Properties of an ordered ring structure formed by recombinant Treponema pallidum surface antigen 4D.

Ultrastructural and biochemical studies of a recombinant Treponema pallidum surface antigen designated 4D have been conducted due to its likely biological significance. Electron microscopy demonstrated that the 190-kilodalton (kDa) 4D molecule is an ordered ring structure of 10-nm diameter. The 90-kDa proteinase K-treated 4D is an ordered ring structure of 6-nm diameter. Evidence is presented that the 190-kDa ordered ring is maintained by noncovalent bonds; 19-kDa monomers can reassociate in vitro to reform a 190-kDa molecule. Amino acid composition analysis of 190-kDa 4D showed that the molecule is composed of 45% hydrophobic residues. Evidence relating the structure of the 4D ordered ring to its potential role in the pathogenesis of syphilis is discussed.     

Immunization of rabbits with recombinant Treponema pallidum surface antigen 4D alters the course of experimental syphilis

Rabbits immunized with the protease resistant recombinant Treponema pallidum surface-associated Ag 4D showed an altered course of experimental syphilis after intradermal challenge with virulent T. pallidum. Vaccination trials using three different protocols were examined. In one experiment, a combined i.m.-i.v. immunization protocol was compared with an i.m. injection schedule. Four of five rabbits immunized by the i.m.-i.v. protocol developed morphologically atypical lesions at each of 16 sites, whereas the i.m. injected animals showed no evidence of attenuated disease. Moreover, immunization by both protocols elicited equally high ELISA titers of 4D-specific IgG antibody suggesting that cellular immune mechanisms may have been involved. In an effort to augment cell-mediated responses to 4D, seven rabbits received i.v. immunizations with an emulsion of 4D, purified BCG cell wall skeletons, and trehalose dimycolate in an oil-microdroplet form (4D-cell wall skeleton-trehalose dimycolate). Splenic lymphocytes from three representative immunized animals had a strong in vitro proliferative response to 4D as compared to controls. Further, all animals developed high anti-4D titers in response to immunization. After challenge with virulent T. pallidum, six of the seven rabbits developed an early cutaneous response (3-8 days) at the sites of inoculation consistent with a hypersensitivity reaction followed by morphologically atypical lesions. Aspirates from each of three representative atypical lesions were devoid of treponemes by darkfield examination at day 14, whereas motile T. pallidum were observed in aspirates from four of five control sites. Between days 20 and 24, lesions in the 4D-cell wall skeleton-trehalose dimycolate immunized rabbits began to enlarge and become more typical in appearance; aspirates from six of seven representative lesions were darkfield positive. We conclude that 1) immunization with the r4D Ag alters the course of experimental syphilis in a manner consistent with previously defined parameters of partial protection and 2) immunizations protocols containing an i.v. component are more effective than protocols using the i.m. route alone.     

Role of disulfide bonds in the stability of recombinant manganese peroxidase.

Phanerochaete chrysosporium manganese peroxidase (MnP) [isoenzyme H4] was engineered with additional disulfide bonds to provide structural reinforcement to the proximal and distal calcium-binding sites. This rational protein engineering investigated the effects of multiple disulfide bonds on the stabilization of the enzyme heme environment and oxidase activity. Stabilization of the heme environment was monitored by UV-visible spectroscopy based on the electronic state of the alkaline transition species of ferric and ferrous enzyme. The optical spectral data confirm an alkaline transition to hexacoordinate, low-spin heme species for native and wild-type MnP and show that the location of the engineered disulfide bonds in the protein can have significant effects on the electronic state of the enzyme. The addition of a single disulfide bond in the distal region of MnP resulted in an enzyme that maintained a pentacoordinate, high-spin heme at pH 9.0, whereas MnP with multiple engineered disulfide bonds did not exhibit an increase in stability of the pentacoordinate, high-spin state of the enzyme at alkaline pH. The mutant enzymes were assessed for increased stability by incubation at high pH. In comparison to wild-type MnP, enzymes containing engineered disulfide bonds in the distal and proximal regions of the protein retained greater levels of activity when restored to physiological pH. Additionally, when assayed for oxidase activity at pH 9.0, proteins containing engineered disulfide bonds exhibited slower rates of inactivation than wild-type MnP.     

Role of disulfide bonds in regulating antigen processing and epitope selection

Knowledge of the events governing Ag processing and epitope selection within APC is key to the development of novel immunotherapeutic strategies for infectious diseases, cancer, and autoimmunity. The influence of disulfides and Ag reduction on the hierarchy of epitope presentation via MHC class II molecules was investigated through studies of a self Ag, IgG kappa. HLA-DR4(+) B cells preferentially present an immunodominant IgG-derived epitope, kappaI, relative to a subdominant kappaII peptide. kappaI contains a cysteine masked within the native Ag via an intrachain disulfide, the latter of which is reduced during Ag processing. Mutagenesis of this cysteine as well as others within kappa minimally perturbed the abundance and overall conformation of IgG. Yet, disruptions in disulfide bonding within this Ag influenced the selective display of class II-restricted dominant and subdominant T cell epitopes. Presentation of the kappaI epitope from both native and variant IgG was dependent upon cellular expression of IFN-gamma-inducible lysosomal thiol reductase. These studies indicate that disulfide bonds regulate Ag processing both locally and at distant sites, thus influencing epitope selection within the class II pathway.     

Role of disulfide bonds in the structure and activity of human insulin

Insulin contains two inter-chain disulfide bonds between the A and B chains (A7-B7 and A20-B19), and one intra-chain linkage in the A chain (A6-A11). To investigate the role of each disulfide bond in the structure, function and stability of the molecule, three des mutants of human insulin, each lacking one of the three disulfide bonds, were prepared by enzymatic conversion of refolded mini-proinsulins. Structural and biological studies of the three des mutants revealed that all three disulfide bonds are essential for the receptor binding activity of insulin, whereas the different disulfide bonds make different contributions to the overall structure of insulin. Deletion of the A20-B19 disulfide bond had the most substantial influence on the structure as indicated by loss of ordered secondary structure, increased susceptibility to proteolysis, and markedly reduced compactness. Deletion of the A6-A11 disulfide bond caused the least perturbation to the structure. In addition, different refolding efficiencies between the three des mutants suggest that the disulfide bonds are formed sequentially in the order A20-B19, A7-B7 and A6-A11 in the folding pathway of proinsulin.     

Role of disulfide bonds for the structure and folding of proguanylin

The intestinal peptide hormone guanylin circulates mainly as its corresponding prohormone of 94 amino acids and is the first identified endogenous ligand of intestinal guanylyl cyclase C. While the prohormone is biologically inactive, it is processed to the fully functional form with 15 amino acid residues corresponding to the COOH terminus of the precursor protein. In addition to this inactivation of the hormone region, the prosequence makes an essential contribution to the disulfide-coupled folding of the hormone. On the basis of the recently determined solution structure of proguanylin, explanations for these functions of the prosequence were found, indicating that interstrand contacts between the NH2-terminal beta-hairpin of the prosequence and the COOH-terminal hormone region are crucial for formation of the correct disulfide bonds of guanylin. To further investigate the role of individual disulfide bonds upon stabilization of the overall three-dimensional structure of proguanylin and to test the assumption of a direct effect of the prosequence on the structure of the hormone region, we studied the cysteine double mutant proteins proguanylin-C48S/C61S and proguanylin-C86S/C94S. Disulfide determination as well as CD and NMR spectroscopy of proguanylin-C48S/C61S reveals an essential function of the Cys48-Cys61 disulfide bond for the stability of the hydrophobic core and thereby for the stability of the overall three-dimensional structure of proguanylin. Furthermore, sequence specific resonance assignment of the second disulfide deletion mutant, proguanylin-C86S/C94S, and comparison of the NMR spectra of this protein with those of the wild-type protein demonstrate that the rigid helical core structure of proguanylin is not affected by the mutation. Additionally, analysis of the interstrand contacts between the termini reveals a direct effect of the prosequence on the conformation of the hormone region. On the basis of these results, we propose a cooperative mechanism that leads to formation of the correct disulfide pattern of guanylin.     

PDZ domains determine the native oligomeric structure of the DegP (HtrA) protease

DegP (HtrA) is a periplasmic heat shock serine protease of Escherichia coli that degrades misfolded proteins at high temperatures. Biochemical and biophysical experiments have indicated that the purified DegP exists as a hexamer. To examine whether the PDZ domains of DegP were required for oligomerization, we constructed a DegP variant lacking both PDZ domains. This truncated variant, DegPDelta, exhibited no proteolytic activity but exerted a dominant-negative effect on growth at high temperatures by interfering with the functional assembly of oligomeric DegP. Thus, the PDZ domains contain information necessary for proper assembly of the functional hexameric structure of DegP.     

Disulfide bonds in native and recombinant fish growth hormones.

Disulfide linkages were characterized for the first time in a fish growth hormone. Trypsin digestion of chum salmon growth hormone, followed by mass spectrometry established that Cys-49 is linked to Cys-161, while Cys-178 is linked to Cys-186. This is analogous to the big loop, little loop pattern found in human growth hormone. Ninety-three percent of the primary structure of a recombinant rainbow trout growth hormone whose cDNA codes for the same amino acid sequence as chum salmon growth hormone was confirmed by mass spectrometric peptide mapping.     

Stabilization of the structure of horse plasma vitamin D binding protein by disulfide bonds.

Vitamin D binding protein (DBP) was isolated from horse plasma in a four-step procedure that involved Affi-Gel Blue affinity chromatography, gel filtration, hydroxylapatite chromatography, and anion exchange high-pressure liquid chromatography. The yield of DBP from 80 mL of plasma was 6-7 mg. Horse plasma DBP closely resembles other plasma DBPs, being a tryptophan-free protein of Mr 53,000. It is able to bind to and block the polymerization of monomeric actin. The secondary structure of DBP was calculated from circular dichroism measurements to be 39% alpha-helix, 42% beta-sheet, and 19% random coil. Circular dichroism and fluorescence studies revealed that the disulfide bonds of DBP contribute substantial structural stabilization to the molecule with respect to thermal denaturation. The thermal stability of DBP can be used to advantage. Incorporation of a brief treatment at 70 degrees C into the preparative scheme enables omission of one chromatographic step, without detectable alteration of the purified product.     

Organization of the ribosomal RNA genes in Treponema phagedenis and Treponema pallidum.

The genomic DNA fragment which contains ribosomal RNA (rRNA) genes for Treponema phagedenis was cloned into bacteriophage vector lambda EMBL3. A restriction map of the fragment was constructed and the organization of the rRNA genes was determined. The fragment contained at least one copy of the 16S, 23S and 5S sequences and the genes are arranged in the order 16S-23S-5S. Southern hybridization using radiolabeled rRNA gene probes to genomic DNA from T. phagedenis strain Reiter and T. pallidum strain Nichols showed that these organisms have two radioactive fragments which hybridize to the probes in their genome. These results suggest that both pathogenic and non-pathogenic strains of Treponema may carry at least two sets of rRNA genes on their chromosomes.     

Role of intermolecular disulfide bonds of the organic solvent-stable PST-01 protease in its organic solvent stability

The PST-01 protease is secreted by the organic solvent-tolerant microorganism Pseudomonas aeruginosa PST-01 and is stable in the presence of various organic solvents. Therefore, the PST-01 strain and the PST-01 protease are very useful for fermentation and reactions in the presence of organic solvents, respectively. The organic solvent-stable PST-01 protease has two disulfide bonds (between Cys-30 and Cys-58 and between Cys-270 and Cys-297) in its molecule. Mutant PST-01 proteases in which one or both of the disulfide bonds were deleted were constructed by site-directed mutagenesis, and the effect of the disulfide bonds on the activity and the various stabilities was investigated. The disulfide bond between Cys-270 and Cys-297 in the PST-01 protease was found to be essential for its activity. The disulfide bond between Cys-30 and Cys-58 played an important role in the organic solvent stability of the PST-01 protease.     

Isolation of the outer membranes from Treponema pallidum and Treponema vincentii.

The outer membranes from Treponema pallidum subsp. pallidum and Treponema vincentii were isolated by a novel method. Purified outer membranes from T. pallidum and T. vincentii following sucrose gradient centrifugation banded at 7 and 31% (wt/wt) sucrose, respectively. Freeze fracture electron microscopy of purified membrane vesicles from T. pallidum and T. vincentii revealed an extremely low density of protein particles; the particle density of T. pallidum was approximately six times less than that of T. vincentii. The great majority of T. vincentii lipopolysaccharide was found in the outer membrane preparation. The T. vincentii outer membrane also contained proteins of 55 and 65 kDa. 125I-penicillin V labeling demonstrated that t. pallidum penicillin-binding proteins were found exclusively with the protoplasmic cylinders and were not detectable with purified outer membrane material, indicating the absence of inner membrane contamination. Isolated T. pallidum outer membrane was devoid of the 19-kDa 4D protein and the normally abundant 47-kDa lipoprotein known to be associated with the cytoplasmic membrane; only trace amounts of the periplasmic endoflagella were detected. Proteins associated with the T. pallidum outer membrane were identified by one- and two-dimensional electrophoretic analysis using gold staining and immunoblotting. Small amounts of strongly antigenic 17- and 45-kDa proteins were detected and shown to correspond to previously identified lipoproteins which are found principally with the cytoplasmic membrane. Less antigenic proteins of 65, 31 (acidic pI), 31 (basic pI), and 28 kDa were identified. Compared with whole-organism preparations, the 65- and the more basic 31-kDa proteins were found to be highly enriched in the outer membrane preparation, indicating that they may represent the T. pallidum rare outer membrane proteins. Reconstitution of solubilized T. pallidum outer membrane into lipid bilayer membranes revealed porin activity with two estimated channel diameters of 0.35 and 0.68 nm based on the measured single-channel conductances in 1 M KCl of 0.40 and 0.76 nS, respectively.     

Role of individual cysteine residues and disulfide bonds in the structure and function of Aspergillus ribonucleolytic toxin restrictocin.

Restrictocin, produced by the fungus Aspergillus restrictus, belongs to the group of ribonucleolytic toxins called ribotoxins. It specifically cleaves a single phosphodiester bond in a conserved stem and loop structure in the 28S rRNA of large ribosomal subunit and potently inhibits eukaryotic protein synthesis. Restrictocin contains 149 amino acid residues and includes four cysteines at positions 5, 75, 131, and 147. These cysteine residues are involved in the formation of two disulfide bonds, one between Cys 5 and Cys 147 and another between Cys 75 and Cys 131. In the current study, all four cysteine residues were changed to alanine individually and in different combinations by site-directed mutagenesis so as to remove one or both the disulfides. The mutants were expressed and purified from Escherichia coli. Removal of any cysteine or any one of the disulfide bonds individually did not affect the ability of the toxin to specifically cleave the 28S rRNA or to inhibit protein synthesis in vitro. However, the toxin without both disulfide bonds completely lost both ribonucleolytic and protein synthesis inhibition activities. The active mutants, containing only one disulfide bond, exhibited relatively high susceptibility to trypsin digestion. Thus, none of the four cysteine residues is directly involved in restrictocin catalysis; however, the presence of any one of the two disulfide bonds is absolutely essential and sufficient to maintain the enzymatically active conformation of restrictocin. For maintenance of the unique stability displayed by the native toxin, both disulfide bonds are required.     

Location and the primary structure around the disulfide bonds in cholera toxin.

The sequence of the four tryptic peptides containing cysteine from cholera toxin has been determined. The cysteine residue in peptide A₂, forms a disulfide bridge with the cysteine in the A₁ chain located near the NH₂-terminus. The region around the latter cysteine residue is characterized by a high content of proline. One of the cysteine residues that form the intrachain disulfide bond in subunit B has been located at position 9 in this subunit.     

Identification and characterization of the gyrB gene from Treponema pallidum subsp. pallidum

The nucleotide sequence of a DNA gyrase B subunit gene (gyrB) from Treponema pallidum has been determined. Southern blot analysis of T. pallidum chromosomal DNA indicated that this gene is present as a single copy. The organization of genes flanking the gyrB gene is unique in comparison to that of other bacteria. The gyrB gene encodes a 637 amino acid protein whose deduced sequence has a high degree of homology with type-II topoisomerase ATPase subunits (GyrB and ParE). Five type-II topoisomerase motifs, an ATP-binding site (Walker A), and amino acid residues that putatively interact with ATP, are highly conserved in the T. pallidum GyrB protein.     

Solubilization and folding of a fully active recombinant Gaussia luciferase with native disulfide bonds by using a SEP-Tag

Gaussia luciferase (GLuc) is the smallest known bioluminescent protein and is attracting much attention as a potential reporter protein. However, its 10 disulfide bond forming cysteines have hampered the efficient production of recombinant GLuc and thus limited its use in bio-imaging application. Here, we demonstrate that the addition of a short solubility enhancement peptide tag (SEP-Tag) to the C-terminus of GLuc (GLuc-C9D) significantly increased the fraction of soluble protein at a standard expression temperature. The expression time was much shorter, and the final yield of GLuc-C9D was significantly higher than with our previous pCold expression system. Reversed phase HPLC indicated that the GLuc-C9D variant folded with a single disulfide bond pattern after proper oxidization. Further, the thermal denaturation of GLuc-C9D was completely reversible, and its secondary structure content remained unchanged until 40°C as assessed by CD spectroscopy. The (1)H-NMR spectrum of GLuc indicated sharp well dispersed peaks typical for natively folded proteins. GLuc-C9D bioluminescence activity was strong and fully retained even after incubation at high temperatures. These results suggest that solubilization using SEP-Tags can be useful for producing large quantities of proteins containing multiple disulfide bonds.     

The CXXC motif: imperatives for the formation of native disulfide bonds in the cell.

The rapid formation of native disulfide bonds in cellular proteins is necessary for the efficient use of cellular resources. This process is catalyzed in vitro by protein disulfide isomerase (PDI), with the PDI1 gene being essential for the viability of Saccharomyces cerevisiae. PDI is a member of the thioredoxin (Trx) family of proteins, which have the active-site motif CXXC. PDI contains two Trx domains as well as two domains unrelated to the Trx family. We find that the gene encoding Escherichia coli Trx is unable to complement PDI1 null mutants of S.cerevisiae. Yet, Trx can replace PDI if it is mutated to have a CXXC motif with a disulfide bond of high reduction potential and a thiol group of low pKa. Thus, an enzymic thiolate is both necessary and sufficient for the formation of native disulfide bonds in the cell.