamidine was proposed in this study. Firstly, magnetic PMMA beads with a narrow size distribution were prepared by spraying suspension polymerization. Then, they were highly functionalized via transesterification reaction with polyethylene glycol. The surface hydroxyl-modified magnetic beads obtained were further modified with chloroethylamine to transfer the surface amino-modified magnetic functional beads. The morphology and surface functionality of the magnetic beads were examined by scanning electron microscopy and Fourier transform infrared. An affinity ligand, p-aminobenzamidine was covalently immobilized to the amino-modified magnetic beads by the glutaraldehyde method for nattokinase purification directly from the fermentation broth. The purification factor and the recovery of the enzyme activity were found to be 8.7 and 85%, respectively. The purification of nattokinase from fermentation broth by magnetic beads only took 40 min, which shows a very fast purification of nattokinase compared to traditional purification methods.     

Chemical stimulation of phagocytosis in Amoeba proteus and the influence of external calcium

Summary The process of phagocytosis in Amoeba proteus was examined by following the uptake of Tetrahymena pyriformis and agarose beads. The ciliates are taken up in a time dependent and saturable manner. T. pyriformis apparently emits a water-soluble substance that acts as a chemoattractant to the amoebae. Plain agarose beads are not engulfed by A. proteus, but those beads having reducedglutathione with the -SH group exposed are taken up almost to the same extent as T. pyriformis. Phagocytosis of the glutathione beads is calcium-dependent with maximum bead uptake at 10^-4M Ca⁺⁺. Glutathione applied to A. proteus brings about pseudopod formation, increased phagocytosis and displacement of surface-associated calcium.     

Screening of a synthetic pentapeptide library composed of d-amino acids against fructose-1,6-biphosphate aldolase

Summary A synthetic peptide library, theoretically composed of 537 824 d-amino acid pentapeptides anchored on polystyrene beads, was prepared with each bead bearing a single pentapeptide sequence. This library was screened for interaction with fructose-1,6-biphosphate aldolase of T. brucei labelled with biotin. Affinity beads that bound the enzyme were selected with streptavidin-coated magnetic beads. A total of 19 beads were isolated and individually subjected to Edman microsequence analysis. The corresponding peptide sequences were synthesized and evaluated for enzyme activity inhibition.     

Protease production by immobilized growing cells of Serratia marcescens and Myxococcus xanthus in calcium alginate gel beads

Summary Serratia marcescens and Myxococcus xanthus cells were immobilized in calcium alginate gel beads. Immobilization under various conditions had no effect on the extracellular proteolytic activity of S. marcescens cells. Protease production seemed rather to depend on the free cells in the medium. However, the stability over time of enzyme production was enhanced, as immobilization increased protease production half-life from 5 to 12 days. On the other hand, Myxococcus xanthus produced proteases inside the gel beads which could diffuse into the medium. The proteolytic activity increased as a function of the initial cell content of the beads and of the bead inoculum. Compared to free cells, immobilized cells of Myxococcus xanthus could produce 8 times more proteolytic activity, with a very low free-cell concentration in the medium.     

Immobilized Isochrysis galbana (Haptophyta) for long-term storage and applications for feed and water quality control in clam (Meretrix lusoria) cultures

The marine microalga Isochrysisgalbana was cultivated and entrapped inalginate beads for long-term storage. Theentrapped cells were alive and maintainedtheir physiological activities after oneyear of storage in absolute darkness at4 ^°C without a liquid medium. Thenumber of cells in the beads increased morethan 32 times when they were subsequentlyre-cultured in an aqueous medium for fiveweeks, showing that they had remained aliveduring storage. TEM observations showedthat the entrapped cells reduced their cellcovering and pyrenoid size compared withthe normal free-living cells afterlong-term storage. The algal beads werealso applied to feed and water qualitycontrol in clam cultures' leading to amarked decrease in ammonium concentrations.Algal cells escaped from the beads provideda food source for the clams. This mightreduce the cost of clam culture compared totraditional culture methods. Therefore,immobilized I. galbana can be usedfor long-term preservation of algal stockin the laboratory and applied practicallyto clam cultures.