Individual tooth macrowear pattern guides the reconstruction of Sts 52 (Australopithecus africanus) dental arches

The functional restoration of the occlusal relationship between maxillary and mandibular tooth rows is a major challenge in modern dentistry and maxillofacial surgery. Similar technical challenges are present in paleoanthropology when considering fragmented and deformed mandibular and maxillary fossils. Sts 52, an Australopithecus africanus specimen from Sterkfontein Member 4, represents a typical case where the original shape of the dental arches is no longer preserved. It includes a partial lower face (Sts 52a) and a fragmented mandible (Sts 52b), both incomplete and damaged to such an extent to thwart attempts at matching upper and lower dentitions. We show how the preserved macrowear pattern of the tooth crowns can be used to functionally reconstruct Sts 52's dental arches. High‐resolutiondental stone casts of Sts 52 maxillary and mandibular dentition were mounted and repositioned in a dental articulator. The occlusal relationship between antagonists was restored based on the analysis of the occlusal wear pattern of each preserved tooth, considering all dental contact movements represented in the occlusal compass. The reconstructed dental arches were three‐dimensional surface scanned and their occlusal kinematics tested in a simulation. The outcome of this contribution is the first functional restoration of A. africanus dental arches providing new morphometric data for specimen Sts 52. It is noteworthy that the method described in this case study might be applied to several other fossilspecimens. Am J Phys Anthropol, 2013. © 2013 Wiley Periodicals, Inc.     

Technical note: Enhancement of Scott's molar wear scoring method

A method is described for orienting maxillary and mandibular molars in order to standardize the reporting of wear scores on quadrants of the occlusal surfaces (Scott: Am J Phys Anthropol 51 (1979) 213–217). The method, which was developed on an archeological sample from ancient Mendes, Egypt, further requires that quadrant scores be reported individually and sequentially for each tooth, rather than summed, in order to identify more easily differential and directional wear patterns. Intraobserver and interobserver error was found to be negligible when the appropriate diagrams and instructions were consulted. Thus, observer error does not add further to the potential for error associated with Scott's original scoring method. Am J Phys Anthropol, 2010. © 2010 Wiley‐Liss, Inc.     

Changes in the pattern of tooth wear from prehistoric to recent periods in Japan

Although a number of studies have been performed on interpopulational variation of tooth wear patterns in recent humans, the major interest in the study of tooth wear so far has been in reconstructing the subsistence and behavior of prehistoric populations, and hence research on wear pattern changes in historic times has been superficial. The present study investigated temporal change in the pattern of wear on the permanent dentition of the Japanese through comparison of the following five groups: prehistoric hunter-gatherers, prehistoric agriculturists, medieval, premodern, and recent populations. The pattern of reduction of occlusal wear severity across thesechronological groups was not similar between the anterior and posterior portions of the dentition. Occlusal wear on the anterior teeth was noticeably lighter in the prehistoric agriculturists and later populations than in the prehistoric hunter-gatherers, while clear reduction of occlusal wear on the posterior teeth occurred after medieval times. The temporal variations in the degree of mesiodistal crown diameter loss due to wear and its anterior-posterior gradient within the dentition are generally consistent with those observed in the occlusal wear pattern. Possible causative factors of these temporal changes in the wear pattern are discussed. Am J Phys Anthropol 109:501–508, 1999. © 1999 Wiley-Liss, Inc.     

Technical note: Artificial Resynthesis Technology for the experimental formation of dental microwear textures

Dental microwear formation on the posterior dentition is largely attributed to an organism's diet. However, some have suggested that dietary and environmental abrasives contribute more to the formation process than food, calling into question the applicability of dental microwear to the reconstruction of diet in the fossil record. Creating microwear under controlled conditions would benefit this debate, but requires accurately replicating the oral environment. This study tests the applicability of Artificial Resynthesis Technology (ART 5) to create microwear textures while mitigating the challenges of past research. ART 5 is a simulator that replicates the chewing cycle, responds to changes in food texture, and simulates the actions of the oral cavity. Surgically extracted, occluding pairs of third molars (n = 2 pairs) were used in two chewing experiments: one with dried beef and another with sand added to the dried beef. High-resolution molds were taken at 0, 50, 100, 2500, and 5000 simulated chewing cycles, which equates to approximately 1 week of chewing. Preliminary results show that ART 5 produces microwear textures. Meat alone may produce enamel prism rod exposure at 5000 cycles, although attrition cannot be ruled out. Meat with sand accelerates the wear formation process, with enamel prism rods quickly obliterated and “pit-and-scratch” microwear forming at approximately 2500 cycles. Future work with ART 5 will incorporate a more thorough experimental protocol with improved controls, pH of the simulated oral environment, and grit measurements; however, these results indicate the potential of ART 5 in untangling the complex variables of dental microwear formation.     

The teaching of prosthodontic care for older people: a non-rote philosophy

This essay complements that de Baat et al¹ in the last issue with emphasis on the importance of the variability between individual older people. The consequent need for an open minded approach towards planning Prosthodontics is discussed, based on each patient's motivation for aesthetics, function, comfort and self esteem. Both functional expectations and motivation to learn effective health behaviour vary widely, and evaluation of both is essential for realistic planning because further tooth loss and the need for partial dentures occur so frequently. The consequent variation in plans raises the question – which are the strategic teeth to maintain a stable dental occlusion or a future tooth stabilised denture? For undergraduates this demands a non-rote approach to learning.     

Variation in dental wear and tooth loss among known‐aged,older ring‐tailed lemurs (Lemur catta): a comparison between wild and captive individuals

Tooth wear is generally an age‐related phenomenon, often assumed to occur at similar rates within populations of primates and other mammals, and has been suggested as a correlate of reduced offspring survival among wild lemurs. Few long‐term wild studies have combined detailed study of primate behavior and ecology with dental analyses. Here, we present data on dental wear and tooth loss in older (>10 years old) wild and captive ring‐tailed lemurs (Lemur catta). Among older ring‐tailed lemurs at the Beza Mahafaly Special Reserve (BMSR), Madagascar (n=6), the percentage of severe dental wear and tooth loss ranges from 6 to 50%. Among these six individuals, the oldest (19 years old) exhibits the second lowest frequency of tooth loss (14%). The majority of captive lemurs at the Indianapolis Zoo (n=7) are older than the oldest BMSR lemur, yet display significantly less overall tooth wear for 19 of 36 tooth positions, with only two individuals exhibiting antemortem tooth loss. Among the captive lemurs, only one lemur (a nearly 29 year old male) has lost more than one tooth. This individual is only missing anterior teeth, in contrast to lemurs at BMSR, where the majority of lost teeth are postcanine teeth associated with processing specific fallback foods. Postcanine teeth also show significantly more overall wear at BMSR than in the captive sample. At BMSR, degree of severe wear and tooth loss varies in same aged, older individuals, likely reflecting differences in microhabitat, and thus the availability and use of different foods. This pattern becomes apparent before “old age,” as seen in individuals as young as 7 years. Among the four “older” female lemurs at BMSR, severe wear and/or tooth loss do not predict offspring survival. Am. J. Primatol. 72:1026–1037, 2010. © 2010 Wiley‐Liss, Inc.     

Brief communication: Study of noncarious cervical tooth lesions in samples of prehistoric,historic, and modern populations from the South of France

Noncarious tooth lesions (NCTL) are frequent findings in contemporary dental practices. Unlike other dental and periodontal diseases, NCTL have not been studied in an anthropological context. The purpose of the present study was to compare the prevalence of NCTL in three archaeological samples from the Copper Age and Middle Ages and in subjects examined in three dental practices. Both archaeological samples and dental-practice subjects were from southern France. In the archaeological sample group, no NCTL were detected in 3,927 teeth from 259 individuals. In the dental-practice group, prevalence rates were in agreement with current epidemiological data. Our data also suggest that prevalence of NCTL increases with age and is higher in females. Premolars were the most affected tooth type. Occurrence of NCTL has long been attributed to toothbrushing and to erosion by intrinsic and extrinsic acids. More recently, occlusal stress associated with tooth flexure has been implicated. The reasons underlying the total absence of NCTL in archaeological samples are discussed. The most likely explanations involve differences in lifestyle, diet, and dental condition.     

Dental wear,wear rate,and dental disease in the African apes

The African apes possess thinner enamel than do other hominoids, and a certain amount of dentin exposure may be advantageous in the processing of tough diets eaten by Gorilla. Dental wear (attrition plus abrasion) that erodes the enamel exposes the underlying dentin and creates additional cutting edges at the dentin‐enamel junction. Hypothetically, efficiency of food processing increases with junction formation until an optimal amount is reached, but excessive wear hinders efficient food processing and may lead to sickness, reduced fecundity, and death. Occlusal surfaces of molars and incisors in three populations each of Gorilla and Pan were videotaped and digitized. The quantity of incisal and molar occlusal dental wear and the lengths of dentin–enamel junctions were measured in 220 adult and 31 juvenile gorilla and chimpanzee skulls. Rates of dental wear were calculated in juveniles by scoring the degree of wear between adjacent molars M1 and M2. Differences were compared by principal (major) axis analysis. ANOVAs compared means of wear amounts. Pearson correlation coefficients were calculated to compare the relationship between molar wear and incidence of dental disease. Results indicate that quantities of wear are significantly greater in permanent incisors and molars and juvenile molars of gorillas compared to chimpanzees. The lengths of dentin–enamel junctions were predominantly suboptimal. Western lowland gorillas have the highest quantities of wear and the most molars with suboptimal wear. The highest rates of wear are seen in Pan paniscus and Pan t. troglodytes, and the lowest rates are found in P.t. schweinfurthii and G. g. graueri. Among gorillas, G. b. beringei have the highest rates but low amounts of wear. Coefficients between wear and dental disease were low, but significant when all teeth were combined. Gorilla teeth are durable, and wear does not lead to mechanical senescence in this sample. Am. J. Primatol. 72:481–491, 2010. © 2010 Wiley‐Liss, Inc.     

Characteristic high- and low-frequency dental traits in sub-Saharan African populations

In an earlier investigation (Irish [1993] Biological Affinities of Late Pleistocene Through Modern African Aboriginal Populations: The Dental Evidence [Ann Arbor: University Microfilms]), biological affinities of 32 sub-Saharan and North African dental samples were estimated using comparative analyses of 36 dental morphological traits. Marked dental homogeneity was revealed among samples within each of the two geographic regions, but significant interregional differences were noted. Assuming dental phenetic expression approximates or is an estimate of genetic variation, the present study of 976 sub-Saharan-affiliated Africans indicates they are not closely related to other world groups; they are characterized by numerous morphologically complex crown and root traits. Turner ([1984] Acta Anthropogenetica 8:23–78; [1985] in R Kirk and E Szathmary (eds.): Out of Asia: Peopling the Americas and the Pacific [Canberra: The Journal of Pacific History], pp. 31–78; [1990] Am. J. Phys. Anthropol. 82:295–318; [1992] Persp. Hum. Biol. 2/Archaeol. Oceania 27:120–127; [1992] in T Akaszawa, K Aoki, and T Kimura (eds.): The Evolution and Dispersal of Modern Humans in Asia [Tokyo: Hokusen-Sha Publishing Co.], pp. 415–438) reports that Northeast Asian/New World sinodonts also have complex teeth relative to Europeans, Southeast Asian sundadonts, Australian/Tasmanians, and Melanesians. However, sinodonty is characterized by UI1 winging, UI1 shoveling, UI1 double shoveling, one-rooted UP1, UM1 enamel extension, M3 agenesis, and three-rooted LM1. Sub-Saharan peoples exhibit very low frequencies of these features. It is proposed that the collection of dental traits which best differentiate sub-Saharan Africans from other worldwide samples includes high frequencies of the Bushman Canine, two-rooted UP1, UM1 Carabelli's trait, three-rooted UM2, LM2 Y-groove pattern, LM1 cusp 7, LP1 Tome's root, two-rooted LM2, UM3 presence, and very low incidences of UI1 double shoveling and UM1 enamel extension. This suite of diagnostic traits is termed the sub-Saharan African dental complex. Am J Phys Anthropol 102:455–467, 1997. © 1997 Wiley-Liss, Inc.     

Age and perception of dental appearance and tooth colour

Objectives: To determine the prevalence of satisfaction with dental appearance and own tooth colour in the UK and investigate the impact of ageing on these perceptions. Methods: Data about ageing and satisfaction with dental appearance and tooth colour was gathered by means of a questionnaire completed at face‐to‐face interview. The questionnaire was first tested and then used by the Office of National Statistics (ONS) in a stratified random sample of adults drawn from the UK. A total of 3384 adults were interviewed. Results: Three quarters of the population were satisfied with their own dental appearance and two‐thirds were satisfied with their tooth colour. Subjects over the age of 55 were significantly more likely to be satisfied with their dental appearance and tooth colour (p < 0.05) compared with younger age groups. Conclusions: Ageing is not necessarily associated with negative self‐perception of dental appearance or tooth colour. Greater dissatisfaction with dental appearance or colour in younger ages may suggest that perceived appearance is linked to cognitive factors other than social or cultural ones.     

Tooth wear and dental pathology at the advent of agriculture: new evidence from the Levant

Differences in patterns of diet and subsistence through the analysis of dental pathology and tooth wear were studied in skeletal populations of Natufian hunter-gatherers (10,500-8300 BC) and Neolithic populations (8300-5500 BC, noncalibrated) from the southern Levant. 1,160 Natufians and 804 Neolithic teeth were examined for rate of attrition, caries, antemortem tooth loss, calculus, periapical lesions, and periodontal processes. While the Natufian people manifest a higher rate of dental attrition and periodontal disease (36.4% vs. 19%), Neolithic people show a higher rate of calculus. Both populations manifested low and similar rates of caries (6.4% in the Natufian vs. 6.7% in the Neolithic), periapical lesions (not over 1.5%), and antemortem tooth loss (3.7% vs. 4.5%, respectively). Molar wear pattern in the Neolithic is different than in the Natufian. The current study shows that the dental picture obtained from the two populations is multifactorial in nature, and not exclusively of dietary origin, i.e., the higher rate and unique pattern of attrition seen in the Natufian could result from a greater consumption of fibrous plants, the use of pestles and mortars (which introduce large quantities of stone-dust to the food), and/or the use of teeth as a "third hand." The two major conclusions of this study are: 1) The transition from hunting and gathering to a food-producing economy in the Levant did not promote changes in dental health, as previously believed. This generally indicates that the Natufians and Neolithic people of the Levant may have differed in their ecosystem management (i.e., gathering vs. growing grains), but not in the type of food consumed. 2) Changes in food-preparation techniques and nondietary usage of the teeth explain much of the variation in tooth condition in populations before and after the agricultural revolution.     

Problems of sampling and inference in the study of fluctuating dental asymmetry

Randomly distributed or “fluctuating” dental asymmetry has been accorded evolutionary meaning and interpreted as a result of environmental stress. However, except for congenital malformation syndromes, the determinants of human crown size asymmetry are still equivocal. Both a computer simulated sampling experiment using a combined sample size of N = 3000, and the requirements of adequate statistical power show that sample sizes of several hundred are needed to detect population differences in dental asymmetry. Using the largest available sample of children with defined prenatal stresses, we are unable to find systematic increases in crown size asymmetry. Given sampling limitations and the current inability to link increased human dental asymmetry to defined prenatal stresses, we suggest that fluctuating dental asymmetry is not yet established as a useful and reliable measure of general stress in human populations.     

The impact of fallback foods on wild ring-tailed lemur biology: A comparison of intact and anthropogenically disturbed habitats

Fallback foods are often viewed as central in shaping primate morphology, and influencing adaptive shifts in hominin and other primate evolution. Here we argue that fruit of the tamarind tree (Tamarindus indica) qualifies as a fallback food of ring-tailed lemurs (Lemur catta) at the Beza Mahafaly Special Reserve (BMSR), Madagascar. Contrary to predictions that fallback foods may select for dental and masticatory morphologies adapted to processing these foods, consumption of tamarind fruit by these lemurs leaves a distinct pattern of dental pathology among ring-tailed lemurs at BMSR. Specifically, the physical and mechanical properties of tamarind fruit likely result in a high frequency of severe tooth wear, and subsequent antemortem tooth loss, in this lemur population. This pattern of dental pathology is amplified among lemurs living in disturbed areas at Beza Mahafaly, resulting from a disproportionate emphasis on challenging tamarind fruit, due to few other fruits being available. This is in part caused by a reduction in ground cover and other plants due to livestock grazing. As such, tamarind trees remain one of the few food resources in many areas. Dental pathologies are also associated with the use of a nonendemic leaf resource Argemone mexicana, an important food during the latter part of the dry season when overall food availability is reduced. Such dental pathologies at Beza Mahafaly, resulting from the use or overemphasis of fallback foods for which they are not biologically adapted, indicate that anthropogenic factors must be considered when examining fallback foods. Am J Phys Anthropol 140:671–686, 2009. © 2009 Wiley-Liss, Inc.     

Observer error,dental wear,and the inference of new world sundadonty

Dental morphology provides important information on human evolution and interpopulation relationships. Dental wear is one of the major limitations of morphological data analysis. Wear figures heavily in existing debates about patterns of New World dental variation with some scholars finding evidence for a more generalized dentition in early New World populations (Powell: Doctoral Dissertation, Texas A&M University, TX (1995)) and others questioning these findings based on the probable effects of dental wear on trait scores (Turner, The First Americans: the Pleistocene Colonization of the New World. San Francisco: California Academy of Sciences (2002) 123–158; Turner: Am J Phys Anthropol 130 (2006) 455–461; Turner and Scott, Handbook of paleoanthropology, Vol. III: Phylogeny of Hominids. New York: Springer (2007) 1901–1941). Here we evaluate these competing claims using data from the Early Archaic Windover sample. Results confirm the dental distinctiveness of Windover with respect to other Old World Asian (i.e., sinodont/sundadont) populations. However, comparison of our results to those of Powell (1995) also highlights significant interobserver error. Statistical analysis of matched wear and morphology scores suggests trait downgrading for some traits. Patterns of missing data present a more challenging (and potentially serious) problem. Use of Little's MCAR test for missing data mechanisms indicates a complex process of data collection in which incidental and opportunistic recording of both highly worn and unerupted teeth introduce a “missing not at random” mechanism into our dataset that biases dental trait frequencies. We conclude that patterns of missingness and formal research designs for “planned missingness” are needed to help mitigate this bias. Am J Phys Anthropol 156:349–362, 2015. © 2014 Wiley Periodicals, Inc.