Vibrational fluctuations of hydrogen bonds in a DNA double helix with alternating TA type inserts.

The Green's function technique is applied to a study of breathing modes in a DNA double helix which contains a region of different base pairs from the rest of the double helix. The calculation is performed on an alternating poly(dC-dG).poly(dC-dG) helix in the B conformation with four consecutive base pairs replaced by a model of a biological promoter region with four alternating T-A,A-T base pairs, henceforth referred to as (TATA)2. The average stretch of interbase hydrogen bonds is found to be amplified around the insert. This is likely related to the (TATA)2 insert having a lower stability against hydrogen bond melting than the two semi-infinite poly(dC-dG).poly(dC-dG) helices. The insert region may be considered to be a site of enhanced tendency to melt in such a helix. The results show that an alternating AT insert of four base pairs has a larger average hydrogen bond stretch inside and outside the insert region than the average hydrogen bond stretch inside and outside an insert of four consecutive A-T base pairs, henceforth referred to as (AAAA).(TTTT). Calculations are performed which show that the enhancement of the average hydrogen bond stretch around an alternating TA type insert is greatly dependent upon the local modes and not the inband modes. The amount of local mode enhanced average stretch is explored as a function of insert size.     

Vibrational fluctuations of hydrogen bonds in a DNA double helix with nonuniform base pairs.

The Green's function technique is applied to a study of breathing modes in a DNA double helix which contains a region of different base pairs from the rest of the double helix. The calculation is performed on a G-C helix in the B conformation with four consecutive base pairs replaced by A-T. The average stretch in hydrogen bonds is found amplified around the A-T base pair region compared with that of poly(dG)-poly(dC). This is likely related to the A-T regions lower stability against hydrogen bond melting. The A-T region may be considered to be the initiation site for melting in such a helix.     

Experiment acknowledged the Watson-Crick hypothesis: a review of B-DNA double helix structural features at atomic resolution

The dodecamer d(CGCGAATTCGCG) forms a right-handed B-DNA double helix of a Watson-Crick type both in crystal and solution. It is the first piece of DNA longer than one helix turn whose molecular structure has become known at the atomic resolution. The article reviews qualitative aspects of its structure with a special emphasis on local variations in the disposition of base pairs in the double helix.     

Melting of Cross-Linked DNA V. Cross-Linking Effect Caused by Local Stabilization of the Double Helix

Abstract

DNA interstrand cross-links are usually formed due to bidentate covalent or coordination binding of a cross-linking agent to nucleotides of different strands. However interstrand linkages can be also caused by any type of chemical modification that gives rise to a strong local stabilization of the double helix. These stabilized sites conserve their helical structure and prevent local and total strand separation at temperatures above the melting of ordinary AT and GC base pairs. This local stabilization makes DNA melting fully reversible and independent of strand concentration like ordinary covalent interstrand cross-links. The stabilization can be caused by all the types of chemical modifications (interstrand cross-links, intrastrand cross-links or monofunctional adducts) if they give rise to a strong enough local stabilization of the double helix. Our calculation demonstrates that an increase in stability by 25 to 30 kcal in the free energy of a single base pair of the double helix is sufficient for this “cross-linking effect” (i.e. conserving the helicity of this base pair and preventing strand separation after melting of ordinary base pairs). For the situation where there is more then one stabilized site in a DNA duplex (e.g., 1 stabilized site per 1000 bp), a lower stabilization per site is sufficient for the “cross-linking effect” (18–20 kcal). A substantial increase in DNA stability was found in various experimental studies for some metal-based anti-tumor compounds. These compounds may give rise to the effect described above. If ligand induced stabilization is distributed among several neighboring base pairs, a much lower minimum increase per stabilized base pair is sufficient to produce the cross-linking effect (1 bp- 24.4 kcal; 5 bp- 5.3 kcal; 10 bp- 2.9 kcal, 25 bp- 1.4 kcal; 50 bp- 1.0 kcal). The relatively weak non-covalent binding of histones or protamines that cover long regions of DNA (20–40 bp) can also cause this effect if the salt concentration of the solution is sufficiently low to cause strong local stabilization of the double helix. Stretches of GC pairs more than 25 bp in length inserted into poly(AT) DNA also exhibit properties of stabilizing interstrand cross-links.     

Melting of cross-linked DNA v. cross-linking effect caused by local stabilization of the double helix

DNA interstrand cross-links are usually formed due to bidentate covalent or coordination binding of a cross-linking agent to nucleotides of different strands. However interstrand linkages can be also caused by any type of chemical modification that gives rise to a strong local stabilization of the double helix. These stabilized sites conserve their helical structure and prevent local and total strand separation at temperatures above the melting of ordinary AT and GC base pairs. This local stabilization makes DNA melting fully reversible and independent of strand concentration like ordinary covalent interstrand cross-links. The stabilization can be caused by all the types of chemical modifications (interstrand cross-links, intrastrand cross-links or monofunctional adducts) if they give rise to a strong enough local stabilization of the double helix. Our calculation demonstrates that an increase in stability by 25 to 30 kcal in the free energy of a single base pair of the double helix is sufficient for this "cross-linking effect" (i.e. conserving the helicity of this base pair and preventing strand separation after melting of ordinary base pairs). For the situation where there is more then one stabilized site in a DNA duplex (e.g., 1 stabilized site per 1000 bp), a lower stabilization per site is sufficient for the "cross-linking effect" (18 - 20 kcal). A substantial increase in DNA stability was found in various experimental studies for some metal-based anti-tumor compounds. These compounds may give rise to the effect described above. If ligand induced stabilization is distributed among several neighboring base pairs, a much lower minimum increase per stabilized base pair is sufficient to produce the cross-linking effect (1 bp- 24.4 kcal; 5 bp- 5.3 kcal; 10 bp- 2.9 kcal, 25 bp- 1.4 kcal; 50 bp- 1.0 kcal). The relatively weak non-covalent binding of histones or protamines that cover long regions of DNA (20- 40 bp) can also cause this effect if the salt concentration of the solution is sufficiently low to cause strong local stabilization of the double helix. Stretches of GC pairs more than 25 bp in length inserted into poly(AT) DNA also exhibit properties of stabilizing interstrand cross-links.     

Origin of DNA helical structure and its sequence dependence

Conformational analysis of DNA shows that the origin of the B-form double helix can be attributed in large part to the atomic charge pattern in the base pairs. The charge patterns favor specific helical stacking of the base pairs. Base pairs alone--without backbones--have a strong tendency to form helix, indicating that the backbones play a rather passive role in determining the basic helical structure of DNA. It is mainly the electrostatic interactions determined by the charge pattern on base pairs that stabilize a particular helical conformation. The charge pattern in the base pairs appears to be responsible for much of the sequence dependence of DNA conformation, rather than steric clashes.     

Solution structural studies of the Ag(I)-DNA complex.

We report equilibrium dialysis and electric dichroism studies of the two strong complexes (I and II) of silver ion with DNA. Cooperative conversion of DNA to the stronger type I complex results in a 9% length decrease, and a structure in which intercalated ethidium is perpendicular to the helix axis. Upon addition of more Ag+ to form the type II complex, the DNA length reverts to its original value and bound ethidium once again becomes tilted from the plane perpendicular to the helix axis. In both type I and type II Ag (I) - DNA complexes, ethidium binding is mildly cooperative. We interpret the results in terms of a sequence of silver-induced cooperative switches of DNA from its B-form structure with propeller twisted base pairs to a structure with flat base pairs in the type I complex, and back again to propellered base pairs in the type II complex.     

Adenine-guanine base pairing ribosomal RNA.

Analyses of secondary structures proposed for ribosomal RNA's show that, of the different kinds of base pairs directly adjoining the ends of postulated double-helical regions, only A-G with A at the 5' end significantly exceeds the number expected for a random base distribution. An A(syn)-G(trans) hydrogen-bonded basepair is proposed. This could fit at the end of an undistorted double helix, but would prevent further base stacking, thus favoring a break in the double helix to produce a non-linear tertiary structure.     

Spatial translational motions of base pairs in DNA molecules: Application of the extended matrix generator method

We have used the elementary generator matrices outlined in the preceding paper to examine the conformational plasticity of the nucleic acid double helix. Here we investigate kinked DNA structures made up of alternating B- and A-type helices and intrinsically curved duplexes perturbed by the intercalation of ligands. We model the B-to-A transition by the lateral translation of adjacent base pairs, and the intercalation of ligands by the vertical displacement of neighboring residues. We report a complete set of average configuration-dependent parameters, ranging from scalars (i.e., persistence lengths) to first- and second-order tensor parameters (i.e., average second moments of inertia), as well as approximations of the associated spatial distributions of the DNA and their angular correlations. The average structures of short chains (of lengths less than 100 base pairs) with local kinks or intrinsically curved sequences are essentially rigid rods. At the smallest chain lengths (10 base pairs), the kinked and curved chains exhibit similar average properties, although they are structurally perturbed compared to the standard B-DNA duplex. In contrast, at lengths of 200 base pairs, the curved and kinked chains are more compact on average and are located in a different space from the standard B- or A-DNA helix. While A-DNA is shorter and thicker than B-DNA in x-ray models, the long flexible A-DNA helix is thinner and more extended on average than its B-DNA counterpart because of more limited fluctuations in local structure. Curved polymers of 50 base pairs or longer also show significantly greater asymmetry than other DNAs (in terms of the distribution of base pairs with respect to the center of gravity of the chain). The intercalation of drugs in the curved DNA straightens and extends the smoothly deformed template. The dimensions of the average ellipsoidal boundaries defining the configurations of the intercalated polymers are roughly double those of the intrinsically curved chain. The altered proportions and orientations of these density functions reflect the changing shape and flexibility of the double helix. The calculations shed new light on the possible structural role of short A-DNA fragments in long B-type duplexes and also offer a model for understanding how GC-specific intercalative ligands can straighten naturally curved DNA. The mechanism is not immediately obvious from current models of DNA curvature, which attribute the bending of the chain to a perturbed structure in repeating tracts of A · T base pairs. © 1994 John Wiley & Sons, Inc.     

The molecular structure of the complex of Hoechst 33258 and the DNA dodecamer d(CGCGAATTCGCG).

The crystal structure of the complex between the dodecamer d(CGCGAATTCGCG) and a synthetic dye molecule Hoechst 33258 was solved by X-ray diffraction analysis and refined to an R-factor of 15.7% at 2.25 A resolution. The crescent-shaped Hoechst compound is found to bind to the central four AATT base pairs in the narrow minor groove of the B-DNA double helix. The piperazine ring of the drug has its flat face almost parallel to the aromatic bisbenzimidazole ring and lies sideways in the minor groove. No evidence of disordered structure of the drug is seen in the complex. The binding of Hoechst to DNA is stabilized by a combination of hydrogen bonding, van der Waals interaction and electrostatic interactions. The binding preference for AT base pairs by the drug is the result of the close contact between the Hoechst molecule and the C2 hydrogen atoms of adenine. The nature of these contacts precludes the binding of the drug to G-C base pairs due to the presence of N2 amino groups of guanines. The present crystal structural information agrees well with the data obtained from chemical footprinting experiments.     

Distortions induced in double-stranded oligonucleotides by the binding of cis- or trans-diammine-dichloroplatinum(II) to the d(GTG) sequence.

Conformational changes induced in double-stranded oligonucleotides by the binding of trans- or cis-diamminedichloro platinum(II) to the d(GTG) sequence have been characterized by means of melting temperatures, electrophoretic migrations in non-denaturing polyacrylamide gels, reactivities with the artificial nuclease Phenanthroline-copper and with chemical probes. The cis-platinum adduct behaves more as a centre of directed bend than as a hinge joint, the induced bend angle being of the order of 25-30 degrees. The double helix is locally denatured over 2 base pairs (corresponding to the platinated 5'G residue and the central T residue) and is distorted over 4-5 base pairs. The trans-platinum adduct behaves also more as a centre of directed bend than as a hinge joint, the induced bend angle being of the order of 60 degrees. The double helix is locally denatured over 4 base pairs (corresponding to the immediately 5'T residue adjacent to the adduct and to the three base residues of the adduct). Both the cis- and trans-platinum adducts decrease the thermal stability of the double helix.     

Base pair buckling can eliminate the interstrand purine clash at the CpG steps in B-DNA caused by the base pair propeller twisting

Results of calculations using various empirical potentials suggest that base pair buckling, which commonly occurs in DNA crystal structures, is sufficient to eliminate the steric clash at CpG steps in B-DNA, originating from the base pair propeller twisting. The buckling is formed by an inclination of cytosines while deviations of guanines from a plane perpendicular to the double helix axis are unfavorable. The buckling is accompanied by an increased vertical separation of the base pair centers but the buckled arrangement of base pairs is at least as stable as when the vertical separation is normal and buckle zero. In addition, room is created by the increased vertical separation for the bases to propeller twist as is observed in DNA crystal structures. Further stabilization of base stacking is introduced into the buckled base pair arrangement by roll opening the base pairs into the double helix minor groove. The roll may lead to the double helix bending and liberation of guanines from the strictly perpendicular orientation to the double helix axis. The liberated guanines further contribute to the base pair buckling and stacking improvement. This work also suggests a characteristic very stable DNA structure promoted by nucleotide sequences in which runs of purines follow runs of pyrimidine bases.     

Conformational Effects of DNA Stretching

DNA is an extensible molecule, and an extended conformation of DNA is involved in some biological processes. We have examined the effect of elongation stress on the conformational properties of DNA base pairs by conformational analysis. The calculations show that stretching does significantly affect the conformational properties and flexibilities of base pairs. In particular, we have found that the propeller twist in base pairs reverses its sign upon stretching. The energy profile analysis indicates that electrostatic interactions make a major contribution to the stabilization of the positive-propeller-twist configuration in stretched DNA. This stretching also results in a monotonic decrease in the helical twist angle, tending to unwind the double helix. Fluctuations in most variables initially increase upon stretching, because of unstacking of base pairs, but then the fluctuations decrease as DNA is stretched further, owing to the formation of specific interactions between base pairs induced by the positive propeller twist. Thus, the stretching of DNA has particularly significant effects upon DNA flexibility. These changes in both the conformation and flexibility of base pairs probably have a role in functional interactions with proteins.     

Conformational effects of DNA stretching

DNA is an extensible molecule, and an extended conformation of DNA is involved in some biological processes. We have examined the effect of elongation stress on the conformational properties of DNA base pairs by conformational analysis. The calculations show that stretching does significantly affect the conformational properties and flexibilities of base pairs. In particular, we have found that the propeller twist in base pairs reverses its sign upon stretching. The energy profile analysis indicates that electrostatic interactions make a major contribution to the stabilization of the positive-propeller-twist configuration in stretched DNA. This stretching also results in a monotonic decrease in the helical twist angle, tending to unwind the double helix. Fluctuations in most variables initially increase upon stretching, because of unstacking of base pairs, but then the fluctuations decrease as DNA is stretched further, owing to the formation of specific interactions between base pairs induced by the positive propeller twist. Thus, the stretching of DNA has particularly significant effects upon DNA flexibility. These changes in both the conformation and flexibility of base pairs probably have a role in functional interactions with proteins.     

X-ray and NMR studies of the DNA oligomer d(ATATAT): Hoogsteen base pairing in duplex DNA

We present and analyze the structure of the oligonucleotide d(ATATAT) found in two different forms by X-ray crystallography and in solution by NMR. We find that in both crystal lattices the oligonucleotide forms an antiparallel double helical duplex in which base pairing is of the Hoogsteen type. The double helix is apparently very similar to the standard B-form of DNA, with about 10 base pairs per turn. However, the adenines in the duplex are flipped over; as a result, the physicochemical features of both grooves of the helix are changed. In particular, the minor groove is narrow and hydrophobic. On the other hand, d(ATATAT) displays a propensity to adopt the B conformation in solution. These results confirm the polymorphism of AT-rich sequences in DNA. Furthermore, we show that extrahelical adenines and thymines can be minor groove binders in Hoogsteen DNA.     

Index to Authors,Volume 3

Abstract

Results of calculations using various empirical potentials suggest that base pair buckling, which commonly occurs in DNA crystal structures, is sufficient to eliminate the steric clash at CpG steps in B-DNA, originating from the base pair propeller twisting. The buckling is formed by an inclination of cytosines while deviations of guanines from a plane perpendicular to the double helix axis are unfavorable. The buckling is accompanied by an increased vertical separation of the base pair centers but the buckled arrangement of base pairs is at least as stable as when the vertical separation is normal and buckle zero. In addition, room is created by the increased vertical separation for the bases to propeller twist as is observed in DNA crystal structures. Further stabilization of base stacking is introduced into the buckled base pair arrangement by roll opening the base pairs into the double helix minor groove. The roll may lead to the double helix bending and liberation of guanines from the strictly perpendicular orientation to the double helix axis. The liberated guanines further contribute to the base pair buckling and stacking improvement. This work also suggests a characteristic very stable DNA structure promoted by nucleotide sequences in which runs of purines follow runs of pyrimidine bases.     

Triple helical DNA in a duplex context and base pair opening

It is fundamental to explore in atomic detail the behavior of DNA triple helices as a means to understand the role they might play in vivo and to better engineer their use in genetic technologies, such as antigene therapy. To this aim we have performed atomistic simulations of a purine-rich antiparallel triple helix stretch of 10 base triplets flanked by canonical Watson–Crick double helices. At the same time we have explored the thermodynamic behavior of a flipping Watson–Crick base pair in the context of the triple and double helix. The third strand can be accommodated in a B-like duplex conformation. Upon binding, the double helix changes shape, and becomes more rigid. The triple-helical region increases its major groove width mainly by oversliding in the negative direction. The resulting conformations are somewhere between the A and B conformations with base pairs remaining almost perpendicular to the helical axis. The neighboring duplex regions maintain a B DNA conformation. Base pair opening in the duplex regions is more probable than in the triplex and binding of the Hoogsteen strand does not influence base pair breathing in the neighboring duplex region.     

Sequence-dependent motions of DNA: a normal mode analysis at the base-pair level

Computer simulation of the dynamic structure of DNA can be carried out at various levels of resolution. Detailed high resolution information about the motions of DNA is typically collected for the atoms in a few turns of double helix. At low resolution, by contrast, the sequence-dependence features of DNA are usually neglected and molecules with thousands of base pairs are treated as ideal elastic rods. The present normal mode analysis of DNA in terms of six base-pair "step" parameters per chain residue addresses the dynamic structure of the double helix at intermediate resolution, i.e., the mesoscopic level of a few hundred base pairs. Sequence-dependent effects are incorporated into the calculations by taking advantage of "knowledge-based" harmonic energy functions deduced from the mean values and dispersion of the base-pair "step" parameters in high-resolution DNA crystal structures. Spatial arrangements sampled along the dominant low frequency modes have end-to-end distances comparable to those of exact polymer models which incorporate all possible chain configurations. The normal mode analysis accounts for the overall bending, i.e., persistence length, of the double helix and shows how known discrepancies in the measured twisting constants of long DNA molecules could originate in the deformability of neighboring base-pair steps. The calculations also reveal how the natural coupling of local conformational variables affects the global motions of DNA. Successful correspondence of the computed stretching modulus with experimental data requires that the DNA base pairs be inclined with respect to the direction of stretching, with chain extension effected by low energy transverse motions that preserve the strong van der Waals' attractions of neighboring base-pair planes. The calculations further show how one can "engineer" the macroscopic properties of DNA in terms of dimer deformability so that polymers which are intrinsically straight in the equilibrium state exhibit the mesoscopic bending anisotropy essential to DNA curvature and loop formation.     

ATP-dependent minor groove recognition of TA base pairs is required for template melting by the E1 initiator protein

Template melting is an essential step in the initiation of DNA replication, but the mechanism of template melting is unknown for any replicon. Here we demonstrate that melting of the bovine papillomavirus type 1 ori is a sequence-dependent process which relies on specific recognition of TA base pairs in the minor groove by the E1 initiator. We show that correct template melting is a prerequisite for the formation of a stable double hexamer with helicase activity and that ori mutants that fail to melt correctly are defective for ori unwinding and DNA replication in vivo. Our results also indicate that melting of the DNA is achieved by destabilization of the double helix along its length through multiple interactions with E1, each of which is responsible for melting of a few base pairs, resulting in the extensive melting that is required for initiation of DNA replication.     

Breathing and bending fluctuations in DNA modeled by an open-base-pair kink coupled to axial compression

We develop a model designed to show that flexibility in the DNA molecule can arise from relatively improbable transient opening of base pairs. The axial direction changes at the site of an open base pair. The region between open base pairs is a double helix of hydrogen-bonded base pairs with a slightly decreased rise per residue and a slightly increased helical winding angle. An analysis of the model yields several testable predictions. For example, we predict probability 0.026 for a base pair to be open at 25°C, a value close to that measured by hydrogen-exchange experiments. Other predictions involve matters like the variation of persistence length with ionic strength and temperature, the variation of helical winding angle with temperature, and the kinetics of heat denaturation. An additional result of the analysis is an explanation of the high degree of local stiffness of the DNA molecule. Strong resistance to bending fluctuations is provided from two sources: increased polyelectrolyte repulsion among phosphate groups in the axially compressed stacks between open base pairs and the tendency of stacking forces to oppose opening of a base pair. Stacking forces, however, also support compression of the stacks between open base pairs, so that the net effect of stacking forces on elastic bending of DNA is small relative to the polyelectrolyte effect. If the ionic charges on the phosphate groups were absent, DNA would spontaneously fold, driven by the entropy gained when about 1% of its base pairs open.