Effects of changing the interaction between subdomains on the thermostability of Bacillus neutral proteases.

Variants of the thermolabile neutral protease (Npr) of B. subtilis (Npr-sub) and the thermostable neutral protease of B. stearothermophilus (Npr-ste) were produced by means of site-directed mutagenesis and the effects of the mutations on thermostability were determined. Mutations were designed to alter the interaction between the middle and C-terminal subdomain of these enzymes. In all Nprs a cluster of hydrophobic contacts centered around residue 315 contributes to this interaction. In thermostable Nprs (like Npr-ste) a 10 residue beta-hairpin, covering the domain interface, makes an additional contribution. The hydrophobic residue at position 315 was replaced by smaller amino acids. In addition, the beta-hairpin was deleted from Npr-ste and inserted into Npr-sub. The changes in thermostability observed after these mutations confirmed the importance of the hydrophobic cluster and of the beta-hairpin for the structural integrity of Nprs. Combined mutants showed that the effects of individual mutations affecting the interaction between the subdomains were not additive. The effects on thermostability decreased as the strength of the subdomain interaction increased. The results show that once the subdomain interface is sufficiently stabilized, additional stabilizing mutations at the same interface do not further increase thermostability. The results are interpreted on the basis of a model for the thermal inactivation of neutral proteases, in which it is assumed that inactivation results from the occurrence of local unfolding processes that render these enzymes susceptible to autolysis.     

Increasing the thermal stability of cellulase C using rules learned from thermophilic proteins: a pilot study

Some structural features underlying the increased thermostability of enzymes from thermophilic organisms relative to their homologues from mesophiles are known from earlier studies. We used cellulase C from Clostridium thermocellum to test whether thermostability can be increased by mutations designed using rules learned from thermophilic proteins. Cellulase C has a TIM barrel fold with an additional helical subdomain. We designed and produced a number of mutants with the aim to increase its thermostability. Five mutants were designed to create new electrostatic interactions. They all retained catalytic activity but exhibited decreased thermostability relative to the wild-type enzyme. Here, the stabilizing contributions are obviously smaller than the destabilization caused by the introduction of the new side chains. In another mutant, the small helical subdomain was deleted. This mutant lost activity but its melting point was only 3 degrees C lower than that of the wild-type enzyme, which suggests that the subdomain is an independent folding unit and is important for catalytic function. A double mutant was designed to introduce a new disulfide bridge into the enzyme. This mutant is active and has an increased stability (deltaT(m)=3 degrees C, delta(deltaG(u))=1.73 kcal/mol) relative to the wild-type enzyme. Reduction of the disulfide bridge results in destabilization and an altered thermal denaturation behavior. We conclude that rules learned from thermophilic proteins cannot be used in a straightforward way to increase the thermostability of a protein. Creating a crosslink such as a disulfide bond is a relatively sure-fire method but the stabilization may be smaller than calculated due to coupled destabilizing effects.     

Enhancing thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2 by DNA shuffling

DNA shuffling was used to improve the thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2. Two highly thermostable mutants, III-1 and III-2, were generated after three rounds of shuffling and recombination of mutations. Their optimal reaction temperatures were all 80 degrees C, which was 10 degrees C higher than that of the wild-type. The mutant enzyme III-1 carried seven mutations: N147D, F195L, N263S, D311G, A344V, F397S, and N508D. The half-life of III-1 was about 20 times greater than that of the wild-type at 78 degrees C. The mutant enzyme III-2 carried M375T in addition to the mutations in III-1, which was responsible for the decrease in specific activity. The half-life of III-2 was 568 min while that of the wild-type was < 1 min at 80 degrees C. The melting temperatures of III-1 and III-2, as determined by differential scanning calorimetry, increased by 6.1 degrees C and 11.4 degrees C, respectively. Hydrogen bonding, hydrophobic interaction, electrostatic interaction, proper packing, and deamidation were predicted as the mechanisms for the enhancement of thermostability in the enzymes with the mutations.     

Highly thermostable neutral protease from Bacillus stearothermophilus

Bacillus stearothermophilus MK232, which produced a highly thermostable neutral protease, was isolated from a natural environment. By several steps of mutagenesis, a hyper-producing mutant strain, YG185, was obtained. The enzyme productivity was twice as much as that of the original strain. This extracellular neutral protease was purified and crystallized. The molecular weight of the enzyme was 34,000 by SDS-polyacrylamide gel electrophoresis and gel filtration. The optimum pH and temperature for the enzyme activity were 7.5 and 70°C, respectively, and the enzyme was stable at pH 5–10 and below 70°C. The thermostability and specific activity of the new protease are around 10% and 40% higher than those of thermolysin (the neutral protease from Bacillus thermoproteolyticus), respectively. The enzyme was inactivated by EDTA, but not by phenylmethylsulfonyl fluoride. These results indicate that the enzyme is a highly thermostable neutral-(metallo)protease.     

Stabilization of the neutral protease of Bacillus stearothermophilus by removal of a buried water molecule.

Using site-directed mutagenesis, Ala166 in the neutral protease of Bacillus stearothermophilus was changed into Ser. Model building and molecular dynamics simulations of the mutant enzyme indicated that the Ser hydroxyl group fits well in a cavity which contains a water molecule in the wild-type enzyme. The Ala166----Ser mutation was expected to exert a stabilizing effect because of the gain in entropy resulting from the release of water molecule from the folded protein to the solvent. In addition, the hydrogen-bonding network around residue 166 was improved upon the mutation. As a result of this mutation the thermostability of the neutral protease was increased by 1.2 +/- 0.1 degrees C.     

Introduction of glycine and proline residues onto protein surface increases the thermostability of endoglucanase CelA from Clostridium thermocellum

A saturation mutagenesis library was constructed at the position 329 of the endoglucanase CelA from Clostridium thermocellum based on previous results (Yi and Wu, 2010), and one mutation, S329G, was identified to contribute to the enhanced thermostability. The result inspired a rational design approach focusing on the introduction of Gly or Pro residue onto the protein surface, which led to the identification of two additional beneficial mutations, H194G and S269P. Combination of these three mutations resulted in a mutant with a 10-fold increase in half-life of inactivation (60 min) at 86°C without compromising activity compared with the wild-type. Its reaction temperature for maximum activity increased from 75 to 85°C. The results provide valuable thermostability-related structural information on this thermophilic enzyme.     

Rational Design of Disulfide Bonds Increases Thermostability of a Mesophilic 1,3-1,4-β-Glucanase from Bacillus terquilensis

1,3–1,4-β-glucanase is an important biocatalyst in brewing industry and animal feed industry, while its low thermostability often reduces its application performance. In this study, the thermostability of a mesophilic β-glucanase from Bacillus terquilensis was enhanced by rational design and engineering of disulfide bonds in the protein structure. Protein spatial configuration was analyzed to pre-exclude the residues pairs which negatively conflicted with the protein structure and ensure the contact of catalytic center. The changes in protein overall and local flexibility among the wild-type enzyme and the designated mutants were predicted to select the potential disulfide bonds for enhancement of thermostability. Two residue pairs (N31C-T187C and P102C-N125C) were chosen as engineering targets and both of them were proved to significantly enhance the protein thermostability. After combinational mutagenesis, the double mutant N31C-T187C/P102C-N125C showed a 48.3% increase in half-life value at 60°C and a 4.1°C rise in melting temperature (T_m) compared to wild-type enzyme. The catalytic property of N31C-T187C/P102C-N125C mutant was similar to that of wild-type enzyme. Interestingly, the optimal pH of double mutant was shifted from pH6.5 to pH6.0, which could also increase its industrial application. By comparison with mutants with single-Cys substitutions, the introduction of disulfide bonds and the induced new hydrogen bonds were proved to result in both local and overall rigidification and should be responsible for the improved thermostability. Therefore, the introduction of disulfide bonds for thermostability improvement could be rationally and highly-effectively designed by combination with spatial configuration analysis and molecular dynamics simulation.     

Hyperthermostabilization of Bacillus licheniformis alpha-amylase and modulation of its stability over a 50 degrees C temperature range

Bacillus licheniformis alpha-amylase (BLA) is a highly thermostable starch-degrading enzyme that has been extensively studied in both academic and industrial laboratories. For over a decade, we have investigated BLA thermal properties and identified amino acid substitutions that significantly increase or decrease the thermostability. This paper describes the cumulative effect of some of the most beneficial point mutations identified in BLA. Remarkably, the Q264S-N265Y double mutation led to a rather limited gain in stability but significantly improved the amylolytic function. The most hyperthermostable variants combined seven amino acid substitutions and inactivated over 100 times more slowly and at temperatures up to 23 degrees C higher than the wild-type enzyme. In addition, two highly destabilizing mutations were introduced in the metal binding site and resulted in a decrease of 25 degrees C in the half-inactivation temperature of the double mutant enzyme compared with wild-type. These mutational effects were analysed by protein modelling based on the recently determined crystal structure of a hyperthermostable BLA variant. Our engineering work on BLA shows that the thermostability of an already naturally highly thermostable enzyme can be substantially improved and modulated over a temperature range of 50 degrees C through a few point mutations.     

过氧化氢酶Ⅰ结构延伸突变改善酶热稳定性的初步研究

嗜热脂肪芽孢杆菌过氧化氢酶Ⅰ及其取代突变酶８８（２５）的延伸突变是指在酶蛋白的Ｃ末端上连接一段随机肽链,从而改变了酶蛋白的结构．研究结果表明,这种延伸突变的方法非常有效地提高了酶的热稳定性,并且随机肽链的疏水性与其对应的延伸突变体酶的热稳定性呈现一定的负相关性,即随机肽链的疏水性越高,对应的突变体酶热稳定性越低     

Production and characterization of a thermostable protease produced by an asporogenous mutant ofBacillus stearothermophilus

Summary An asporogenous mutant ofBacillus stearothermophilus (TPM-8) which produces 4-fold higher levels of a thermostable neutral protease than does wild-type strain 308-1 was obtained by mutagenesis with ethyl methanesulfonate. The protease produced by both the mutant and wild-type strain is a metalloprotease requiring Zn²⁺ and Ca²⁺ for activity and thermostability, respectively. It has a temperature optimum of 80°C at pH 7.0 and is highly thermostable, retaining 60% of its activity after 60 min at 85°C. The properties of the enzyme are similar to those of thermolysin.     

Increased thermostability of microbial transglutaminase by combination of several hot spots evolved by random and saturation mutagenesis

The thermostability of microbial transglutaminase (MTG) of Streptomyces mobaraensis was further improved by saturation mutagenesis and DNA-shuffling. High-throughput screening was used to identify clones with increased thermostability at 55°C. Saturation mutagenesis was performed at seven "hot spots", previously evolved by random mutagenesis. Mutations at four positions (2, 23, 269, and 294) led to higher thermostability. The variants with single amino acid exchanges comprising the highest thermostabilities were combined by DNA-shuffling. A library of 1,500 clones was screened and variants showing the highest ratio of activities after incubation for 30 min at 55°C relative to a control at 37°C were selected. 116 mutants of this library showed an increased thermostability and 2 clones per deep well plate were sequenced (35 clones). 13 clones showed only the desired sites without additional point mutations and eight variants were purified and characterized. The most thermostable mutant (triple mutant S23V-Y24N-K294L) exhibited a 12-fold higher half-life at 60°C and a 10-fold higher half-life at 50°C compared to the unmodified recombinant wild-type enzyme. From the characterization of different triple mutants differing only in one amino acid residue, it can be concluded that position 294 is especially important for thermostabilization. The simultaneous exchange of amino acids at sites 23, 24, 269 and 289 resulted in a MTG-variant with nearly twofold higher specific activity and a temperature optimum of 55°C. A triple mutant with amino acid substitutions at sites 2, 289 and 294 exhibits a temperature optimum of 60°C, which is 10°C higher than that of the wild-type enzyme.     

Enhanced thermostability of keratinase by computational design and empirical mutation

Keratinases are proteolytic enzymes capable of degrading insoluble keratins. The importance of these enzymes is being increasingly recognized in fields as diverse as animal feed production, textile processing, detergent formulation, leather manufacture, and medicine. To enhance the thermostability of Bacillus licheniformis BBE11-1 keratinase, the PoPMuSiC algorithm was applied to predict the folding free energy change (ΔΔG) of amino acid substitutions. Use of the algorithm in combination with molecular modification of homologous subtilisin allowed the introduction of four amino acid substitutions (N122Y, N217S, A193P, N160C) into the enzyme by site-directed mutagenesis, and the mutant genes were expressed in Bacillus subtilis WB600. The quadruple mutant displayed synergistic or additive effects with an 8.6-fold increase in the t _1/2 value at 60 °C. The N122Y substitution also led to an approximately 5.6-fold increase in catalytic efficiency compared to that of the wild-type keratinase. These results provide further insight into the thermostability of keratinase and suggest further potential industrial applications.     

The effect of cavity-filling mutations on the thermostability of Bacillus stearothermophilus neutral protease.

Cavities in the hydrophobic core of the neutral protease of Bacillus stearothermophilus were analyzed using a three-dimensional model that was inferred from the crystal structure of thermolysin, the highly homologous neutral protease of B. thermoproteolyticus (85% sequence identity). Site-directed mutagenesis was used to fill some of these cavities, thereby improving hydrophobic packing in the protein interior. The mutations had small effects on the thermostability, even after drastic changes, such as Leu284----Trp and Met168----Trp. The effects on T50, the temperature at which 50% of the enzyme is irreversibly inactivated in 30 min, ranged from 0.0 to +0.4 degrees C. These results can be explained by assuming that the mutations have positive and negative structural effects of approximately the same magnitude. Alternatively, it could be envisaged that the local unfolding steps, which render the enzyme susceptible towards autolysis and which are rate limiting in the process of thermal inactivation, are only slightly affected by alterations in the hydrophobic core.     

Improved thermostability of bacillus circulans cyclodextrin glycosyltransferase by the introduction of a salt bridge

Cyclodextrin glycosyltransferase (CGTase) catalyzes the formation of cyclodextrins from starch. Among the CGTases with known three-dimensional structure, Thermoanaerobacterium thermosulfurigenes CGTase has the highest thermostability. By replacing amino acid residues in the B-domain of Bacillus circulans CGTase with those from T. thermosulfurigenes CGTase, we identified a B. circulans CGTase mutant (with N188D and K192R mutations), with a strongly increased activity half-life at 60 degrees C. Asp188 and Arg192 form a salt bridge in T. thermosulfurigenes CGTase. Structural analysis of the B. circulans CGTase mutant revealed that this salt bridge is also formed in the mutant. Thus, the activity half-life of this enzyme can be enhanced by rational protein engineering.     

The consensus concept for thermostability engineering of proteins: further proof of concept

Previously, we calculated a consensus amino acid sequence from 13 homologous fungal phytases. A synthetic gene was constructed and recombinantly expressed. Surprisingly, consensus phytase-1 was 15-26 degrees C more thermostable than all parent phytases used in its design [Lehmann et al. (2000)Protein Eng., 13, 49-57]. In the present study, inclusion of six further phytase sequences in the amino acid sequence alignment resulted in the replacement of 38 amino acid residues in either one or both of the new consensus phytases-10 and -11. Since consensus phytase-10, again, was 7.4 degrees C more thermostable than consensus phytase-1, the thermostability effects of most of the 38 amino acid substitutions were tested by site-directed mutagenesis. Both stabilizing and destabilizing mutations were identified, but all affected the stability of the enzyme by <3 degrees C. The combination of all stabilizing amino acid exchanges in a multiple mutant of consensus phytase-1 increased the unfolding temperature from 78.0 to 88.5 degrees C. Likewise, back-mutation of four destabilizing amino acids and introduction of an additional stabilizing amino acid in consensus phytase-10 further increased the unfolding temperature from 85.4 to 90.4 degrees C. The thermostabilization achieved is the result of a combination of slight improvements from multiple amino acid exchanges rather than being the effect of a single or of just a few dominating mutations that have been introduced by chance. The present findings support the general validity of the consensus concept for thermostability engineering of proteins.     

Directed evolution of Thermus maltogenic amylase toward enhanced thermal resistance

The thermostability of maltogenic amylase from Thermus sp. strain IM6501 (ThMA) was improved greatly by random mutagenesis using DNA shuffling. Four rounds of DNA shuffling and subsequent recombination of the mutations produced the highly thermostable mutant enzyme ThMA-DM, which had a total of seven individual mutations. The seven amino acid substitutions in ThMA-DM were identified as R26Q, S169N, I333V, M375T, A398V, Q411L, and P453L. The optimal reaction temperature of the recombinant enzyme was 75 degrees C, which was 15 degrees C higher than that of wild-type ThMA, and the melting temperature, as determined by differential scanning calorimetry, was increased by 10.9 degrees C. The half-life of ThMA-DM was 172 min at 80 degrees C, a temperature at which wild-type ThMA was completely inactivated in less than 1 min. Six mutations that were generated during the evolutionary process did not significantly affect the specific activity of the enzyme, while the M375T mutation decreased activity to 23% of the wild-type level. The molecular interactions of the seven mutant residues that contributed to the increased thermostability of the mutant enzyme with other adjacent residues were examined by comparing the modeled tertiary structure of ThMA-DM with those of wild-type ThMA and related enzymes. The A398V and Q411L substitutions appeared to stabilize the enzyme by enhancing the interdomain hydrophobic interactions. The R26Q and P453L substitutions led potentially to the formation of genuine hydrogen bonds. M375T, which was located near the active site of ThMA, probably caused a conformational or dynamic change that enhanced thermostability but reduced the specific activity of the enzyme.     

Experimental sketch of landscapes in protein sequence space

A landscape in protein sequence space shows the relationship between the primary structure and the level of a property of each protein. We developed methods for observing local landscapes experimentally using catalase I from Bacillus stearothermophilus with respect to its catalatic activity, peroxidatic activity, and thermostability. The enzyme gene was randomly mutated and a mutant library composed of 2648 transformants was obtained. Based on the activity and productivity of these transformants, 82 were selected as a sample group for measuring the altitude of catalase I. The altitude of the wild-type enzyme is close to the highest level in the mutant population for the thermostability landscape, but is at the average level for the peroxidatic activity. As for the catalatic activity, its altitude lies in between the two positions. A positive correlation was found between the altitudes of the catalatic and the peroxidatic activities, indicating that the locations of the hills and valleys in the landscapes of the two activities roughly correspond with each other. In contrast, the thermostability landscape appeared quite differently. The smoothness of the landscape was examined via the number of mutations in the structural genes of the mutant enzymes of different properties. The correlation between the number of mutations and the level of each property showed that the thermostability landscape is smooth, but not the two activity landscapes. Thus, the results show that even from a rough sketch of the landscapes based on the experimental data, the characteristic features of catalase I can be elucidated. The sketch of a landscape, therefore, provides a new view in understanding enzymes.     

地衣芽胞杆菌来源角蛋白酶N端对活力及其热稳定性的影响

【目的】通过对一株地衣芽孢杆菌来源的角蛋白酶N端进行分子改造,研究其对角蛋白酶活力和热稳定性的影响,进而提高角蛋白酶的热稳定性。【方法】将角蛋白酶N端前5个氨基酸进行分段缺失,并通过序列比对将N端的前5个氨基酸替换为来源于Thermoactinomyces vulgaris的嗜热蛋白酶的N端,将野生型和突变体角蛋白酶基因在枯草芽孢杆菌WB600中进行表达,并对重组酶进行纯化与酶学性质研究。【结果】角蛋白酶N端不同长度的缺失大幅度地降低了角蛋白酶的活力,其中缺失前5个氨基酸完全丧失了酶活力。将角蛋白酶N端前5个氨基酸替换为嗜热蛋白酶N端前12个氨基酸,虽然降低了近70%的活力,但是却增加了角蛋白酶的热稳定性,60°C条件下的半衰期t1/2由原来的9 min提高到20 min。【结论】角蛋白酶的N端对其酶活力具有较大的影响,与嗜热蛋白酶来源的N端进行替换可以有效提高角蛋白酶的热稳定性。     

Enhancement of the thermostability of subtilisin E by introduction of a disulfide bond engineered on the basis of structural comparison with a thermophilic serine protease

Sites for Cys substitutions to form a disulfide bond were chosen in subtilisin E from Bacillus subtilis, a cysteine-free bacterial serine protease, based on the structure of aqualysin I of Thermus aquaticus YT-1 (a thermophilic subtilisin-type protease containing two disulfide bonds). Cys residues were introduced at positions 61 (wild-type, Gly) and 98 (Ser) in subtilisin E by site-directed mutagenesis. The Cys-61/Cys-98 mutant subtilisin appeared to form a disulfide bond spontaneously in the expression system used and showed a catalytic efficiency equivalent to that of the wild-type enzyme for hydrolysis of a synthetic peptide substrate. The thermodynamic characteristics of these enzymes were examined in terms of enzyme autolysis (t1/2) and thermal stability (Tm). The half-life of the Cys-61/Cys-98 mutant was found to be 2-3 times longer than that of the wild-type enzyme. Similar results were obtained by differential scanning calorimetry. The disulfide mutant showed a Tm of 63.0 degrees C, which was 4.5 degrees C higher than that observed for the wild-type enzyme. Under reducing conditions, however, the characteristics of the mutant enzyme were found to revert to those of the wild-type enzyme. These results strongly suggest that the introduction of a disulfide bond by site-directed mutagenesis enhanced the thermostability of subtilisin E without changing the catalytic efficiency of the enzyme.