Characterization and cloning of a Tenebrio molitor hemolymph protein with sequence similarity to insect odorant-binding proteins

The yellow mealworm beetle, Tenebrio molitor, produces a number of moderately abundant low molecular weight hemolymph proteins ( approximately 12 kDa) which behave in a similar manner during purification and share antigenic epitopes. The cDNA sequence of the major component (THP12) was determined and the deduced protein sequence was found to be similar to those of insect odorant-binding proteins. Southern blot analysis suggests that at least some of the diversity in this family of proteins is encoded at the gene level. Both northern and western blot analysis indicate that THP12 is present in a variety of developmental stages and both sexes. THP12 was originally classified as an antifreeze protein, but the lack of antifreeze activity in the recombinant protein, as well as the clear separation of the antifreeze activity from THP12 following HPLC purification, has ruled out this function. The abundance of THP12, the similarity of THP12 to insect odorant-binding proteins, and the presence of hydrophobic cavities inside the protein (Rothemund et al., A new class of hexahelical insect proteins revealed as putative carriers of small hydrophobic ligands. Structure, 7 (1999) 1325-1332.) suggest that THP12 may function to carry non-water soluble compounds in the hemolymph. THP12 is also similar, particularly in structurally important regions, to other insect proteins from non-sensory tissues, suggesting the existence of a large family of carrier proteins which may perform diverse functions throughout the insect.     

Heat-induced dimerization of BCL-xL through alpha-helix swapping

The dimerization of anti-apoptotic BCL-xL by three-dimensional domain swapping has recently been discovered at alkaline pH; however, the high energetic barrier between the dimer and monomer forms of BCL-xL prevents them from interconverting at room temperature and neutral pH. Here, we demonstrate that BCL-xL dimers can be easily prepared by heating concentrated protein above 50 degrees C. The 38 kDa BCL-xL dimer was fully characterized by multi-resonance nuclear magnetic resonance (NMR) spectroscopy, and the mechanism of dimerization by alpha-helix swapping was confirmed. Dimerization strongly affects the NMR signals from the turn between helices alpha5 and alpha6 of BCL-xL and a portion of the long loop between helices alpha1 and alpha2. Measurements of residual dipolar couplings demonstrate that the solution structure of the BCL-xL dimer is very close to the crystal structure. Dimer formation does not prevent tight binding of ligands to the hydrophobic cleft of BCL-xL; however, binding of a BID BH3-peptide or a polyphenol drug, gossypol, to BCL-xL significantly slowed monomer-dimer interconversion and is an example of the control of BCL protein oligomerization by ligand binding.     

The 3D solution structure of the C-terminal region of Ku86 (Ku86CTR)

In eukaryotes the non-homologous end-joining repair of double strand breaks in DNA is executed by a series of proteins that bring about the synapsis, preparation and ligation of the broken DNA ends. The mechanism of this process appears to be initiated by the obligate heterodimer (Ku70/Ku86) protein complex Ku that has affinity for DNA ends. Ku then recruits the DNA-dependent protein kinase catalytic subunit (DNA-PKcs). The three-dimensional structures of the major part of the Ku heterodimer, representing the DNA-binding core, both free and bound to DNA are known from X-ray crystallography. However, these structures lack a region of ca 190 residues from the C-terminal region (CTR) of the Ku86 subunit (also known as Lupus Ku autoantigen p86, Ku80, or XRCC5) that includes the extreme C-terminal tail that is reported to be sufficient for DNA-PKcs-binding. We have examined the structural characteristics of the Ku86CTR protein expressed in bacteria. By deletion mutagenesis and heteronuclear NMR spectroscopy we localised a globular domain consisting of residues 592-709. Constructs comprising additional residues either to the N-terminal side (residues 543-709), or the C-terminal side (residues 592-732), which includes the putative DNA-PKcs-binding motif, yielded NMR spectra consistent with these extra regions lacking ordered structure. The three-dimensional solution structure of the core globular domain of the C-terminal region of Ku86 (Ku86CTR(592-709)) has been determined using heteronuclear NMR spectroscopy and dynamical simulated annealing using structural restraints from nuclear Overhauser effect spectroscopy, and scalar and residual dipolar couplings. The polypeptide fold comprises six regions of alpha-helical secondary structure that has an overall superhelical topology remotely homologous to the MIF4G homology domain of the human nuclear cap binding protein 80 kDa subunit and the VHS domain of the Drosophila protein Hrs, though strict analysis of the structures suggests that these domains are not functionally related. Two prominent hydrophobic pockets in the gap between helices alpha2 and alpha4 suggest a potential ligand-binding characteristic for this globular domain.     

Solution structure of chicken liver basic fatty acid binding protein

Chicken liver basic fatty acid binding protein (Lb-FABP) belongs to the basic-type fatty acid binding proteins, a novel group of proteins isolated from liver of different non mammalian species whose structure is not known. The structure of Lb-FABP has been solved by ¹H NMR. The overall fold of Lb-FABP, common to the other proteins of the family, consists of ten antiparallel -strands organised in two nearly ortogonal -sheets with two alpha helices closing the protein cavity where small hydrophobic ligands can be bound. The binding specificity of the protein is not known, however, based on the high sequence and structural similarity with an orthologous protein, ileal lipid binding protein, it is suggested that bile acids may be the putative ligands.     

Structure of sterol carrier protein 2 at 1.8 A resolution reveals a hydrophobic tunnel suitable for lipid binding

Sterol carrier protein 2, also known as nonspecific lipid transfer protein is a ubiquitous, small, basic protein of 13 kDa found in animals. Its primary structure is highly conserved between different species, and it has been implicated in the intracellular transport of lipids and in a wide range of other in vitro functions related to sterol and fatty acid metabolism. Sterol carrier protein 2 deficiency in mice leads to elevated concentrations of phytanic acid in the serum and causes hepatocarcinogenesis. However, its actual physiological role is still unknown. Although sterol carrier protein 2 has been studied extensively in the past 20 years, very little is known concerning its three-dimensional structure. The crystal structure of rabbit sterol carrier protein 2, determined at 1.8 A resolution with the MIRAS method, shows a unique alpha/beta-fold. The core of this protein forms a five-stranded antiparallel beta-sheet flanked by five helices. A C-terminal segment (residues 114-123), together with part of the beta-sheet and four alpha-helices, form a hydrophobic tunnel providing the environment for apolar ligands such as fatty acids and fatty acyl-coenzyme As. Structurally well-characterized nonspecific lipid transfer proteins from plants have hydrophobic tunnel-like cavities, which were identified as the binding site for fatty acids and related apolar ligands. Despite the fact that plant nonspecific lipid transfer proteins are smaller proteins than sterol carrier protein 2, show no sequence homology to sterol carrier protein 2, and are structurally unrelated, the cavities of these two classes of proteins are very similar with respect to size, shape, and hydrophobicity, suggesting a common functional role.     

NMR structure of the [2Fe-2S] ferredoxin domain from soluble methane monooxygenase reductase and interaction with its hydroxylase.

The soluble methane monooxygenase (sMMO) from Methylococcus capsulatus (Bath) is a multicomponent enzyme system required for the conversion of methane to methanol. It comprises a hydroxylase, a regulatory protein, and a reductase. The reductase contains two domains: an NADH-binding and FAD-containing flavin domain and a ferredoxin (Fd) domain carrying a [2Fe-2S] cofactor. Here, we report the solution structure of the reduced form of the 98-amino acid Fd domain (Blazyk, J. L., and Lippard, S. J. Unpublished results) determined by nuclear magnetic resonance (NMR) spectroscopy and restrained molecular dynamics calculations. The structure consists of six beta strands arranged into two beta sheets as well as three alpha helices. Two of these helices form a helix-proline-helix motif, unprecedented among [2Fe-2S] proteins. The [2Fe-2S] cluster is coordinated by the sulfur atoms of cysteine residues 42, 47, 50, and 82. The 10.9 kDa ferredoxin domain of the reductase protein transfers electrons to carboxylate-bridged diiron centers in the 251 kDa hydroxylase component of sMMO. The binding of the Fd domain with the hydroxylase was investigated by NMR spectroscopy. The hydroxylase binding surface on the ferredoxin protein has a polar center surrounded by patches of hydrophobic residues. This arrangement of amino acids differs from that by which previously studied [2Fe-2S] proteins interact with their electron-transfer partners. The critical residues on the Fd domain involved in this binding interaction map well onto the universally conserved residues of sMMO enzymes from different species. We propose that the [2Fe-2S] domains in these other sMMO systems have a fold very similar to the one found here for M. capsulatus (Bath) MMOR-Fd.     

Solution structure of a chemosensory protein from the desert locust Schistocerca gregaria

Chemical stimuli, generally constituted by small volatile organic molecules, are extremely important for the survival of different insect species. In the course of evolution, insects have developed very sophisticated biochemical systems for the binding and the delivery of specific semiochemicals to their cognate membrane-bound receptors. Chemosensory proteins (CSPs) are a class of small soluble proteins present at high concentration in insect chemosensory organs; they are supposed to be involved in carrying the chemical messages from the environment to the chemosensory receptors. In this paper, we report on the solution structure of CSPsg4, a chemosensory protein from the desert locust Schistocerca gregaria, which is expressed in the antennae and other chemosensory organs. The 3D NMR structure revealed an overall fold consisting of six alpha-helices, spanning residues 13-18, 20-31, 40-54, 62-78, 80-90, and 97-103, connected by loops which in some cases show dihedral angles typical of beta-turns. As in the only other chemosensory protein whose structure has been solved so far, namely, CSP from the moth Mamestra brassicae, four helices are arranged to form a V-shaped motif; another helix runs across the two V's, and the last one is packed against the external face. Analysis of the tertiary structure evidenced multiple hydrophobic cavities which could be involved in ligand binding. In fact, incubation of the protein with a natural ligand, namely, oleamide, produced substantial changes to the NMR spectra, suggesting extensive conformational transitions upon ligand binding.     

A novel S100 target conformation is revealed by the solution structure of the Ca2+-S100B-TRTK-12 complex

The Alzheimer-linked neural protein S100B is a signaling molecule shown to control the assembly of intermediate filament proteins in a calcium-sensitive manner. Upon binding calcium, a conformational change occurs in S100B exposing a hydrophobic surface for target protein interactions. The synthetic peptide TRTK-12 (TRTKIDWNKILS), derived from random bacteriophage library screening, bears sequence similarity to several intermediate filament proteins and has the highest calcium-dependent affinity of any target molecule for S100B to date (K(d) <1 microm). In this work, the three-dimensional structure of the Ca(2+)-S100B-TRTK-12 complex has been determined by NMR spectroscopy. The structure reveals an extended, contiguous hydrophobic surface is formed on Ca(2+)-S100B for target interaction. The TRTK-12 peptide adopts a coiled structure that fits into a portion of this surface, anchored at Trp(7), and interacts with multiple hydrophobic contacts in helices III and IV of Ca(2+)-S100B. This interaction is strikingly different from the alpha-helical structures found for other S100 target peptides. By using the TRTK-12 interaction as a guide, in combination with other available S100 target structures, a recognition site on helix I is identified that may act in concert with the TRTK-12-binding site from helices III and IV. This would provide a larger, more complex site to interact with full-length target proteins and would account for the promiscuity observed for S100B target protein interactions.     

The solution NMR structure of Antheraea polyphemus PBP provides new insight into pheromone recognition by pheromone-binding proteins

Pheromone-binding proteins (PBPs) located in the antennae of male moth species play an important role in olfaction. They are carrier proteins, believed to transport volatile hydrophobic pheromone molecules across the aqueous sensillar lymph to the membrane-bound G protein-coupled olfactory receptor proteins. The roles of PBPs in molecular recognition and the mechanisms of pheromone binding and release are poorly understood. Here, we report the NMR structure of a PBP from the giant silk moth Antheraea polyphemus. This is the first structure of a PBP with specific acetate-binding function in vivo. The protein consists of nine alpha-helices: alpha1a (residues 2-5), alpha1b (8-12), alpha1c (16-23), alpha2 (27-34), alpha3a (46-52), alpha3b (54-59), alpha4 (70-79), alpha5 (84-100) and alpha6 (107-125), held together by three disulfide bridges: 19-54, 50-108 and 97-117. A large hydrophobic cavity is located inside the protein, lined with side-chains from all nine helices. The acetate-binding site is located at the narrow end of the cavity formed by the helices alpha3b and alpha4. The pheromone can enter this cavity through an opening between the helix alpha1a, the C-terminal end of the helix alpha6, and the loop between alpha2 and alpha3a. We suggest that Trp37 may play an important role in the initial interaction with the ligand. Our analysis also shows that Asn53 plays the key role in recognition of acetate pheromones specifically, while Phe12, Phe36, Trp37, Phe76, and Phe118 are responsible for non-specific binding, and Leu8 and Ser9 may play a role in ligand chain length recognition.     

The three-dimensional solution structure of Ca(2+)-bound S100A1 as determined by NMR spectroscopy

S100A1 is an EF-hand-containing Ca(2+)-binding protein that undergoes a conformational change upon binding calcium as is necessary to interact with protein targets and initiate a biological response. To better understand how calcium influences the structure and function of S100A1, the three-dimensional structure of calcium-bound S100A1 was determined by multidimensional NMR spectroscopy and compared to the previously determined structure of apo. In total, 3354 nuclear Overhauser effect-derived distance constraints, 240 dihedral constraints, 160 hydrogen bond constraints, and 362 residual dipolar coupling restraints derived from a series of two-dimensional, three-dimensional, and four-dimensional NMR experiments were used in its structure determination (>21 constraints per residue). As with other dimeric S100 proteins, S100A1 is a symmetric homodimer with helices 1, 1', 4, and 4' associating into an X-type four-helix bundle at the dimer interface. Within each subunit there are four alpha-helices and a short antiparallel beta-sheet typical of two helix-loop-helix EF-hand calcium-binding domains. The addition of calcium did not change the interhelical angle of helices 1 and 2 in the pseudo EF-hand significantly; however, there was a large reorientation of helix 3 in the typical EF-hand. The large conformational change exposes a hydrophobic cleft, defined by residues in the hinge region, the C terminus, and regions of helix 3, which are important for the interaction between S100A1 and a peptide (TRTK-12) derived from the actin-capping protein CapZ.     

Interaction of the C-terminal domains of sendai virus N and P proteins: comparison of polymerase-nucleocapsid interactions within the paramyxovirus family

Interaction of the C-terminal domains of Sendai virus (SeV) P and N proteins is crucial for RNA synthesis by correctly positioning the polymerase complex (L+P) onto the nucleocapsid (N/RNA). To better understand this mechanism within the paramyxovirus family, we have studied the complex formed by the SeV C-terminal domains of P (PX) and N (N(TAIL)) proteins by solution nuclear magnetic resonance spectroscopy. We have characterized SeV N(TAIL), which belongs to the class of intrinsically disordered proteins, and precisely defined the binding regions within this latter domain and within PX. SeV N(TAIL) binds with residues 472 to 493, which have a helical propensity (residues 477 to 491) to the surface created by helices alpha2 and alpha3 of PX with a 1:1 stoichiometry, as was also found for measles virus (MV). The binding interface is dominated by charged residues, and the dissociation constant was determined to be 57 +/- 18 microM under conditions of the experiment (i.e., in 0.5 M NaCl). We have also shown that the extreme C terminus of SeV N(TAIL) does not interact with PX, which is in contrast to MV, where a second binding site was identified. In addition, the interaction surfaces of the MV proteins are hydrophobic and a stronger binding constant was found. This gives a good illustration of how selection pressure allowed the C-terminal domains of N and P proteins to evolve concomitantly within this family of viruses in order to lead to protein complexes having the same three-dimensional fold, and thus the same function, but with completely different binding interfaces.     

The structure of the human retinoic acid receptor-beta DNA-binding domain determined by NMR.

The solution structure of the DNA-binding domain (DBD) of the human retinoic acid receptor-beta (hRAR-beta) has been determined by nuclear magnetic resonance (NMR) spectroscopy and distance geometry (DG). The assignments of 1H and 15N resonances were carried out by the use of 1H homonuclear and 15N-1H heteronuclear two- and three-dimensional NMR experiments. The structure of RAR DBD has been obtained on the basis of distance constrains derived from NMR experiments. The structure shows that two "zinc-finger" domains of the protein are followed by two perpendicular alpha-helices and a short beta-sheet near the N-terminus. Apolar residues in both helices form a hydrophobic core. Binding models of RAR DBD to its inverted and direct repeat response elements have been constructed based on this three-dimensional structure.     

Muscle fatty acid-binding protein

Muscle or heart fatty acid-binding protein is a low molecular weight protein that binds long-chain fatty acids in the cytosol of muscle tissues. The three-dimensional structure of the human, bovine and insect proteins are known, either via X-ray or NMR techniques. The folding of the protein closely resembles that of the other FABPs: ten anti-parallel beta-strands are arranged to form a clam shell, closed at one end by two alpha-helices. This arrangement allows the formation of an internal cavity where the fatty acid can be accommodated, protected and isolated from the external environment. The fatty acid in the protein interior is stabilized by electrostatic and hydrogen bond interactions of its carboxylic head with charged or polar residues of the protein and by interactions of its tail with hydrophobic residues. The three-dimensional structure of different fatty acid-protein complexes along with molecular dynamics simulations are now providing insight into the molecular details of the specificity of the ligand binding.     

Solution structure of isoform 1 of Roadblock/LC7, a light chain in the dynein complex

Roadblock/LC7 is a member of a class of dynein light chains involved in regulating the function of the dynein complex. We have determined the three-dimensional structure of isoform 1 of the mouse Roadblock/LC7 cytoplasmic dynein light chain (robl1_mouse) by NMR spectroscopy. In contrast to a previously reported NMR structure of the human homolog with 96% sequence identity (PDB 1TGQ), which showed the protein as a monomer, our results indicate clearly that robl1 exists as a symmetric homodimer. The two beta3-strands pair with each other and form a continuous ten-stranded beta-sheet. The 25-residue alpha2-helix from one subunit packs antiparallel to that of the other subunit on the face of the beta-sheet. Zipper-like hydrophobic contacts between the two helices serve to stabilize the dimer. Through an NMR titration experiment, we localized the site on robl1_mouse that interacts with the 40 residue peptide spanning residues 243 through 282 of IC74-1_rat. These results provide physical evidence for a symmetrical interaction between dimeric robl1 and the two molecules of IC74-1 in the dynein complex.     

Solution structure of the Ras binding domain of the protein kinase Byr2 from Schizosaccharomyces pombe.

BACKGROUND: After activation, small GTPases such as Ras transfer the incoming signal to effectors by specifically interacting with the binding domain of these proteins. Structural details of the binding domain of different effectors determine which pathway is predominantly activated. Byr2 from fission yeast is a functional homolog of Raf, which is the direct downstream target of Ras in mammalians that initiates a protein kinase cascade. The amino acid sequence of Byr2's Ras binding domain is only weakly related to that of Raf, and Byr2's three-dimensional structure is unknown. RESULTS: We have solved the 3D structure of the Ras binding domain of Byr2 (Byr2RBD) from Schizosaccharomyces pombe in solution. The structure consists of three alpha helices and a mixed five-stranded beta pleated sheet arranged in the topology betabetaalphabetabetaalphabetaalpha with the first seven canonic secondary structure elements forming a ubiquitin superfold. 15N-(1)H-TROSY-HSQC spectroscopy of the complex of Byr2RBD with Ras*Mg(2+)*GppNHp reveals that the first and second beta strands and the first alpha helix of Byr2 are mainly involved in the protein-protein interaction as observed in other Ras binding domains. Although the putative interaction site of H-Ras from human and Ras1 from S. pombe are identical in sequence, binding to Byr2 leads to small but significant differences in the NMR spectra, indicating a slightly different binding mode. CONCLUSIONS: The ubiquitin superfold appears to be the general structural motif for Ras binding domains even in cases with vanishing sequence identity. However, details of the 3D structure and the interacting interface are different, thereby determining the specifity of the recognition of Ras and Ras-related proteins.     

Conformational plasticity of the lipid transfer protein SCP2

The nonspecific lipid transfer protein sterol carrier protein 2 (SCP2) is involved in organellar fatty acid metabolism. A hydrophobic cavity in the structure of SCP2 accommodates a wide variety of apolar ligands such as cholesterol derivatives or fatty acyl-coenzyme A (CoA) conjugates. The properties of this nonspecific lipid binding pocket are explored using NMR chemical shift perturbations, paramagnetic relaxation enhancement, amide hydrogen exchange, and 15N relaxation measurements. A common binding cavity shared by different physiological ligands is identified. NMR relaxation measurements reveal that residues in the three C-terminal alpha-helices within the lipid binding region exhibit mobility at fast (picosecond to nanosecond) and slow (microsecond to millisecond) time scales. Ligand binding is associated with a considerable loss of peptide backbone mobility. The observed conformational dynamics in SCP2 may play a role for the access of hydrophobic ligands to an occluded binding pocket. The C-terminal peroxisomal targeting signal of SCP2 is specifically recognized by the Pex5p receptor protein, which conducts cargo proteins toward the peroxisomal organelle. Neither the C-terminal targeting signal nor the N-terminal precursor sequence interferes with lipid binding by SCP2. The alpha-helices involved in lipid binding also mediate a secondary interaction interface with the Pex5p receptor. Silencing of conformational dynamics of the peptide backbone in these helices upon either lipid or Pex5p binding might communicate the loading state of the cargo protein to the targeting receptor.     

NMR solution structure of the archaebacterial chromosomal protein MC1 reveals a new protein fold

The three-dimensional structure of methanogen chromosomal protein 1 (MC1), a chromosomal protein extracted from the archaebacterium Methanosarcina sp. CHTI55, has been solved using (1)H NMR spectroscopy. The small basic protein MC1 contains 93 amino acids (24 basic residues against 12 acidic residues). The main elements of secondary structures are an alpha helix and five beta strands, arranged as two antiparallel beta sheets (a double one and a triple one) packed in an orthogonal manner forming a barrel. The protein displays a largely hydrophilic surface and a very compact hydrophobic core made up by side chains at the interface of the two beta sheets and the helix side facing the interior of the protein. The MC1 solution structure shows a globular protein with overall dimensions in the range of 34-40 A, which potentially corresponds to a DNA-binding site of 10-12 base pairs. The presumed DNA-binding site is located on the sequence comprising residues K62-P82, which is formed by a part of strands II2 and II3 belonging to the triple-stranded antiparallel beta sheet and a loop flanked by prolines P68 and P76. The tryptophan W74 that is expected to play a key role in the DNA-binding according to photocross-linking experiments was found completely exposed to the solvent, in a good position to interact with DNA. The overall fold of MC1, characterized by its linking beta-beta-alpha-beta-beta-loop-beta, is different from other known DNA-binding proteins. Its structure suggests a different DNA-binding mode than those of the histone-like proteins HU or HMGB. Thus, MC1 may be classified as a member of a new family.     

Solution structure of the SEA domain from the murine homologue of ovarian cancer antigen CA125 (MUC16)

Human CA125, encoded by the MUC16 gene, is an ovarian cancer antigen widely used for a serum assay. Its extracellular region consists of tandem repeats of SEA domains. In this study we determined the three-dimensional structure of the SEA domain from the murine MUC16 homologue using multidimensional NMR spectroscopy. The domain forms a unique alpha/beta sandwich fold composed of two alpha helices and four antiparallel beta strands and has a characteristic turn named the TY-turn between alpha1 and alpha2. The internal mobility of the main chain is low throughout the domain. The residues that form the hydrophobic core and the TY-turn are fully conserved in all SEA domain sequences, indicating that the fold is common in the family. Interestingly, no other residues are conserved throughout the family. Thus, the sequence alignment of the SEA domain family was refined on the basis of the three-dimensional structure, which allowed us to classify the SEA domains into several subfamilies. The residues on the surface differ between these subfamilies, suggesting that each subfamily has a different function. In the MUC16 SEA domains, the conserved surface residues, Asn-10, Thr-12, Arg-63, Asp-75, Asp-112, Ser-115, and Phe-117, are clustered on the beta sheet surface, which may be functionally important. The putative epitope (residues 58-77) for anti-MUC16 antibodies is located around the beta2 and beta3 strands. On the other hand the tissue tumor marker MUC1 has a SEA domain belonging to another subfamily, and its GSVVV motif for proteolytic cleavage is located in the short loop connecting beta2 and beta3.     

Molecular structure of an apolipoprotein determined at 2.5-A resolution

The three-dimensional structure of an apolipoprotein isolated from the African migratory locust Locusta migratoria has been determined by X-ray analysis to a resolution of 2.5 A. The overall molecular architecture of this protein consists of five long alpha-helices connected by short loops. As predicted from amino acid sequence analyses, these helices are distinctly amphiphilic with the hydrophobic residues pointing in toward the interior of the protein and the hydrophilic side chains facing outward. The molecule falls into the general category of up-and-down alpha-helical bundles as previously observed, for example, in cytochrome c'. Although the structure shows the presence of five long amphiphilic alpha-helices, the alpha-helical moment and hydrophobicity of the entire molecule fall into the range found for normal globular proteins. Thus, in order for the amphiphilic helices to play a role in the binding of the protein to a lipid surface, there must be a structural reorganization of the protein which exposes the hydrophobic interior to the lipid surface. The three-dimensional motif of this apolipoprotein is compatible with a model in which the molecule binds to the lipid surface via a relatively nonpolar end and then spreads on the surface in such a way as to cause the hydrophobic side chains of the helices to come in contact with the lipid surface, the charged and polar residues to remain in contact with water, and the overall helical motif of the protein to be maintained.     

Structure of Bombyx mori chemosensory protein 1 in solution

Chemosensory Proteins (CSPs) represent a family of conserved proteins found in insects that may be involved in chemosensory functions. BmorCSP1 is expressed mainly in antennae and legs of the silkworm moth Bombyx mori and was cloned from antennal cDNA. Here we report the determination of the structure of Bombyx mori CSP1 (BmorCSP1) by NMR. The overall fold of BmorCSP1 is globular and comprises six alpha-helices. These helices span residues 10-14, 17-27, 35-49, 57-72, 75-85, and 92-100. The internal hydrophobic sides of the helices are formed mostly by leucine and isoleucine residues and, therefore, well suited to constitute a binding site for hydrophobic ligands.