Removal of bacteria from water by adhesion to cross-linked poly(vinylpyridinium halide).

Cross-linked poly(vinylpyridinium halide) was found to have a novel and remarkable ability to remove bacteria from water. For example, when 10 g (wet weight) of cross-linked poly(N-benzyl-4-vinylpyridinium bromide) was contacted with 20 ml of suspensions of Escherichia coli (9.7 X 10(4) to 9.7 X 10(7)/ml), Salmonella typhimurium (8.0 X 10(6) to 1.1 X 10(7)/ml), Streptococcus faecalis (5.0 X 10(7)/ml), Staphylococcus aureus (8.1 X 10(7)/ml), and Pseudomonas aeruginosa (3.2 X 10(5)/ml) under stirring in sterilized physiological saline at 37 degrees C, 99% of the viable cells of these bacteria were removed in 2 to 6 h. When suspensions of these bacteria (10(5) to 10(8) cells per ml) were passed through a column (20 mm by 100 cm) of cross-linked poly(N-benzyl-4-vinylpyridinium bromide) at 37 degrees C with a flow rate of 0.8 to 1.4 bed volumes per h, 97 to 100% of the viable cells were eliminated from the suspensions during the treatment. Mechanistic studies demonstrated that cross-linked poly(vinylpyridinium halide) irreversibly captured these bacteria alive during the treatment. That is, total organic carbon was removed during the treatment, and the bacteria which adhered to the resin proliferated on the bacterial medium. The adhesion capacity was estimated to be 10(10) cells per g (dry weight). Total organic carbon was also removed even when the bacteria were killed by heat treatment before the column studies.     

New method of immobilization of microbial cells by capture on the surface of insoluble pyridinium-type resin

A new method for the immobilization of microbial cells has been developed. Whole cells of Escherichia coli with aspartase activity were immobilized by capture on the surface of cross-linked poly(N-benzyl-4-vinylpyridinium bromide) containing styrene (BVPS resin), an insoluble pyridinium-type resin. When a suspension of the bacterial cells in buffer solution was passed through a glass column containing beads of BVPS resin, the cells were captured on the resin surface and formed an immobilized cell system. A fixed-bed column reactor containing 300 mg of the bacterial cells immobilized by capture on 10 g of BVPS resin beads was used for the preparation of L-aspartic acid from ammonium fumarate. Continuous operation of tne bioreactor produced L-aspartic acid in a quantitative yield when the influent substrate concentration was 0.1M and the flow rate was 0.41-0.83 bed volumes per hour at pH 7.4-7.7 at 30 degrees C.     

Immunosensor for the differentiation and detection of Salmonella species based on a quartz crystal microbalance

Immunosensors based on the microgravimetric quartz crystal microbalance (QCM) technique have been developed for the detection of Salmonella species from serogroups A, B and D. Salmonella serogroup-specific murine monoclonal antibodies, respectively, raised against these serogroups were immobilized onto the silver electrodes of piezoelectric (PZ) crystals by cross-linkage via glutaraldehyde (GA) to the electrode surfaces pre-coated with thin polyethyleneimine (PEI) layer. The specific immunosensors developed gave responses in linear ranges from 10(5) to 5x10(8) cells per ml with no significant interference from other strains of Salmonella and Escherichia coli up to 10(8) cells per ml. They showed good repeatability and excellent linear range, achieving detection limits down to 10(4) cells per ml with ability to distinguish different strains of Salmonella. These biosensors exhibited an exquisite specificity evidenced by their ability to discriminate antigens, the structures of which differ only by the isomeric form of di-deoxyhexose. The antibody-modified crystals showed no loss in activity over 4 days under storage at 4 degrees C.     

Potential of an antibacterial ultraviolet-irradiated nylon film

The antibacterial effectiveness of an ultraviolet-irradiated nylon 6, 6 film was investigated for potential use as a food-packaging material to reduce the surface microbial contamination of foods. The film-surface analyses showed that UV irradiation induced conversion of surface amide groups to amines. Irradiation also increased the dimensional scale of the film surface topography (depth of valleys) approximately 5-fold on the scale of nanometers. The irradiated nylon demonstrated antagonistic activity against Staphylococcus aureus 25923 and Escherichia coli TV1058 with 4.5 and 6 log reductions, respectively, of an initial population of 10(6) cfu mL(-1). The irradiated nylon was ineffective against Pseudomonas fluorescens 13525 and Enterococcus faecalis 19433 under similar conditions. The film demonstrated increased antimicrobial activity against S. aureus 25923 with increasing temperatures up to 45 degrees C, the highest temperature tested. Protein and salt inhibited the antibacterial nature of the irradiated film. Amines in solution (4.31 x 10(-8) M; the calculated equivalent of amines on the film) killed at least 1 x 10(4) cfu mL(-1) E. coli TV1058, and 4. 31 x 10(-7) M amines killed up to 1 x 10(7) cfu mL(-1) E. coli TV1058. The amines in solution required similar exposure time to the bacteria for population reduction as was observed with the irradiated film.     

Rate of plasmid transfer among Escherichia coli strains isolated from natural populations.

The conjugative plasmid R1 was introduced into ten strains of Escherichia coli isolated from natural populations. Spontaneous nalidixic-acid-resistant mutants of the ten strains served as recipients. The ten donor and recipient strains were mated in all combinations and the rate at which R1 transferred between the strains was determined. The rate of transfer ranged from 5.2 x 10(-11)-1.1 x 10(-18) ml per cell h-1, and averaged 1.3 x 10(-15) ml per cell h-1. The results of these experiments suggest that the rates of conjugative transfer are far too low for plasmids to be maintained as parasites in their host populations. Infectious transfer is insufficient; plasmids must confer a selective advantage to their host to be maintained.     

Interaction of Bdellovibrio bacteriovorus and Host Bacteria II. Intracellular Growth and Development of Bdellovibrio bacteriovorus in Liquid Cultures

The intracellular life cycle of Bdellovibrio bacteriovorus 109 growing on Escherichia coli in a dilute nutrient medium exhibits a period of constant infective titer while the parasite grows and elongates inside the host cell. This period is terminated after 2 to 4 hr, and the number of the plaque-forming units in the culture rises rapidly to as much as six times the initial titer. The growth pattern of Bdellovibrio is similar with actively growing or resting host cells, or with host cells killed by ultraviolet irradiation or by heating at 70 C. The yield of B. bacteriovorus strain 109 in two-membered cultures with E. coli B depends on the host concentration and may reach 7.5 x 10(10) cells per ml. Penicillin, which has no effect on the attachment and penetration of Bdellovibrio, inhibits its multiplication.     

Disinfection of drinking water by using a novel electrochemical reactor employing carbon-cloth electrodes.

A novel electrochemical reactor employing carbon-cloth electrodes was constructed for disinfection of drinking water. Escherichia coli K-12 (10(2) cells per cm3) was sterilized when a cell suspension was passed through the reactor at a dilution rate of 6.0 h-1, and a potential of 0.7 V versus a saturated calomel electrode was applied to an electrode. The survival ratio increased with increasing dilution rate but was less than 0.1% at dilution rates of less than 6.0 h-1. Although the survival ratio increased with increasing cell concentration above 10(3) cells per cm3, the disinfection rate also increased. The disinfection rate was 6.0 x 10(2) cells per cm3 per h at a cell concentration of 10(2) cells per cm3. Continuous sterilization of E. coli cells was carried out for 24 h. Sterilization is based on an electrochemical reaction between the electrode and the cell which is mediated by intracellular coenzyme A. Sterilization of drinking water by using this reactor was successfully performed, demonstrating the potential of such a reactor for clean and efficient water purification.     

Expression of the p20 gene from Bacillus thuringiensis H-14 increases Cry11A toxin production and enhances mosquito-larvicidal activity in recombinant gram-negative bacteria.

Experimental analyses with recombinant Escherichia coli and Pseudomonas putida transformed with plasmids bearing genes coding for the Cry11A toxin and P20 protein from Bacillus thuringiensis H-14 showed that cells producing both proteins were more toxic when fed to third-instar Aedes aegypti larvae than were cells expressing cry11A alone; the 50% lethal concentrations were in the range of 10(4) to 10(5) cells/ml. Western blots revealed a higher production of Cry11A when the p20 gene was coexpressed. Cry11A was detected primarily in insoluble form in recombinant cells. Cry11A was not detected in P. putida when P20 was not coproduced, and these recombinants were not toxic to larvae, whereas P. putida recombinants producing both proteins were toxic at concentrations similar to those for E. coli. A coelution experiment was conducted, in which a p20 gene construct producing the P20 protein with an extension of six histidines on the C terminus was mixed with the Cry11A protein. The results showed that Cry11A bound to the P20(His(6)) on a nickel chelating column, whereas Cry11A produced without the P20(His(6)) protein was washed through the column, thus indicating that Cry11A and P20 physically interact. Thus, P20 protein either stabilizes Cry11A or helps it attain the folding important for its toxic activity.     

Disinfection of drinking water by using a novel electrochemical reactor employing carbon-cloth electrodes.

A novel electrochemical reactor employing carbon-cloth electrodes was constructed for disinfection of drinking water. Escherichia coli K-12 (10(2) cells per cm3) was sterilized when a cell suspension was passed through the reactor at a dilution rate of 6.0 h-1, and a potential of 0.7 V versus a saturated calomel electrode was applied to an electrode. The survival ratio increased with increasing dilution rate but was less than 0.1% at dilution rates of less than 6.0 h-1. Although the survival ratio increased with increasing cell concentration above 10(3) cells per cm3, the disinfection rate also increased. The disinfection rate was 6.0 x 10(2) cells per cm3 per h at a cell concentration of 10(2) cells per cm3. Continuous sterilization of E. coli cells was carried out for 24 h. Sterilization is based on an electrochemical reaction between the electrode and the cell which is mediated by intracellular coenzyme A. Sterilization of drinking water by using this reactor was successfully performed, demonstrating the potential of such a reactor for clean and efficient water purification.     

Susceptibility of Agrilus planipennis (Coleoptera: Buprestidae) to Beauveria bassiana and Metarhizium anisopliae

The susceptibility of Agrilus planipennis Fairmaire (Coleoptera: Buprestidae) to selected strains of the entomopathogenic fungi Beauveria bassiana (Balsamo) Vuillemin and Metarhizium anisopliae (Metschnikoff) Sorokin was evaluated through bioassays with direct immersion or foliar exposure under laboratory conditions. Results showed that A. planipennis adults were susceptible to B. bassiana and M. anisoplae. Significant time-mortality response was found for each isolates. Isolate B. bassiana GHA killed A. planipennis adults at a faster rate compared with other isolates tested, with the lowest average time-to-death values. The LC50 values estimated under direct immersion method ranged from 1.7 x 10(5) to 1.9 x 10(7), 3.5 x 10(4) to 5.3 x 10(5), and 4.1 x 10(3) to 2.9 x 10(5) conidia/ml for B. basissiana and from 3.2 x 10(6) to 1.1 x 10(7), 4.5 x 10(3) to 4.5 x 10(5), and 1.4 x 10(2) to 1.2 x 10(5) conidia/ml for M. anisopliae at 4, 5, and 6 d after treatment, respectively. By days 5 and 6, B. bassiana GHA outperformed all other isolates tested except ARSEF 7234, followed by ARSEF 7152, 6393, and 7180. Significant concentration-mortality response was also observed for two B. bassiana GHA formulations, BotaniGard ES and Mycotrol O, and M. anisopliae F52 when insects were treated through foliar exposure. The LC50 values ranged from 114.5 to 309.6, 18.4 to 797.3, and 345.3 to 362.0 conidia/cm2 for BotaniGard, Mycotrol, and M. anisopliae F52, respectively. Based on the results of these bioassays, the efficacy of both B. bassiana GHA formulations and M. anisopliae F52 were similar against adult A. planipennis. The potential use of entomopathogenic fungi for management of A. planipennis in North America is discussed.     

Effect of sodium chloride on transport of bacteria in a saturated aquifer material.

Determinations were made of the influence of NaCl concentration, cell density, and flow velocity on the transport of Pseudomonas sp. strain KL2 through columns of aquifer sand under saturated conditions. A pulse-type boundary condition was used. The experiments were conducted by using 0.3-m-long Plexiglas columns with an internal diameter of 0.05 m. When a 1-h pulse of a 0.01 M NaCl solution containing 10(8) cells per ml was added at a flow rate of 10(-4) m s-1, the bacterial density in the effluent never exceeded 2.2% of the density of cells added, and only 1.5% of the bacteria passed through the aquifer material. In contrast, when the bacteria were applied in distilled water, the relative cell density in the effluent approached 100%, and 60% of the bacteria were transported through the aquifer solids. Under these conditions, the breakthrough of Pseudomonas sp. strain KL2 was slower than chloride. When the flow rate was 2.0 x 10(-4) m s-1, the cell density in the effluent reached 7.3% of that added in 0.01 M NaCl solution, but only 3.9% of the bacteria were transported through the aquifer particles. On the other hand, the density in the effluent approached 100% of that added in deionized water, and 77% of the added bacteria were recovered. When the density of added cells was 10(9) cells per ml at a flow rate of 10(-4) m s-1, the densities in the effluent reached 70 and 100% of those added in salt solution and deionized water, respectively, and 44 and 57% of the bacteria were transported through the aquifer solids.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of sodium chloride on transport of bacteria in a saturated aquifer material.

Determinations were made of the influence of NaCl concentration, cell density, and flow velocity on the transport of Pseudomonas sp. strain KL2 through columns of aquifer sand under saturated conditions. A pulse-type boundary condition was used. The experiments were conducted by using 0.3-m-long Plexiglas columns with an internal diameter of 0.05 m. When a 1-h pulse of a 0.01 M NaCl solution containing 10(8) cells per ml was added at a flow rate of 10(-4) m s-1, the bacterial density in the effluent never exceeded 2.2% of the density of cells added, and only 1.5% of the bacteria passed through the aquifer material. In contrast, when the bacteria were applied in distilled water, the relative cell density in the effluent approached 100%, and 60% of the bacteria were transported through the aquifer solids. Under these conditions, the breakthrough of Pseudomonas sp. strain KL2 was slower than chloride. When the flow rate was 2.0 x 10(-4) m s-1, the cell density in the effluent reached 7.3% of that added in 0.01 M NaCl solution, but only 3.9% of the bacteria were transported through the aquifer particles. On the other hand, the density in the effluent approached 100% of that added in deionized water, and 77% of the added bacteria were recovered. When the density of added cells was 10(9) cells per ml at a flow rate of 10(-4) m s-1, the densities in the effluent reached 70 and 100% of those added in salt solution and deionized water, respectively, and 44 and 57% of the bacteria were transported through the aquifer solids.(ABSTRACT TRUNCATED AT 250 WORDS)     

Synthesis of [(14)C]pyrroloquinoline quinone (PQQ) in E. coli using genes for PQQ synthesis from K. pneumoniae

Radiochemical forms of pyrroloquinoline quinone (PQQ) are of utility in studies to determine the metabolic role and fate of PQQ in biological systems. Accordingly, we have synthesized [(14)C]PQQ using a tyrosine auxotrophic strain of Escherichia coli (AT2471). A construct containing the six genes required for PQQ synthesis from Klebsiella pneumoniae was used to transform the auxotrophic strain of E. coli. E. coli were then grown in minimal M9 medium containing 3.7x10(9) Bq/mmol [(14)C]tyrosine. At confluence, the medium was collected and applied to a DEAE A-25 anionic exchange column; [(14)C]PQQ was eluted using a KCl gradient (0-2 M in 0.1 M potassium phosphate buffer, pH 7.0). Radioactivity co-eluting as PQQ was next pooled, acidified and passed through a C-18 column; [(14)C]PQQ was eluted with a phosphate buffer (0.1 M, pH 7.0). Reverse phase HPLC (C-18) using either the ion-pairing agent trifluoroacetic acid (0. 1%) and an acetonitrile gradient or phosphoric acid and a methanol gradient were used to isolate [(14)C]PQQ. Fractions were collected and analyzed by liquid scintillation counting. (14)C-labelled compounds isolated from the medium eluted corresponding to the elution of various tyrosine-derived products or PQQ. The radioactive compound corresponding to PQQ was also reacted with acetone to form 5-acetonyl-PQQ, which co-eluted with a 5-acetonyl-PQQ standard, as a validation of [(14)C]PQQ synthesis. The specific activity of synthesized [(14)C]PQQ was 3.7x10(9) Bq/mmol [(14)C]PQQ, equal to that of [U-(14)C]tyrosine initially added to the medium.     

Enhanced superoxide anion generation but reduced leukotriene B4 productivity in thioglycollate-elicited peritoneal macrophages

Lipoxygenase metabolism of arachidonic acid was compared between peritoneal macrophages from untreated rats and those from rats on day 7 after intraperitoneal injection of thioglycollate broth (TG). Resident macrophages (M phi) from untreated rats produced mainly LTB4 (303 +/- 25 pmol/5 x 10(6) cells) and 5-HETE (431 +/- 56 pmol/5 x 10(6) cells) when stimulated with 5 micrograms/ml calcium ionophore A23187 for 20 min at 37 degrees C. On the other hand, TG-elicited M phi generated less amounts of lipoxygenase metabolites (157 +/- 10 pmol LTB4 and 319 +/- 19 pmol 5-HETE/5 x 10(6) cells) with the same stimulus. Then, leukotriene productivity was examined by using subcellular fractions of each M phi lysate and an unstable epoxide intermediate, leukotriene A4. LTA4 hydrolase activity was mainly contained in soluble fractions from the both groups of M phi. The cytosol fraction from the resident M phi exhibited the following specific and total activity; 2.2 +/- 0.1 nmol LTB4/mg protein/5 min and 12.2 +/- 0.5 nmol LTB4/5 min per 10(8) cells. On the contrary, the cytosol fraction from the TG-elicited M phi showed 1.9 +/- 0.1 nmol LTB4/mg protein/5 min and 9.6 +/- 0.3 nmol LTB4/5 min per 10(8) cells. The resident M phi, however, generated 0.14 +/- 0.04 nmol O2-/min/4 x 10(5) cells whereas the TG-elicited M phi did 0.49 +/- 0.13 nmol O2-/min/4 x 10(5) cells when stimulated with wheat germ lectin. These results suggest that the TG-elicited macrophages show enhanced superoxide production but generate less lipoxygenase metabolites.(ABSTRACT TRUNCATED AT 250 WORDS)     

Evaluation of Methods for Reestablishment of L-Cell Suspension Cultures Directly from Liquid Nitrogen Stored Stocks

Methods were developed and evaluated for the preservation of tissue cells grown in suspension culture and the reestablishment of suspension cultures directly from inoculum stored at -175 C. The factors investigated were processing pH, temperature of processing, freezing medium, and method of inoculation of the starter suspension cultures from the frozen stock (-175 C). Three parameters, cell viability, cell size, and growth potential in suspension culture after freezing, were used to evaluate the various factors. The results indicate that cells processed at 4 C, frozen at 1 C per min to -50 C in a medium containing 5% dimethyl sulfoxide plus 10% bovine serum at concentrations of 2 x 10(7) to 4 x 10(7) cells/ml, and stored at -175 C will reestablish suspension cultures directly from frozen seed. A 1-ml amount of frozen stock inoculated into 99 ml of medium routinely produced 2 x 10(6) to 3 x 10(6) viable cells/ml (2 x 10(8) to 3 x 10(8) total cells) in suspension culture in 4 to 5 days. Inoculum preserved by this procedure grew equally well in either serum-free or serum-containing growth medium.     

DNA damage by 5-nitro-2-furylacrylic acid, a nitrofuran derivative

5-Nitro-2-furylacrylic acid (5-NFA) caused dose dependent inhibition of growth of Escherichia coli K-12 strain AB 2480 (uvr-, rec-), the 37% (D37) and 10% (D10) survival doses being 1.0 microgram/ml.h and 1.75 micrograms/ml.h, respectively. Although much higher doses of drug were required to achieve comparable inhibition of growth of E. coli strain 1157 (repair proficient), significant filamentation of these cells was produced by treatment with 1.0 microgram/ml 5-NFA for 4 hr. Ultraviolet absorption data and thermal chromatography through hydroxyapatite (HAP) column revealed that 5-NFA treatment of E. coli strain AB 2480 produced more than 80% of DNA reversibly bihelical due to the formation of interstrand cross-links and the initial part of the reaction obeyed a first order relation. 5-NFA also produced dose-dependent increase of prophage induction in E. coli strain GY 5027: envA, uvrB, ampA1, strA (lambda). The implications of the action of 5-NFA on DNA in relation to the induction of 'SOS' functions and carcinogenesis were discussed.     

Inoculum size as a factor limiting success of inoculation for biodegradation

A study was conducted to determine the role of inoculum size of a bacterium introduced into nonsterile lake water in the biodegradation of a synthetic chemical. The test species was a strain of Pseudomonas cepacia able to grow on and mineralize 10 ng to 30 micrograms of p-nitrophenol (PNP) per ml in salts solution. When introduced into water from Beebe Lake at densities of 330 cells per ml, P. cepacia did not mineralize 1.0 microgram of PNP per ml. However, PNP was mineralized in lake water inoculated with 3.3 X 10(4) to 3.6 X 10(5) P. cepacia cells per ml. In lake water containing 1.0 microgram of PNP per ml, a P. cepacia population of 230 or 120 cells per ml declined until no cells were detectable at 13 h, but when the initial density was 4.3 X 10(4) cells per ml, sufficient survivors remained after the initial decline to multiply at the expense of PNP. The decline in bacterial abundance coincided with multiplication of protozoa. Cycloheximide and nystatin killed the protozoa and allowed the bacterium to multiply and mineralize 1.0 microgram of PNP, even when the initial P. cepacia density was 230 or 360 cells per ml. The lake water contained few lytic bacteria. The addition of KH2PO4 or NH4NO3 permitted biodegradation of PNP at low cell densities of P. cepacia. We suggest that a species able to degrade a synthetic chemical in culture may fail to bring about the same transformation in natural waters, because small populations added as inocula may be eliminated by protozoan grazing or may fail to survive because of nutrient deficiencies.     

Inoculum size as a factor limiting success of inoculation for biodegradation.

A study was conducted to determine the role of inoculum size of a bacterium introduced into nonsterile lake water in the biodegradation of a synthetic chemical. The test species was a strain of Pseudomonas cepacia able to grow on and mineralize 10 ng to 30 micrograms of p-nitrophenol (PNP) per ml in salts solution. When introduced into water from Beebe Lake at densities of 330 cells per ml, P. cepacia did not mineralize 1.0 microgram of PNP per ml. However, PNP was mineralized in lake water inoculated with 3.3 X 10(4) to 3.6 X 10(5) P. cepacia cells per ml. In lake water containing 1.0 microgram of PNP per ml, a P. cepacia population of 230 or 120 cells per ml declined until no cells were detectable at 13 h, but when the initial density was 4.3 X 10(4) cells per ml, sufficient survivors remained after the initial decline to multiply at the expense of PNP. The decline in bacterial abundance coincided with multiplication of protozoa. Cycloheximide and nystatin killed the protozoa and allowed the bacterium to multiply and mineralize 1.0 microgram of PNP, even when the initial P. cepacia density was 230 or 360 cells per ml. The lake water contained few lytic bacteria. The addition of KH2PO4 or NH4NO3 permitted biodegradation of PNP at low cell densities of P. cepacia. We suggest that a species able to degrade a synthetic chemical in culture may fail to bring about the same transformation in natural waters, because small populations added as inocula may be eliminated by protozoan grazing or may fail to survive because of nutrient deficiencies.     

Adsorption of 14C-labeled gramicidin S on cell of bacteria

Gramicidin S (GS) containing 14C-labeled proline was synthesized by a solid-phase method, and the labeled GS dihydrochloride was obtained as crystals. The labeled GS exhibited same antibacterial activity as natural GS. Strains sensitive to GS (B. subtilis and S. aureus) and an insensitive strain (E. coli) were treated with the labeled GS, and the amount of the labeled GS adsorbed on the cells was measured. GS was adsorbed rapidly on the cells of the sensitive strains; the amount adsorbed increased linearly with GS concentration up to 1-1.5 microgram/ml, and at a lower rate at above 1.5 microgram/ml. GS molecules covered most of the cell surface at the minimum inhibitory concentration of 1.5 microgram/ml; the number of molecules adsorbed per cell was 1.3-1.4 x 10(6). No GS was adsorbed by the insensitive strain.     

Inhibition of microbial growth by ajoene, a sulfur-containing compound derived from garlic.

Ajoene, a garlic-derived sulfur-containing compound that prevents platelet aggregation, exhibited broad-spectrum antimicrobial activity. Growth of gram-positive bacteria, such as Bacillus cereus, Bacillus subtilis, Mycobacterium smegmatis, and Streptomyces griseus, was inhibited at 5 micrograms of ajoene per ml. Staphylococcus aureus and Lactobacillus plantarum also were inhibited below 20 micrograms of ajoene per ml. For gram-negative bacteria, such as Escherichia coli, Klebsiella pneumoniae, and Xanthomonas maltophilia, MICs were between 100 and 160 micrograms/ml. Ajoene also inhibited yeast growth at concentrations below 20 micrograms/ml. The microbicidal effect of ajoene on growing cells was observed at slightly higher concentrations than the corresponding MICs. B. cereus and Saccharomyces cerevisiae were killed at 30 micrograms of ajoene per ml after 24 h of cultivation when cultivation was started at 10(5) cells per ml. However, the minimal microbicidal concentrations for resting cells were at 10 to 100 times higher concentrations than the corresponding MICs. The disulfide bond in ajoene appears to be necessary for the antimicrobial activity of ajoene, since reduction by cysteine, which reacts with disulfide bonds, abolished its antimicrobial activity.