Catalysis by human leukocyte elastase: mechanistic insights into specificity requirements

Steady-state kinetic parameters were determined for the human leukocyte elastase catalyzed hydrolysis of a series of peptide-based thiobenzyl esters and p-nitroanilides. The peptide units are MeOSuc-Val, MeOSuc-Alan-Pro-Val (n = 0-2), and MeOSuc-Alan-Pro-Ala (n = 1 or 2). The results of this study suggest five important mechanistic features for HLE. Few important remote subsite contacts are established in the Michaelis complex. Full recognition and tight binding of the substrate occurs in the transition state for acylation. The P3-S3 interaction is critical during acylation. Subsite contacts are unimportant in deacylation. P1 specificity is regulated by peptide length. An important steady-state kinetic consequence of this specificity is that the rate-limiting step of kc for p-nitroanilide hydrolysis changes from acylation to deacylation as the peptide chain is lengthened.     

Deacylation transition states of a bacterial DD-peptidase

Beta-lactam antibiotics restrict bacterial growth by inhibiting DD-peptidases. These enzymes catalyze the final transpeptidation step in bacterial cell wall biosynthesis. Although much structural information is now available for these enzymes, the mechanism of the actual transpeptidation reaction has not been studied in detail. The reaction is known to involve a double-displacement mechanism with an acyl-enzyme intermediate, which can be attacked by water, specific amino acids, peptides, and other acyl acceptors. We describe in this paper an investigation of acyl acceptor specificity and assess the need for general base catalysis in the deacylation transition state of the Streptomyces R61 DD-peptidase. We show, by the criterion of solvent deuterium kinetic isotope effect measurements and proton inventories, that the transition states of specific and nonspecific substrates are very similar, at least with respect to proton motion. The transition states for attack (tetrahedral intermediate formation) by d-amino acids and Gly-l-Xaa dipeptides do not include a general base catalyst, while such catalysis is essential for reaction with water and d-alpha-hydroxy acids. D-Alpha-hydroxy acids act as acyl acceptors for glycyl substrates but not for more specific d-alanyl substrates; hydroxy acids actually behave, more generally, as mixed inhibitors of the DD-peptidase. The structural and mechanistic bases of these observations are discussed; they should inform transition state analogue design.     

Investigation of the active center of rat pancreatic elastase

We have isolated rat pancreatic elastase I (EC 3.4.21.36) using a fast two-step procedure and we have investigated its active center with p-nitroanilide substrates and trifluoroacetylated inhibitors. These ligands were also used to probe porcine pancreatic elastase I whose amino acid sequence is 84% homologous to rat pancreatic elastase I as reported by MacDonald, et al. (Biochemistry 21, (1982) 1453-1463). Both proteinases exhibited non-Michaelian kinetics for substrates composed of three or four residues: substrate inhibition was observed for most enzyme substrate pairs, but with Ala3-p-nitroanilide, rat elastase showed substrate inhibition, whereas porcine elastase exhibited substrate activation. With most of the longer substrates, Michaelian kinetics were observed. The kcat/Km ratio was used to compare the catalytic efficiency of the two elastases on the different substrates. For both elastases, occupancy of subsite S4 was a prerequisite for efficient catalysis, occupancy of subsite S5 further increased the catalytic efficiency, P2 proline favored catalysis and P1 valine had an unfavorable effect. Rat elastase has probably one more subsite (S6) than its porcine counterpart. The rate-limiting step for the hydrolysis of N-succinyl-Ala3-p-nitroanilide by rat elastase was essentially acylation, whereas both acylation and deacylation rate constants participated in the turnover of this substrate by porcine elastase. For both enzymes, trifluoroacetylated peptides were much better inhibitors than acetylated peptides and trifluoroacetyldipeptide anilides were more potent than trifluoroacetyltripeptide anilides. A number of quantitative differences were found, however, and with one exception, trifluoroacetylated inhibitors were less efficient with rat elastase than with the porcine enzyme.     

Chemical mechanism of homoisocitrate dehydrogenase from Saccharomyces cerevisiae

Homoisocitrate dehydrogenase (HIcDH, 3-carboxy-2-hydroxyadipate dehydrogenase) catalyzes the fourth reaction of the alpha-aminoadipate pathway for lysine biosynthesis, the conversion of homoisocitrate to alpha-ketoadipate using NAD as an oxidizing agent. A chemical mechanism for HIcDH is proposed on the basis of the pH dependence of kinetic parameters, dissociation constants for competitive inhibitors, and isotope effects. According to the pH-rate profiles, two enzyme groups act as acid-base catalysts in the reaction. A group with a p K a of approximately 6.5-7 acts as a general base accepting a proton as the beta-hydroxy acid is oxidized to the beta-keto acid, and this residue participates in all three of the chemical steps, acting to shuttle a proton between the C2 hydroxyl and itself. The second group acts as a general acid with a p K a of 9.5 and likely catalyzes the tautomerization step by donating a proton to the enol to give the final product. The general acid is observed in only the V pH-rate profile with homoisocitrate as a substrate, but not with isocitrate as a substrate, because the oxidative decarboxylation portion of the isocitrate reaction is limiting overall. With isocitrate as the substrate, the observed primary deuterium and (13)C isotope effects indicate that hydride transfer and decarboxylation steps contribute to rate limitation, and that the decarboxylation step is the more rate-limiting of the two. The multiple-substrate deuterium/ (13)C isotope effects suggest a stepwise mechanism with hydride transfer preceding decarboxylation. With homoisocitrate as the substrate, no primary deuterium isotope effect was observed, and a small (13)C kinetic isotope effect (1.0057) indicates that the decarboxylation step contributes only slightly to rate limitation. Thus, the chemical steps do not contribute significantly to rate limitation with the native substrate. On the basis of data from solvent deuterium kinetic isotope effects, viscosity effects, and multiple-solvent deuterium/ (13)C kinetic isotope effects, the proton transfer step(s) is slow and likely reflects a conformational change prior to catalysis.     

A proposed proton shuttle mechanism for saccharopine dehydrogenase from Saccharomyces cerevisiae

Saccharopine dehydrogenase [N6-(glutaryl-2)-L-lysine:NAD oxidoreductase (L-lysine forming)] catalyzes the final step in the alpha-aminoadipate pathway for lysine biosynthesis. It catalyzes the reversible pyridine nucleotide-dependent oxidative deamination of saccharopine to generate alpha-Kg and lysine using NAD+ as an oxidizing agent. The proton shuttle chemical mechanism is proposed on the basis of the pH dependence of kinetic parameters, dissociation constants for competitive inhibitors, and isotope effects. In the direction of lysine formation, once NAD+ and saccharopine bind, a group with a pKa of 6.2 accepts a proton from the secondary amine of saccharopine as it is oxidized. This protonated general base then does not participate in the reaction again until lysine is formed at the completion of the reaction. A general base with a pKa of 7.2 accepts a proton from H2O as it attacks the Schiff base carbon of saccharopine to form the carbinolamine intermediate. The same residue then serves as a general acid and donates a proton to the carbinolamine nitrogen to give the protonated carbinolamine. Collapse of the carbinolamine is then facilitated by the same group accepting a proton from the carbinolamine hydroxyl to generate alpha-Kg and lysine. The amine nitrogen is then protonated by the group that originally accepted a proton from the secondary amine of saccharopine, and products are released. In the reverse reaction direction, finite primary deuterium kinetic isotope effects were observed for all parameters with the exception of V2/K(NADH), consistent with a steady-state random mechanism and indicative of a contribution from hydride transfer to rate limitation. The pH dependence, as determined from the primary isotope effect on DV2 and D(V2/K(Lys)), suggests that a step other than hydride transfer becomes rate-limiting as the pH is increased. This step is likely protonation/deprotonation of the carbinolamine nitrogen formed as an intermediate in imine hydrolysis. The observed solvent isotope effect indicates that proton transfer also contributes to rate limitation. A concerted proton and hydride transfer is suggested by multiple substrate/solvent isotope effects, as well as a proton transfer in another step, likely hydrolysis of the carbinolamine. In agreement, dome-shaped proton inventories are observed for V2 and V2/K(Lys), suggesting that proton transfer exists in at least two sequential transition states.     

Catalytic properties of porcine pancreatic elastase: a steady-state and pre-steady-state study

Pre-steady-state and steady-state kinetics for the p.p. elastase-catalysed hydrolysis of ZAlaONp, one of the most favourable substrates for this serine protease, have been studied between pH 4.0 and 8.0. The results are consistent with the minimum three-step mechanism: (formula; see text) Under pre-steady-state conditions, where [E0] much greater than [S0], the values of the dissociation constant of the E X S complex (Ks = k-1/k+1) and of the individual rate constants for the catalytic steps (k+2 and k+3) have been determined over the whole pH range explored. Under steady-state conditions, where [S0] much greater than [E0], the values of kcat and Km have been obtained over the same pH range. The pH profiles of k+2, k+3, k+2/Ks, kcat, kcat/Km reflect the ionization of a group, probably His57, with a pKa value of 6.85 +/- 0.10. The values of Ks and Km are pH independent. The steady-state parameters for the p.p. elastase-catalysed hydrolysis of a number of p-nitrophenyl esters of N-alpha-carbobenzoxy-L-amino acids have been also determined between pH 4.0 and 8.0 and compared with those of b.beta-trypsin and b.alpha-chymotrypsin. For all the substrates examined the acylation step (k+2) is rate limiting in the p.p. elastase catalysis, between pH 4.0 and 8.0. The different catalytic behaviours of p.p. elastase, b.beta-trypsin and b.alpha-chymotrypsin are consistent with the known three-dimensional structures of these serine proteases.     

Enzymatic hydrolysis of p-nitroacetanilide: mechanistic studies of the aryl acylamidase from Pseudomonas fluorescens.

Aryl acylamidase (EC 3.1.5.13; AAA) catalyzes the hydrolysis of p-nitroacetanilide (PNAA) via the standard three-step mechanism of serine hydrolases: binding of substrate (K(s)), acylation of active-site serine (k(acyl)), and hydrolytic deacylation (k(deacyl)). Key mechanistic findings that emerged from this study include that (1) AAA requires a deprotonated base with a pK(a) of 8.3 for expression of full activity toward PNAA. Limiting values of kinetic parameters at high pH are k(c) = 7 s(-1), K(m) = 20 microM, and k(c)/K(m) = 340 000 M(-1) s(-1). (2) At pH 10, where all the isotope effects were conducted, k(c) is equally rate-limited by k(acyl) and k(deacyl). (3) The following isotope effects were determined: (D)()2(O)(k(c)/K(m)) = 1.7 +/- 0.2, (D)()2(O)k(c) = 3.5 +/- 0.3, and (beta)(D)(k(c)/K(m)) = 0.83 +/- 0.04, (beta)(D)k(c) = 0.96 +/- 0.01. These values, together with proton inventories for k(c)/K(m) and k(c), suggest the following mechanism: (i) The initial binding of substrate to enzyme to form the Michaelis complex is accompanied by solvation changes that generate solvent deuterium isotope effects originating from hydrogen ion fractionation at multiple sites on the enzyme surface. (ii) From within the Michaelis complex, the active site serine attacks the carbonyl carbon of PNAA with general-base catalysis to form a substantially tetrahedral transition state enroute to the acyl-enzyme. (iii) Finally, deacylation occurs through a process involving a rate-limiting solvent isotope effect, generating conformational change of the acyl-enzyme that positions the carbonyl bond in a polarizing environment that is optimal for attack by water.     

Glutathione reductase: solvent equilibrium and kinetic isotope effects

Glutathione reductase catalyzes the NADPH-dependent reduction of oxidized glutathione (GSSG). The kinetic mechanism is ping-pong, and we have investigated the rate-limiting nature of proton-transfer steps in the reactions catalyzed by the spinach, yeast, and human erythrocyte glutathione reductases using a combination of alternate substrate and solvent kinetic isotope effects. With NADPH or GSSG as the variable substrate, at a fixed, saturating concentration of the other substrate, solvent kinetic isotope effects were observed on V but not V/K. Plots of Vm vs mole fraction of D2O (proton inventories) were linear in both cases for the yeast, spinach, and human erythrocyte enzymes. When solvent kinetic isotope effect studies were performed with DTNB instead of GSSG as an alternate substrate, a solvent kinetic isotope effect of 1.0 was observed. Solvent kinetic isotope effect measurements were also performed on the asymmetric disulfides GSSNB and GSSNP by using human erythrocyte glutathione reductase. The Km values for GSSNB and GSSNP were 70 microM and 13 microM, respectively, and V values were 62 and 57% of the one calculated for GSSG, respectively. Both of these substrates yield solvent kinetic isotope effects greater than 1.0 on both V and V/K and linear proton inventories, indicating that a single proton-transfer step is still rate limiting. These data are discussed in relationship to the chemical mechanism of GSSG reduction and the identity of the proton-transfer step whose rate is sensitive to solvent isotopic composition. Finally, the solvent equilibrium isotope effect measured with yeast glutathione reductase is 4.98, which allows us to calculate a fractionation factor for the thiol moiety of GSH of 0.456.     

The kinetics of hydrolysis of some extended N-aminoacyl-L-arginine methyl esters by porcine pancreatic kallikrein. A comparison with human plasma Kallikrein.

The effects of subsite interactions in the S2-S4 region [Schechter & Berger (1967) Biochem. Biophys. Res. Commun. 27, 157-162] of porcine pancreatic kallikrein (EC 3.4.21.8) on its catalytic efficiency have been investigated. Kinetic constants (Kcat, Km) have been determined for a series of seven extended N-aminoacyl-L-arginine methyl esters whose sequence is based on either the C-terminal sequence of kallidin (-Pro-Phe-Arg) or (-Gly-)nArg. With these substrates it has been found that neither acylation nor deacylation of the enzyme is rate-limiting. Values of Kcat. range from 21.5 to 2320s-1, indicating that there are interactions with different residues in the N-aminoacyl chain and enzyme subsites in the S2-S4 region. It is shown that possible hydrogen-bonded interactions with the enzyme in the S3-S4 region have a significant effect on catalysis. The presence of L-phenylalanine at P2 has a very large effect on both Kcat, and Km, giving a greatly enhanced catalytic efficiency. Substrates with L-proline at P3 also have a marked effect, but in this case the overall effect is one of lowered catalytic efficiency. By comparison with the results of a similar study with human plasma kallikrein I (EC 3.4.21.8), it has been possible to demonstrate that there are considerable differences in kinetic behaviour between the two enzymes. These are related to relative differences in the rates of acylation and deacylation with ester substrates and also the roles of subsites S2 and S3 of the two enzymes.     

Substrate specificity of a new alkaline elastase from an alkalophilic bacillus

The substrate specificity of alkaline elastase from alkalophilic Bacillus sp. Ya-B was studied by using a number of synthetic substrates. From the relative hydrolysis rate for p-nitrophenyl esters and t-butoxycarbonyl-L-Phe-L-Arg(NO2)-X-L-Phe-p-nitroanilide (X = L-Ala, Val, Leu, Ile, and Gly), the subsite S1 and S2 were concluded to be specific for L-alanine and glycine. The alkaline elastase rapidly hydrolyzed elastase specific substrate succinyl-L-Ala3-p-nitroanilide and succinyl-L-Ala-L-Pro-L-Ala-p-nitroanilide. These results prompted us to characterize our enzyme as a microbial elastase. Inhibition study with carbobenzoxy-L-Phe-chloromethyl ketone (ZPCK), Z-L-Ala-L-Phe-CK (ZAPCK), Z-L-Ala-Gly-L-Phe-CK (ZAGPCK), and kinetic study with succimyl-L-Ala2(3)-p-nitroanilide revealed that the enzyme has at least four subsites.     

Spectral observation of an acyl-enzyme intermediate of lipoprotein lipase

There have been several studies indicating that hydrolysis reactions of fatty acid esters catalyzed by lipases proceed through an acyl-enzyme intermediate typical of serine proteases. In particular, one careful kinetic study with the physiologically important enzyme lipoprotein lipase (LPL) is consistent with rate-limiting deacylation of such an intermediate. To observe the spectrum of acyl-enzyme and study the mechanism of LPL-catalyzed hydrolysis of substrate, we have used a variety of furylacryloyl substrates including 1,2-dipalmitoyl-3-[(beta-2-furylacryloyl)triacyl]glyceride (DPFATG) to study the intermediates formed during the hydrolysis reaction catalyzed by the enzyme. After isolation and characterization of the molecular weight of adipose LPL, we determined its extinction coefficient at 280 nm to quantitate the formation of any acyl-enzyme intermediate formed during substrate hydrolysis. We observed an intermediate at low pH during the enzyme-catalyzed hydrolysis of (furylacryloyl)imidazole. This intermediate builds early in the reaction when a substantial amount of substrate has hydrolyzed but no product, furylacrylate, has been formed. The acyl-enzyme has a lambda max = 305 nm and a molar extinction coefficient of 22,600 M-1 cm-1; these parameters are similar to those for furylacryloyl esters including the serine ester. These data provide the first spectral evidence for a serine acyl-enzyme in lipase-catalyzed reactions. The LPL hydrolysis reaction is base catalyzed, exhibiting two pKa values; the more acidic of these is 6.5, consistent with base catalysis by histidine. The biphasic rates for substrate disappearance or product appearance and the absence of leaving group effect indicate that deacylation of intermediate is rate limiting.     

Uridine phosphorylase from Trypanosoma cruzi: kinetic and chemical mechanisms

The reversible phosphorolysis of uridine to generate uracil and ribose 1-phosphate is catalyzed by uridine phosphorylase and is involved in the pyrimidine salvage pathway. We define the reaction mechanism of uridine phosphorylase from Trypanosoma cruzi by steady-state and pre-steady-state kinetics, pH-rate profiles, kinetic isotope effects from uridine, and solvent deuterium isotope effects. Initial rate and product inhibition patterns suggest a steady-state random kinetic mechanism. Pre-steady-state kinetics indicated no rate-limiting step after formation of the enzyme-products ternary complex, as no burst in product formation is observed. The limiting single-turnover rate constant equals the steady-state turnover number; thus, chemistry is partially or fully rate limiting. Kinetic isotope effects with [1'-(3)H]-, [1'-(14)C]-, and [5'-(14)C,1,3-(15)N(2)]uridine gave experimental values of (α-T)(V/K)(uridine) = 1.063, (14)(V/K)(uridine) = 1.069, and (15,β-15)(V/K)(uridine) = 1.018, in agreement with an A(N)D(N) (S(N)2) mechanism where chemistry contributes significantly to the overall rate-limiting step of the reaction. Density functional theory modeling of the reaction in gas phase supports an A(N)D(N) mechanism. Solvent deuterium kinetic isotope effects were unity, indicating that no kinetically significant proton transfer step is involved at the transition state. In this N-ribosyl transferase, proton transfer to neutralize the leaving group is not part of transition state formation, consistent with an enzyme-stabilized anionic uracil as the leaving group. Kinetic analysis as a function of pH indicates one protonated group essential for catalysis and for substrate binding.     

Mechanistic studies on the mononuclear ZnII-containing metallo-beta-lactamase ImiS from Aeromonas sobria

In an effort to understand the reaction mechanism of a B2 metallo-beta-lactamase, steady-state and pre-steady-state kinetic and rapid freeze quench electron paramagnetic resonance (EPR) studies were conducted on ImiS and its reaction with imipenem and meropenem. pH dependence studies revealed no inflection points in the pH range of 5.0-8.5, while proton inventories demonstrated at least 1 rate-limiting proton transfer. Site-directed mutagenesis studies revealed that Lys224 plays a catalytic role in ImiS, while the side chain of Asn233 does not play a role in binding or catalysis. Stopped-flow fluorescence studies on ImiS, which monitor changes in tryptophan fluorescence on the enzyme, and its reaction with imipenem and meropenem revealed biphasic fluorescence time courses with a rate of fluorescence loss of 160 s(-)(1) and a slower rate of fluorescence regain of 98 s(-)(1). Stopped-flow UV-vis studies, which monitor the concentration of substrate, revealed a rapid loss in absorbance during catalysis with a rate of 97 s(-)(1). These results suggest that the rate-limiting step in the reaction catalyzed by ImiS is C-N bond cleavage. Rapid freeze quench EPR studies on Co(II)-substituted ImiS demonstrated the appearance of a rhombic signal after 10 ms that is assigned to a reaction intermediate that has a five-coordinate metal center. A distinct product (EP) complex was also observed and began to appear in 18-19 ms. When these results are taken together, they allow for a reaction mechanism to be offered for the B2 metallo-beta-lactamases and demonstrate that the mono- and dinuclear Zn(II)-containing enzymes share a common rate-limiting step, which is C-N bond cleavage.     

Catalytic mechanism of S-ribosylhomocysteinase (LuxS): stereochemical course and kinetic isotope effect of proton transfer reactions

S-ribosylhomocysteinase (LuxS) catalyzes the cleavage of the thioether bond in S-ribosylhomocysteine (SRH) to produce homocysteine and 4,5-dihydroxy-2,3-pentanedione (DPD), the precursor of type II bacterial quorum sensing molecule. The proposed mechanism involves a series of proton-transfer reactions, which are catalyzed by an Fe2+ ion and two general acids/bases in the LuxS active site, resulting in the migration of the ribose carbonyl group from its C1 to C3 position. Subsequent beta-elimination at C4 and C5 positions completes the catalytic cycle. In this work, the regiochemistry and stereochemical course of the proton transfer reactions were determined by carrying out the reactions using various specifically deuterium-labeled SRH as substrate and analyzing the reaction products by 1H NMR spectroscopy and mass spectrometry. Our data indicate a suprafacial transfer of the ribose C2 proton to its C1 position and the C3 proton to the C2 position during catalysis, whereas the ribose C4 proton is completely washed into solvent. The primary deuterium kinetic isotope effect suggests that the conversion of 2-keto intermediate to 3-keto intermediate is partially rate limiting. However, mutation of Glu-57, the putative second general acid/base in catalysis, to an aspartic acid renders the final beta-elimination step rate limiting.     

Role of glutamate-268 in the catalytic mechanism of nonphosphorylating glyceraldehyde-3-phosphate dehydrogenase from Streptococcus mutans

Nonphosphorylating nicotinamide adenine dinucleotide (phosphate)- [NAD(P)-] dependent aldehyde dehydrogenases share a number of conserved amino acid residues, several of which are directly implicated in catalysis. In the present study, the role of Glu-268 from nonphosphorylating glyceraldehyde-3-phosphate dehydrogenase (GAPN) from Streptococcus mutans was investigated. Its substitution by Ala resulted in a k(cat) decrease by 3 orders of magnitude. Pre-steady-state analysis showed that, for both the wild-type and E268A GAPNs, the rate-limiting step of the reaction is associated with deacylation. The pH dependence of the rate of acylation of wild-type GAPN is characterized by the contributions of distinct enzyme protonic species with two pK(a)s of 6.2 and 7.5. Substitution of Glu-268 by Ala resulted in a monosigmoidal pH dependence of the rate constant of acylation with a pK(a) of 6.2, which suggested the assignment of pK(a) 7.5 to Glu-268. Moreover, the E268A substitution did not significantly affect the efficiency of acylation of GAPN, showing that Glu-268 is not critically involved in the acylation, which includes Cys-302 nucleophilic activation and hydride transfer. On the contrary, the drastic decrease of the steady-state rate constant for the E268A GAPN demonstrated the essential role of Glu-268 in the deacylation. At basic pH, the solvent isotope effect of 2.3, characterized by a unique pK(a) of 7.7, and the linearity of the proton inventory showed that the rate-limiting process for deacylation is associated with the hydrolysis step and suggested that the glutamate form of Glu-268 acts as a base catalyst in this process. Surprisingly, the double-sigmoidal form of the pH-steady-state rate constant profile, characterized by pK(a) values of 6.1 and 7.4, revealed the high efficiency of the deacylation even at pH lower than 7.4. Therefore, we propose that the major role of Glu-268 is to promote deacylation through activation and orientation of the attacking water molecule, and in addition to act as a base catalyst at basic pH. From these results in relation to those recently described [Marchal, S., and Branlant, G. (1999) Biochemistry 38, 12950-12958], a scenario for the chemical catalysis of GAPN is proposed.     

The pH dependence of pre-steady-state and steady-state kinetics for the papain-catalyzed hydrolysis of N-alpha-carbobenzoxyglycine p-nitrophenyl ester

Pre-steady-state and steady-state kinetics of the papain (EC 3.4.22.2)-catalyzed hydrolysis of N-alpha-carbobenzoxyglycine p-nitrophenyl ester (ZGlyONp) have been determined between pH 3.0 and 9.5 (I = 0.1 M) at 21 +/- 0.5 degrees C. The results are consistent with the minimum three-step mechanism involving the acyl X enzyme intermediate E X P: (Formula: see text). The formation of the E X S complex may be regarded as a rapid pseudoequilibrium process; the minimum values for k+1 are 8.0 microM-1 s-1 (pH less than or equal to 3.5) and 0.40 microM-1 s-1 (pH greater than 6.0), and that for k-1 is 600 s-1 (pH independent). The pH profile of k+2/Ks (= kcat/Km; Ks = k-1/k+1) reflects the ionization of two groups with pK' values of 4.5 +/- 0.1 and 8.80 +/- 0.15 in the free enzyme. The pH dependence of k+2 and k+3 (measured only at pH values below neutrality) implicates one ionizing group in the acylation and deacylation step with pK' values of 5.80 +/- 0.15 and 3.10 +/- 0.15, respectively. As expected from the pH dependences of k+2/Ks (= kcat/Km) and k+2, the value of Ks changes with pH from 7.5 X 10(1) microM (pH less than or equal to 3.5) to 1.5 X 10(3) microM (pH greater than 6.0). Values of k-2 and k-3 are close to zero over the whole pH range explored (3.0 to 9.5). The pH dependence of kinetic parameters indicates that at acid pH values (less than or equal to 3.5), the k+2 step is rate limiting in catalysis, whereas for pH values higher than 3.5, k+3 becomes rate limiting. The observed ionizations probably reflect the acid-base equilibria of residues involved in the catalytic diad of papain, His159-Cys25. Comparison with catalytic properties of ficins and bromelains suggests that the results reported here may be of general significance for cysteine proteinase catalyzed reactions.     

Hydrogen-deuterium exchange in nucleosides and nucleotides. A mechanism for exchange of the exocyclic amino hydrogens of adenosine.

The pH dependence of the apparent first-order rate constant for the exchange of the exocyclic amino hydrogens of adenosine with deuterium from the solvent was measured by stopped-flow ultraviolet spectroscopy. This dependence shows acid catalysis, base catalysis, and spontaneous exchange at neutral pH values. A study of the effect of several buffers on the rates of exchange reveals both general acid and general base catalytic behavior for the exchange process. We propose a general mechanism for the exchange which requires N-1 protonated adenosine as an intermediate for the acid-catalyzed exchange and amidine anion for the base-catalyzed exchange. In both cases the rate-limiting step is the base-catalyzed abstraction of a proton from the exocyclic amino moiety. Evaluation of the rate constants predicts the equilibrium for the exocyclic amino/imino tautomers to be 6.3 times 10(3):1.     

Comparison of the kinetics and mechanism of the papain-catalyzed hydrolysis of esters and thiono esters

The kinetic constants for the papain-catalyzed hydrolysis of the methyl thiono esters of N-benzoylglycine and N-(beta-phenylpropionyl)glycine are compared with those for the corresponding methyl ester substrates. The k2/Ks values for the thiono esters are 2-3 times higher than those for the esters, and both show bell-shaped pH dependencies with similar pKa's (approximately 4 and 9). The k3 values for the thiono esters are 30-60 times less than those for the esters and do not exhibit a pH dependency. Solvent deuterium isotope effects on k2/Ks and k3 were measured for the ester and thiono ester substrates of both glycine derivatives. Each thiono ester substrate showed an isotope effect similar to that for the corresponding ester substrate. Moreover, use of the proton inventory technique indicated that, as for esters, one proton is transferred in the transition state for deacylation during reactions involving thiono esters and the degree of heavy atom reorganization in the transition state is very similar in both cases. The k3 values for the hydrolysis of a series of para-substituted N-benzoylglycine esters were found to correlate with the k3 values for the corresponding para-substituted thiono esters [Carey, P. R., Lee, H., Ozaki, Y., & Storer, A. C. (1984) J. Am. Chem. Soc. 106, 8258-8262], showing that the rate-determining step for the deacylation of both thiolacyl and dithioacyl enzymes probably involves the disruption of a contact between the substrate's glycinic nitrogen atom and the sulfur of cysteine-25. It is concluded that the hydrolysis of esters and thiono esters proceeds by essentially the same reaction pathway. Due to an oxygen-sulfur exchange process the product released in the case of the N-(beta-phenylpropionyl)glycine thiono ester substrate is the dioxygen acid; however, for the N-benzoylglycine thiono ester substrate, the thiol acid is the initial product. This thiol acid then acts as a substrate for papain and reacylates the enzyme to eventually give the dioxygen acid product. It is shown that thiol acids are excellent substrates for papain.     

On the specificity of porcine elastase.

The specificity of porcine elastase (EC 3.4.4.7) has been studied. Ethyl esters derived from benzoyl amino acids with straight side chains are better substrates than those with branched side chains; the best substrate is norvaline ester. In the series of benzoylalanine alkyl esters the alcohol moiety markedly affects the susceptibility. The benzyl ester was found to be the best nonactivated substrate derived from monomeric amino acid. With elastase acylation is rate limiting, in contrast to chymotrypsin and trypsin where deacylation is generally the rate determining step with specific ester substrates.     

Compared action of neutrophil proteinase 3 and elastase on model substrates. Favorable effect of S'-P' interactions on proteinase 3 catalysts

Neutrophil proteinase 3 (Pr3) and elastase (NE) may cause lung tissue destruction in emphysema and cystic fibrosis. These serine proteinases have similar P(1) specificities. We have compared their catalytic activity using acyl-tetrapeptide-p-nitroanilides, which occupy the S(5)-S'(1) subsites of their substrate binding site, and intramolecularly quenched fluorogenic heptapeptides, which bind at S(5)-S'(4). Most p-nitroanilide substrates are turned over slowly by Pr3 as compared with NE. These differences disappear with the fluorogenic heptapeptides, some of which are hydrolyzed even faster by Pr3 than by NE. Elongation of substrates strongly increases the catalytic efficiency of Pr3, whereas it has little effect on NE catalysis. These different sensitivities to S'-P' interactions show that Pr3 and NE are not interchangeable enzymes despite their similar P(1) specificity.