The use of trans-4-cotininecarboxylate to construct a polymeric copper(II) azido complex: Hydro(solvo)thermal synthesis, structure and magnetic properties

A new pyridyl-carboxylate ligand, the anion of trans-4-cotininecarboxylic acid, HL, 1, has been used to prepare a new polymeric copper(II) complex, [CuLN₃]_2n, 2, based on a [CuLN₃]₂ dimeric building block. The single crystal structures of both 1 and 2 have been determined and 1 has been found to be in its zwitterionic configuration. The structure of 2 is a one-dimensional tape-like polymeric structure based on an end-on azido-bridged binuclear [Cu₂N₃]₂ backbone moiety. Magnetic studies reveal that 2 is close to paramagnetic from 2 to 300 K with a Curie constant of 1.094 emu K/mol, a Weiss temperature of 0.73 K and a corresponding μ_eff of 2.09 μ_B. A fit of χ_MT for 2 with S₁ = S₂ = ½, yields g = 2.441(6), J = −0.49(3) cm⁻¹, zJ = −0.38(2) cm⁻¹ and N(α) = 0.00053(12) emu/mol, a fit that indicates the presence of both very weak intramolecular intrachain antiferromagnetic exchange coupling within the one-dimensional tape-like chains and very weak interchain antiferromagnetic exchange coupling between these chains.     

Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Copper(II) complexes derived from tripodal tris[(2-ethyl-(1-pyrazolyl)]amine

Three mono-nuclear copper(II) complexes [Cu(tepza)X]ClO₄ (X = Cl, 1; X = NCS, 2; X = dca, 3) and two dinuclear bridging complexes [Cu₂(tepza)₂(μ-C₄O₄)](ClO₄)₂·H₂O(4) and [Cu₂(tepza)₂(μ-C₅O₅)](ClO₄)₂(5) where tepza = tris[2-ethyl(1-pyrazolyl)]amine, dca = dicyanamide, C₄O₄²⁻ = 3,4-dihydroxycyclobut-3-ene-1,2-dionate (squarate dianion) and C₅O₅²⁻ = 4,5-dihydroxycyclopent-4-ene-1,2,3-trionate (croconate dianion) were synthesized and structurally characterized by IR and UV-Vis spectroscopy as well as by single X-ray crystallography. In the solid state, the geometry of copper(II) centers in these complexes are as follows: close to SP in 2, distorted TBP in 3, predominant SP in 4, and distorted octahedral in 5, whereas in solution distorted SP geometry was generally found. The squarato and the croconato dianions in complexes 4 and 5 are bridging the two copper(II) centers in cis-bis-monodentate and bis-bidentate bonding modes, respectively. Magnetic susceptibility measurements at variable temperatures (2-300 K) reveal the weak antiferromagnetic coupling in the two bridging dinuclear complexes 4 (J = −24.9 cm⁻¹) and 5 (J = −3.1 cm⁻¹).     

Synthesis, crystal structure and magnetic properties of new dinuclear Mn(III) compounds with 4-ClC6H4COO and 4-BrC6H4COO bridges

Four new dinuclear Mn(III) compounds have been synthesised: [{Mn(bpy)(H₂O)}₂(μ-4-ClC₆H₄COO)₂(μ-O)}](ClO₄)₂ (1), [{Mn(EtOH)(phen)}₂(μ-O)(μ-4-ClC₆H₄COO)₂](ClO₄)₂ (2), [{Mn(bpy)(EtOH)}(μ-4-BrC₆H₄COO)₂(μ-O){Mn(bpy)(ClO₄)](ClO₄) (3) and [{Mn(H₂O)(phen)}₂(μ-4-BrC₆H₄COO)₂(μ-O)](ClO₄)₂ (4). The crystal structures of 2 and 3 are evidence for the tendency of the ethanol and the perchlorate to act as ligands. Due to the coordination of these groups, the environment of the manganese ions is elongated in the monodentate ligand direction, and this distortion is more important when this ligand is the perchlorate. The magnetic properties of the four compounds have been analysed: compounds 1, 3 and 4 show antiferromagnetic behaviour, with J = −6.33 cm⁻¹ for 1, J = −6.76 cm⁻¹ for 3 and J = −3.08 cm⁻¹ for 4 (H = −JS₁·S₂), while compound 2 shows a very weak ferromagnetic coupling. For this compound, at low temperature the most important effect on the χ_MT data is the zero-field splitting of the ion, and the best fit was obtained with |D_Mn| = 2.38 cm⁻¹ and |E_Mn| = 0.22 cm⁻¹.     

Synthesis, structure, and magnetic properties of dinuclear nickel(II) complexes with a phenol-based dinucleating ligand with four methoxyethyl chelating arms

Dinuclear nickel(II) complexes [Ni₂(bomp)(MeCO₂)₂]BPh₄ (1) and [Ni₂(bomp)(PhCO₂)₂]BPh₄ (2) were synthesized with the dinucleating ligand 2,6-bis[bis(2-methoxyethyl)aminomethyl]-4-methylphenol [H(bomp)]. X-Ray analysis revealed that the complex 1 · 0.5CHCl₃ contains two nickel(II) ions bridged by phenolic oxygen and two acetate groups, forming a μ-phenoxo-bis(μ-acetato)dinickel(II) core. Electronic spectra were investigated for 1 and 2 in the range of 400-1800 nm, and the data were typical for the octahedral high-spin nickel(II) complexes. Obtained spectral components were well simulated based on the angular overlap model assuming the trigonally distorted octahedral geometry. Magnetic susceptibility was measured for 1 and 2 over a temperature range of 4.5-300 K. The optimized magnetic data were J = 1.75 cm⁻¹, zJ′ = −0.234 cm⁻¹, g = 2.21, D = 15.1 cm⁻¹, and TIP = 370 × 10⁻⁶ cm⁻¹ for complex 1 and J = 3.55 cm⁻¹, zJ′ = −0.238 cm⁻¹, g = 2.23, D = 21.8 cm⁻¹, and TIP = 470 × 10⁻⁶ cm⁻¹ for complex 2. The data revealed ferromagnetic interactions between the two nickel(II) ions.     

Synthesis, structure, sorption and magnetic properties of Ni(II) and Cu(II) complexes with thiosemicarbazone of 2-hydroxybenzaldehyde, bridged by 4,4′-bipyridine

(ML)₂(bipy) complexes (LH₂ = thiosemicarbazone of 2-hydroxybenzaldehyde, bipy = 4,4′-bipyridine, M = Ni(II), 1, or Cu(II), 2) were synthesized and characterized by X-ray crystallography. Compound 1 possessed porous structure due to peculiarities of crystal packing, whereas 2 formed infinite zig-zag chains with dense non-porous packing. It was shown that 1 absorbed 0.013 cm³/g of methanol vapor in two steps. Complex 1 was diamagnetic; for 2, the dependency of χ versus T could be interpreted by Bleaney-Bowers expression in 20-300 K temperature range (J = −6.8 cm⁻¹, g = 2.07).     

Construction of carbon chains on ruthenium and osmium carbonyl clusters

We have used the elimination of AuX(PR₃) (X = halide, R = Ph, tol) that occurs in reactions of alkynylgold(I)-phosphine complexes with M₃(μ-H)₃ (μ₃-CBr) (CO)₉ (M = Ru, Os) to prepare the complexes M₃(μ-H)₃(μ₃-CCCR)(CO)₉ [M = Ru, R = Ph 2, CCSiMe₃3, Fc 4, CCFc 6-Ru, CC[Ru(PPh₃)₂Cp] 8; M = Os, R = CCFc 6-Os, CCCCFc 7], Fc′{(μ₃-CCC)Ru₃(μ-H)₃(CO)₉}₂5, and bis-cluster-capped carbon chain complexes {M₃(μ-H)₃(CO)₉}₂{μ₃:μ₃-C(CC)_nC} (M = Ru, n = 2 9, 3 10-Ru; M = Os, n = 3 10-Os) and {(L)(OC)₈(μ-H)₃M₃}C(CC)_nC{Co₃(μ-dppm)(CO)₇} (n = 1, M = Ru, L = CO 11, PPh₃12-Ru/P; n = 2, L = CO 12-Ru, PPh₃13; M = Os, L = CO 12-Os) in good to excellent yields. X-ray structural determinations of 2-5, 6-Ru, 6-Os, 7, 9, 11, 12-Ru, 12-Os and 12-Ru/P are reported.     

Binuclear manganese(III) complexes of an unsymmetric pyrazolate-based compartmental ligand with hard donor set

The synthesis, crystal structure and magnetic properties of manganese(III) binuclear complexes [Mn^III₂(L-3Н)₂(CH₃ОH)₄]·2CH₃ОH (1) and [Mn^III₂(L-3Н)₂(Py)₄]·2Py (2) (L = 3-[(1E)-N-hydroxyethanimidoyl]-4-methyl-1H-pyrazole-5-carboxylic acid) are reported. The ligand contains two distinct donor compartments formed by the pyrazolate-N and the oxime or the carboxylic groups. The complexes were characterized by X-ray single crystal diffraction, revealing that both 1 and 2 consist of dinuclear units in which the two metal ions are linked by double pyrazolate bridges with a planar {Mn₂N₄} core. Cryomagnetic measurements show antiferromagnetic interaction with g = 1.99, J = −3.6 cm⁻¹, Θ = −2.02 K for 1 and g = 2.00, J = −3.7 cm⁻¹, Θ = 1.43 K for 2.     

Coordination chemistry of pyrazolylbis((alkylthio)methyl)borates: Hybrid nitrogen and sulfur donor ligands

The synthesis of iron(II), cobalt(II) and nickel(II) complexes supported by chelating borate ligands containing one pyrazole and two thioethers, phenyl(pyrazolyl)bis((alkylthio)methyl)borates, [Ph(pz)Bt^R], is described. The six-coordinate complexes [Ph(pz)Bt]₂M, M = Fe (1Fe), Co (1Co) and Ni (1Ni), form exclusively the cis isomers as confirmed by X-ray diffraction analyses. Whereas 1Co and 1Ni are high spin, 1Fe exhibits a room temperature magnetic moment, μ_eff = 4.1 μ_B, consistent with spin-crossover behavior. Quantitative analysis of the electronic spectrum of 2Ni leads to a value of D_q = 1086 cm⁻¹, reflective of a ligand field strength somewhat weaker than those imposed by the related tridentate borate ligands Tp or PhTt. Replacement of the methylthioether substituent with the sterically more demanding tert-butylthioether leads to the isolation of [Ph(pz)Bt^tBu]MX, M = Co, X = Cl (2Co); M = Ni, X = Cl (2Ni) or acac (3). The solid state structures of 2Co and 2Ni are chloride-bridged dimers. Additional high-spin cobalt(II) complexes, accessible under distinct preparative conditions, [κ²-Ph(pzH)Bt^tBu] CoCl₂·THF (4) and [κ²-Ph(pz)Bt^tBu]₂Co (5), have been fully characterized.     

Pregnenolone derivatives as potential anticancer agents

Pregnenolone (1) was used as a template to develop new anticancer compounds. Ring-D modification of 1 resulted in the synthesis of benzylidenes 2-17, pyrazolines 18-76, pyrazoles 85-91, hydrazones 77-84, and oximes 92-107 derivatives. The structure of compound 107 was also deduced through single crystal X-ray diffraction studies. The inclusion of furanyl and pyridyl rings to pregnenolone skeleton increases the cytotoxicity of all compounds significantly. Among benzylidene derivatives, only heterocyclic enone 8 (IC₅₀ = 0.74 μM/mL against HepG2), and 17 (IC₅₀ = 4.49 μM/mL against HepG2, IC₅₀ = 5.01 μM/mL against MDA-MB-230 cancer cell line) exhibited a significant activity. The cytotoxicity data of pyrazoline derivatives 18-76 revealed that only furanyl bearing pyrazolines 40, 42-44, 48, and 49 exhibited significant activities. While all (O-carboxymethyl) oximes, hydazones, and pyrazoles derivatives of pregnenolone did not show any significant activity against both the cell lines. Thus the furanyl bearing enone 8 (IC₅₀ = 0.74 μM/mL against HepG2), and its pyrazoline derivative 48 (IC₅₀ = 0.91 μM/mL against MDA-MB-230 cancer cell lines) were identified as the most active compounds in all derivatives of pregnenolone.     

Neighbouring metal induced oxidative addition at the iron centre amongst the iron-arylpyridylphosphine complexes

Complexes of the type (η⁴-BuC₅H₅)Fe(CO)₂(P) (P = PPh₂Py 3, PPhPy₂4, PPy₃5; Py = 2-pyridyl) were satisfactorily prepared. Upon treatment of 3 with M(CO)₃(EtCN)₃ (M = Mo, 6a; W, 6b), the pyridyl N-atom could be coordinated to the metal M, which then eliminates a CO ligand from the Fe-centre and induced an oxidative addition of the endo-C-H of (η⁴-BuC₅H₅). This results in a bridged hydrido heterodimetallic complex [(η⁵-BuC₅H₄)Fe(CO)(μ-P,N-PPh₂Py)(μ-H)M(CO)₄] (M = Mo, 7a, 81%; W, 7b, 76%). The reaction of 4 or 5 with 6a,b did not give the induced oxidative addition, although these complexes contain more than one pyridyl N-atom. The reaction of 4 with M(CO)₄(EtCN)₂ (M = Mo, 9a; W, 9b) produced heterodimetallic complexes [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′-PPhPy₂)M(CO)₄] (M = Mo, 10a, 81%; W, 10b, 83%). Treatment of 5 with 6a,b gave [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′,N″-PPy₃)M(CO)₃] (M = Mo, 12a, 96%; W, 12b, 78%).     

Syntheses and characterization of titanium malonato and amino acid complexes: [Ti(cp)2(OOCCH2NMe2)] - The first structurally characterized α-amino acid titanium(III) complex

The reaction of [Ti(cp^∗)₂(BTMSA)] (1) (cp^∗ = η⁵-C₅Me₅, BTMSA = bis(trimethylsilyl)acetylene) with malonic acids ((HOOC)₂CR₂, R = H, Me) and N,N-dimethylglycine resulted in the formation of titanium(IV) dicarboxylato complexes [Ti(cp^∗)₂{(OOC)₂CR₂}] (R = H, 2; R = Me, 3) and an α-amino acid titanium(III) complex [Ti(cp^∗)₂(OOCCH₂NMe₂)] (4). The identities of complexes 2-4 were confirmed by microanalysis, ¹H and ¹³C NMR spectroscopy (2, 3), ESI-MS and CID experiments (2, 3) as well as by ESR and magnetic measurements (μ_eff = 1.81, 298 K) for 4. Single X-ray diffraction analyses of 2 and 4 exhibited monomolecular complexes in which the titanium atom is distorted tetrahedrally coordinated by two η⁵-C₅Me₅ rings and by the chelating bound malonato-κ²O,O′ (2) and N,N-dimethylglycinato-κ²O,O′ ligand (4).     

Lewis-base copper(I) formates: Synthesis, reaction chemistry, structural characterization and their use as spin-coating precursors for copper deposition

Consecutive synthesis methodologies for the preparation of a series of copper(I) formates [L_mCuO₂CH] (L = ⁿBu₃P: 4a, m = 1; 4b, m = 2; 5, L = [Ti](CCSiMe₃)₂, m = 1, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and [L_mCuO₂CH·HO₂CR] (L = ⁿBu₃P: 7a, m = 1, R = H; 7b, m = 2, R = H; 7c, m = 2, R = Me; 7d, m = 2, R = CF₃; 7e, m = 2, R = Ph. L = (^cC₆H₁₁)₃P, R = H: 8a, m = 2; 8b, m = 3. L = (CF₃CH₂O)₃P, R = H: 9a, m = 2; 9b, m = 3. L = (CH₃CH₂O)₃P, R = H: 10a, m = 2; 10b, m = 3. L = [Ti](CCSiMe₃)₂; m = 1: 11a, R = H; 11b, R = Ph) is reported using [CuO₂CH] (1) and L (2a, L = ⁿBu₃P; 2b, L (^cC₆H₁₁)₃P; 2c, L = (CF₃CH₂O)₃P; 2d, L = (CH₃CH₂O)₃P; 3, L = [Ti](CCSiMe₃)₂) as key starting materials. Addition of formic acid (6a) or carboxylic acid HO₂CR (6b, R = Me; 6c, R = CF₃; 6d, R = Ph) to the afore itemized copper(I) formates 4 and 5 gave metal-organic or organometallic 7-11. The molecular structures of 8a and 11a in the solid state are reported showing a threefold coordinated copper(I) ion, setup by either two coordinatively-bonded phosphorus atoms and one formate oxygen atom (8a) or two π-bonded alkyne ligands and one oxygen atom (11a). A formic acid molecule is additionally hydrogen-bonded to the CuO₂CH moiety. The use of 7b as suitable precursor for the deposition of copper onto TiN-coated oxidized silicon wafers by the spin-coating process below 300 °C is described. Complex 7b offers an appropriate transformation behavior into metal phase by an elimination-decarboxylation mechanism. The morphology of the copper films strongly depends on the annealing conditions. A closed grain network densified by a post-treatment is obtained (8 °C min⁻¹, N₂/H₂ carrier gas). Hydrogen post-anneal to 420 °C after film deposition gave a copper film showing resistivities from 2.5 to 3.7 μΩ cm. This precursor was also used for gap-filling processes.     

Tl benzene multicarboxylic acid coordination polymers: Structural, thermal and fluorescence studies

[Tl₃(μ-1,2,3-btc)]_n (1,2,3-H₃btc = 1,2,3-benzenetricarboxylic acid) (1), [Tl₂(μ-1,3,5-Hbtc)(H₂O)]_n (1,3,5-H₃btc = 1,3,5-benzenetricarboxylic acid) (2) and [Tl₄(μ-1,2,4,5-btc)]_n (1,2,4,5-H₄btc = 1,2,4,5-benzenetetracarboxylic acid) (3), three new Tl^I coordination polymers have been synthesized, characterized by elemental analysis and IR spectroscopy and their structures determined by single-crystal X-ray diffraction. The thermal stability of compounds 1-3 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The single-crystal X-ray analysis of compounds 1-3 shows that the compounds are structurally diverse showing three-dimensional coordination polymers. The carboxylic groups of the ligands 1,2,3-btc³⁻, 1,3,5-Hbtc²⁻ and 1,2,4,5-btc⁴⁻ in the new Tl^I coordination polymers are not chelated and only act as bridging groups. In compounds 1-3, the lone pair of Tl(I) atoms is ‘active’ in the solid state and the coordination spheres are hemisphere type. Solution state luminescent spectra of compound 2 indicate intense fluorescent emissions at ca. 400 nm.     

Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.     

Synthesis, characterization, and magnetic study of pyrazine bridged polymeric complexes of copper(II)

The synthesis, structural characterization and magnetic property of two new coordination polymers [Cu(pyz)(μ-CH₃CO₂)₄]_n (1) and [Cu(pyz)(μ-CCl₃CO₂)₄]_n (2) (pyz = pyrazine) are reported. Here, the carboxylato bridged two dinuclear copper(II) complexes are linked through pyrazine giving a 1-D alternating chain. The magnetic property of the complexes indicates a significant difference originated from the introduction of electron withdrawing substituent on the bridging dicarboxylate. Complex 1 exhibits strong antiferromagnetic interactions with J = −344.61 cm⁻¹, whereas 2 exhibits comparatively less strong antiferromagnetic coupling with J = −238.53 cm⁻¹.     

Diverse coordination of polynuclear copper(II) complexes constructed from benzene tetracarboxylates

The reaction of aqueous solutions of the preformed 1:1 Cu(ClO₄)₂-polydentate amine with tetrasodium 1,2,4,5-benzene tetracarboxylate (Na₄bta) afforded three different types of polynuclear compounds. These include the tetranuclear complexes: [Cu₄(Medpt)₄(μ₄-bta)(ClO₄)₂(H₂O)₂](ClO₄)₂·2H₂O (1), [Cu₄(pmdien)₄(μ₄-bta)(H₂O)₄](ClO₄)₄ (2), [Cu₄(Mepea)₄(μ₄-bta)(H₂O)₂](ClO₄)₄(3), [Cu₄(TPA)₄(μ₄-bta)](ClO₄)₄·10H₂O (4) and [Cu₄(tepa)₄(μ₄-bta)](ClO₄)₄·2H₂O (5), the di-nuclear: [Cu₂(DPA)₂(μ₂-bta)(H₂O)₂]·4H₂O (6), [Cu₂(dppa)₂(μ₂-bta)(H₂O)₂]·4H₂O (7) and [Cu₂(pmea)₂(μ₂-bta)]·14H₂O (8) and the trinuclear complex [Cu₃(dppa)₃(μ₃-bta)(H₂O)_2.25](ClO₄)₂·6.5H₂O (9) where Medpt = 3,3′-diamino-N-methyldipropylamine, pmedien = N,N,N′,N″,N″-pentamethyldiethylenetriamine, Mepea = [2-(2-pyridyl)ethyl]-(2-pyridylmethyl)methylamine, TPA = tris(2-pyridylmethyl)amine, tepa = tris[2-(2-pyridyl)ethyl)]amine, DPA = di(2-pyridymethyl)amine, dppa = N-propanamide-bis(2-pyridylmethyl)amine and pmea = bis(2-pyridylmethyl)-[2-(2-pyridylethyl)]amine. The complexes were structurally characterized by elemental analyses, spectroscopic techniques, and by X-ray crystallography for complexes 1, 2, 4, 6, 7 and 9. X-ray structure of the complexes reveal that bta⁴⁻ is acting as a bridging ligand via its four deprotonated caboxylate groups in 1, 2 and 4, three carboxylate groups in 9 and via two trans-carboxylates in 6 and 7. The complexes exhibit extended supramolecular networks with different dimensionality: 1-D in 2 and 4 due to hydrogen bonds of the type O-H···O, 2-D in 1 and 7, and 3-D network in 6 as a result of hydrogen bonds of the types N-H···O and O-H···O. Magnetic susceptibility measurements showed very weak antiferromagnetic coupling between the Cu^II ions in 1-5, 7-9 (|J| = 0.02-0.87 cm⁻¹) and weak ferromagnetic coupling for 6 (J = 0.08 cm⁻¹).     

The influence of substituents (R) at N atom of thiophene-2-carbaldehyde thiosemicarbazones {(C4H3S)HCN-N(H)-C(S)NHR} on bonding, nuclearity and H-bonded networks of copper(I) complexes

The nuclearity, bonding and H-bonded networks of copper(I) halide complexes with thiophene-2-carbaldehyde thiosemicarbazones {(C₄H₃S)HC²N³-N(H)-C¹(S)N¹HR} are influenced by R substituents at N¹ atom. Thiophene-2-carbaldehyde-N¹-methyl thiosemicarbazone (HttscMe) or thiophene-2-carbaldehyde-N¹-ethyl thiosemicarbazone (HttscEt) have yielded halogen-bridged dinuclear complexes, [Cu₂(μ-X)₂(η¹-S-Htsc)₂(Ph₃P)₂] (Htsc, X: HttscMe, I, 1; Br, 2; Cl, 3; HttscEt, I, 4; Br, 5; Cl, 6), while thiophene-2-carbaldehyde-N¹-phenyl thiosemicarbazone (HttscPh) has yielded mononuclear complexes, [CuX(η¹-S-HttscPh)₂] (X, I, 7a; Br 8; Cl, 9) and a sulfur bridged dinuclear complex, [Cu₂(μ-S-HttscPh)₂(η¹-S-HttscPh)₂I₂] 7b co-existing with 7a in the same unit cell. These results are in contrast to S-bridged dimers [Cu₂(μ-S-Httsc)₂(η¹-Br)₂(Ph₃P)₂] · 2H₂O and [Cu₂(μ-S-Httsc)₂(η¹-Cl)₂(Ph₃P)₂] · 2CH₃CN obtained for R = H and X = Cl, Br (Httsc = thiophene-2-carbaldehyde thiosemicarbazone) as reported earlier. The intermolecular CH_Ph?π interaction in 1-3 (2.797 Å, 1; 3.264 Å, 2; 3.257 Å, 3) have formed linear polymers, whereas the CH_Ph?X and N³?HCH interactions in 4-6 (2.791, 2.69 Å, 5; 2.776, 2.745 Å, 6, respectively) have led to the formation of H-bonded 2D polymer. The PhN¹H?π, interactions (2.547 Å, 8, 2.599 Å, 9) have formed H-bonded dimers only. The Cu?Cu separations are 3.221-3.404 Å (1-6).     

Dinuclear terephthalato-bridged nickel(II) complexes. Structural characterization and magnetic properties

The dinuclear terephthalato-bridged nickel(II) complexes [Ni₂(cyclen)₂(μ-tp)](ClO₄)₂ (1) [Ni₂(trpn)₂(μ-tp)(H₂O)₂](ClO₄)₂ (2) and [Ni₂(3,3,3-tet)₂(μ-tp)(H₂O)₂](ClO₄)₂ · 2H₂O (3), where tp = terephthalate dianion, cyclen = 1,4,7,10-tetraazacyclododecane, trpn = tris(3-aminopropyl)amine and 3,3,3-tet = 1,5,9,13-tetraazatridecane, were synthesized and structurally characterized by X-ray crystallography. Their magnetic susceptibilities were also determined at variable temperatures over the range 2-300 K. The structures of these complexes consist of μ-tp bridging two Ni(II) centers in a bis(bidentate) bonding fashion in 1 and in bis(monodentate) bonding fashion in 2 and 3. The coordination geometry around the Ni(II) ions in these compounds has a distorted octahedral geometry with four nitrogen atoms from the amine ligand (cyclen, trpn or 3,3,3-tet) and two coordinated oxygen atoms supplied by the chelated carboxylate group of the bridged terephthalate ligand in 1, and by one tp-carboxylate-oxygen in 2 and 3. The sixth coordination site in the last two complexes 2 and 3 is achieved via an oxygen atom from a coordinated water molecule. The intradimer Ni…Ni distances in these complexes are 10.740, 11.428 and 11.537 Å for 1, 2 and 3, respectively. The electronic spectra of the complexes in aqueous solutions are in complete agreement with the assigned X-ray geometry around the Ni(II) centers. Also, the analysis of the infrared spectral data for the ν(COO⁻) stretching frequencies of the tp-carboxalato groups reveals the existence of the bis(bidentate) and bis(monodentate) coordination modes for the bridged terephthalate ligand in 1, 2 and 3, respectively. Despite the different coordination modes of the tp bridging ligand in these complexes, they all exhibit very weak antiferromagnetic coupling. The coupling constants J were found to be −2.2, −0.6 and −1.5 cm³ K mol⁻¹ for the complexes 1, 2 and 3, respectively. The structural and magnetic results of 1-3 are discussed in relation to the other related published μ-terephthalato dinuclear Ni(II) compounds.     

Dioxovanadium(V) and μ-oxo bis[oxovanadium(V)] complexes containing thiosemicarbazone based ONS donor set and their antiamoebic activity

Neutral dioxovanadium (V) complexes [VO₂(HL)] (H₂L = I: 1, H₂L = II: 2 and H₂L = III: 3; H₂L are the thiosemicarbazones H₂pydx-tsc (I), H₂pydx-chtsc (II) and H₂pydx-clbtsc (III); pydx = pyridoxal, tsc = thiosemicarbazide, chtsc = N₄-cyclohexylthiosemicarbazide, clbtsc = N₄-(2-chloro)benzylthiosemicarbazide) have been isolated and characterised on the basis of elemental and electrochemical analyses, spectroscopic (IR, UV-Vis, ¹H and ⁵¹V NMR) data, thermogravimetric studies and reactivity patterns. These complexes are stable in solution at ambient temperature but heating of the methanolic solutions yields the μ-oxo binuclear complexes [(VOL)₂μ-O] (H₂L = I: 4, H₂L = II: 5, H₂L = III: 6). Treatments of dioxo species with H₂O₂ yield oxoperoxo species, the formations of which have been established spectrophotometrically. Similarly, the formations of oxohydroxo species, an intermediate proposed during the catalytic action of haloperoxidases, have also been established in solution by treating 1, 2 and 3 with a methanolic solution of HCl. The antiamoebic activities were carried out to ascertain the effectiveness of dioxovanadium(V) and μ-oxobis(oxovanadium(V)) complexes in comparison to their corresponding thiosemicarbazones. These complexes possess noteworthy potencies against HM1:1MSS strain of Entamoeba histolytica. Complexes 2, 3, 5 and 6 showed less IC₅₀ values than metronidazole, indicating that these metal thiosemicarbazones may be the lead molecules to inhibit the growth of E. histolytica. Within the series, complex 5 showed the most promising amoebicidal activity (IC₅₀ = 0.5 μM versus IC₅₀ = 1.8 of metronidazole).