A novel method for making nested deletions and its application for sequencing of a 300 kb region of human APP locus.

We developed a novel in vitro method for making nested deletions and applied it to a large-scale DNA sequencing. A DNA fragment to be sequenced (up to 15 kb long) was cloned with a new vector possessing two unique Sfi I sites, digested by Sfi I and ligated to generate a large head-to-tail concatemer. The large concatemer was randomly fragmented by sonication and then redigested by Sfi I to separate insert and vector DNAs. The fragments of various length were then cloned into the other vector(s) specifically designed for selective cloning of insert-derived DNA fragments to generate a library of nested deletions. This method allowed a single person to generate >20 nested deletion libraries sufficient to cover 100 kb in a few days. We applied the method for sequencing of P1 clones and successfully determined the complete sequence of approximately 300 kb of the human amyloid precursor protein (APP) locus on chromosome 21 with a redundancy of 3.8, reasonably low cost and very few gaps remaining to be closed. Development of some new instruments and software is also described which makes this method more applicable for large-scale sequencing.     

Automated Gel Size Selection to Improve the Quality of Next-generation Sequencing Libraries Prepared from Environmental Water Samples

Next-generation sequencing of environmental samples can be challenging because of the variable DNA quantity and quality in these samples. High quality DNA libraries are needed for optimal results from next-generation sequencing. Environmental samples such as water may have low quality and quantities of DNA as well as contaminants that co-precipitate with DNA. The mechanical and enzymatic processes involved in extraction and library preparation may further damage the DNA. Gel size selection enables purification and recovery of DNA fragments of a defined size for sequencing applications. Nevertheless, this task is one of the most time-consuming steps in the DNA library preparation workflow. The protocol described here enables complete automation of agarose gel loading, electrophoretic analysis, and recovery of targeted DNA fragments. In this study, we describe a high-throughput approach to prepare high quality DNA libraries from freshwater samples that can be applied also to other environmental samples. We used an indirect approach to concentrate bacterial cells from environmental freshwater samples; DNA was extracted using a commercially available DNA extraction kit, and DNA libraries were prepared using a commercial transposon-based protocol. DNA fragments of 500 to 800 bp were gel size selected using Ranger Technology, an automated electrophoresis workstation. Sequencing of the size-selected DNA libraries demonstrated significant improvements to read length and quality of the sequencing reads.     

大鼠肝脏脂酶基因的PCR扩增、序列分析和克隆

报导了应用聚合酶链式反应（PCR）技术,扩增大鼠肝脏脂酶基因及其克隆和序列分析的结果．经31个循环的扩增,得到大鼠肝脏脂酶及其N端结构域的cDNA,前者为1508bp的片段,后者为1076bp的片段．克隆后,对此二片段进行了限制性内切酶物理图谱分析,测定了DNA序列,并已将它们克隆到表达载体pGT－d中．     

A new technique for selective identification and mapping of enhancers within long genomic sequences

We report a new experimental method of direct selection, identification, and mapping of potential enhancer sequences within extended stretches of genomic DNA. The method allows simultaneous cloning of a quantity of sequences instead of tedious screening of the separate ones, thus providing a robust and high-throughput approach to the mapping of enhancers. The selection procedure is based on the ability of such sequences to activate a minimal promoter that drives expression of a selective gene. To this end a mixture of short DNA fragments derived from the segment of interest was cloned in a retroviral vector containing the neomycin phosphotransferase II gene under control of a cytomegalovirus (CMV) minimal promoter. The pool of retroviruses obtained was used to infect HeLa cells and then to select neomycin-resistant colonies containing constructs with enhancer-like sequences. The pool of the genomic fragments was rescued by PCR and cloned, forming a library of the potential enhancers. Fifteen enhancer-like fragments were selected from 1-Mb human genome locus, and enhancer activity of 13 of them was verified in a transient transfection reporter gene assay. The sequences selected were found to be predominantly located near 5' regions of genes or within gene introns.     

Correlation Between DNase I Hypersensitive Site Distribution and Gene Expression in HeLa S3 Cells

Mapping DNase I hypersensitive sites (DHSs) within nuclear chromatin is a traditional and powerful method of identifying genetic regulatory elements. DHSs have been mapped by capturing the ends of long DNase I-cut fragments (>100,000 bp), or 100-1200 bp DNase I-double cleavage fragments (also called double-hit fragments). But next generation sequencing requires a DNA library containing DNA fragments of 100-500 bp. Therefore, we used short DNA fragments released by DNase I digestion to generate DNA libraries for next generation sequencing. The short segments are 100-300 bp and can be directly cloned and used for high-throughput sequencing. We identified 83,897 DHSs in 2,343,479 tags across the human genome. Our results indicate that the DHSs identified by this DHS assay are consistent with those identified by longer fragments in previous studies. We also found: (1) the distribution of DHSs in promoter and other gene regions of similarly expressed genes differs among different chromosomes; (2) silenced genes had a more open chromatin structure than previously thought; (3) DHSs in 3'untranslated regions (3'UTRs) are negatively correlated with level of gene expression.     

PCR-based unidirectional deletion method for creation of comprehensive cDNA libraries

A new strategy for the rapid creation of DNA deletion libraries using a simple PCR-based method is presented. Unidirectional deletion fragments are created and may be cloned into any vector system without the constraint of using restriction enzymes. Our strategy combines methodologies from DNA sequencing, PCR, and homologous recombination (either in vivo or in vitro) to allow for the creation of a library containing fragments representing all possible deletions of a given cDNA. Using this strategy we have successfully constructed a deletion library of the cDNA encoding for the lumenal domain of yeast Ire1p, and have shown that resulting fragments range from 100 bp to the full length cDNA (1557 bp). This method is simple, inexpensive, and can easily be adapted for automated high-throughput research.     

A minichromosome-like structure in wheat embryos

A crude nuclear fraction of resting wheat embryos was used as the source of putative plant minichromosomes: unique DNA sequences the size of genes and flanked by telomere-type repeats. Preliminary separation of low-molecular-weight DNA species from chromosomal DNA (Hirt's method), velocity sedimentation, and isopycnic centrifugation were followed by PCR amplification of minichromosome-like sequences. The most abundant PCR product was cloned and sequenced. In addition to telomeric repeats (defined by a PCR primer), which were the expected sequences, the linear DNA molecule (637 pb) contained an ARS-like element, RAP1-binding site, and two relatively long ORFs. The whole sequence seems to represent a naturally occurring plant minichromosome.     

一种通用高效的复杂载体构建的新方法

文章报道了一种简便、通用、高效的复杂载体构建方法。此法是在PCR引物设计时,在目的片段5′端加上随机设计的接头,利用PCR克隆目的片段,再用T4 DNA聚合酶3′→5′外切酶活性处理PCR克隆目的片段,产生多个首尾相匹配的粘性末端,进行多片段定向连接、转化、重组子鉴定。以7片段拼接的水稻单交换质体定点整合表达载体pRSMGA的构建为例,应用上述方法构建只需做两次连接、转化,且其重组、转化效率高。数10次实验证明：这是一种简便、通用、高效的复杂构建载体的方法,该法至今尚未见报道。      

HIV-1 Gag多表位嵌合基因的构建及表达蛋白的抗体制备

旨在通过构建Gag的抗原多表位融合基因及在原核系统的高表达,为HIV诊断及可能的疫苗制备提供试验基础。选定HIV-1 Gag基因中3个片段包含较多抗原表位的区域,设计带有酶切位点的引物,用PCR的方法从HIV-1HXB2全基因扩增编码这3个片段的基因序列,通过质粒提取、酶切、测序方法鉴定基因片段的正确性,SDS-PAGE和Western blotting测定融合蛋白的表达,并免疫动物制备相应抗体。结果显示,构建的HIV-1 Gag多表位嵌合基因的原核表达质粒,酶切和测序结果表明基因序列正确,基因全长576bp。在大肠杆菌BL21(DE3)中高效表达的重组蛋白分子量为27kD,以包涵体的形式存在。纯化目的蛋白免疫家兔,制备多克隆抗体IgG。ELISA和免疫荧光方法检测显示制备的多克隆抗体能具有特异性反应。成功构建和高表达了HIV-1 Gag多表位融合蛋白,纯化蛋白制备的抗体与HIV-1Gag有特异性结合。为进一步研究HIV-1奠定了试验基础。     

Solid-phase cloning for high-throughput assembly of single and multiple DNA parts

We describe solid-phase cloning (SPC) for high-throughput assembly of expression plasmids. Our method allows PCR products to be put directly into a liquid handler for capture and purification using paramagnetic streptavidin beads and conversion into constructs by subsequent cloning reactions. We present a robust automated protocol for restriction enzyme based SPC and its performance for the cloning of >60 000 unique human gene fragments into expression vectors. In addition, we report on SPC-based single-strand assembly for applications where exact control of the sequence between fragments is needed or where multiple inserts are to be assembled. In this approach, the solid support allows for head-to-tail assembly of DNA fragments based on hybridization and polymerase fill-in. The usefulness of head-to-tail SPC was demonstrated by assembly of >150 constructs with up to four DNA parts at an average success rate above 80%. We report on several applications for SPC and we suggest it to be particularly suitable for high-throughput efforts using laboratory workstations.     

Microsatellite loci from the house wren (Troglodytes aedon)

We cloned seven microsatellite loci from house wrens (Troglodytes aedon) using a biotin enrichment protocol. Starting with fragments generated using DOP–PCR, fragments containing microsatellite motifs AC and AAC were captured using biotinylated probes and streptavidin coated magnetic particles. Captured fragments were cloned into plasmids; prior to sequencing, the plasmids were screened for microsatellites using a simple PCR approach. Five of the loci showed variation in a sample of nine individuals.     

Precise detection and tracing of Trichoderma hamatum 382 in compost-amended potting mixes by using molecular markers

Randomly amplified polymorphic DNA (RAPD) analysis and the PCR assay were used in combination with dilution plating on a semiselective medium to detect and enumerate propagules of Trichoderma hamatum 382, a biocontrol agent utilized in compost-amended mixes. Distinct and reproducible fingerprints were obtained upon amplification of purified genomic DNA of T. hamatum 382 with the random primers OPE-16, OPH-19, and OPH-20. Three amplified DNA fragments of 0.35 (OPE-16(0.35)), 0.6 (OPH-19(0.6)), and 0.65 (OPH-20(0.65)) kb were diagnostic for T. hamatum 382, clearly distinguishing it from 53 isolates of four other Trichoderma spp. tested. Some isolates of T. hamatum shared these low-molecular-weight fragments with T. hamatum 382. However, RAPD analysis of isolates of T. hamatum with all three random primers used in consecutive PCR tests distinguished T. hamatum 382 from other isolates of T. hamatum. These three RAPD amplicons were cloned and sequenced, and pairs of oligonucleotide primers for each cloned fragment were designed. Use of the primers in the PCR assay resulted in the amplification of DNA fragments of the same size as the cloned RAPD fragments from genomic DNA of T. hamatum 382. A combination of dilution plating on a semiselective medium for Trichoderma spp. and PCR, with the RAPD primers OPH-19, OPE-16, and OPH-20 or the three sequence-characterized primers, was used successfully to verify the presence of T. hamatum 382 propagules in nine different soil, compost, and potting mix samples. All 23 Trichoderma isolates recovered on semiselective medium from commercial potting mixes fortified with T. hamatum 382 were identified as T. hamatum 382, whereas 274 Trichoderma isolates recovered from the other nine samples were negative in the PCR assay. Thus, this highly specific combination of techniques allowed detection and enumeration of propagules of T. hamatum 382 in fortified compost-amended potting mixes. Sequence-characterized amplified region markers also facilitated the development of a very simple procedure to amplify DNA of T. hamatum 382 directly from fortified compost-amended potting mixes.     

A computational method for estimating the PCR duplication rate in DNA and RNA-seq experiments

Background

PCR amplification is an important step in the preparation of DNA sequencing libraries prior to high-throughput sequencing. PCR amplification introduces redundant reads in the sequence data and estimating the PCR duplication rate is important to assess the frequency of such reads. Existing computational methods do not distinguish PCR duplicates from “natural” read duplicates that represent independent DNA fragments and therefore, over-estimate the PCR duplication rate for DNA-seq and RNA-seq experiments.

Results

In this paper, we present a computational method to estimate the average PCR duplication rate of high-throughput sequence datasets that accounts for natural read duplicates by leveraging heterozygous variants in an individual genome. Analysis of simulated data and exome sequence data from the 1000 Genomes project demonstrated that our method can accurately estimate the PCR duplication rate on paired-end as well as single-end read datasets which contain a high proportion of natural read duplicates. Further, analysis of exome datasets prepared using the Nextera library preparation method indicated that 45–50% of read duplicates correspond to natural read duplicates likely due to fragmentation bias. Finally, analysis of RNA-seq datasets from individuals in the 1000 Genomes project demonstrated that 70–95% of read duplicates observed in such datasets correspond to natural duplicates sampled from genes with high expression and identified outlier samples with a 2-fold greater PCR duplication rate than other samples.

Conclusions

The method described here is a useful tool for estimating the PCR duplication rate of high-throughput sequence datasets and for assessing the fraction of read duplicates that correspond to natural read duplicates. An implementation of the method is available at https://github.com/vibansal/PCRduplicates.

     

On-line integration of PCR and cycle sequencing in capillaries: from human genomic DNA directly to called bases

A fully integrated system has been developed for genetic analysis based on direct sequencing of polymerase chain reaction (PCR) products. The instrument is based on a serially connected fused-silica capillary assembly. The technique involves the use of microreactors for small-volume PCR and for dye-terminator cycle-sequencing reaction, purification of the sequencing fragments, and separation of the purified DNA ladder. Four modifications to the normal PCR protocol allow the elimination of post-reaction purification. The use of capillaries as reaction vessels significantly reduced the required reaction time. True reduction in reagent cost is achieved by a novel sample preparation procedure where nanoliter volumes of templates and sequencing reaction reagent are mixed using a micro- syringe pump. The remaining stock solution of sequencing reaction reagent can be reused without contamination. The performance of the whole system is demonstrated by one-step sequencing of a specific 257-bp region in human chromosome DNA. Base calling for the smaller fragments is limited only by the resolving power of the gel. The system is simple, reliable and fast. The entire process from PCR to DNA separation is completed in ~4 h. Feasibilities for development of a fully automated sequencing system in the high-throughput format and future adaptation of this concept to a microchip are discussed.     

DEFOG: a practical scheme for deciphering families of genes

We developed a novel efficient scheme, DEFOG (for "deciphering families of genes"), for determining sequences of numerous genes from a family of interest. The scheme provides a powerful means to obtain a gene family composition in species for which high-throughput genomic sequencing data are not available. DEFOG uses two key procedures. The first is a novel algorithm for designing highly degenerate primers based on a set of known genes from the family of interest. These primers are used in PCR reactions to amplify the members of the gene family. The second combines oligofingerprinting of the cloned PCR products with clustering of the clones based on their fingerprints. By selecting members from each cluster, a low-redundancy clone subset is chosen for sequencing. We applied the scheme to the human olfactory receptor (OR) genes. OR genes constitute the largest gene superfamily in the human genome, as well as in the genomes of other vertebrate species. DEFOG almost tripled the size of the initial repertoire of human ORs in a single experiment, and only 7% of the PCR clones had to be sequenced. Extremely high degeneracies, reaching over a billion combinations of distinct PCR primer pairs, proved to be very effective and yielded only 0.4% nonspecific products.     

大肠杆菌glgC基因的克隆及原核表达

以大肠杆菌BL21染色体DNA为模板,根据glgC基因的全序列设计了1对引物,在优化的PCR反应条件下扩增出了glgC基因片段,测序结果显示该片段大小为1296 bp,编码432个氨基酸残基。将该基因克隆到原核表达载体pET-28a-c( )中,重组载体pET-glgC转化至大肠杆菌BL21(DE3),经IPTG诱导后,SDS-PAGE电泳鉴定,得到了与理论推算的glgC基因表达产物分子质量(约53 kD)相符的特异蛋白条带。     

Long PCR Product Sequencing (LoPPS): a shotgun-based approach to sequence long PCR products

Here we describe a practical procedure for sequencing long PCR products. The method relies on ultrasonic shearing of PCR products, resulting in fragments 700-1,000 nt long. Termini are subsequently repaired to obtain blunt ends and 3' A-overhangs are added before TA cloning. A predetermined number of clones are sequenced using an insert-independent primer to obtain an overlapping contig covering the full length of the PCR product. This method is cost effective and enables the complete sequencing of any large PCR product in a high-throughput format. Processing of amplified DNA requires 3 h handling time prior to the ligation step, and the clone library is available 2 d later. The complete sequence information is obtained approximately 5 d after the PCR step, depending on the sequencing procedure adopted.     

Multiplex PCR screening of soil isolates for novel Bacillus-related lineages

A16S rDNA multiplex PCR-based high-throughput protocol is presented to screen bacterial isolates in large amounts for the appearance of novel lineages of bacteria, especially hitherto unknown Bacillus relatives. The 16S rDNAs of 4224 isolates from a comprehensive cultivation campaign were screened for similarity to predominant uncultured soil bacteria. Soil suspensions were plated in serial dilutions on various media. After 2, 4 and 6 weeks, colonies were collected with toothpicks and transferred to microtiterplates for cell lysis and storage plates for subculture. Cell lysis was a simple freeze-heating cycle in distilled water. The multiplex PCR was adapted to operate sufficiently for Gram positives under these conditions. Approximately 10.6% of all picked colonies reacted with a primer targeting a Bacillus fraction containing novel Bacillus benzoevorans-relatives previously detected as predominant soil bacteria by culture-independent studies. From these 446 colonies detected by multiplex PCR, 363 (81.4%) could be successfully used for continued subculture and 16S rDNA sequencing. All identification was done by 16S rDNA sequencing. This revealed that more than 60% of them represented a variety of candidates for potentially new species. Twelve colonies were identified as almost identical matches to 16S rDNA sequences of hitherto uncultured but apparently predominant soil bacteria cloned from directly extracted soil DNA. Also, novel lineages of unpredicted phylogenetic diversity like novel Paenibacillus, Sporosarcina and even Xanthomonads were represented.     

Single nucleotide polymorphism (SNP) allele frequency estimation in DNA pools using Pyrosequencing

Identifying the genetic variation underlying complex disease requires analysis of many single nucleotide polymorphisms (SNPs) in a large number of samples. Several high-throughput SNP genotyping techniques are available; however, their cost promotes the use of association screening with pooled DNA. This protocol describes the estimation of SNP allele frequencies in pools of DNA using the quantitative sequencing method Pyrosequencing (PSQ). PSQ is a relatively recently described high-throughput method for genotyping, allele frequency estimation and DNA methylation analysis based on the detection of real-time pyrophosphate release during synthesis of the complementary strand to a PCR product. The protocol involves the following steps: (i) quantity and quality assessment of individual DNA samples; (ii) DNA pooling, which may be undertaken at the pre- or post-PCR stage; (iii) PCR amplification of PSQ template containing the variable sequence region of interest; and (iv) PSQ to determine the frequency of alleles at a particular SNP site. Once the quantity and quality of individual DNA samples has been assessed, the protocol usually requires a few days for setting up pre-PCR pools, depending on sample number. After PCR amplification, preparation and analysis of PCR amplicon by PSQ takes 1 h per plate.     

Dinucleotide microsatellite loci isolated from flowering dogwood (Cornus florida L.)

We report eight variable dinucleotide microsatellite loci cloned from flowering dogwood (Cornus florida L.) using a biotin enrichment protocol. Degenerate oligonucleotide primer‐polymerase chain reaction (DOP‐PCR) was used to generate a population of DNA fragments, from which adenine‐cytosine dinucleotide (AC) and adenine‐guanine dinucleotide (AG) repeats were captured using biotinylated probes and streptavidin coated magnetic particles. The captured fragments were cloned into plasmids, and the plasmid library was screened for microsatellites using a simple PCR technique. Selected plasmids were sequenced, and PCR primers were designed and optimized using a thermal‐gradient thermocycler. The loci reported are highly variable with an average of 9.25 allele per locus and an average heterozygosity of 0.84.