Determination of bacterially derived auxins using a microplate method

Rapid and efficient methods for determining the ability of soil and rhizosphere bacteria to produce key metabolites which are useful in growth promotion or suppression of plant growth are needed. A microplate method was developed and compared to a standard method for assays of auxin compounds produced by bacteria. The microplate method was similar to the standard method in accuracy of determination, required less chemical reagents, and considerably reduced the time required for analyses.     

Comparison of microplate and macrodilution methods in time�Ckill study of new antimicrobial drugs

In consideration of high production costs of new antimicrobial drugs, a more convenient and economical method for time?Ckill study is urgently required. In the present experiment, we attempted to demonstrate the feasibility of microplate method as an alternative measure of macrodilution method for time?Ckill study. Three conventional antibiotics (ciprofloxacin, ceftazidime, and levofloxacin) and two antimicrobial peptides [A-thanatin and K₄-S4(1?C16)a] were used to determine time?Ckill curves against Escherichia coli ATCC 25922 and Staphylococcus epidermidis ATCC 14990. Meanwhile, both methods were also performed with three antisense peptide nucleic acids (PNA3, PNA4, and PNA5) targeting ropD gene of Staphylococcus aureus ATCC 29213 and MRSA WHO-2. In order to study the correlation between the two methods, the growth inhibition rate of PNAs, antimicrobial peptides, and antibiotics for the tested strains were evaluated. A strong agreement between the results obtained from the two methods has been demonstrated. Although microplate method required longer incubation time for a significant result than macrodilution method, the former provides a more convenient, economical, and stable way to perform time?Ckill test for these agents. Thus, we concluded that microplate method was an available measure for time?Ckill study of new antimicrobial drugs.     

Estimating non-isothermal bacterial growth in foods from isothermal experimental data

AIM: To develop a mathematical method to estimate non-isothermal microbial growth curves in foods from experiments performed under isothermal conditions and demonstrate the method's applicability with published growth data. METHODS AND RESULTS: Published isothermal growth curves of Pseudomonas spp. in refrigerated fish at 0-8 degrees C and Escherichia coli 1952 in a nutritional broth at 27.6-36 degrees C were fitted with two different three-parameter 'primary models' and the temperature dependence of their parameters was fitted by ad hoc empirical 'secondary models'. These were used to generate non-isothermal growth curves by solving, numerically, a differential equation derived on the premise that the momentary non-isothermal growth rate is the isothermal rate at the momentary temperature, at a time that corresponds to the momentary growth level of the population. The predicted non-isothermal growth curves were in agreement with the reported experimental ones and, as expected, the quality of the predictions did not depend on the 'primary model' chosen for the calculation. CONCLUSIONS: A common type of sigmoid growth curve can be adequately described by three-parameter 'primary models'. At least in the two systems examined, these could be used to predict growth patterns under a variety of continuous and discontinuous non-isothermal temperature profiles. SIGNIFICANCE AND IMPACT OF THE STUDY: The described mathematical method whenever validated experimentally will enable the simulation of the microbial quality of stored and transported foods under a large variety of existing or contemplated commercial temperature histories.     

Growth of Populus euramericana

Growth curves of successive leaves of Populus euramericana (Dode) Guinier 'Robusta' have been determined. With ample supply of water and nutrients the growth of a poplar shoot follows a fixed pattern: an initial logarithmic acceleration phase followed by a stationary phase in which leaves of equal size are produced at a constant rate. Analysis of growth curves of leaves enabled the growth curves of leaf primordia to be predicted. These primordial growth curves are compared to the indirectly determined growth curves of primordia by measuring the lengths of successive leaf primordia in the apex during the stationary phase of growth. The increase in length of successive leaves in the acceleration phase of growth continues for a longer period at high than at low irradiace. The relative growth rates of leaf primordia, leaves and internodes are discussed in terms of shoot growth and phyllotaxis.     

Applications of a microplate reader in yeast physiology research

Microplate readers have been useful assistants of researchers for several decades. This work is focused on the applications of a simple absorbance microplate reader in yeast physiology research, and its advantages and limitations in comparison with alternative methods are discussed. The two main procedures involved are measuring growth curves and monitoring the pH changes of medium using two different pH indicators. We suggest mathematical formulas for converting absorbance data into pH values. With a microplate reader as many as 96 samples can be simultaneously analyzed, while medium consumption is minimized to 100 microL per sample. The results can be observed in 24-48 h (for growth curves) or in 1-3 h (for pH changes) with minimal hands-on time required.     

Effect of temperature on growth and chemotactic behaviour of Campylobacter jejuni

AIM: To determine the effect of two physiologically important temperatures on growth and chemotaxis in Campylobacter jejuni. METHODS AND RESULTS: Growth curves of Camp. jejuni were compared at 37 degrees C and 42 degrees C. Chemotaxis was compared at 37 degrees C and 42 degrees C by the disc and capillary assays. Student's t-test was applied to the results of the capillary assay to assess the significance in the difference between chemotaxis at the two temperatures. Both, the growth rate and chemotactic ability of the isolate, were found to be greater at 37 degrees C. CONCLUSIONS: Quorum sensing (related to population density), a regulation mechanism of virulence in micro-organisms, has been reported in Campylobacter. Chemotaxis is also a known virulence factor of Campylobacter. Both, growth (in terms of population density) and chemotaxis, being greater at 37 degrees C than at 42 degrees C, suggests that the physiological temperature of humans (37 degrees C) might be more favourable for the expression of virulence in Campylobacter than that of birds (42 degrees C). SIGNIFICANCE AND IMPACT OF THE STUDY: It is as yet not known why Campylobacter causes disease in humans but is avirulent in birds. This study suggests that the human body temperature is optimum for growth and chemotaxis in Campylobacter. There is scope for the study of temperature regulation of other virulence determinants of Campylobacter.     

Biosurfactants are involved in the biological control of Verticillium microsclerotia by Pseudomonas spp

AIMS: To examine the effect of previously described bacterial antagonists on the viability of Verticillium microsclerotia in vitro and to elucidate the possible modes of action of bacterial strains in the suppression of Verticillium microsclerotia viability. METHODS AND RESULTS: A microplate assay was developed to test the suppressive effect of well-defined Pseudomonas spp. on the viability of Verticillium microsclerotia in vitro. Experiments using phenazine- and biosurfactant-deficient mutants indicated that biosurfactants and phenazine-1-carboxylic acid play a role in the suppression of microsclerotia viability by Pseudomonas spp. In addition, microsclerotia colonization tests revealed that Pseudomonas spp. are able to colonize the surface of the microsclerotia, but not the inner matrix. Growth response curves showed that the population levels of Pseudomonas spp. increased when they were in the vicinity of Verticillium microsclerotia, indicating that Pseudomonas spp. may utilize nutrients from the microsclerotia for their growth. CONCLUSIONS: Pseudomonas spp. seem to be good candidates for Verticilllium microsclerotia biocontrol. Biosurfactant production is one of the main mechanisms involved in their mode of action. SIGNIFICANCE AND IMPACT OF THE STUDY: This line of work may contribute to a better understanding of biological control agents and their working mechanisms.     

Modification of A-stat for the characterization of microorganisms

Two novel modifications of continuous culture with gradual change of dilution rate (A-stat): D-stat and auxo-accelerostat were evaluated in the studies of the effect of changing individual environmental parameters (T, pH, pO(2), substrate concentration, etc.) on growth characteristics of different microorganisms. Common for those cultivation methods is that one environmental parameter is programmed to change with constant change rate (change-stat) while the others are kept constant or in the range not affecting the growth characteristics. The environment response growth curves were obtained starting with chemostat (in A-stat and D-stat) or auxostat (in auxo-accelerostat) steady-state cultures followed by change of set-point value of the desired cultivation parameter. Physiological studies of Saccharomyces sp. and Lactococcus lactis were combined with validation of the different modifications of the A-stat method based on well-known cultivation techniques: chemostat, pH-auxostat, pO(2)-auxostat CO(2)-auxostat and fed-batch. The auxo-accelerostat was shown to be very efficient for cell characterization and dynamic studies in growth environments with excess of essential substrates. Choosing the rate of change of environmental parameters was shown to be critical in comparative physiological studies of microorganisms.     

Simple method for developing percentile growth curves for height and weight

The present paper demonstrates the ease of use of method I by Preece and Baine ([1978] Ann Hum Biol 5:1-24) in generating smoothed growth curves for both height and weight. Using the National Center for Health Statistics (NCHS) growth curve data, smoothed curves were developed and compared to those produced using the least-squares-cubic-spline method. Based on the lower sum of squares and better fit of shape as indicated by residual examination, it was concluded that the method I curve fitting procedure by Preece and Baine ([1978] Ann Hum Biol 5:1-24) fit centile growth curves for height and weight in 2-18-year-old male and female children as well as, if not better than, the least-squares-cubic-spline method used in developing the 1979 NCHS growth curves. Further, as this paper demonstrates, smoothed curves can be generated on a desktop computer using readily available software (the SOLVER function within Microsoft EXCEL).     

Modelling the effect of temperature and water activity on growth of Aspergillus niger strains and applications for food spoilage moulds

AIMS: To develop a model for the combined effect of water activity (a(w)) and temperature on growth of strains of Aspergillus niger, and comparison with data on food spoilage moulds in the literature. METHODS AND RESULTS: An extended combined model describing the growth of two strains of A. niger, as a function of temperature (25-30 degrees C) and a(w) (0.90-0.99) was developed. The growth rate (micro) was expressed as the increase in colony radial growth per unit of time. This extends the previous square root model showing the relationship between temperature and bacterial growth rate developed by Ratkowsky et al. (1983) and the parabolic relationship between the logarithm of the growth rate and a(w) developed by Gibson et al. (1994). A good correlation between the experimental data and the model predictions was obtained, with regression coefficients (r(2)) > 0.99. In addition, the use of this model allowed predictions of the cardinal a(w) levels: a(w(min)), and a(w(opt)). The estimation of the minimum a(w) levels (a(w(min))) was in accordance with data in the literature for similar and a range of other Aspergillus and related species, regardless of the solutes used for a(w) modification. The estimation of the optimal a(w) (a(w(opt))) and the optimal growth rate (micro(opt)) were in good agreement with the experimental results and data from the literature. CONCLUSIONS: This approach enables accurate prediction of the combined effects of environmental factors on growth of spoilage fungi for rapid prediction of cardinal limits using surface response curves. SIGNIFICANCE AND IMPACT OF THE STUDY: This approach is a rapid method for predicting optimal and marginal conditions for growth of a wide range of spoilage micro-organisms in relation to interacting environmental conditions and will have applications for improving shelf-life of intermediate moisture foods.     

A model for analyzing growth kinetics of a slowly growing Mycobacterium sp.

This report describes a simple method for quantifying viable mycobacteria and for determining generation time. We used statistical models and computer analysis of growth curves generated for the slowly growing mycobacterium Mycobacterium paratuberculosis under controlled conditions to derive a mathematical formula relating the dependent variable, growth, to the independent variables, log10 number of organisms in the inoculum (inoculum size) and incubation time. Growth was measured by a radiometric method which detects 14CO2 release during metabolism of a 14C-labeled substrate. The radiometric method allowed for early detection of growth and detected as few as three viable bacteria. The coefficient of variation between culture vials inoculated with the same number of M. paratuberculosis was 0.083. Radiometric measurements were highly correlated to spectrophotometric and plate count methods for measuring growth (r = 0.962 and 0.992, respectively). The proportion of the total variability explained by the model in a goodness of fit test was 0.9994. Application of the model to broth cultures provided accurate estimates of the number of M. paratuberculosis (standard error = 0.21, log10 scale) and the growth rate (coefficient of variation, 0.03). Generation time was observed to be dependent upon the number of organisms in the inoculum. The model accurately described all phases of growth of M. paratuberculosis and can likely be applied to other slowly growing microorganisms.     

Evaluation of the growth rate of MCF-7 breast cancer multicellular spheroids using three mathematical models

Abstract. Growth data on 60 multicellular spheroids of MCF-7 human breast cancer cells were fitted, on an individual basis, by the Gompertz, Bertalanffy and logistic equations. MCF-7 spheroids, initiated and grown in medium containing oestrogens, exhibited a growth rate that decreased continuously as spheroid size increased. Plots of spheroid volume v. time generated sigmoid curves that showed an early portion with an approximately exponential volume increase; a middle region or retardation phase characterized by a continuously decreasing growth rate; and, finally, a late segment or plateau phase approaching zero growth rate, that permitted an estimate of the maximum spheroid size (V_max). Growth curves generated by MCF-7 spheroids under different experimental conditions (hormones, drugs and radiation exposures) can be compared after normalization. Linearized forms of the fitted Gompertz curves provided a convenient way to express differences in growth rate.     

A rapid and sensitive method for the detection of Yersinia enterocolitica strains from clinical samples

AIMS: To compare three culture methods to detect Yersinia enterocolitica from oral or rectal swabs from experimentally infected pigs. METHODS AND RESULTS: The three methods used were: direct plating on Cefsulodin-Irgasan-Novobiocin (CIN) agar, cold enrichment in phosphate buffered saline (PBS) followed by plating on CIN agar and selective enrichment with Luria-Bertani-Bile Salts Irgasan (LB-BSI) followed by plating on CIN agar. Selective enrichment with LB-BSI produced the highest recovery rate (63%), when compared with cold enrichment (52%) and plating on CIN agar alone (43%). Selective enrichment with LB-BSI was significantly (P < 0.02) more sensitive than direct plating on CIN agar and more sensitive than cold enrichment (P < 0.1). CONCLUSIONS, SIGNIFICANCE AND IMPACT OF THE STUDY: Selective enrichment with LB-BSI was more sensitive than the widely accepted method of cold enrichment and it reduced the time required for detection of Y. enterocolitica by three weeks. Selective enrichment with LB-BSI was also compatible with a multiplex PCR technique.     

A model for analyzing growth kinetics of a slowly growing Mycobacterium sp

This report describes a simple method for quantifying viable mycobacteria and for determining generation time. We used statistical models and computer analysis of growth curves generated for the slowly growing mycobacterium Mycobacterium paratuberculosis under controlled conditions to derive a mathematical formula relating the dependent variable, growth, to the independent variables, log10 number of organisms in the inoculum (inoculum size) and incubation time. Growth was measured by a radiometric method which detects 14CO2 release during metabolism of a 14C-labeled substrate. The radiometric method allowed for early detection of growth and detected as few as three viable bacteria. The coefficient of variation between culture vials inoculated with the same number of M. paratuberculosis was 0.083. Radiometric measurements were highly correlated to spectrophotometric and plate count methods for measuring growth (r = 0.962 and 0.992, respectively). The proportion of the total variability explained by the model in a goodness of fit test was 0.9994. Application of the model to broth cultures provided accurate estimates of the number of M. paratuberculosis (standard error = 0.21, log10 scale) and the growth rate (coefficient of variation, 0.03). Generation time was observed to be dependent upon the number of organisms in the inoculum. The model accurately described all phases of growth of M. paratuberculosis and can likely be applied to other slowly growing microorganisms.     

A marine bacterial adhesion microplate test using the DAPI fluorescent dye: a new method to screen antifouling agents

AIMS: To develop a method to screen antifouling agents against marine bacterial adhesion as a sensitive, rapid and quantitative microplate fluorescent test. METHODS AND RESULTS: Our experimental method is based on a natural biofilm formed by mono-incubation of the marine bacterium Pseudoalteromonas sp. D41 in sterile natural sea water in a 96-well polystyrene microplate. The 4'6-diamidino-2-phenylindole dye was used to quantify adhered bacteria in each well. The total measured fluorescence in the wells was correlated with the amount of bacteria showing a detection limit of one bacterium per 5 microm(2) and quantifying 2 x 10(7) to 2 x 10(8) bacteria adhered per cm(2). The antifouling properties of three commercial surface-active agents and chlorine were tested by this method in the prevention of adhesion and also in the detachment of already adhered bacteria. The marine bacterial adhesion inhibition rate depending on the agent concentration showed a sigmoid shaped dose-response curve. CONCLUSIONS: This test is well adapted for a rapid and quantitative first screening of antifouling agents directly in seawater in the early steps of marine biofilm formation. Significance AND IMPACT OF THE STUDY: In contrast to the usual screenings of antifouling products which detect a bactericidal activity, this test is more appropriate to screen antifouling agents for bacterial adhesion removal or bacterial adhesion inhibition activities. This screening test focuses on the antifouling properties of the products, especially the initial steps of marine biofilm formation.     

Predictive modelling approach applied to spoilage fungi: growth of Penicillium brevicompactum on solid media

Growth of Penicillium brevicompactum was examined on five solid media. Fungal growth was established by diameter measurements up to 50 days. Seventy experimental curves were fitted by Baranyi's primary predictive model. The growth rates were then analysed by non-parametric statistical methods. Penicillium brevicompactum could colonize the surface of solid media containing up to 700 g l-1 of sugar (50% glucose-50% fructose) with a growth rate of 0.9 mm day-1 (median values). Fitting curves by non-linear models followed by a non-parametric multiple comparison seems to be a convenient method for detecting differences in fungal growth on solid media. These two methods would be useful for studying fungal spoilage of bakery products with intermediate water activity.     

Engineering analysis of the high-density heterotrophic cultivation of mung bean sprouts

This study investigated the heterotrophic growth behavior of mung beans cultivated in an individual bed under water supply. The fresh weight of mung beans in the bed was estimated, and changes in temperature, and oxygen and carbon dioxide concentrations were recorded during the cultivation period. The specific growth rate, oxygen uptake rate, and carbon dioxide evolution rate, based on the fresh weight in the bed, were calculated. Growth under heterotrophic cultivation can be classified into the following three stages. Reductions in specific oxygen uptake rate, specific carbon dioxide evolution rate, and specific energy production rate corresponded to that of specific growth rate. Indicators of biological activity related to oxygen and carbon dioxide were evaluated quantitatively for beds under high-density heterotrophic cultivation. Moreover, the results obtained from this study successfully demonstrate that there is a relationship between the growth of mung beans and indicators of biological activity.     

A novel method of supplying nutrients permits predictable shoot growth and root : shoot ratios of pre-transplant bedding plants

BACKGROUND AND AIMS: Growth of bedding plants, in small peat plugs, relies on nutrients in the irrigation solution. The object of the study was to find a way of modifying the nutrient supply so that good-quality seedlings can be grown rapidly and yet have the high root : shoot ratios essential for efficient transplanting. METHODS: A new procedure was devised in which the concentrations of nutrients in the irrigation solution were modified during growth according to changing plant demand, instead of maintaining the same concentrations throughout growth. The new procedure depends on published algorithms for the dependence of growth rate and optimal plant nutrient concentrations on shoot dry weight W(s) (g m(-2)), and on measuring evapotranspiration rates and shoot dry weights at weekly intervals. Pansy, Viola tricola 'Universal plus yellow' and petunia, Petunia hybrida 'Multiflora light salmon vein' were grown in four independent experiments with the expected optimum nutrient concentration and fractions of the optimum. Root and shoot weights were measured during growth. KEY RESULTS: For each level of nutrient supply W(s) increased with time (t) in days, according to the equation DeltaW(s)/Deltat=K(2)W(s)/(100+W(s)) in which the growth rate coefficient (K(2)) remained approximately constant throughout growth. The value of K(2) for the optimum treatment was defined by incoming radiation and temperature. The value of K(2) for each sub-optimum treatment relative to that for the optimum treatment was logarithmically related to the sub-optimal nutrient supply. Provided the aerial environment was optimal, R(sb)/R(o) approximately W(o)/W(sb) where R is the root : shoot ratio, W is the shoot dry weight, and sb and o indicate sub-optimum and optimum nutrient supplies, respectively. Sub-optimal nutrient concentrations also depressed shoot growth without appreciably affecting root growth when the aerial environment was non-limiting. CONCLUSION: The new procedure can predict the effects of nutrient supply, incoming radiation and temperature on the time course of shoot growth and the root : shoot ratio for a range of growing conditions.     

酶标仪分光光度法在微生物耐性研究上的应用

微生物在环境中的耐性是该微生物在相应环境发挥作用的重要基础。为了获得一种用于微生物耐性分析的快速简便方法,传统平板分离法和酶标仪分光光度法被用于评估其在细菌和链霉菌紫外耐受水平检测中的差异,并分析了酶标仪分光光度法在微生物其他耐性水平检测中的适用性。结果显示,两种检测方法均能体现细菌和链霉菌对紫外线的耐受水平,前者经过稀释、涂布、培养、菌落计数,获得的是菌株在紫外线照射后的存活浓度,而后者经过接种96孔培养板、培养、吸光度检测,获得的是菌株经紫外线照射后的生长曲线,并从生长曲线获知菌株的生长速率、增殖能力等信息。此外,酶标仪分光光度法同样适用于细菌对pH和盐的耐受水平分析,对于链霉菌耐受性分析有一定的适用性。酶标仪法除了能获得与平板分离法相似的耐性水平检测外,还能获得菌株在不同耐性水平上的增殖潜力,且在操作上比平板分离法省时、省力,可用于微生物耐性分析、高通量筛选等研究工作。     

Comparison of LST + MUG broth technique and conventional method for the enumeration of Escherichia coli in foods

AIMS: To reduce the analysis time needed for the enumeration of Escherichia coli, a rapid fluorogenic method (MUG) which takes only 48 h was compared with the standard most probable number (MPN) method which takes 6 days as described in the International Standards Organization (ISO). This study provides reliability data for the fluorogenic method applied to certain foods. METHODS AND RESULTS: Both methods were applied to 500 food samples which were analysed for E. coli enumeration. Agreement between the two methods was found in 409 (81 x 8%) samples; 81 (16 x 2%) samples gave higher values by the fluorogenic method, and only 10 (2 x 0%) samples were more effectively assayed by the ISO method. According to statistical analysis, the reliability between the methods was r = 0 x 9706, r(2) = 0 x 9421 and Cronbach's alpha = 0 x 9851. While all three values showed a high degree of correlation (P < 0 x 0001) between the two methods, McNemar's test demonstrated a significant difference between them, indicating that the MUG method was more reliable than the ISO method. CONCLUSIONS: The data suggest that the fluorogenic method is more reliable and shorter to perform than the standard ISO method. SIGNIFICANCE AND IMPACT OF THE STUDY: Comparison of the two methods may provide a rapid and more reliable alternative for the enumeration of E. coli in food samples.