Optimization of the genotyping‐by‐sequencing strategy for population genomic analysis in conifers

Flexibility and low cost make genotyping‐by‐sequencing (GBS) an ideal tool for population genomic studies of nonmodel species. However, to utilize the potential of the method fully, many parameters affecting library quality and single nucleotide polymorphism (SNP) discovery require optimization, especially for conifer genomes with a high repetitive DNA content. In this study, we explored strategies for effective GBS analysis in pine species. We constructed GBS libraries using HpaII, PstI and EcoRI‐MseI digestions with different multiplexing levels and examined the effect of restriction enzymes on library complexity and the impact of sequencing depth and size selection of restriction fragments on sequence coverage bias. We tested and compared UNEAK, Stacks and GATK pipelines for the GBS data, and then developed a reference‐free SNP calling strategy for haploid pine genomes. Our GBS procedure proved to be effective in SNP discovery, producing 7000–11 000 and 14 751 SNPs within and among three pine species, respectively, from a PstI library. This investigation provides guidance for the design and analysis of GBS experiments, particularly for organisms for which genomic information is lacking.     

Chromosome‐level hybrid de novo genome assemblies as an attainable option for nonmodel insects

The emergence of third‐generation sequencing (3GS; long‐reads) is bringing closer the goal of chromosome‐size fragments in de novo genome assemblies. This allows the exploration of new and broader questions on genome evolution for a number of nonmodel organisms. However, long‐read technologies result in higher sequencing error rates and therefore impose an elevated cost of sufficient coverage to achieve high enough quality. In this context, hybrid assemblies, combining short‐reads and long‐reads, provide an alternative efficient and cost‐effective approach to generate de novo, chromosome‐level genome assemblies. The array of available software programs for hybrid genome assembly, sequence correction and manipulation are constantly being expanded and improved. This makes it difficult for nonexperts to find efficient, fast and tractable computational solutions for genome assembly, especially in the case of nonmodel organisms lacking a reference genome or one from a closely related species. In this study, we review and test the most recent pipelines for hybrid assemblies, comparing the model organism Drosophila melanogaster to a nonmodel cactophilic Drosophila, D. mojavensis. We show that it is possible to achieve excellent contiguity on this nonmodel organism using the dbg2olc pipeline.     

Minimum sample sizes for population genomics: an empirical study from an Amazonian plant species

High‐throughput DNA sequencing facilitates the analysis of large portions of the genome in nonmodel organisms, ensuring high accuracy of population genetic parameters. However, empirical studies evaluating the appropriate sample size for these kinds of studies are still scarce. In this study, we use double‐digest restriction‐associated DNA sequencing (ddRADseq) to recover thousands of single nucleotide polymorphisms (SNPs) for two physically isolated populations of Amphirrhox longifolia (Violaceae), a nonmodel plant species for which no reference genome is available. We used resampling techniques to construct simulated populations with a random subset of individuals and SNPs to determine how many individuals and biallelic markers should be sampled for accurate estimates of intra‐ and interpopulation genetic diversity. We identified 3646 and 4900 polymorphic SNPs for the two populations of A. longifolia, respectively. Our simulations show that, overall, a sample size greater than eight individuals has little impact on estimates of genetic diversity within A. longifolia populations, when 1000 SNPs or higher are used. Our results also show that even at a very small sample size (i.e. two individuals), accurate estimates of F_ST can be obtained with a large number of SNPs (≥1500). These results highlight the potential of high‐throughput genomic sequencing approaches to address questions related to evolutionary biology in nonmodel organisms. Furthermore, our findings also provide insights into the optimization of sampling strategies in the era of population genomics.     

Whole‐genome sequencing approaches for conservation biology: Advantages,limitations and practical recommendations

Whole‐genome resequencing (WGR) is a powerful method for addressing fundamental evolutionary biology questions that have not been fully resolved using traditional methods. WGR includes four approaches: the sequencing of individuals to a high depth of coverage with either unresolved or resolved haplotypes, the sequencing of population genomes to a high depth by mixing equimolar amounts of unlabelled‐individual DNA (Pool‐seq) and the sequencing of multiple individuals from a population to a low depth (lcWGR). These techniques require the availability of a reference genome. This, along with the still high cost of shotgun sequencing and the large demand for computing resources and storage, has limited their implementation in nonmodel species with scarce genomic resources and in fields such as conservation biology. Our goal here is to describe the various WGR methods, their pros and cons and potential applications in conservation biology. WGR offers an unprecedented marker density and surveys a wide diversity of genetic variations not limited to single nucleotide polymorphisms (e.g., structural variants and mutations in regulatory elements), increasing their power for the detection of signatures of selection and local adaptation as well as for the identification of the genetic basis of phenotypic traits and diseases. Currently, though, no single WGR approach fulfils all requirements of conservation genetics, and each method has its own limitations and sources of potential bias. We discuss proposed ways to minimize such biases. We envision a not distant future where the analysis of whole genomes becomes a routine task in many nonmodel species and fields including conservation biology.     

Evaluating the effect of reference genome divergence on the analysis of empirical RADseq datasets

The advent of high‐throughput sequencing (HTS) has made genomic‐level analyses feasible for nonmodel organisms. A critical step of many HTS pipelines involves aligning reads to a reference genome to identify variants. Despite recent initiatives, only a fraction of species has publically available reference genomes. Therefore, a common practice is to align reads to the genome of an organism related to the target species; however, this could affect read alignment and bias genotyping. In this study, I conducted an experiment using empirical RADseq datasets generated for two species of salmonids (Actinopterygii; Teleostei; Salmonidae) to address these questions. There are currently reference genomes for six salmonids of varying phylogenetic distance. I aligned the RADseq data to all six genomes and identified variants with several different genotypers, which were then fed into population genetic analyses. Increasing phylogenetic distance between target species and reference genome reduced the proportion of reads that successfully aligned and mapping quality. Reference genome also influenced the number of SNPs that were generated and depth at those SNPs, although the affect varied by genotyper. Inferences of population structure were mixed: increasing reference genome divergence reduced estimates of differentiation but similar patterns of population relationships were found across scenarios. These findings reveal how the choice of reference genome can influence the output of bioinformatic pipelines. It also emphasizes the need to identify best practices and guidelines for the burgeoning field of biodiversity genomics.     

Developing genomic resources in two Linum species via 454 pyrosequencing and genomic reduction

Recent advances in next-generation DNA sequencing (NGS) have enhanced the development of genomic resources such as contigs or single-nucleotide polymorphisms (SNPs) for evolutionary studies of a nonmodel species with a complex and unsequenced genome. This study presents an application of a NGS technique in combination with genomic reduction and advanced bioinformatics tools to identify contigs and SNPs from multiple samples of two Linum species. A full Roche 454 GS FLX run of 16 diverse Linum samples representing cultivated flax (Linum usitatissimum L.) and its wild progenitor (Linum bienne Mill.) generated approximately 1.6 million sequence reads with a total length of 498 Mbp. Application of the computational pipeline de novo identification of alleles identified 713 contigs and 1067 SNPs. A blast search revealed alignments of all 713 contigs with 491 existing Linum scaffolds and gene annotations associated with 512 contigs. Sanger sequencing confirmed 95% of 79 selected contigs and 94% of 272 SNPs and identified 211 new SNPs and 19 new indels. The scored 454 SNP data were highly imbalanced for assayed samples. These findings not only are useful for evolutionary studies of Linum species but also help to illustrate the utility of NGS technologies in SNP discovery for nonmodel organisms.     

Mass production of SNP markers in a nonmodel passerine bird through RAD sequencing and contig mapping to the zebra finch genome

Here, we present an adaptation of restriction‐site‐associated DNA sequencing (RAD‐seq) to the Illumina HiSeq2000 technology that we used to produce SNP markers in very large quantities at low cost per unit in the Réunion grey white‐eye (Zosterops borbonicus), a nonmodel passerine bird species with no reference genome. We sequenced a set of six pools of 18–25 individuals using a single sequencing lane. This allowed us to build around 600 000 contigs, among which at least 386 000 could be mapped to the zebra finch (Taeniopygia guttata) genome. This yielded more than 80 000 SNPs that could be mapped unambiguously and are evenly distributed across the genome. Thus, our approach provides a good illustration of the high potential of paired‐end RAD sequencing of pooled DNA samples combined with comparative assembly to the zebra finch genome to build large contigs and characterize vast numbers of informative SNPs in nonmodel passerine bird species in a very efficient and cost‐effective way.     

Single‐nucleotide polymorphism discovery in Leptographium longiclavatum,a mountain pine beetle‐associated symbiotic fungus,using whole‐genome resequencing

Single‐nucleotide polymorphisms (SNPs) are rapidly becoming the standard markers in population genomics studies; however, their use in nonmodel organisms is limited due to the lack of cost‐effective approaches to uncover genome‐wide variation, and the large number of individuals needed in the screening process to reduce ascertainment bias. To discover SNPs for population genomics studies in the fungal symbionts of the mountain pine beetle (MPB), we developed a road map to discover SNPs and to produce a genotyping platform. We undertook a whole‐genome sequencing approach of Leptographium longiclavatum in combination with available genomics resources of another MPB symbiont, Grosmannia clavigera. We sequenced 71 individuals pooled into four groups using the Illumina sequencing technology. We generated between 27 and 30 million reads of 75 bp that resulted in a total of 1, 181 contigs longer than 2 kb and an assembled genome size of 28.9 Mb (N₅₀ = 48 kb, average depth = 125x). A total of 9052 proteins were annotated, and between 9531 and 17 266 SNPs were identified in the four pools. A subset of 206 genes (containing 574 SNPs, 11% false positives) was used to develop a genotyping platform for this species. Using this roadmap, we developed a genotyping assay with a total of 147 SNPs located in 121 genes using the Illumina^® Sequenom iPLEX Gold. Our preliminary genotyping (success rate = 85%) of 304 individuals from 36 populations supports the utility of this approach for population genomics studies in other MPB fungal symbionts and other fungal nonmodel species.     

Double‐digest RAD sequencing using Ion Proton semiconductor platform (ddRADseq‐ion) with nonmodel organisms

Research in evolutionary biology involving nonmodel organisms is rapidly shifting from using traditional molecular markers such as mtDNA and microsatellites to higher throughput SNP genotyping methodologies to address questions in population genetics, phylogenetics and genetic mapping. Restriction site associated DNA sequencing (RAD sequencing or RADseq) has become an established method for SNP genotyping on Illumina sequencing platforms. Here, we developed a protocol and adapters for double‐digest RAD sequencing for Ion Torrent (Life Technologies; Ion Proton, Ion PGM) semiconductor sequencing. We sequenced thirteen genomic libraries of three different nonmodel vertebrate species on Ion Proton with PI chips: Arctic charr Salvelinus alpinus, European whitefish Coregonus lavaretus and common lizard Zootoca vivipara. This resulted in ~962 million single‐end reads overall and a mean of ~74 million reads per library. We filtered the genomic data using Stacks, a bioinformatic tool to process RAD sequencing data. On average, we obtained ~11 000 polymorphic loci per library of 6–30 individuals. We validate our new method by technical and biological replication, by reconstructing phylogenetic relationships, and using a hybrid genetic cross to track genomic variants. Finally, we discuss the differences between using the different sequencing platforms in the context of RAD sequencing, assessing possible advantages and disadvantages. We show that our protocol can be used for Ion semiconductor sequencing platforms for the rapid and cost‐effective generation of variable and reproducible genetic markers.     

Less is more: extreme genome complexity reduction with ddRAD using Ion Torrent semiconductor technology

Massively parallel sequencing a small proportion of the whole genome at high coverage enables answering a wide range of questions from molecular evolution and evolutionary biology to animal and plant breeding and forensics. In this study, we describe the development of restriction‐site associated DNA (RAD) sequencing approach for Ion Torrent PGM platform. Our protocol results in extreme genome complexity reduction using two rare‐cutting restriction enzymes and strict size selection of the library allowing sequencing of a relatively small number of genomic fragments with high sequencing depth. We applied this approach to a common freshwater fish species, the Eurasian perch (Perca fluviatilis L.), and generated over 2.2 MB of novel sequence data consisting of ~17 000 contigs, identified 1259 single nucleotide polymorphisms (SNPs). We also estimated genetic differentiation between the DNA pools from freshwater (Lake Peipus) and brackish water (the Baltic Sea) populations and identified SNPs with the strongest signal of differentiation that could be used for robust individual assignment in the future. This work represents an important step towards developing genomic resources and genetic tools for the Eurasian perch. We expect that our ddRAD sequencing protocol for semiconductor sequencing technology will be useful alternative for currently available RAD protocols.     

Targeted multiplex next‐generation sequencing: advances in techniques of mitochondrial and nuclear DNA sequencing for population genomics

Next‐generation sequencing (NGS) is emerging as an efficient and cost‐effective tool in population genomic analyses of nonmodel organisms, allowing simultaneous resequencing of many regions of multi‐genomic DNA from multiplexed samples. Here, we detail our synthesis of protocols for targeted resequencing of mitochondrial and nuclear loci by generating indexed genomic libraries for multiplexing up to 100 individuals in a single sequencing pool, and then enriching the pooled library using custom DNA capture arrays. Our use of DNA sequence from one species to capture and enrich the sequencing libraries of another species (i.e. cross‐species DNA capture) indicates that efficient enrichment occurs when sequences are up to about 12% divergent, allowing us to take advantage of genomic information in one species to sequence orthologous regions in related species. In addition to a complete mitochondrial genome on each array, we have included between 43 and 118 nuclear loci for low‐coverage sequencing of between 18 kb and 87 kb of DNA sequence per individual for single nucleotide polymorphisms discovery from 50 to 100 individuals in a single sequencing lane. Using this method, we have generated a total of over 500 whole mitochondrial genomes from seven cetacean species and green sea turtles. The greater variation detected in mitogenomes relative to short mtDNA sequences is helping to resolve genetic structure ranging from geographic to species‐level differences. These NGS and analysis techniques have allowed for simultaneous population genomic studies of mtDNA and nDNA with greater genomic coverage and phylogeographic resolution than has previously been possible in marine mammals and turtles.     

SNP discovery in nonmodel organisms: strand bias and base‐substitution errors reduce conversion rates

Single nucleotide polymorphisms (SNPs) have become the marker of choice for genetic studies in organisms of conservation, commercial or biological interest. Most SNP discovery projects in nonmodel organisms apply a strategy for identifying putative SNPs based on filtering rules that account for random sequencing errors. Here, we analyse data used to develop 4723 novel SNPs for the commercially important deep‐sea fish, orange roughy (Hoplostethus atlanticus), to assess the impact of not accounting for systematic sequencing errors when filtering identified polymorphisms when discovering SNPs. We used SAMtools to identify polymorphisms in a velvet assembly of genomic DNA sequence data from seven individuals. The resulting set of polymorphisms were filtered to minimize ‘bycatch’—polymorphisms caused by sequencing or assembly error. An Illumina Infinium SNP chip was used to genotype a final set of 7714 polymorphisms across 1734 individuals. Five predictors were examined for their effect on the probability of obtaining an assayable SNP: depth of coverage, number of reads that support a variant, polymorphism type (e.g. A/C), strand‐bias and Illumina SNP probe design score. Our results indicate that filtering out systematic sequencing errors could substantially improve the efficiency of SNP discovery. We show that BLASTX can be used as an efficient tool to identify single‐copy genomic regions in the absence of a reference genome. The results have implications for research aiming to identify assayable SNPs and build SNP genotyping assays for nonmodel organisms.     

Accelerating plant DNA barcode reference library construction using herbarium specimens: improved experimental techniques

A well‐covered reference library is crucial for successful identification of species by DNA barcoding. The biggest difficulty in building such a reference library is the lack of materials of organisms. Herbarium collections are potentially an enormous resource of materials. In this study, we demonstrate that it is likely to build such reference libraries using the reconstructed (self‐primed PCR amplified) DNA from the herbarium specimens. We used 179 rosaceous specimens to test the effects of DNA reconstruction, 420 randomly sampled specimens to estimate the usable percentage and another 223 specimens of true cherries (Cerasus, Rosaceae) to test the coverage of usable specimens to the species. The barcode rbcLb (the central four‐sevenths of rbcL gene) and matK was each amplified in two halves and sequenced on Roche GS 454 FLX+. DNA from the herbarium specimens was typically shorter than 300 bp. DNA reconstruction enabled amplification fragments of 400–500 bp without bringing or inducing any sequence errors. About one‐third of specimens in the national herbarium of China (PE) were proven usable after DNA reconstruction. The specimens in PE cover all Chinese true cherry species and 91.5% of vascular species listed in Flora of China. It is very possible to build well‐covered reference libraries for DNA barcoding of vascular species in China. As exemplified in this study, DNA reconstruction and DNA‐labelled next‐generation sequencing can accelerate the construction of local reference libraries. By putting the local reference libraries together, a global library for DNA barcoding becomes closer to reality.     

Finding needles in a genomic haystack: targeted capture identifies clear signatures of selection in a nonmodel plant species

Teasing apart neutral and adaptive genomic processes and identifying loci that are targets of selection can be difficult, particularly for nonmodel species that lack a reference genome. However, identifying such loci and the factors driving selection have the potential to greatly assist conservation and restoration practices, especially for the management of species in the face of contemporary and future climate change. Here, we focus on assessing adaptive genomic variation within a nonmodel plant species, the narrow‐leaf hopbush (Dodonaea viscosa ssp. angustissima), commonly used for restoration in Australia. We used a hybrid‐capture target enrichment approach to selectively sequence 970 genes across 17 populations along a latitudinal gradient from 30°S to 36°S. We analysed 8462 single‐nucleotide polymorphisms (SNPs) for F_ST outliers as well as associations with environmental variables. Using three different methods, we found 55 SNPs with significant correlations to temperature and water availability, and 38 SNPs to elevation. Genes containing SNPs identified as under environmental selection were diverse, including aquaporin and abscisic acid genes, as well as genes with ontologies relating to responses to environmental stressors such as water deprivation and salt stress. Redundancy analysis demonstrated that only a small proportion of the total genetic variance was explained by environmental variables. We demonstrate that selection has led to clines in allele frequencies in a number of functional genes, including those linked to leaf shape and stomatal variation, which have been previously observed to vary along the sampled environmental cline. Using our approach, gene regions subject to environmental selection can be readily identified for nonmodel organisms.     

Hybridization ddRAD‐sequencing for population genomics of nonmodel plants using highly degraded historical specimen DNA

Species’ responses at the genetic level are key to understanding the long‐term consequences of anthropogenic global change. Herbaria document such responses, and, with contemporary sampling, provide high‐resolution time‐series of plant evolutionary change. Characterizing genetic diversity is straightforward for model species with small genomes and a reference sequence. For nonmodel species—with small or large genomes—diversity is traditionally assessed using restriction‐enzyme‐based sequencing. However, age‐related DNA damage and fragmentation preclude the use of this approach for ancient herbarium DNA. Here, we combine reduced‐representation sequencing and hybridization‐capture to overcome this challenge and efficiently compare contemporary and historical specimens. Specifically, we describe how homemade DNA baits can be produced from reduced‐representation libraries of fresh samples, and used to efficiently enrich historical libraries for the same fraction of the genome to produce compatible sets of sequence data from both types of material. Applying this approach to both Arabidopsis thaliana and the nonmodel plant Cardamine bulbifera, we discovered polymorphisms de novo in an unbiased, reference‐free manner. We show that the recovered genetic variation recapitulates known genetic diversity in A. thaliana, and recovers geographical origin in both species and over time, independent of bait diversity. Hence, our method enables fast, cost‐efficient, large‐scale integration of contemporary and historical specimens for assessment of genome‐wide genetic trends over time, independent of genome size and presence of a reference genome.     

High-throughput microsatellite marker development in two sparid species and verification of their transferability in the family Sparidae

Recently, 454 sequencing has emerged as a popular method for isolating microsatellites owing to cost-effectiveness and time saving. In this study, repeat-enriched libraries from two southern African endemic sparids (Pachymetopon blochii and Lithognathus lithognathus) were 454 GS-FLX sequenced. From these, 7370 sequences containing repeats (SCRs) were identified. A brief survey of 23 studies showed a significant difference between the number of SCRs when enrichment was performed first before 454 sequencing. We designed primers for 302 unique fragments containing more than five repeat units and suitable flanking regions. A fraction (<11%) of these loci were characterized with 18 polymorphic microsatellite loci (nine in each of the focal species) being described. Sanger sequencing of alleles confirmed that size variation was because of differences in the number of tandem repeats. However, a case of homoplasy and sequencing errors in the 454 sequencing were identified. These newly developed and four previously isolated loci were successfully used to identify polymorphic markers in nine other economically important species, representative of sparid diversity. The combination of newly developed markers with data from previous sparid cross-species studies showed a significant negative correlation between genetic divergence to focal species and microsatellite transferability. The high level of transferability we described (48% amplification success and 32% polymorphism) suggests that the 302 microsatellite loci identified represent an excellent resource for future studies on sparids. Microsatellite marker development should commonly include tests of transferability to reduce costs and increase feasibility of population genetics studies in nonmodel organisms.