Signal sequence processing is required for the assembly of LamB trimers in the outer membrane of Escherichia coli.

Proteins destined for either the periplasm or the outer membrane of Escherichia coli are translocated from the cytoplasm by a common mechanism. It is generally assumed that outer membrane proteins, such as LamB (maltoporin or lambda receptor), which are rich in beta-structure, contain additional targeting information that directs proper membrane insertion. During transit to the outer membrane, these proteins may pass, in soluble form, through the periplasm or remain membrane associated and reach their final destination via sites of inner membrane-outer membrane contact (zones of adhesion). We report lamB mutations that slow signal sequence cleavage, delay release of the protein from the inner membrane, and interfere with maltoporin biogenesis. This result is most easily explained by proposing a soluble, periplasmic LamB assembly intermediate. Additionally, we found that such lamB mutations confer several novel phenotypes consistent with an abortive attempt by the cell to target these tethered LamB molecules. These phenotypes may allow isolation of mutants in which the process of outer membrane protein targeting is altered.     

Permissive sites and topology of an outer membrane protein with a reporter epitope.

We are developing a genetic approach to study with a single antibody the folding and topology of LamB, an integral outer membrane protein from Escherichia coli K-12. This approach consists of inserting the same reporter foreign antigenic determinant (the C3 epitope from poliovirus) at different sites of LamB so that the resulting hybrid proteins have essentially kept the in vivo biological properties of LamB and therefore its cellular location and structure; the corresponding sites are called permissive sites. A specific monoclonal antibody can then be used to examine the position of the reporter epitope with respect to the protein and the membrane. We present an improved and efficient procedure that led us to identify eight new permissive sites in LamB. These sites appear to be distributed on both sides of the membrane. At one of them (after residue 253), the C3 epitope was detected on intact bacteria, providing the first direct argument for exposure of the corresponding LamB region at the cell surface. At this site as well as at four others (after residues 183, 219, 236, and 352), the C3 epitope could be detected with the C3 monoclonal antibody at the surface of the extracted trimeric LamB-C3 hybrid proteins. We provide a number of convergent arguments showing that the hybrid proteins are not strongly distorted with respect to the wild-type protein so that the conclusions drawn are also valid for this protein. These conclusions are essentially in agreement with the proposed folding model for the LamB protein. They agree, in particular, with the idea that regions 183 and 352 are exposed to the periplasm. In addition, they suggest that region 236 is buried at the external face of the outer membrane and that region 219 is exposed to the periplasm. Including the 3 sites previously determined, 11 permissive sites are now available in LamB, including 3 at the cell surface and most probably at least 3 in the periplasm. We discuss the nature of such sites, the generalization of this approach to other proteins, and possible applications.     

Translational control of exported proteins in Escherichia coli

We recently described the suppression of export of a class of periplasmic proteins of Escherichia coli caused by overproduction of a C-terminal truncated periplasmic enzyme (GlpQ'). This truncated protein was not released into the periplasm but remained attached to the inner membrane and was accessible from the periplasm. The presence of GlpQ' in the membrane strongly reduced the appearance in the periplasm of some periplasmic proteins, including the maltose-binding protein (MBP), but did not affect outer membrane proteins, including the lambda receptor (LamB) (R. Hengge and W. Boos, J. Bacteriol., 162:972-978, 1985). To investigate this phenomenon further we examined the fate of MBP in comparison with the outer membrane protein LamB. We found that not only localization but also synthesis of MBP was impaired, indicating a coupling of translation and export. Synthesis and secretion of LamB were not affected. The possibility that this influence was exerted via the level of cyclic AMP could be excluded. Synthesis of MBP with altered signal sequences was also reduced, demonstrating that export-defective MBP which ultimately remains in the cytoplasm abortively enters the export pathway. When GlpQ' was expressed in a secA51(Ts) strain, the inhibition of MBP synthesis caused by GlpQ' was dominant over the precursor accumulation usually caused by secA51(Ts) at 41 degrees C. Therefore, GlpQ' acts before or at the level of recognition by SecA. For LamB the usual secA51(Ts) phenotype was observed. We propose a mechanism by which GlpQ' blocks an yet unknown membrane protein, the function of which is to couple translation and export of a subclass of periplasmic proteins.     

Assembly of TolC, a structurally unique and multifunctional outer membrane protein of Escherichia coli K-12

TolC is a multifunctional outer membrane protein of Escherichia coli that folds into a novel alpha-beta-barrel conformation absent in the other model outer membrane proteins used in assembly studies. The data presented in this work show that the unique folded structure of TolC reflects a unique assembly pathway. During its assembly, the newly translocated nascent TolC monomers are released in the periplasm. Maturation of these nascent monomers, and possibly their oligomerization, in the periplasm precedes their insertion in the outer membrane. The completion of the assembly process is signaled by the development of a characteristic proteinase K-resistant fragment generated by cleavage at a single, periplasmically exposed, protease-sensitive site of the membrane-anchored trimer. None of the assembly steps of TolC is affected by known folding factors, such as SurA, Skp, and lipopolysaccharide, which have profound effects on the assembly of other model trimeric outer membrane proteins. Two assembly-defective TolC mutants were isolated and characterized. One of the mutants (TolC(I106N)) was defective in the folding of nascent monomers, while the other (TolC(S350F)) was impaired in steps involving trimerization and membrane insertion of folded monomers.     

Subcellular localization of seven VirB proteins of Agrobacterium tumefaciens: implications for the formation of a T-DNA transport structure.

Plant cell transformation by Agrobacterium tumefaciens involves the transfer of a single-stranded DNA-protein complex (T-complex) from the bacterium to the plant cell. One of the least understood and important aspects of this process is how the T-complex exits the bacterium. The eleven virB gene products have been proposed to specify the DNA export channel on the basis of their predicted hydrophobicity. To determine the cellular localization of the VirB proteins, two different cell fractionation methods were employed to separate inner and outer membranes. Seven VirB-specific antibodies were used on Western blots (immunoblots) to detect the proteins in the inner and outer membranes and soluble (containing cytoplasm and periplasm) fractions. VirB5 was in both the inner membrane and cytoplasm. Six of the VirB proteins were detected in the membrane fractions only. Three of these, VirB8, VirB9, and VirB10, were present in both inner and outer membrane fractions regardless of the fractionation method used. Three additional VirB proteins, VirB1, VirB4, and VirB11, were found mainly in the inner membrane fraction by one method and were found in both inner and outer membrane fractions by a second method. These results confirm the membrane localization of seven VirB proteins and strengthen the hypothesis that VirB proteins are involved in the formation of a T-DNA export channel or gate. That most of the VirB proteins analyzed are found in both inner and outer membrane fractions suggest that they form a complex pore structure that spans both membranes, and their relative amounts in the two membrane fractions reflect their differential sensitivity to the experimental conditions.     

Insertion of a MalE β-Galactosidase Fusion Protein into the Envelope of Escherichia coli Disrupts Biogenesis of Outer Membrane Proteins and Processing of Inner Membrane Proteins

The synthesis of a membrane-bound MalE β-galactosidase hybrid protein, when induced by growth of Escherichia coli on maltose, leads to inhibition of cell division and eventually a reduced rate of mass increase. In addition, the relative rate of synthesis of outer membrane proteins, but not that of inner membrane proteins, was reduced by about 50%. Kinetic experiments demonstrated that this reduction coincided with the period of maximum synthesis of the hybrid protein (and another maltose-inducible protein, LamB). The accumulation of this abnormal protein in the envelope therefore appeared specifically to inhibit the synthesis, the assembly of outer membrane proteins, or both, indicating that the hybrid protein blocks some export site or causes the sequestration of some limiting factor(s) involved in the export process. Since the MalE protein is normally located in the periplasm, the results also suggest that the synthesis of periplasmic and outer membrane proteins may involve some steps in common. The reduced rate of synthesis of outer membrane proteins was also accompanied by the accumulation in the envelope of at least one outer membrane protein and at least two inner membrane proteins as higher-molecular-weight forms, indicating that processing (removal of the N-terminal signal sequence) was also disrupted by the presence of the hybrid protein. These results may indicate that the assembly of these membrane proteins is blocked at a relatively late step rather than at the level of primary recognition of some site by the signal sequence. In addition, the results suggest that some step common to the biogenesis of quite different kinds of envelope protein is blocked by the presence of the hybrid protein.     

SurA Is Involved in the Targeting to the Outer Membrane of a Tat Signal Sequence-Anchored Protein

The twin arginine translocation (Tat) pathway exports folded proteins from the cytoplasm to the periplasm of bacteria. The targeting of the exported proteins to the Tat pathway relies on a specific amino-terminal signal sequence, which is cleaved after exportation. In the phytopathogen Dickeya dadantii, the pectin lyase homologue PnlH is exported by the Tat pathway without cleavage of its signal sequence, which anchors PnlH into the outer membrane. In proteobacteria, the vast majority of outer membrane proteins consists of β-barrel proteins and lipoproteins. Thus, PnlH represents a new kind of outer membrane protein. In Escherichia coli, periplasmic chaperones SurA, Skp, and DegP work together with the β-barrel assembly machinery (Bam) to target and insert β-barrel proteins into the outer membrane. In this work, we showed that SurA is required for an efficient targeting of PnlH to the outer membrane. Moreover, we were able to detect an in vitro interaction between SurA and the PnlH signal sequence. Since the PnlH signal sequence contains a highly hydrophobic region, we propose that SurA protects it from the hydrophobic periplasm during targeting of PnlH to the outer membrane. We also studied the nature of the information carried by the PnlH signal sequence responsible for its targeting to the outer membrane after exportation by the Tat system.     

Components of the Salmonella flagellar export apparatus and classification of export substrates

Until now, identification of components of the flagellar protein export apparatus has been indirect. We have now identified these components directly by establishing whether mutants defective in putative export components could translocate export substrates across the cytoplasmic membrane into the periplasmic space. Hook-type proteins could be exported to the periplasm of rod mutants, indicating that rod protein export does not have to precede hook-type protein export and therefore that both types of proteins belong to a single export class, the rod/hook-type class, which is distinct from the filament-type class. Hook-capping protein (FlgD) and hook protein (FlgE) required FlhA, FlhB, FliH, FliI, FliO, FliP, FliQ, and FliR for their export to the periplasm. In the case of flagellin as an export substrate, because of the phenomenon of hook-to-filament switching of export specificity, it was necessary to use temperature-sensitive mutants and establish whether flagellin could be exported to the cell exterior following a shift from the permissive to the restrictive temperature. Again, FlhA, FlhB, FliH, FliI, and FliO were required for its export. No suitable temperature-sensitive fliQ or fliR mutants were available. FliP appeared not to be required for flagellin export, but we suspect that the temperature-sensitive FliP protein continued to function at the restrictive temperature if incorporated at the permissive temperature. Thus, we conclude that these eight proteins are general components of the flagellar export pathway. FliJ was necessary for export of hook-type proteins (FlgD and FlgE); we were unable to test whether FliJ is needed for export of filament-type proteins. We suspect that FliJ may be a cytoplasmic chaperone for the hook-type proteins and possibly also for FliE and the rod proteins. FlgJ was not required for the export of the hook-type proteins; again, because of lack of a suitable temperature-sensitive mutant, we were unable to test whether it was required for export of filament-type proteins. Finally, it was established that there is an interaction between the processes of outer ring assembly and of penetration of the outer membrane by the rod and nascent hook, the latter process being of course necessary for passage of export substrates into the external medium. During the brief transition stage from completion of rod assembly and initiation of hook assembly, the L ring and perhaps the capping protein FlgD can be regarded as bona fide export components, with the L ring being in a formal sense the equivalent of the outer membrane secretin structure of type III virulence factor export systems.     

Extracellular accumulation of recombinant protein by Escherichia coli in a defined medium

Extracellular accumulation of recombinant proteins in the culture medium of Escherichia coli is desirable but difficult to obtain. The inner or cytoplasmic membrane and the outer membrane of E. coli are two barriers for releasing recombinant proteins expressed in the cytoplasm into the culture medium. Even if recombinant proteins have been exported into the periplasm, a space between the outer membrane and the inner membrane, the outer membrane remains the last barrier for their extracellular release. However, when E. coli was cultured in a particular defined medium, recombinant proteins exported into the periplasm could diffuse into the culture medium automatically. If a nonionic detergent, Triton X-100, was added in the medium, recombinant proteins expressed in the cytoplasm could also be released into the culture medium. It was then that extracellular accumulation of recombinant proteins could be obtained by exporting them into the periplasm or releasing them from the cytoplasm with Triton X-100 addition. The tactics described herein provided simple and valuable methods for achieving extracellular production of recombinant proteins in E. coli.     

Transport of outer membrane lipids in mycobacteria

The complex organization of the mycobacterial cell wall poses unique challenges for the study of its assembly. Although mycobacteria are classified evolutionarily as Gram-positive bacteria, their cell wall architecture more closely resembles that of Gram-negative organisms. They possess not only an inner cytoplasmic membrane, but also a bilayer outer membrane that encloses an aqueous periplasm and includes diverse lipids that are required for the survival and virulence of pathogenic species. Questions surrounding how mycobacterial outer membrane lipids are transported from where they are made in the cytoplasm to where they function at the cell exterior are thus similar, and similarly compelling, to those that have driven the study of Gram-negative outer membrane transport pathways. However, little is understood about these processes in mycobacteria. Here we contextualize these questions by comparing our current knowledge of mycobacteria with better-defined systems in other organisms. Based on this analysis, we propose possible models and highlight continuing challenges to improving our understanding of outer membrane assembly in these medically and environmentally important bacteria. This article is part of a Special Issue entitled: Bacterial Lipids edited by Russell E. Bishop.     

Imp/OstA is required for cell envelope biogenesis in Escherichia coli

In Gram-negative bacteria, all components of the outer membrane are synthesized in the cytoplasm or the cytoplasmic leaflet of the inner membrane and must thus traverse the inner membrane and the periplasm on the way to their final destination. In this study, we show Imp/OstA to have characteristics typical for proteins involved in envelope biogenesis. Imp is essential and forms a high-molecular-weight disulphide-bonded complex in the outer membrane. Upon depletion of Imp, lipids and outer membrane proteins appear in a novel membrane fraction with higher density than the outer membrane. We propose Imp to be part of a targeting/usher system for components of the outer membrane.     

Structure and function of BamE within the outer membrane and the β-barrel assembly machine

Insertion of folded proteins into the outer membrane of Gram-negative bacteria is mediated by the essential β-barrel assembly machine (Bam). Here, we report the native structure and mechanism of a core component of this complex, BamE, and show that it is exclusively monomeric in its native environment of the periplasm, but is able to adopt a distinct dimeric conformation in the cytoplasm. BamE is shown to bind specifically to phosphatidylglycerol, and comprehensive mutagenesis and interaction studies have mapped key determinants for complex binding, outer membrane integrity and cell viability, as well as revealing the role of BamE within the Bam complex.     

Differential effects of yfgL mutation on Escherichia coli outer membrane proteins and lipopolysaccharide

YfgL together with NlpB, YfiO, and YaeT form a protein complex to facilitate the insertion of proteins into the outer membrane of Escherichia coli. Without YfgL, the levels of OmpA, OmpF, and LamB are significantly reduced, while OmpC levels are slightly reduced. In contrast, the level of TolC significantly increases in a yfgL mutant. When cells are depleted of YaeT or YfiO, levels of all outer membrane proteins examined, including OmpC and TolC, are severely reduced. Thus, while the assembly pathways of various nonlipoprotein outer membrane proteins may vary through the step involving YfgL, all assembly pathways in Escherichia coli converge at the step involving the YaeT/YfiO complex. The negative effect of yfgL mutation on outer membrane proteins may in part be due to elevated sigma E activity, which has been shown to downregulate the synthesis of various outer membrane proteins while upregulating the synthesis of periplasmic chaperones, foldases, and lipopolysaccharide. The data presented here suggest that the yfgL effect on outer membrane proteins also stems from a defective assembly apparatus, leading to aberrant outer membrane protein assembly, except for TolC, which assembles independent of YfgL. Consistent with this view, the simultaneous absence of YfgL and the major periplasmic protease DegP confers a synthetic lethal phenotype, presumably due to the toxic accumulation of unfolded outer membrane proteins. The results support the hypothesis that TolC and major outer membrane proteins compete for the YaeT/YfiO complex, since mutations that adversely affect synthesis or assembly of major outer membrane proteins lead to elevated TolC levels.     

Antibodies against synthetic peptides and the topology of LamB, an outer membrane protein from Escherichia coli K12

LamB, an outer membrane protein from Escherichia coli K12, is involved in the transport of maltose and maltodextrins across the outer membrane and constitutes a receptor for a number of bacteriophages. A recent folding model proposes that LamB spans the outer membrane through a number of transmembranous segments separated by regions exposed either to the cell exterior or to the periplasm. This model is essentially based on predictions of structure and genetic arguments relying on the hypothesis that the mutations studied did not alter the folding of the protein. In order to obtain direct evidence with the unaltered protein, we elicited polyclonal antibodies against synthetic peptides corresponding to several LamB sequences. We chose four regions. Three of them [aa 147-161 (peptide 2), aa 371-385 (peptide 3), and aa 399-413 (peptide 4)] are predicted to face the outside of the cell, and the fourth (aa 19-33 (peptide 1)] is predicted to be periplasmic. By immunoblotting against extracts of various mutants, these antibodies were shown to be specific for LamB and targeted to the selected regions. In some cases, the recognition sites for antibodies were narrowed down to parts of a region. In vivo, on intact cells, anti-peptides 2, 3, and 4 reacted with LamB in an ELISA; this confirmed that regions of peptide 2 and 3 are located, at least in part, at the cell exterior and provided the first proof for a similar, situation of the region of peptide 4. Under the same conditions, anti-peptide 1 did not react with LamB.(ABSTRACT TRUNCATED AT 250 WORDS)     

Facilitated diffusion of p-nitrophenyl-alpha-D-maltohexaoside through the outer membrane of Escherichia coli. Characterization of LamB as a specific and saturable channel for maltooligosaccharides

LamB, an outer membrane protein of Escherichia coli, is a component of the maltose-maltooligosaccharide transport system. We used p-nitrophenyl-alpha-D-maltohexaoside, a chromogenic analog of maltohexaose, and a periplasmic amylase that hydrolyzes this compound to study the LamB-mediated diffusion of p-nitrophenyl-alpha-D-maltohexaoside into the periplasm. Using this approach, we were able to characterize LamB in vivo as a saturable channel for maltooligosaccharides. Permeation through LamB follows Michaelis-Menten kinetics, with a Km of 0.13 mM and a Vmax of 3.3 nmol/min/10(9) cells. Previous studies suggested that maltose-binding protein increases the rate of maltooligosaccharide diffusion through LamB. We show here that, at least in strains that are unable to transport maltooligosaccharides into the cytoplasm, maltose-binding protein does not influence the rate of substrate diffusion. The periplasmic amylase had been previously described as being of the alpha-type. We have now purified this protein and analyzed its mode of action using chromogenic maltooligosaccharides of varying length. Analysis of the hydrolytic products revealed that the enzyme recognizes its substrate from the nonreducing that the enzyme recognizes its substrate from the nonreducing end and preferentially liberates maltohexaose, in contrast to the behavior of classical alpha-amylases that are endohydrolases. Using p-nitrophenyl-alpha-D-maltohexaoside as a substrate, we determined a Km of 3 microM and a Vmax of 0.14 mumol/min/mg of protein.     

Molecular aspects of complement-mediated bacterial killing. Periplasmic conversion of C9 from a protoxin to a toxin

As part of the membrane attack complex complement protein C9 is responsible for direct killing of bacteria. Here we show that in the periplasmic space of an Escherichia coli cell C9 is converted from a protoxin to a toxin by periplasmic conditions missing in spheroplasts. This conversion is independent of the pathway by which C9 enters the periplasm. Both, C9 shocked into the periplasm and plasmid-expressed C9 targeted to the periplasm via a signal sequence are toxic. Toxicity requires disulfide-linked C9 because export into the periplasm of cells defective in disulfide bond synthesis (dsbA and dsbB mutants) is not toxic unless N-acetylcysteine is added externally to promote cystines. A N-terminal fragment, C9[1-144], is not toxic nor is cytoplasmically expressed C9, even in trxB mutants that are able to form disulfide bonds in the cytoplasm. Importantly, expression of full-length C9 in complement-resistant cells has no effect on their viability. Expression and translocation into the periplasm may provide a novel model to identify molecular mechanisms of other bactericidal disulfide-linked proteins and to investigate the nature of bacterial complement resistance.     

Folding of a bacterial outer membrane protein during passage through the periplasm.

The transport of bacterial outer membrane proteins to their destination might be either a one-step process via the contact zones between the inner and outer membrane or a two-step process, implicating a periplasmic intermediate that inserts into the membrane. Furthermore, folding might precede insertion or vice versa. To address these questions, we have made use of the known 3D-structure of the trimeric porin PhoE of Escherichia coli to engineer intramolecular disulfide bridges into this protein at positions that are not exposed to the periplasm once the protein is correctly assembled. The mutations did not interfere with the biogenesis of the protein, and disulfide bond formation appeared to be dependent on the periplasmic enzyme DsbA, which catalyzes disulfide bond formation in the periplasm. This proves that the protein passes through the periplasm on its way to the outer membrane. Furthermore, since the disulfide bonds create elements of tertiary structure within the mutant proteins, it appears that these proteins are at least partially folded before they insert into the outer membrane.     

Bacterial Phage Receptors, Versatile Tools for Display of Polypeptides on the Cell Surface

Four outer membrane proteins of Escherichia coli were examined for their capabilities and limitations in displaying heterologous peptide inserts on the bacterial cell surface. The T7 tag or multiple copies of the myc epitope were inserted into loops 4 and 5 of the ferrichrome and phage T5 receptor FhuA. Fluorescence-activated cell sorting analysis showed that peptides of up to 250 amino acids were efficiently displayed on the surface of E. coli as inserts within FhuA. Strains expressing FhuA fusion proteins behaved similarly to those expressing wild-type FhuA, as judged by phage infection and colicin sensitivity. The vitamin B(12) and phage BF23 receptor BtuB could display peptide inserts of at least 86 amino acids containing the T7 tag. In contrast, the receptors of the phages K3 and lambda, OmpA and LamB, accepted only insertions in their respective loop 4 of up to 40 amino acids containing the T7 tag. The insertion of larger fragments resulted in inefficient transport and/or assembly of OmpA and LamB fusion proteins into the outer membrane. Cells displaying a foreign peptide fused to any one of these outer membrane proteins were almost completely recovered by magnetic cell sorting from a large pool of cells expressing the relevant wild-type platform protein only. Thus, this approach offers a fast and simple screening procedure for cells displaying heterologous polypeptides. The combination of FhuA, along with with BtuB and LamB, should provide a comprehensive tool for displaying complex peptide libraries of various insert sizes on the surface of E. coli for diverse applications.     

A genetic approach for analyzing the pathway of LamB assembly into the outer membrane of Escherichia coli

Results presented in this study demonstrate that a mutation which inserts an additional tyrosine between the 2 tyrosines at residues 118 and 119 of mature LamB protein results in a temperature-dependent assembly defect. This defect leads to the accumulation of an intermediate at the restrictive temperature that is most likely an assembly-defective monomer. These monomers are rapidly degraded in the wild type (htrA+) strain, and the biphasic kinetics of this degradation indicate that the mutation affects the assembly process and not the final product, i.e. stable trimers. In addition, our data show that the temperature-dependent assembly defect in the mutant strain is reversible, and therefore the accumulated monomers represent a true assembly intermediate. Fractionation studies show that the monomers, which can be accumulated in htrA (degP) mutants at the restrictive temperature, are associated with the outer membrane, indicating that trimerization of LamB is not a prerequisite for localization.     

Combinatorial mutagenesis of the lamB gene: residues 41 through 43, which are conserved in Escherichia coli outer membrane proteins, are informationally important in maltoporin structure and function.

A new strategy for combinatorial mutagenesis was developed and applied to residues 40 through 60 of LamB protein (maltoporin), with the aim of identifying amino acids important for LamB structure and function. The strategy involved a template containing a stop codon in the target sequence and a pool of random degenerate oligonucleotides covering the region. In vitro mutagenesis followed by selection for function (Dex+, ability to utilize dextrins) corrected the nonsense mutation and simultaneously forced incorporation of a random mutation(s) within the region. The relative importance of each residue within the target was indicated by the frequency and nature of neutral and deleterious mutations recovered at each position. Residues 41 through 43 in LamB accepted few neutral substitutions, whereas residues 55 through 57 were highly flexible in this regard. Consistent with this finding was that the majority of defective mutants were altered at residues 41 to 43. Characterization of these mutants indicated that the nature of residues 41 to 43 influenced the amount of stable protein in the outer membrane. These results, as well as the conserved nature of this stretch of residues among outer membrane proteins, suggest that residues 41 to 43 of LamB play an important role in the process of outer membrane localization.