Assessment of antibacterial activity of silver nanoparticles on Pseudomonas aeruginosa and its mechanism of action

Antimicrobial activity of silver nanoparticles is gaining importance due its broad spectrum of targets in cell compared to conventional antimicrobial agents. In this context, a UV photo-reduction method was used for the synthesis and the nanoparticles were characterized by UV–Visible spectroscopy, transmission electron microscopy, atomic force microscopy and thermogravimetric analysis techniques. The antibacterial activity of the synthesized silver nanoparticles was evaluated both in liquid and solid growth media employing various susceptibility assays on Pseudomonas aeruginosa, a ubiquitous bacterium. The dose dependent growth suppression by nanoparticles was studied with well diffusion method. By broth dilution method, the minimum inhibitory concentration (MIC) was found to be 2 μg/ml. It was observed that the bactericidal effect depends both on nanoparticle concentration and number of bacteria present. In our study, we could demonstrate the complete antibiofilm activity of silver nanoparticles at a concentration as low as 1 μg/ml. Our observations substantiated the association of reactive oxygen species and cell membrane damage in the antibacterial mechanism of silver nanoparticles. Our findings suggested that these nanoparticles can be exploited towards the development of potential antibacterial coatings for various biomedical and environmental applications.     

Exploring the Therapeutic Properties of Alga-Based Silver Nanoparticles: Anticancer,Antibacterial, and Free Radical Scavenging Capabilities

The current study was designed to evaluate the antioxidant, anticancer and antimicrobial activities of silver nanoparticles (AgNPs) biosynthesized by Spirulina platensis extract. The biosynthesized silver nanoparticles were characterized using Fourier transform infrared (FT-IR) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis. The antioxidant activity of the biosynthesized AgNPs were determined via DPPH radical scavenging assay while its anticancer activity was determined using the MTT assay. The antimicrobial activity of the biosynthesized AgNPs were analyzed by disc diffusion method. Spirulina platensis acts as a reducing and capping agent. The efficacy of silver nanoparticles (AgNPs) in inhibiting the growth of Gram-negative bacteria, specifically Acetobacter, Klebsiella, Proteus vulgaris, and Pseudomonas aeruginosa, was assessed by the utilisation of the diffusion method. The study aimed to evaluate the efficacy of biosynthesized silver nanoparticles (AgNPs) against many strains of Pseudomonas aeruginosa bacteria. The findings of the study revealed that when administered in doses of 50 μl, 75 μl, and 100 μl, the largest observed zone of inhibition corresponded to measurements of 10.5 mm, 14 mm, and 16 mm, respectively. A zone of inhibition with dimensions of 8 mm, 10.5 mm, and 12 mm was detected during testing against Acetobacter at concentrations of 50 μl, 75 μl, and 100 μl, respectively. The findings also indicate that there is a positive correlation between the concentration of AgNP and the DPPH scavenging ability of silver nanoparticles. The percentage of inhibition observed at concentrations of 500 μg/ml, 400 μg/ml, 300 μg/ml, 200 μg/ml, and 100 μg/ml were recorded as 80±1.98, 61±1.98, 52±1.5, 42±1.99, and 36±1.97, respectively. In addition, it was observed that the silver nanoparticles exhibited the greatest antioxidant activity at a concentration of 500 g/ml, with a measured value of 80.89±1.99. The IC-50 values, representing the inhibitory concentration required to achieve 50 % inhibition, were found to be 8.16, 19.15, 30.14, 41.13, and 63.11 at inhibition levels of 36±1.97, 42±1.99, 52±1.5, 61±1.98, and 80±1.98, respectively.     

Antibiofilm and antimicrobial activities of green synthesized silver nanoparticles using marine red algae Gelidium corneum

In our study, green synthesis of silver nanoparticles was carried out using a red algae Gelidium corneum extract as reducing agent. The obtained silver nanoparticles were characterized by UV–vis, TEM, XRD, FTIR and ICP-MS measurements. FTIR measurements indicated the possible functional groups responsible for the stabilization and reduction of nanoparticles, while XRD analysis results explained the crystalline structure of the particles with centric cubic geometry. TEM micrographs showed that the size of the nanoparticles was between 20–50 nm. According to the broth microdilution test results, AgNPs showed a high antimicrobial activity with very low MIC values (0.51 μg/ml for Candida albicans yeast and 0.26 μg/ml for Escherichia coli bacteria). The different ultrastructural effects of silver nanoparticles on yeast and bacterial cells were observed by TEM. Antibiofilm efficacy studies were also examined in two stages as prebiofilm and postbiofilm effect. In prebiofilm effect studies, AgNPs (0.51 μg/ ml) exhibited 81% reducing effect on biofilm formation. The highest reduction rate in postbiofilm studies was 73.5% and this was achieved with 2.04 μg/ml AgNPs. Our data support that the silver nanoparticles obtained by this environmentally friendly process have potential to be used for industrial and therapeutic purposes.     

Micro-Raman spectroscopy of silver nanoparticle induced stress on optically-trapped stem cells

We report here results of a single-cell Raman spectroscopy study of stress effects induced by silver nanoparticles in human mesenchymal stem cells (hMSCs). A high-sensitivity, high-resolution Raman Tweezers set-up has been used to monitor nanoparticle-induced biochemical changes in optically-trapped single cells. Our micro-Raman spectroscopic study reveals that hMSCs treated with silver nanoparticles undergo oxidative stress at doping levels in excess of 2 μg/ml, with results of a statistical analysis of Raman spectra suggesting that the induced stress becomes more dominant at nanoparticle concentration levels above 3 μg/ml.     

Synthesis of biocompatible chitosan decorated silver nanoparticles biocomposites for enhanced antimicrobial and anticancer property

Numerous studies investigated the biosynthesis of silver nanoparticles (AgNPs); however, there is a large gap for the ideal time-consuming process and their cytotoxicity. Herein, for the first time, rapid AgNPs was synthesized in a short time span, using Piper betle leaf (PBL) extract by applying microwave exposure. PB-AgNPs antibacterial activity and cell compatibility were enhanced by capping with chitosan (CS@PB-AgNPs). The synthesized nanoparticles were characterized by bioanalytical techniques. PB-AgNPs expressed significant antibacterial activity against Gram-positive and Gram-negative bacterial pathogens, while hybrid CS@PB-AgNPs presented the enhanced bactericidal activity. In addition, PB-AgNPs exhibited IC₅₀ value of 140 μg/mL against RAW 264.7 macrophages and 100 μg/mL against lung cancer cells while, CS capping reduced its toxicity at IC₅₀ values of 400 μg/mL and 180 μg/mL respectively were affirmed by MTT, apoptosis and DNA damage detection. Overall it was demonstrated that CS capping could be a phenomenal finding to improve the biomedical potential of AgNPs.     

Assessment of antimicrobial activity of nanosized Ag doped TiO2 colloids

In the present research, the antimicrobial effects of nanosized silver (Ag) doped TiO(2) colloidal solutions prepared using a sol-gel technique were investigated. In order to determine the solution characteristics, the turbidity, viscosity and pH of the colloidal solutions were measured. Differential thermal analysis-thermogravimetry equipment was used to determine the chemical structures and reaction types of the films formed from these solutions. The morphology of Ag doped TiO(2) nanoparticles was evaluated by atomic force microscopy. The disc diffusion method was employed to explore antimicrobial activity, and the Broth Microdilution method was used to obtain MIC values of nanosized Ag doped TiO(2) colloidal solutions against the test microorganisms Escherichia coli, Staphylococcus aureus, Candida albicans, Bacillus subtilis, and Salmonella typhimurium. It was found that the silver doped TiO(2) nanoparticles inhibited the growth and multiplication of the test microorganisms, including the fungus C. albicans. Antimicrobial activity was observed against all tested microorganisms at a very low concentration of 1.125-2.81 μg/ml of nano silver in 1-25 % Ag-TiO(2) solutions.     

Antibacterial activity of plastics coated with silver-doped organic-inorganic hybrid coatings prepared by sol-gel processes

Silver-doped organic-inorganic hybrid coatings were prepared starting from tetraethoxysilane- and triethoxysilane-terminated poly(ethylene glycol)-block-polyethylene by the sol-gel process. They were applied as a thin layer (0.6-1.1 microm) to polyethylene (PE) and poly(vinyl chloride) (PVC) films and the antibacterial activity of the coated films was tested against Gram-negative (Escherichia coli ATCC 25922) and Gram-positive (Staphylococcus aureus ATCC 6538) bacteria. The effect of several factors (such as organic-inorganic ratio, type of catalyst, time of post-curing, silver ion concentration, etc.) was investigated. Measurements at different contact times showed a rapid decrease of the viable count for both tested strains. The highest antibacterial activity [more than 6 log reduction within 6 h starting from 106 colony-forming units (cfu) mL-1] was obtained for samples with an organic-inorganic weight ratio of 80:20 and 5 wt % silver salt with respect to the coating. For the coatings prepared by an acid-catalyzed process, a high level of permanence of the antibacterial activity of the coated films was demonstrated by repeatedly washing the samples in warm water or by immersion in physiological saline solution at 37 degrees C for 3 days. The release of silver ions per square meter of coating is very similar to that previously observed for polyamides filled with metallic silver nanoparticles; however, when compared on the basis of Ag content, the concentration of silver ions released from the coating is much higher than that released from 1 mm thick specimens of polyamide (PA) filled with silver nanoparticles. Transparency and good adhesion of the coating to PE and PVC plastic substrates without any previous surface treatment are further interesting features.     

In vitro effects of silver nanoparticles on the mitochondrial respiratory chain

Silver has been used for years in medicine; it has known antimicrobial properties. Additionally, silver has been used in water and air filtration to eliminate microorganisms, and, more recently, as a biocide to prevent infections in burns. In contact with the human body, nanoparticles can elicit a spectrum of tissue responses such as the generation of reactive oxygen species, decreased function of mitochondria and even cell death. Mitochondries are intracellular organelles that play a crucial role in ATP production. In the present work, we evaluate the in vitro effect of silver nanoparticles (AgN) on the activities of mitochondrial respiratory chain complexes from the brain, skeletal muscle, heart, and liver of rats. Our results demonstrated that AgN (10, 25, and 50 mg l^?1) decreases the activity of mitochondrial respiratory chain complexes I, II, III, and IV from all tissues.     

Disinfection of bacteria in water systems by using electrolytically generated copper:silver and reduced levels of free chlorine

As an alternative disinfectant to chlorination, electrolytically generated copper:silver (400 and 40 micrograms/L copper and silver, respectively) with and without free chlorine (0.3 mg/L) was evaluated over a period of 4 weeks in indoor and outdoor water systems (100 L tap water with natural body flora and urine). Numbers of total coliform, pseudomonas, and staphylococci were all less than drinking water standards in systems treated with copper:silver and free chlorine and systems treated with free chlorine alone (1.0 mg/L). No significant differences (p less than or equal to 0.05) in bacterial numbers were observed between systems with copper:silver and free chlorine and those with free chlorine alone. Overall, free-chlorine treatments (0.3 or 1.0 mg/L) showed significantly lower heterotrophic plate numbers than those without free chlorine. When challenged with a natural Staphylococcus sp. isolate, water with copper:silver and free chlorine had a 2.4 log10 reduction in bacterial numbers within 2 min, while free chlorine alone or copper:silver alone showed 1.5 and 0.03 log10 reductions, respectively. Addition of copper:silver to water systems may allow the concentration of free chlorine to be reduced while still providing comparable sanitary quality of the water.     

Electrodeposition of gold-platinum alloy nanoparticles on ionic liquid-chitosan composite film and its application in fabricating an amperometric cholesterol biosensor

An electrodeposition method was applied to form gold-platinum (AuPt) alloy nanoparticles on the glassy carbon electrode (GCE) modified with a mixture of an ionic liquid (IL) and chitosan (Ch) (AuPt-Ch-IL/GCE). AuPt nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical methods. AuPt-Ch-IL/GCE electrocatalyzed the reduction of H(2)O(2) and thus was suitable for the preparation of biosensors. Cholesterol oxidase (ChOx) was then, immobilized on the surface of the electrode by cross-linking ChOx and chitosan through addition of glutaraldehyde (ChOx/AuPt-Ch-IL/GCE). The fabricated biosensor exhibited two wide linear ranges of responses to cholesterol in the concentration ranges of 0.05-6.2 mM and 6.2-11.2 mM. The sensitivity of the biosensor was 90.7 μA mM(-1) cm(-2) and the limit of detection was 10 μM of cholesterol. The response time was less than 7 s. The Michaelis-Menten constant (K(m)) was found as 0.24 mM. The effect of the addition of 1 mM ascorbic acid and glucose was tested on the amperometric response of 0.5 mM cholesterol and no change in response current of cholesterol was observed.     

Radiologic Evaluation of Bone Loss at Implants with Biocide Coated Titanium Abutments: A Study in the Dog

The objective of the present study is to evaluate bone loss at implant abutments coated with a soda-lime glass containing silver nanoparticles subjected to experimental peri-implantitis. Five beagle dogs were used in the experiments, 3 implants were installed in each quadrant of the mandibles. Glass/n-Ag coted abutments were connected to implant platform. Cotton floss ligatures were placed in a submarginal position around the abutment necks and the animals were subject to a diet which allowed plaque accumulation, and after 15 weeks the dogs were sacrificed. Radiographs of all implant sites were obtained at the beginning and at the end of the experimentally induced peri-implantitis. The radiographic examination indicated that significant amounts of additional bone loss occurred in implants without biocide coating, considering both absolute and relative values of bone loss. Percentages of additional bone loss observed in implants dressed with a biocide coated abutment were about 3 times lower (p<0.006 distal aspect; and p<0.031 at mesial aspect) than the control ones. Within the limits of the present study it seems promising the use of soda-lime glass/nAg coatings on abutments to prevent peri-implant diseases.     

Bimetallic PtM (M=Pd, Ir) nanoparticle decorated multi-walled carbon nanotube enzyme-free, mediator-less amperometric sensor for H₂O₂

A new highly catalytic and intensely sensitive amperometric sensor based on PtM (where M=Pd, Ir) bimetallic nanoparticles (NPs) for the rapid and accurate estimation of hydrogen peroxide (H(2)O(2)) by electrooxidation in physiological conditions is reported. PtPd and PtIr NPs-decorated multiwalled carbon nanotube nanocatalysts (PtM/MWCNTs) were prepared by a modified Watanabe method, and were characterized by XRD, TEM, ICP, and XAS. The sensors were constructed by immobilizing PtM/MWCNTs nanocatalysts in a Nafion film on a glassy carbon electrode. Both PtPd/MWCNTs and PtIr/MWCNTs assemblies catalyzed the electrochemical oxidation of H(2)O(2). Cyclic voltammetry characterization measurements revealed that both the PtM (M=Pd, Ir)/MWCNTs/GCE possessed similar electrochemical surface areas (～0.55 cm(2)), and electron transfer rate constants (～1.23 × 10(-3)cms(-1)); however, the PtPd sensor showed a better performance in H(2)O(2) sensing than did the PtIr counterpart. Explanations were sought from XAS measurements to explain the reasons for differences in sensor activity. When applied to the electrochemical detection of H(2)O(2), the PtPd/MWCNTs/GC electrode exhibited a low detection limit of 1.2 μM with a wide linear range of 2.5-125 μM (R(2)=0.9996). A low working potential (0V (SCE)), fast amperometric response (<5s), and high sensitivity (414.8 μA mM(-1)cm(-2)) were achieved at the PtPd/MWCNTs/GC electrode. In addition, the PtPd/MWCNTs nanocatalyst sensor electrode also exhibited excellent reproducibility and stability. Along with these attractive features, the sensor electrode also displayed very high specificity to H(2)O(2) with complete elimination of interference from UA, AA, AAP and glucose.     

The toxic influence of silver and titanium dioxide nanoparticles on cultured ovarian granulosa cells

The application of metal nanoparticles in modern society is growing, but there is insufficient data concerning their influence on reproductive processes and comparison of their biological activity. The present experiments aimed to compare the effects of silver and titanium dioxide nanoparticles (AgNPs and TiO2NPs) on ovarian granulosa cell functions. AgNPs and TiO2NPs were added to culture of porcine granulosa cells at doses 0, 0.01, 0.1, 1 or 10 μg/mL. The mRNAs for proliferating cell nuclear antigen (PCNA), cyclin B1, bax and caspase 3 were quantified by RT-PCR; release of progesterone was analyzed by ELISA. It was shown that both AgNPs and TiO2NPs significantly reduced all the measured parameters. ED₅₀ of the inhibitory influence of AgNPs on the main ovarian cell parameters was higher than ED₅₀ of TiO2NPs. The ability of AgNPs and TiO2NPs to suppress ovarian granulosa cell functions should be taken into account by their application.     

Attachment of gold nanoparticles to glassy carbon electrode and its application for the direct electrochemistry and electrocatalytic behavior of hemoglobin

Gold nanoparticles have been attached onto glassy carbon electrode surface through sulfhydryl-terminated monolayer and characterized by X-ray photoelectron spectroscopy, atomic force microscopy, electrochemical impedance spectroscopy and cyclic voltammetry. The gold nanoparticles-attached glassy carbon electrodes have been applied to the immobilization/adsorption of hemoglobin, with a monolayer surface coverage of about 2.1 x 10(-10) mol cm(-2), and consequently obtained the direct electrochemistry of hemoglobin. Gold nanoparticles, acting as a bridge of electron transfer, can greatly promote the direct electron transfer between hemoglobin and the modified glassy carbon electrode without the aid of any electron mediator. In phosphate buffer solution with pH 6.8, hemoglobin shows a pair of well-defined redox waves with formal potential (E0') of about -0.085 V (versus Ag/AgCl/saturated KCl). The immobilized hemoglobin maintained its biological activity, showing a surface controlled electrode process with the apparent heterogeneous electron transfer rate constant (ks) of 1.05 s(-1) and charge-transfer coefficient (a) of 0.46, and displays the features of a peroxidase in the electrocatalytic reduction of hydrogen peroxide. A potential application of the hemoglobin-immobilized gold nanoparticles modified glassy carbon electrode as a biosensor to monitor hydrogen peroxide has been investigated. The steady-state current response increases linearly with hydrogen peroxide concentration from 2.0 x 10(-6) to 2.4 x 10(-4) M. The detection limit (3sigma) for hydrogen peroxide is 9.1 x 10(-7) M.     

Palladium nanoparticle/chitosan-grafted graphene nanocomposites for construction of a glucose biosensor

Graphene (GR) was covalently functionalized with chitosan (CS) to improve its biocompatibility and hydrophilicity for the preparation of biosensors. The CS-grafted GR (CS-GR) rendered water-soluble nanocomposites that were readily decorated with palladium nanoparticles (PdNPs) using in situ reduction. Results with TEM, SEM, FTIR, Raman and XRD revealed that CS was successfully grafted without destroying the structure of GR, and PdNPs were densely decorated on CS-GR sheets with no aggregation occurring. A novel glucose biosensor was then developed through covalently immobilizing glucose oxidase (GOD) on a glassy carbon electrode modified with the PdNPs/CS-GR nanocomposite film. Due to synergistic effect of PdNPs and GR, the PdNPs/CS-GR nanocomposite film exhibited excellent electrocatalytical activity toward H(2)O(2) and facilitated high loading of enzymes. The biosensor demonstrated high sensitivity of 31.2 μA mM(-1)cm(-2) for glucose with a wide linear range from 1.0 μM to 1.0mM as well as a low detection limit of 0.2 μM (S/N=3). The low Michaelis-Menten constant (1.2mM) suggested enhanced enzyme affinity to glucose. These results indicated that PdNPs/CS-GR nanocomposites held great potential for construction of a variety of electrochemical biosensors.     

Interactions among nickel,copper, and iron in rats

In two fully-crossed, three-way, two-by-three-by-three, factorially arranged experiments, female weanling rats were fed a basal diet supplemented with iron at 15 and 45 μg/g, nickel at 0, 5, and 50 μg/g, and copper at either 0, 0.5, and 5 μ/g (Expt. 1) or 0, 0.25, and 12 μg/g (Expt. 2) A gram of basal diet contained in Expt. 1 approximately 16 ng of nickel, 2.3 μg of iron, and 0.47 μg of copper; and in Expt. 2, 20 ng of nickel, 1.3 μg of iron, and 0.39 μg of copper. Expt. 1 was terminated at 11 weeks, and Expt. 2 at 8 weeks because, at those times, some rats fed no supplemental copper and the high level of nickel began to lose weight, or die from heart rupture. The findings demonstrated that relationships are complex among nickel, copper, and iron. Nickel interacted with copper and this interaction was influenced by dietary iron. Signs of copper deficiency were more severe when nickel was supplemented to the diet provided that copper deprivation was neither very severe nor mild. Iron deprivation apparently enhanced the antagonism by exacerbating copper deficiency. Signs of copper deficiency that were made more severe by nickel supplementation were depressed weight gain (Expt. 2), hematocrit (Expt. 1), hemoglobin, and plasma alkaline phosphatase activity; and elevated ratios of heart wt/body wt, kidney wt/body wt, and liver wt/body wt. Because nickel and copper have similar physical and chemical properties, the interactions between those two elements were probably the result, of isomorphous replacement of copper by nickel at various functional sites that interfered with some biological processes.     

Aptamer-based PDMS-gold nanoparticle composite as a platform for visual detection of biomolecules with silver enhancement

A sensitive colorimetric detection for biomolecules based on aptamer was described. Poly(dimethylsiloxane) (PDMS)-gold nanoparticles (AuNPs) composite film was used as a platform for immobilizing anti-target aptamer. PDMS-AuNPs composite film only covered with aptamer showed high inhibiting ability towards silver reduction, after target molecules were conjugated on the modified surface, the catalytic efficiency of AuNPs for silver reduction was increased. In this system, the darkness density of silver enhancement was applied for target quantitative measurement. Lysozyme and adenosine 5'-triphosphate (ATP) were tested as the models, quantitative measurements with imaging software or semiquantitative measurements with naked eyes were carried out in the range of 1×10(-2)-1 μg/mL and 1×10(-4)-1×10(3) μg/mL, the volume of reagent using in each assay is 15 μL or less. We speculated that aptamer-target conjugates' inhibition ability for AuNPs' catalytic efficiency toward silver reduction might come from charge and spatial effects. This study can offer a completely novel and relatively general approach for colorimetrical aptamer sensors with good analytical properties and potential applications. The sensor could be coupled with digital transmission of images for remote monitoring system in diagnosis, food control, and environmental analysis.     

Single-layer CVD-grown graphene decorated with metal nanoparticles as a promising biosensing platform

A new approach to the development of a single-layer graphene sensor decorated with metal nanoparticles is presented. Chemical vapor deposition is used to grow single layer graphene on copper. Decoration of the single-layer graphene is achieved by electroless deposition of Au nanoparticles using the copper substrate as a source of electrons. Transfer of the decorated single-layer graphene on glassy carbon electrodes offers a sensitive platform for biosensor development. As a proof of concept, 10 units of glucose oxidase were deposited on the surface in a Nafion matrix to stabilize the enzyme as well as to prevent interference from ascorbic acid and uric acid. Amperometric linear response calibration in the μmoll(-1) is obtained. The presented methodology enables highly sensitive platforms for biosensor development, providing a scalable roll-to-roll production with a much more reproducible scheme when compared to the graphene biosensors reported previously based on drop-cast of multi-layer graphene suspensions.     

Cytotoxicity and apoptotic effects of nickel oxide nanoparticles in cultured HeLa cells

The aim of this study was to observe the cytotoxicity and apoptotic effects of nickel oxide nanoparticles on human cervix epithelioid carcinoma cell line (HeLa). Nickel oxide precursors were synthesized by an nickel sulphate-excess urea reaction in boiling aqueous solution. The synthesized NiO nanoparticles (<200 nm) were investigated by X-ray diffraction analysis and transmission electron microscopy techniques. For cytotoxicity experiments, HeLa cells were incubated in 50-500 μg/mL NiO for 2, 6, 12 and 16 hours. The viable cells were counted with a haemacytometer using light microscopy. The cytotoxicity was observed low in 50-200 μg/mL concentration for 16 h, but high in 400-500 μg/mL concentration for 2-6 h. HeLa cells' cytoplasm membrane was lysed and detached from the well surface in 400 μg/mL concentration NiO nanoparticles. Double staining and M30 immunostaining were performed to quantify the number of apoptotic cells in culture on the basis of apoptotic cell nuclei scores. The apoptotic effect was observed 20% for 16 h incubation.     

Controlled biosynthesis of AgCl nanoparticles by a thermotolerant <Emphasis Type="Italic">Aspergillus terreus</Emphasis> in the L-Tryptophan supplemented media: Characterization and antimicrobial activity

A simple and green method was developed for the extracellular biosynthesis of silver chloride nanoparticles, free from silver nanoparticles, using cell-free filtrate of a thermotolerant fungal strain Aspergillus terreus 8. The synthesized silver chloride nanoparticles exhibited characteristic absorption maximum at 275 nm. As-fabricated AgCl-NPs were characterized by UV-vis spectroscopy, XRD, SEM-EDX, and FT-IR. The biosynthesized silver chloride nanoparticles exhibited strong antimicrobial activity towards pathogenic microorganisms such as Fusarium oxysporum f. sp. vasinfectum and Verticillium dahliae. The synthesized silver chloride nanoparticles can be exploited as a promising new biocide bionanocomposite against pathogenic microorganisms.