Inactivation of ompX causes increased interactions of type 1 fimbriated Escherichia coli with abiotic surfaces

During the initial steps of biofilm formation, bacteria have to adapt to a major change in their environment. The adhesion-induced phenotypic changes in a type 1 fimbriated Escherichia coli strain included reductions in the levels of several outer membrane proteins, one of which was identified as OmpX. Here, the phenotypes of mutant strains that differ at the ompX locus were studied with regard to adhesion, cell surface properties, and resistance to stress and antimicrobial compounds. The kinetics of adhesion were measured online by an extended quartz crystal microbalance technique for wild-type and mutant strains with a fimbriated or nonfimbriated background. Deletion of ompX led to significantly increased cell-surface contact in fimbriated strains but to decreased cell-surface contact in a nonfimbriated strain. Phenotypic characterization of the ompX mutant demonstrated that ompX interferes with proper regulation of cell surface structures that play a key role in mediating firm contact of the cell with a surface (i.e., type 1 fimbriae, flagellae, and exopolysaccharides). These phenotypic changes were accompanied by increased tolerance to several antibiotic compounds and sodium dodecyl sulfate. Based on these results, we propose that changes in the composition of outer membrane proteins during fimbria-mediated adhesion may be part of a coordinated adaptive response to the attached mode of growth.     

Effect of Ionic Strength on Initial Interactions of Escherichia coli with Surfaces, Studied On-Line by a Novel Quartz Crystal Microbalance Technique

A novel quartz crystal microbalance (QCM) technique was used to study the adhesion of nonfimbriated and fimbriated Escherichia coli mutant strains to hydrophilic and hydrophobic surfaces at different ionic strengths. This technique enabled us to measure both frequency shifts (Deltaf), i.e., the increase in mass on the surface, and dissipation shifts (DeltaD), i.e., the viscoelastic energy losses on the surface. Changes in the parameters measured by the extended QCM technique reflect the dynamic character of the adhesion process. We were able to show clear differences in the viscoelastic behavior of fimbriated and nonfimbriated cells attached to surfaces. The interactions between bacterial cells and quartz crystal surfaces at various ionic strengths followed different trends, depending on the cell surface structures in direct contact with the surface. While Deltaf and DeltaD per attached cell increased for nonfimbriated cells with increasing ionic strengths (particularly on hydrophobic surfaces), the adhesion of the fimbriated strain caused only low-level frequency and dissipation shifts on both kinds of surfaces at all ionic strengths tested. We propose that nonfimbriated cells may get better contact with increasing ionic strengths due to an increased area of contact between the cell and the surface, whereas fimbriated cells seem to have a flexible contact with the surface at all ionic strengths tested. The area of contact between fimbriated cells and the surface does not increase with increasing ionic strengths, but on hydrophobic surfaces each contact point seems to contribute relatively more to the total energy loss. Independent of ionic strength, attached cells undergo time-dependent interactions with the surface leading to increased contact area and viscoelastic losses per cell, which may be due to the establishment of a more intimate contact between the cell and the surface. Hence, the extended QCM technique provides new qualitative information about the direct contact of bacterial cells to surfaces and the adhesion mechanisms involved.     

Role of Type 1 Fimbriae in the Adhesion of Escherichia coli to Salivary Mucin and Secretory Immunoglobulin A

Saliva is known to modulate the adhesion of bacteria in the oral cavity. The present work was performed to assess the effect of salivary components on the adhesion of Escherichia coli to a model oral surface. Several genetically engineered E. coli strains were used to examine the role of type 1 fimbriation in the interaction of these strains with salivary components in solution or adsorbed to hydroxyapatite. High (MG1) and low (MG2) molecular weight salivary mucins, and secretory immunoglobulin A (sIgA), were found to interact with the surface of E. coli, and these interactions were independent of the expression of fimbriae or capsule. In contrast, fimbriated strains of E. coli adhered to a greater extent to saliva-coated synthetic hydroxyapatite (HAP) than did nonfimbriated strains. Testing of salivary components separated by gel filtration chromatography revealed that only high-molecular-weight components promoted adhesion of E. coli to HAP. Additional studies found that purified MG2 and sIgA promoted the adhesion of E. coli to HAP. Expression of type 1 fimbriae enhanced adhesion, while mannose inhibited adhesion of fimbriated strains, to saliva-coated HAP and to HAP coated with MG2 and sIgA. We conclude that salivary MG2 and sIgA may provide receptors for the adhesion of type 1 fimbriated E. coli to oral surfaces. Received: 10 February 1996 / Accepted: 11 March 1996     

Moraxella (Branhamella) catarrhalis Adherence to Human Bronchial and Oropharyngeal Cells: The Role of Adherence in Lower Respiratory Tract Infections

To study the role of Moraxella (subgenus Branhamella) catarrhalis (B. catarrhalis) adherence to airway cells in lower respiratory tract infections, the in vitro attachments of B. catarrhalis to upper airway (oropharyngeal) and lower airway (bronchial) epithelial cells were compared. The adherence of 4 strains (1 nonfimbriated and 3 fimbriated) of B. catarrhalis to respiratory tract epithelial cells collected from 11 patients with chronic pulmonary disease (CPD) and 11 healthy individuals was evaluated. Both the fimbriated and nonfimbriated strains showed increased attachment to oropharyngeal cells in the CPD patients (mean ± SEM; 25.0 ± 3.2/cell; P < 0.01) when compared to the control subjects (12.1 ± 1.1/cell). On the average, the attachment to bronchial cells was 6.1 to 13.6 times greater per surface area (bacteria/μ²) than the attachment to oropharyngeal cells. The fimbriated strains tended to adhere in higher numbers to bronchial cells (19.0 ± 1.8/cell) than the nonfimbriated strain (8.7 ± 1.2/cell), although there was no difference between the CPD and control groups. In conclusion, the attachment of B. catarrhalis to oropharyngeal cells may be an enhancing factor for colonization in the upper respiratory tract in patients with CPD, and elevated adherence of the bacteria to bronchial cells may suggest pathogenic importance when mucociliary function is impaired.     

Fimbriae mediated nonspecific adhesion of Salmonella typhimurium to mineral particles

The adhesion of cells of Salmonella typhimurium to albite, biotite, felspar, magnetite and quartz was correlated to the presence of fimbriae and degree of hydrophobicity and charge of the bacterial surface. It was found that the presence of fimbriae resulted in a higher degree of adhesion compared to adhesion of nonfimbriated cells. The significance of the physico-chemical characteristics of fimbriae was shown by a direct linearity between high hydrophobicity of fimbriated cells and degree of adhesion to the mineral particles. Fimbriated cells exhibited higher negative as well as positive surface charge as compared to nonfimbriated cells. Adhesion to several of the minerals was shown to be independent of the extent of negative charges on the bacterial surfaces. A high degree of adhesion to biotite, possibly due to a combination of characteristics of the particles, was not related to either bacterial fimbriation or a physico-chemical characteristic of the bacterial surface. The results of the nonspecific adhesion observed are discussed in terms of available binding sites and distribution of physico-chemical characteristics on the bacterial cell surface structures.     

Shear-dependent 'stick-and-roll' adhesion of type 1 fimbriated Escherichia coli

It is generally assumed that bacteria are washed off surfaces as fluid flow increases because they adhere through 'slip-bonds' that weaken under mechanical force. However, we show here that the opposite is true for Escherichia coli attachment to monomannose-coated surfaces via the type 1 fimbrial adhesive subunit, FimH. Raising the shear stress (within the physiologically relevant range) increased accumulation of type 1 fimbriated bacteria on monomannose surfaces by up to two orders of magnitude, and reducing the shear stress caused them to detach. In contrast, bacterial binding to anti-FimH antibody-coated surfaces showed essentially the opposite behaviour, detaching when the shear stress was increased. These results can be explained if FimH is force-activated; that is, that FimH mediates 'catch-bonds' with mannose that are strengthened by tensile mechanical force. As a result, on monomannose-coated surfaces, bacteria displayed a complex 'stick-and-roll' adhesion in which they tended to roll over the surface at low shear but increasingly halted to stick firmly as the shear was increased. Mutations in FimH that were predicted earlier to increase or decrease force-induced conformational changes in FimH were furthermore shown here to increase or decrease the probability that bacteria exhibited the stationary versus the rolling mode of adhesion. This 'stick-and-roll' adhesion could allow type 1 fimbriated bacteria to move along mannosylated surfaces under relatively low flow conditions and to accumulate preferentially in high shear regions.     

Adhesion of the positively charged bacterium Stenotrophomonas (Xanthomonas) maltophilia 70401 to glass and Teflon.

Medical implants are often colonized by bacteria which may cause severe infections. The initial step in the colonization, the adhesion of bacteria to the artificial solid surface, is governed mainly by long-range van der Waals and electrostatic interactions between the solid surface and the bacterial cell. While van der Waals forces are generally attractive, the usually negative charge of bacteria and solid surfaces leads to electrostatic repulsion. We report here on the adhesion of a clinical isolate, Stenotrophomonas maltophilia 70401, which is, at physiological pH, positively charged. S. maltophilia has an electrophoretic mobility of +0.3 x 10(-8) m2 V-1 s-1 at pH 7 and an overall surface isoelectric point at pH 11. The positive charge probably originates from proteins located in the outer membrane. For this bacterium, both long-range forces involved in adhesion are attractive. Consequently, adhesion of S. maltophilia to negatively charged surfaces such as glass and Teflon is much favored compared with the negatively charged bacterium Pseudomonas putida mt2. While adhesion of negatively charged bacteria is impeded in media of low ionic strength because of a thick negatively charged diffuse layer, adhesion of S. maltophilia was particularly favored in dilute medium. The adhesion efficiencies of S. maltophilia at various ionic strengths could be explained in terms of calculated long-range interaction energies between S. maltophilia and glass or Teflon.     

Comparative antigenic proteins and proteomics of pathogenic Yersinia enterocolitica bio-serotypes 1B/O: 8 and 2/O: 9 cultured at 25°C and 37°C

Yersinia enterocolitica is a Gram-negative enteric pathogen responsible for a number of gastrointestinal disorders; the most pathogenic bio-serotype is 1B/O: 8. In this study, we compared the antigenicity of the outer membrane proteins and proteomics of the whole-cell proteins of a pathogenic bio-serotype 2/O: 9 isolated in China and a bio-serotype 1B/O: 8 strain isolated in Japan. Using two-dimensional gel electrophoresis, we showed that the outer membrane proteins A (OmpA), C (OmpC) and F (OmpF) were the major antigens for both strains, although proteins located on the bacterial cell membrane and enzymes involved in energy metabolism were also identified as antigenic. We compared the whole-cell proteins of the two strains cultured at 25°C and 37°C and found portions of the outer membrane proteins (OmpX, OmpF and OmpA) were downregulated when the bacteria were cultured at 37°C, whereas urease subunit gamma (UreA), urease subunit alpha (UreC) and urease accessory protein (UreE), which are involved in urease synthesis, were upregulated when the bacteria were grown at 37°C. These observations will lay a foundation to selection of diagnostic markers for pathogenic Yersinia enterocolitica, and maybe contribute to choose the vaccine targets.     

Vaginal epithelial cells regulate membrane adhesiveness to co‐ordinate bacterial adhesion

Vaginal epithelium is colonized by different bacterial strains and species. The bacterial composition of vaginal biofilms controls the balance between health and disease. Little is known about the relative contribution of the epithelial and bacterial cell surfaces to bacterial adhesion and whether and how adhesion is regulated over cell membrane regions. Here, we show that bacterial adhesion forces with cell membrane regions not located above the nucleus are stronger than with regions above the nucleus both for vaginal pathogens and different commensal and probiotic lactobacillus strains involved in health. Importantly, adhesion force ratios over membrane regions away from and above the nucleus coincided with the ratios between numbers of adhering bacteria over both regions. Bacterial adhesion forces were dramatically decreased by depleting the epithelial cell membrane of cholesterol or sub‐membrane cortical actin. Thus, epithelial cells can regulate membrane regions to which bacterial adhesion is discouraged, possibly to protect the nucleus.     

The RgpB C-terminal domain has a role in attachment of RgpB to the outer membrane and belongs to a novel C-terminal-domain family found in Porphyromonas gingivalis

Porphyromonas gingivalis produces outer membrane-attached proteins that include the virulence-associated proteinases RgpA and RgpB (Arg-gingipains) and Kgp (Lys-gingipain). We analyzed the P. gingivalis outer membrane proteome and identified numerous proteins with C-terminal domains similar in sequence to those of RgpB, RgpA, and Kgp, indicating that these domains may have a common function. Using RgpB as a model to investigate the role of the C-terminal domain, we expressed RgpB as a full-length zymogen (recombinant RgpB [rRgpB]), with a catalytic Cys244Ala mutation [rRgpB(C244A)], or with the C-terminal 72 amino acids deleted (rRgpB435) in an Arg-gingipain P. gingivalis mutant (YH522AB) and an Arg- and Lys-gingipain mutant (YH522KAB). rRgpB was catalytically active and located predominantly attached to the outer membrane of both background strains. rRgpB(C244A) was inactive and outer membrane attached, with a typical attachment profile for both background strains according to sodium dodecyl sulfate-polyacrylamide gel electrophoresis, but in YH522KAB, the prodomain was not removed. Thus, in vivo, RgpB export and membrane attachment are independent of the proteolytic activity of RgpA, RgpB, or Kgp. However, for maturation involving proteolytic processing of RgpB, the proteolytic activity of RgpB, RgpA, or Kgp is required. The C-terminally-truncated rRgpB435 was not attached to the outer membrane and was located as largely inactive, discrete 71-kDa and 48-kDa isoforms in the culture supernatant and the periplasm. These results suggest that the C-terminal domain is essential for outer membrane attachment and may be involved in a coordinated process of export and attachment to the cell surface.     

Role of type 1 fimbriae and mannose in the development of Escherichia coli K12 biofilm: from initial cell adhesion to biofilm formation

The influence of type 1 fimbriae, mannose-sensitive structures, on biofilm development and maturation has been examined by the use of three isogenic Escherichia coli K12 strains: wild type, fimbriated, and non-fimbriated. Experiments with the three strains were done in minimal medium or Luria–Bertani broth supplemented with different concentrations of d-mannose. The investigation consisted of: (1) characterizing the bacterial surface of the three strains with respect to hydrophilicity and surface charge, (2) investigating the effect of type 1 fimbriae on bacterial adhesion rate and reversibility of initial adhesion on glass surfaces, and (3) verifying the role of type 1 fimbriae and exopolysaccharides (EPS) in biofilm maturation. The results suggest that type 1 fimbriae are not required for the initial bacterial adhesion on glass surfaces as the non-fimbriated cells had higher adhesion rates and irreversible deposition. Type 1 fimbriae, however, are critical for subsequent biofilm development. It was hypothesized that in the biofilm maturation step, the cells synthesize mannose-rich EPS, which functions as a ‘conditioning film’ that can be recognized by the type 1 fimbriae.     

Localization and characterization of three different beta-adrenergic receptors expressed in Escherichia coli

After fusion with the N-proximal portion of the outer membrane protein LamB, three beta-adrenergic receptors, the human beta 1- and beta 2- and turkey beta 1-adrenergic receptor, were expressed in Escherichia coli with retention of their own specific pharmacological properties. Molecular characterization and localization of the three receptors in bacteria and comparison of the behaviour of each hybrid protein are reported. The bacteria were lysed and fractionated on a sucrose gradient. Saturable [125I]iodocyanopindolol binding activity was found associated mainly with the inner membrane fraction, suggesting that the receptor is correctly folded in this membrane. Binding activity was also found in the outer membrane fraction but varied according to the receptor type. Photoaffinity labeling experiments revealed that the receptors exhibit binding activity only after proteolytic removal of the LamB moiety from the fusion protein. The three hybrid proteins, detected in immunoblots by anti-peptide antibodies, were found mainly in the outer membrane fraction. Each of them exhibited different susceptibility to intrinsic bacterial proteolytic enzymes; sites of proteolytic cleavage were localized by the use of anti-peptide antibodies. The functional expression in E. coli of three beta-adrenergic receptors with similar structure but different amino acid sequences suggests that this expression system may be a general feature among similar receptors of the family of G-protein-coupled receptors. The level of expressed binding activity of a given receptor will be within the control of proteolytic degradation processes, depending on the primary sequence of the receptor. Constructions of new hybrid proteins, in combination with expression in protease mutants of E. coli, should help in controlling such processes.     

Major heat-modifiable outer membrane protein in gram-negative bacteria: comparison with the ompA protein of Escherichia coli.

The outer membranes of several strains of Escherichia coli, other enteric bacteria, and a variety of nonenteric gram-negative bacteria all contain a major heat-modifiable protein similar to the OmpA protein of E. coli K-12. The heat-modifiable proteins from these bacteria resemble the K-12 protein in molecular weight, in preferential release from the outer membrane by sodium dodecyl sulfate in the presence of Mg2+, and in characteristic cleavage by proteases to yield a smaller fragment which remains membrane bound. Antiserum directed against the K-12 protein precipitated the heat-modifiable protein from all strains of Enterobacteriaceae, and chemical comparison by isoelectric focusing, cyanogen bromide cleavage profiles, and proteolytic peptide analysis indicated that the proteins from the various enteric bacteria were nearly identical in primary structure. The heat-modifiable proteins from bacteria phylogenically distant from E. coli shared many of the properties of the E. coli protein but were chemically distinct. Thus, it appears that the structure (and, presumably, the function) of the heat-modifiable protein of gram-negative bacteria is strongly conserved during evolution.     

Effect of defined lipopolysaccharide core defects on resistance of Salmonella typhimurium to freezing and thawing and other stresses

A family of mutants of Salmonella typhimurium with altered lipopolysaccharide (LPS) core chain lengths were assessed for sensitivity to freeze-thaw and other stresses. Deep rough strains with decreased chain length in the LPS core were more susceptible to novobiocin, polymyxin B, bacitracin, and sodium lauryl sulfate during growth, to ethylenediaminetetraacetic acid and sodium lauryl sulfate in resting suspension, and to slow and rapid freeze-thaw in water and saline, and these strains exhibited more outer membrane damage than the wild type or less rough strains. Variations in the LPS chain length did not dramatically affect the sensitivity of the strains to tetracycline, neomycin, or NaCl in growth conditions or the degree of freeze-thaw-induced cytoplasmic membrane damage. The deeper rough isogenic strains incorporated larger quantities of less-stable LPS and less protein into the outer membrane than did the wild type or less rough mutants, indicating that the mutations affected outer membrane synthesis or organization or both. Nikaido's model of the role of LPS and protein in determining the resistance of gram-negative bacteria to low-molecular-weight hydrophobic antibiotics is discussed in relation to the stress of freeze-thaw.     

Strain-specific variation in the protein and lipopolysaccharide composition of the group B meningococcal outer membrane.

Variation in the protein and lipopolysaccharide composition of the meningococcal outer membrane may be due to either serotype differences or to changes in cultural conditions. There are 12 antigenically distinct serotypes of group B meningococci, and these are associated with distinct major outer membrane protein patterns on sodium dodecyl sulfate-polyacrylamide gels. In most strains the predominant outer membrane protein carries the serotype-specific determinant. Certain strains, when grown under similar conditions in different media showed an altered membrane composition. The type 2 strain, M986, grown in modified Frantz medium-A, had a reduced amount of the major 41,000-dalton protein while a 28,000-dalton protein predominated. The altered protein composition may be related to changes in cell metabolism as reflected by the pH of the medium after growth. Growth of the organism in Frantz medium-B caused a negligible drop in pH and the 41,000-dalton protein remained predominant. There was also variation associated with changes in the growth rate. Increasing the aeration caused a concomitant increase in growth rate and cell yield. We observed two quantitative changes in outer membrane proteins in four of seven strains examined: (i) where only a single major protein changed (three strains), and (ii) where an increase in one protein component was associated with a decrease in another protein (one strain). When the strains were grown in tryptic soy broth (Difco Laboratories, Detroit, Mich.) with either high or low aeration, the total protein in the outer membrane remained constant. In contrast, with high aeration there was a significant increase in lipopolysaccharide. These studies suggest that the cell surface proteins may be altered by the organism to meet a variety of environmental conditions.     

Identification of outer membrane proteins with emulsifying activity by prediction of beta-barrel regions

Microbial bioemulsifiers are secreted by many bacteria and are important for bacterial interactions with hydrophobic substrates or nutrients and for a variety of biotechnological applications. We have recently shown that the OmpA protein in several members of the Acinetobacter family has emulsifying properties. These properties of OmpA depend on the amino acid composition of four putative extra-membrane loops, which in various strains of Acinetobacter, but not in E. coli, are highly hydrophobic. As many Acinetobacter strains can utilize hydrophobic carbon sources, such as oil, the emulsifying activity of their OmpA may be important for the utilization and uptake of hydrocarbons. We assumed that if outer membrane proteins with emulsifying activity are physiologically important, they may exist in additional oil degrading bacteria. In order to identify such proteins, it was necessary to obtain bioinformatics-based predictions for hydrophobic extra-membrane loops. Here we describe a method for using protein sequence data for predicting the hydrophobic properties of the extra-membrane loops of outer membrane proteins. The feasibility of this method is demonstrated by its use to identify a new microbial bioemulsifier - OprG - an outer membrane protein of the oil degrading Pseudomonas putida KT2440.     

Quorum-sensing regulation of adhesion in Serratia marcescens MG1 is surface dependent

Serratia marcescens is an opportunistic pathogen and a major cause of ocular infections. In previous studies of S. marcescens MG1, we showed that biofilm maturation and sloughing were regulated by N-acyl homoserine lactone (AHL)-based quorum sensing (QS). Because of the importance of adhesion in initiating biofilm formation and infection, the primary goal of this study was to determine whether QS is important in adhesion to both abiotic and biotic surfaces, as assessed by determining the degree of attachment to hydrophilic tissue culture plates and human corneal epithelial (HCE) cells. Our results demonstrate that while adhesion to the abiotic surface was AHL regulated, adhesion to the HCE cell biotic surface was not. Type I fimbriae were identified as the critical adhesin for non-QS-mediated attachment to the biotic HCE cell surface but played no role in adhesion to the abiotic surface. While we were not able to identify a single QS-regulated adhesin essential for attachment to the abiotic surface, four AHL-regulated genes involved in adhesion to the abiotic surface were identified. Interestingly, two of these genes, bsmA and bsmB, were also shown to be involved in adhesion to the biotic surface in a non-QS-controlled fashion. Therefore, the expression of these two genes appears to be cocontrolled by regulators other than the QS system for mediation of attachment to HCE cells. We also found that QS in S. marcescens regulates other potential cell surface adhesins, including exopolysaccharide and the outer membrane protein OmpX. We concluded that S. marcescens MG1 utilizes different regulatory systems and adhesins in attachment to biotic and abiotic surfaces and that QS is a main regulatory pathway in adhesion to an abiotic surface but not in adhesion to a biotic surface.     

Listeria monocytogenes Biofilm-Associated Protein (BapL) May Contribute to Surface Attachment of L. monocytogenes but Is Absent from Many Field Isolates

Listeria monocytogenes is a food-borne pathogen capable of adhering to a range of surfaces utilized within the food industry, including stainless steel. The factors required for the attachment of this ubiquitous organism to abiotic surfaces are still relatively unknown. In silico analysis of the L. monocytogenes EGD genome identified a putative cell wall-anchored protein (Lmo0435 [BapL]), which had similarity to proteins involved in biofilm formation by staphylococci. An insertion mutation was constructed in L. monocytogenes to determine the influence of this protein on attachment to abiotic surfaces. The results show that the protein may contribute to the surface adherence of strains that possess BapL, but it is not an essential requirement for all L. monocytogenes strains. Several BapL-negative field isolates demonstrated an ability to adhere to abiotic surfaces equivalent to that of BapL-positive strains. BapL is not required for the virulence of L. monocytogenes in mice.     

Nonspecific adhesion of Staphylococcus aureus strains to solid surfaces

Autoagregating strains of bacteria are characterised by high surface hydrophobicity, which determines their ability to adhesion. An assessment was done of non-specific adhesion to solid surfaces of S. aureus strains isolated from blood, pus and nasopharynx of hospitalised people. The method used made possible differentiation of strains, which were studied, on the basis of their surface characteristics. Their properties decide about the abilities of strains to the colonisation of host tissues and at the same time they influence their potential virulence. In the study attention was also paid to the participation of surface proteins in the processes of adhesion cells to glass surfaces.     

Campylobacter jejuni major outer membrane protein and a 59-kDa protein are involved in binding to fibronectin and INT 407 cell membranes

Campylobacter jejuni is one of the major causes of human diarrhea throughout the world. Attachment to host cells and extracellular matrix proteins is considered to be an essential primary event in the pathogenesis of enteritis. Outer membrane proteins of three C. jejuni strains, one of which was aflagellate, were investigated for their contribution to the process of adhesion to INT 407 cell membranes and the extracellular matrix protein fibronectin. Using a ligand-binding immunoblotting assay the flagellin, the major outer membrane protein and a 59-kDa protein were detected to be involved in adhesion to both substrates. The MOMP was able to inhibit the attachment of the bacteria to INT 407 cell membranes partly, when the protein was isolated under native conditions. However, it was totally lost when the protein was isolated in the presence of SDS. The 59-kDa protein of one strain was identified by N-terminal sequencing, and regarding the first 14 amino acids it was found to be identical to the 37-kDa CadF protein just recently described as fibronectin-binding protein of C. jejuni. Especially for the aflagellate strain this protein may be of special importance for adhesion of the bacteria to different substrates.