A micro-computed tomography study of the trabecular bone structure in the femoral head

The goal of this study was to characterize the trabecular microarchitecture of the femoral head using micro-computed tomography (ICT). Femoral head specimens were obtained from subjects following total hip replacement. Cylindrical cores from the specimens were scanned to obtain 3-D images with an isotropic resolution of 26 Im. Bone structural parameters were evaluated on a per millimeter basis: relative bone volume (BV/TV), trabecular number (Tb.N), thickness (Tb.Th) and separation (Tb.Sp), structure model index (SMI), and connectivity (Conn.D). The ICT data show that the first two millimeters, starting at the joint surface, are characterized by more plate-like trabeculae, and are significantly denser than the underlying trabecular bone. Regional differences in the trabecular architecture reveal that the superior pole has significantly higher BV/TV, Tb.N and Tb.Th values, with lower Tb.Sp compared to the inferior and side poles. Because subchondral bone is essential in the load attenuation of joints, the difference in bone structure between the subchondral and trabecular bone might arise from the different functions each have within joint-forming bones. The denser trabecular structure of the superior pole as compared to the inferior pole can be interpreted as a functional adaptation to higher loading in this area.     

Three-dimensional analysis of nonhuman primate trabecular architecture using micro-computed tomography

Until recently, detailed analyses of the architecture of nonhuman primate cancellous bone have not been possible due to a combination of methodological constraints, including poor resolution imaging or destructive protocols. The development of micro-computed tomography (microCT) and morphometric methods associated with this imaging modality offers anthropologists a new means to study the comparative architecture of cancellous bone. Specifically, microCT will allow anthropologists to investigate the relationship between locomotor behavior and trabecular structure. We conducted a preliminary study on the trabecular patterns in the proximal humerus and femur of Hylobates lar, Ateles paniscus, Macaca mulatta, and Papio anubis to investigate the quantitative differences in their trabecular architecture and evaluate the potential of microCT in anthropological inquiry. MicroCT allows the researcher to evaluate variables beyond simple two-dimensional orientations and radiographic densities. For example, this methodology facilitates the study of trabecular thickness and bone volume fraction using three-dimensional data. Results suggest that density-related parameters do not reliably differentiate suspensory-climbing species from quadrupedal species. However, preliminary results indicate that measurements of the degree of anisotropy, a measure of trabecular orientation uniformity, do distinguish suspensory-climbing taxa from more quadrupedal species. The microCT method is an advance over conventional radiography and medical CT because it can accurately resolve micron-sized struts that make up cancellous bone, and from these images a wide array of parameters that have been demonstrated to be related to cancellous bone mechanical properties can be measured. Methodological problems pertinent to any comparative microCT study of primate trabecular architecture are discussed.     

Mechanical significance of femoral head trabecular bone structure in Loris and Galago evaluated using micromechanical finite element models

Work on the interspecific and intraspecific variation of trabecular bone in the proximal femur of primates demonstrates important architectural variation between animals with different locomotor behaviors. This variation is thought to be related to the processes of bone adaptation whereby bone structure is optimized to the mechanical environment. Micromechanical finite element models were created for the proximal femur of the leaping Galago senegalensis and the climbing and quadrupedal Loris tardigradus by converting bone voxels from high-resolution X-ray computed tomography scans of the femoral head to eight-noded brick elements. The resulting models had approximately 1.8 million elements each. Loading conditions representing takeoff phase of a leap and more generalized load orientations were applied to the models, and the models were solved using the iterative "row-by-row" matrix-vector multiplication algorithm. The principal strain and Von Mises stress results for the leaping model were similar for both species at each load orientation. Similar hip joint reaction forces in the range of 4.9 x to 12 x body weight were calculated for both species under each loading condition, but the hip reaction values estimated for Loris were higher than predicted based on locomotor behavior. These results suggest that functional adaptation to hip joint loading may not fully explain the differences in femoral head trabecular bone structure in Galago and Loris. The finite element method represents a unique and useful tool for analyzing the functional adaptation of trabecular bone in a diversity of animals and for reconstructing locomotor behavior in extinct taxa.     

Predicting the permeability of trabecular bone by micro-computed tomography and finite element modeling

The intrinsic permeability of bone plays an important role in the transport of nutrients and minerals within the tissue, and affects the mechanical stimuli that are related to the fate of the stem cells. The objective of this study was to establish a method to assess trabecular bone permeability using experimental and finite element (FE) modeling approaches based on micro computed tomography (µCT) images. Human cadaveric tibia cube specimens (N=23) were scanned with µCT. The permeability was measured experimentally using a custom-developed constant-head permeameter, and computationally by a poroelastic formulation to simulate the fluid flow within the discretized bone matrix and pore phase. The average of the experimentally measured permeability was 4.84×10⁻¹⁰ m² with a standard deviation of 3.70×10⁻¹⁰ m². A regression model of the µCT determined that the maximum bone area to total area ratio (maxBA/TA) for all slices that are perpendicular to the direction of fluid flow explained 84% of the variability of the natural logarithm of the experimentally measured permeability. The 2D measure of maxBA/TA performed better than 3D measures in general, although some parameters were reasonably well associated with permeability such as bone volume ratio (BV/TV, r=−0.71), the bone surface/bone volume (BS/BV, r=0.73), and the trabecular thickness (TbTh, r=−0.71). The correlation between the permeability predicted with FE models and experimentally measured permeability was reasonable (r=0.69), but the FE approach did not accurately represent the wide variability of permeability measured experimentally. The results of this study suggest that the changes in the trabecular bone microarchitecture have an exponential relationship with permeability, and the use of µCT-based 2D measurement of maxBA/TA performs well at predicting permeability, thus providing a convenient approach to measure this important aspect affecting biomechanical functions in the tissue.     

Quantifying the impact of soil compaction on root system architecture in tomato (Solanum lycopersicum) by X-ray micro-computed tomography

Background and Aims

We sought to explore the interactions between roots and soil without disturbance and in four dimensions (i.e. 3-D plus time) using X-ray micro-computed tomography.

Methods

The roots of tomato Solanum lycopersicum ‘Ailsa Craig’ plants were visualized in undisturbed soil columns for 10 consecutive days to measure the effect of soil compaction on selected root traits including elongation rate. Treatments included bulk density (1·2 vs. 1·6 g cm⁻³) and soil type (loamy sand vs. clay loam).

Key Results

Plants grown at the higher soil bulk density exploited smaller soil volumes (P < 0·05) and exhibited reductions in root surface area (P < 0·001), total root volume (P < 0·001) and total root length (P < 0·05), but had a greater mean root diameter (P < 0·05) than at low soil bulk density. Swelling of the root tip area was observed in compacted soil (P < 0·05) and the tortuosity of the root path was also greater (P < 0·01). Root elongation rates varied greatly during the 10-d observation period (P < 0·001), increasing to a maximum at day 2 before decreasing to a minimum at day 4. The emergence of lateral roots occurred later in plants grown in compacted soil (P < 0·01). Novel rooting characteristics (convex hull volume, centroid and maximum width), measured by image analysis, were successfully employed to discriminate treatment effects. The root systems of plants grown in compacted soil had smaller convex hull volumes (P < 0·05), a higher centre of mass (P < 0·05) and a smaller maximum width than roots grown in uncompacted soil.

Conclusions

Soil compaction adversely affects root system architecture, influencing resource capture by limiting the volume of soil explored. Lateral roots formed later in plants grown in compacted soil and total root length and surface area were reduced. Root diameter was increased and swelling of the root tip occurred in compacted soil.     

Quantification of porosity in Acropora pulchra (Brook 1891) using X-ray micro-computed tomography techniques

Skeletal density and porosity characteristics are key parameters for investigations into scleractinian coral growth and for assessing the effects of a range of anthropogenic influences on coral reefs. Typically, skeletal density is measured by using planar X-rays of thin slabs cut from mound-shaped colonies or, for branching forms, by using methods based on Archimedean principles. This paper describes a novel non-destructive technique based on micro-computed tomography (micro-CT) to measure porosity of branching coral skeleton. This approach incorporates methods for segmenting internal and external portions of branch and for distinguishing between skeleton and air, whilst accounting for the effects of beam hardening. Measurements were obtained from colonies of branching Acropora pulchra collected across a reef-flat transect at King Reef, central nearshore Great Barrier Reef. The results show significant variation in porosity within and among branches sampled from individual colonies, but not within a reef-flat transect. Micro-CT techniques yield comparable results to traditional methods based on Archimedean principles, but offer advantages in their suitability for a wider range of coral specimens because of the non-destructive nature of the technique and in their more rigorous control of model parameters that can bias results.     

The three-dimensional structure of trabecular bone in the femoral head of strepsirrhine primates

It has been hypothesized for over a hundred years that trabecular bone plays an important structural role in the musculoskeletal system of animals and that it responds dynamically to applied loads through growth. The objectives of this study are to quantify the three-dimensional structure of femoral head trabecular bone in a sample of extant strepsirrhines and to relate patterns of interspecific variation to locomotor behavioral differences. The bone volume fraction (BV/TV) and fabric anisotropy of trabecular bone in the femoral heads of Cheirogaleus major, Avahi laniger, Galago senegalensis, Galago alleni, Loris tardigradus, Otolemur crassicaudatus, and Perodicticus potto were quantified in three dimensions using serial high-resolution X-ray computed tomography scan data. A volume based method was used to quantify the structural anisotropy in three cubic samples located inside the central portion of the femoral head. Significant structural differences were found between the predominantly leaping galagines and indriids and the nonleaping lorisines and cheirogaleids. The leapers in general have relatively anisotropic trabecular bone. The galagines display a unique pattern of decreasing bone volume and increasing anisotropy moving from the superior to the inferior half of the femoral head. By contrast, the nonleaping taxa possess relatively uniform and isotropic bone throughout the femoral head. The differences in femoral head trabecular structure among these taxa seem to be related to locomotor behavioral differences, reflecting variation in the use and loading of the hip joint during normal locomotion.     

Quantification of lung fibrosis and emphysema in mice using automated micro-computed tomography

Background

In vivo high-resolution micro-computed tomography allows for longitudinal image-based measurements in animal models of lung disease. The combination of repetitive high resolution imaging with fully automated quantitative image analysis in mouse models of lung fibrosis lung benefits preclinical research. This study aimed to develop and validate such an automated micro-computed tomography analysis algorithm for quantification of aerated lung volume in mice; an indicator of pulmonary fibrosis and emphysema severity.

Methodology

Mice received an intratracheal instillation of bleomycin (n = 8), elastase (0.25U elastase n = 9, 0.5U elastase n = 8) or saline control (n = 6 for fibrosis, n = 5 for emphysema). A subset of mice was scanned without intervention, to evaluate potential radiation-induced toxicity (n = 4). Some bleomycin-instilled mice were treated with imatinib for proof of concept (n = 8). Mice were scanned weekly, until four weeks after induction, when they underwent pulmonary function testing, lung histology and collagen quantification. Aerated lung volumes were calculated with our automated algorithm.

Principal Findings

Our automated image-based aerated lung volume quantification method is reproducible with low intra-subject variability. Bleomycin-treated mice had significantly lower scan-derived aerated lung volumes, compared to controls. Aerated lung volume correlated with the histopathological fibrosis score and total lung collagen content. Inversely, a dose-dependent increase in lung volume was observed in elastase-treated mice. Serial scanning of individual mice is feasible and visualized dynamic disease progression. No radiation-induced toxicity was observed. Three-dimensional images provided critical topographical information.

Conclusions

We report on a high resolution in vivo micro-computed tomography image analysis algorithm that runs fully automated and allows quantification of aerated lung volume in mice. This method is reproducible with low inherent measurement variability. We show that it is a reliable quantitative tool to investigate experimental lung fibrosis and emphysema in mice. Its non-invasive nature has the unique benefit to allow dynamic 4D evaluation of disease processes and therapeutic interventions.     

Computed tomography in the diagnosis of head and neck diseases]

A total of 106 patients suffering from tumors and inflammatory diseases of the head and neck were investigated. CT was performed in axial and frontal projections using a method of intravenous contrast image enhancement. The purpose of CT was to reveal an abnormal lesion, to detect its initial site, spreading, to make differential diagnosis, and to evaluate therapeutic results. Some limitations of CT in differential diagnosis of small-size tumors were observed. CT can be used for differential diagnosis of tumors and inflammatory processes in the accessory nasal sinuses. CT results were important for a choice of therapeutic methods, radiation therapy design, assessment of efficacy of surgical and radiation therapy, and the detection of tumor recurrences.     

Establishment of national diagnostic reference levels (DRLs) for radiotherapy localisation computer tomography of the head and neck

Aim

The aim of this research is to establish if variation exists in the dose delivered for head and neck (HN) localisation computed tomography (CT) imaging in radiation therapy (RT); to propose a national diagnostic reference levels (DRLs) for this procedure and to make a comparison between the national DRL and a DRL of a European sample.

A twenty-five-year chronicle of a group of captive nocturnal prosimians (Perodicticus potto)

Four Perodicticus potto survived captivity from 4 to 24-6 years. The male that died on 16th July 1984 was sexually mature at the time of his capture in December 1959, and thus is believed to have been slightly older than 26 years at the time of his death. These data suggest a longer life span for this species than has previously been recorded in the published literature, and do not conform well with information from other terrestrial mammals, showing a general trend of increasing longevity with increasing size (length). A 25-year record of these four animals is summarized, with an emphasis on demographic, behavioural and medical observations.     

Predictions of the elastic modulus of trabecular bone in the femoral head and the intertrochanter: a solitary wave-based approach

Biomechanics and Modeling in Mechanobiology - This paper deals with the numerical prediction of the elastic modulus of trabecular bone in the femoral head (FH) and the intertrochanteric (IT) region...     

In vivo characterization of lung morphology and function in anesthetized free-breathing mice using micro-computed tomography.

Lung morphology and function in human subjects can be monitored with computed tomography (CT). Because many human respiratory diseases are routinely modeled in rodents, a means of monitoring the changes in the structure and function of the rodent lung is desired. High-resolution images of the rodent lung can be attained with specialized micro-CT equipment, which provides a means of monitoring rodent models of lung disease noninvasively with a clinically relevant method. Previous studies have shown respiratory-gated images of intubated and respirated mice. Although the image quality and resolution are sufficient in these studies to make quantitative measurements, these measurements of lung structure will depend on the settings of the ventilator and not on the respiratory mechanics of the individual animals. In addition, intubation and ventilation can have unnatural effects on the respiratory dynamics of the animal, because the airway pressure, tidal volume, and respiratory rate are selected by the operator. In these experiments, important information about the symptoms of the respiratory disease being studied may be missed because the respiration is forced to conform to the ventilator settings. In this study, we implement a method of respiratory-gated micro-CT for use with anesthetized free-breathing rodents. From the micro-CT images, quantitative analysis of the structure of the lungs of healthy unconscious mice was performed to obtain airway diameters, lung and airway volumes, and CT densities at end expiration and during inspiration. Because the animals were free breathing, we were able to calculate tidal volume (0.09 +/- 0.03 ml) and functional residual capacity (0.16 +/- 0.03 ml).     

Evaluation of trabecular mechanical and microstructural properties in human calcaneal bone of advanced age using mechanical testing, microCT, and DXA

Early detection of fracture risk is important for initiating treatment and improving outcomes from both physiologic and pathologic causes of bone loss. While bone mineral density (a quantity measure) has traditionally been used for this purpose, alternative structural imaging parameters (quality measures) are proposed to better predict bone's true mechanical properties. To further elucidate this, trabecular bone from cadaveric human calcanei were used to evaluate the interrelationship of mechanical and structural parameters using mechanical testing, dual energy X-ray absorptiometry (DXA) scanning, and micro computed tomography (microCT) imaging. Directional specific structural properties were assessed in three-dimensional (3-D) and correlated to mechanical testing and DXA. The results demonstrated that microCT-derived indices of bone quality (i.e., volume fraction and structural model index) are better than DXA-derived bone mineral density for the prediction of the mechanical parameters of bone (i.e., elastic modulus, yield stress, and ultimate stress). Diagnostically, this implies that future work on the early prediction of fracture risk should focus as much on bone quality as on quantity. Furthermore, the results of this study show that a loss of bone primarily affects the connectedness and overall number of trabeculae. Ultimate stress, however, is better correlated with trabecular number than thickness. As such, primary prevention of osteoporosis may be more important than later countermeasures for bone loss.     

Angular orientation of trabecular bone in the femoral head and its relationship to hip joint loads in leaping primates

The elastic properties and mechanical behavior of trabecular bone are largely determined by its three-dimensional (3D) fabric structure. Recent work demonstrating a correlation between the primary mechanical and material axes in trabecular bone specimens suggests that fabric orientation may be used to infer directional components of the material strength and, by extension, the hypothetical loading regime. Here we quantify the principal orientation of trabecular bone in the femoral head and relate these principal fabric directions to loading patterns during various locomotor behaviors. The proximal femora of a diverse sample of prosimians were scanned using a high-resolution X-ray computed tomography scanner with resolution of better than 50 mum. Spherical volumes of interest were defined within the femoral heads and the 3D fabric anisotropy was calculated using the mean intercept length and star volume distribution methods. In addition to differences in bone volume and anisotropy, significant differences were found in the spatial orientation of the principal trabecular axes depending on locomotor behavior. The principal orientations for leapers (Galago, Tarsius, Avahi) are relatively tightly clustered (alpha(95) confidence limit: 8.2; angular variance s: 18.2 degrees ) and oriented in a superoanterior direction, while those of nonleapers are more variable across a range of directions (alpha(95): 16.8; s: 42.0 degrees ). The mean principal directions are significantly different for leaping vs. nonleaping taxa. These results further suggest a relationship between bone microstructure in the hip joint and locomotor behavior and indicate a similarity of loading across leapers despite differences in kinematics and phylogeny.     

The venous system of the head and neck of the opossum (Didelphis virginiana)

The venous system of the head and neck of the opossum, Didelphis virginiana, was studied by injecting the veins with a tinctorial mass. Gross dissection spechmens injected with a colored gelatin solution and corrosion specimens prepared by Batson's technique (Batson, '55) were utilized to describe the venous pattern in greater detail than is presently available in the literature. The venous drainage of the superficial structures of the head is principally by way of the V. jugularis externa and its tributaries. Although small emissary veins connect the Sinus cavernosus with the Plexus pterygoideus and the V. maxillaris, the dural venous sinuses drain primarily into the Plexus vertebralis internus and into the V. maxillaris by way of the V. emissaria foraminis retroarticularis. The small V. jugularis interna receives minor connections from the Plexus pterygoideus, the Sinus cavernosus and the Sinus petrosus ventralis as well as anastomotic tributaries from the Plexus vertebralis and the plexus of veins around the hyoid bone. However, the V. jugularis interna serves mainly as a pathway for venous drainage from the deeper structures of the neck and only minimally for draining the brain.