Stereoselectivity of lipases. I. Hydrolysis of enantiomeric glyceride analogues by gastric and pancreatic lipases, a kinetic study using the monomolecular film technique

In the present study, porcine pancreatic lipase, rabbit gastric lipase, and human gastric lipase stereospecificity toward enantiomeric glyceride derivatives was kinetically investigated using the monomolecular film technique. Pseudoglycerides such as enantiomeric 1(3)-alkyl-2,3(1,2)-diacyl-sn-glycerol, enantiomeric 1(3)-alkyl-2-acyl-sn-glycerol, or enantiomeric 1(3)-acyl-2-acylamino-2-deoxy-sn-glycerol were synthesized in order to assess the lipase stereoselectivity during the hydrolysis of either the primary or the secondary ester position of these glycerides analogues. The cleaved acyl moiety was the same in both enantiomers, thereby excluding the possibility of effects occurring due to fatty acid specificity. We observed a porcine pancreatic lipase sn-3 stereoselectivity when using the enantiomeric 1(3)-alkyl-2-acylamino-2-deoxy-sn-glycerol (diglyceride analogue) which contrasted with the lack of stereoselectivity observed when using the enantiomeric 1(3)-alkyl-2,3(1,2)-diacyl-sn-glycerol (triglyceride analogue). The gastric lipases, in contrast to the pancreatic lipase, preferentially catalyze the hydrolysis of the primary sn-3 ester bond of the enantiomeric monoakyl-diacyl pair tested. From these kinetic data, high hydrolysis rates and no chiral discrimination were observed in the case of rabbit gastric lipase, whereas low rates and a clear chiral discrimination was noticed in the case of human gastric lipase during hydrolysis of the acyl chain from the secondary ester bond of 1(3)-alkyl-2-acyl enantiomers. It is particularly obvious that in the case of human gastric lipase decreasing the lipid packing increases the lipase sn-3 stereopreference during hydrolysis of the primary ester bond of the enantiomeric 2-acylamino derivatives (diglyceride analogue).     

Novel chromatographic resolution of chiral diacylglycerols and analysis of the stereoselective hydrolysis of triacylglycerols by lipases

In the present study, we propose a general and accessible method for the resolution of enantiomeric 1,2-sn- and 2,3-sn-diacylglycerols based on derivatization by isocyanates, which can be easily used routinely by biochemists to evaluate the stereopreferences of lipases in a time course of triacylglycerol (TAG) hydrolysis. Diacylglycerol (DAG) enantiomers were transformed into carbamates using achiral and commercially available reagents. Excellent separation and resolution factors were obtained for diacylglycerols present in lipolysis reaction mixtures. This analytical method was then applied to investigate the stereoselectivity of three model lipases (porcine pancreatic lipase, PPL; lipase from Rhizomucor miehei, MML; and recombinant dog gastric lipase, rDGL) in the time course of hydrolysis of prochiral triolein as a substrate. From the measurements of the diglyceride enantiomeric excess it was confirmed that PPL was not stereospecific (position sn-1 vs sn-3 of triolein), whereas MML and rDGL preferentially hydrolyzed the ester bond at position sn-1 and sn-3, respectively. The enantiomeric excess of DAGs was not constant with time, decreasing with the course of hydrolysis. This was due to the fact that DAGs can be products of the stereospecific hydrolysis of TAGs and substrates for stereospecific hydrolysis into monoacylglycerols.     

Immobilization of lipases on different carriers and their use in synthesis of pentyl isovalerates

Porcine pancreatic lipase (PPL) and Candida cylindracea lipase (CCL) were immobilized on Celite and Amberlite IRA 938 by deposition from the aqueous solution by the addition of hexane. The influence of the immobilization on the activities of the immobilized lipase derivatives has been studied. The immobilized lipases were used in synthesis of pentyl isovalerates. Various reaction parameters affecting the synthesis of pentyl isovalerates were investigated. The reaction rates were compared with the rates of esterification with free lipases. The immobilized lipases were found to be very effective in the esterification reaction. The lipases immobilized on Celite 545 exhibited better operational stabilities than that of immobilized on Amberlite IRA-938.     

The acetates of p-nitrophenyl alpha-L-arabinofuranoside--regioselective preparation by action of lipases

All possible di-O-acetates and mono-O-acetates of p-nitrophenyl alpha-L-arabinofuranoside were prepared by chemoenzymatic way using lipases. The 2,3-di-O-acetate was obtained in 90% yield by deacetylation of the primary acetyl group of per-O-acetylated p-nitrophenyl alpha-L-arabinofuranoside by Candida cylindracea lipase (CCL) or Candida rugosa lipase (LAY). The 2,5- and 3,5-di-O-acetates were obtained by acetylation of p-nitrophenyl alpha-L-arabinofuranoside by Pseudomonas cepacia lipase (LPS-30) in organic solvents. The 5-O-acetate was regioselectively synthesised in 95% yield by acetylation of p-nitrophenyl alpha-L-arabinofuranoside catalysed by porcine pancreas lipase. Finally, the 2- and 3-O-acetates of p-nitrophenyl alpha-L-arabinofuranoside were obtained in two steps. The enzymatic di-O-acetylation of p-nitrophenyl alpha-L-arabinofuranoside by LPS-30 was followed by enzymatic hydrolysis of the primary acetyl group by CCL or LAY.     

Stereoselectivity of lipases. II. Stereoselective hydrolysis of triglycerides by gastric and pancreatic lipases

In the present study, porcine pancreatic lipase, rabbit gastric lipase, and human gastric lipase stereospecificity toward chemically alike, but sterically nonequivalent ester groups within one single triglyceride molecule was investigated. Lipolysis reactions were carried out on synthetic trioctanoin or triolein, which are homogenous, prochiral triglycerides, chosen as models for physiological lipase substrates. Diglyceride mixtures resulting from lipolysis were derivatized with optically active R-(+)-1-phenylethylisocyanate, to give diastereomeric carbamate mixtures, which were further separated by high performance liquid chromatography. Resolution of diastereomeric carbamates gave enantiomeric excess values, which reflect the lipases stereobias and clearly demonstrate the existence of a stereopreference by both gastric lipases for the sn-3 position. The stereoselectivity of human and rabbit gastric lipases, expressed as the enantiomeric excess percentage, was 54% and 70% for trioctanoin and 74% and 47% for triolein, respectively. The corresponding values with porcine pancreatic lipase were 3% in the case of trioctanoin and 8% in that of triolein. It is worth noting that rabbit gastric lipase, unlike human gastric lipase, became more stereoselective for the triglyceride with shorter acyl chains (trioctanoin). This is one of the most striking catalytic differences observed between these two gastric lipases.     

Enrichment of butteroil with conjugated linoleic acid via enzymatic interesterification (acidolysis) reactions

Microbial lipases from Candida cylindracea, Pseudomonas sp., Mucor miehei and Candida antarctica were screened for their ability to incorporate conjugated linoleic acid into butteroil triacylglycerides. The lipase from Candida antarctica was employed in a substrates-only medium to increase the conjugated linoleic acid content of the acylglycerides from 0.6 to 15 g/100 g fat.     

Stereoselectivity of Mucorales lipases toward triradylglycerols--a simple solution to a complex problem

The lipases from Rhizopus and Rhizomucor are members of the family of Mucorales lipases. Although they display high sequence homology, their stereoselectivity toward triradylglycerols (sn-2 substituted triacylglycerols) varies. Four different triradylglycerols were investigated, which were classified into two groups: flexible substrates with rotatable O'-C1' ether or ester bonds adjacent to C2 of glycerol and rigid substrates with a rigid N'-C1' amide bond or a phenyl ring in sn-2. Although Rhizopus lipase shows opposite stereopreference for flexible and rigid substrates (hydrolysis in sn-1 and sn-3, respectively), Rhizomucor lipase hydrolyzes both groups of triradylglycerols preferably in sn-1. To explain these experimental observations, computer-aided molecular modeling was applied to study the molecular basis of stereoselectivity. A generalized model for both lipases of the Mucorales family highlights the residues mediating stereoselectivity: (1) L258, the C-terminal neighbor of the catalytic histidine, and (2) G266, which is located in a loop contacting the glycerol backbone of a bound substrate. Interactions with triradylglycerol substrates are dominated by van der Waals contacts. Stereoselectivity can be predicted by analyzing the value of a single substrate torsion angle that discriminates between sn-1 and sn-3 stereopreference for all substrates and lipases investigated here. This simple model can be easily applied in enzyme and substrate engineering to predict Mucorales lipase variants and synthetic substrates with desired stereoselectivity.     

An ultraviolet spectrophotometric assay for the screening of sn-2-specific lipases using 1,3-O-dioleoyl-2-O-α-eleostearoyl-sn-glycerol as substrate

In the present study, we propose a continuous assay for the screening of sn-2 lipases by using triacylglycerols (TAGs) from Aleurites fordii seed (tung oil) and a synthetic TAG containing the α-eleostearic acid at the sn-2 position and the oleic acid (OA) at the sn-1 and sn-3 positions [1,3-O-dioleoyl-2-O-α-eleostearoyl-sn-glycerol (sn-OEO)]. Each TAG was coated into a microplate well, and the lipase activity was measured by optical density increase at 272 nm due to transition of α-eleostearic acid from the adsorbed to the soluble state. The sn-1,3-regioselective lipases human pancreatic lipase (HPL), LIP2 lipase from Yarrowia lipolytica (YLLIP2), and a known sn-2 lipase, Candida antarctica lipase A (CALA) were used to validate this method. TLC analysis of lipolysis products showed that the lipases tested were able to hydrolyze the sn-OEO and the tung oil TAGs, but only CALA hydrolyzed the sn-2 position. The ratio of initial velocities on sn-OEO and tung oil TAGs was used to estimate the sn-2 preference of lipases. CALA was the enzyme with the highest ratio (0.22 ± 0.015), whereas HPL and YLLIP2 showed much lower ratios (0.072 ± 0.026 and 0.038 ± 0.016, respectively). This continuous sn-2 lipase assay is compatible with a high sample throughput and thus can be applied to the screening of sn-2 lipases.     

Initial water content and lipase-mediated ester formation in hexane

Lipase biocatalysis was investigated as a tool for the production of esters by two model reactions, esterification of 1-butanol with 2-methyl-1-pentanoic acid and irreversible transesterification between 2-methyl-1-pentanol and vinyl acetate. The reactions were carried out in hexane using lipases from Candida cylindracea and porcine pancreas. The initial water content influenced both the yield of the ester and the enantioselectivity of the reaction (esterifica-tions) or the ester formation only (transesterifications).     

Substrate specificity of Staphylococcus aureus (TEN5) lipases with isomeric oleoyl-sn-glycerol ethers as substrates

For the first time fully protected substrates with only one hydrolyzable ester bond have been used to analyze the substrate specificity of microbial lipases. In these substrates the ester is attached to the glycerol molecule in a precisely defined position. The use of three different substituents generates chirality and thus allows the analysis of positional specificities of individual lipases. Therefore, these new substrates have been used to study the enzymatic activities of two closely related lipases isolated from Staphylococcus aureus (TEN5) designated the 44 and 43 kDa lipase. The lipases, especially the 44 kDa molecule, show a high specificity for the hydrolysis of the ester in the sn-1 position (S-configuration), which is hydrolyzed by a factor of ten faster than that in the sn-3 position. In addition, the study demonstrates for the first time that the rate of hydrolysis of a fatty acid ester attached to the sn-2 position of glycerol by microbial lipases depends on the configuration of the substrate molecule.     

Meetings & Symposia

Abstract

Porcine pancreatic lipase (PPL) and Candida cylindracea lipase (CCL) were immobilized on Celite and Amberlite IRA 938 by deposition from the aqueous solution by the addition of hexane. The influence of the immobilization on the activities of the immobilized lipase derivatives has been studied. The immobilized lipases were used in synthesis of pentyl isovalerates. Various reaction parameters affecting the synthesis of pentyl isovalerates were investigated. The reaction rates were compared with the rates of esterification with free lipases. The immobilized lipases were found to be very effective in the esterification reaction. The lipases immobilized on Celite 545 exhibited better operational stabilities than that of immobilized on Amberlite IRA‐938.     

微环境对脂肪酶催化拆分外消旋2－辛醇的影响

微环境对脂肪酶催化拆分外消旋２－辛醇的影响　　　　　　　杨红,曹淑桂,韩四平,黄仲丽,杨同书（吉林大学酶工程国家重点实验室,长春１３００２３）手性２－辛醇不仅是制备液晶材料不可缺少的重要手性原料,也是合成具有光学活性的医药和农药的重要手性中间体．本文...     

Synthesis of 2-monoacylglycerols and structured triacylglycerols rich in polyunsaturated fatty acids by enzyme catalyzed reactions

This paper studies the synthesis of structured triacylglycerols (STAGs) by a four-step process: (i) obtaining 2-monoacylglycerols (2-MAGs) by alcoholysis of cod liver oil with several alcohols, catalyzed by lipases Novozym 435, from Candida antartica and DF, from Rhizopus oryzae, (ii) purification of 2-MAGs, (iii) formation of STAGs by esterification of 2-MAGs with caprylic acid catalyzed by lipase DF, from R. oryzae, and (iv) purification of these STAGs. For the alcoholysis of cod liver oil, absolute ethanol, ethanol 96% (v/v) and 1-butanol were compared; the conditions with ethanol 96% were then optimized and 2-MAG yields of around 54-57% were attained using Novozym 435. In these 2-MAGs, DHA accounted for 24-31% of total fatty acids. In the operational conditions this lipase maintained a stable level of activity over at least 11 uses. These results were compared with those obtained with lipase DF, which deactivated after only three uses. The alcoholysis of cod liver oil and ethanol 96% catalyzed by Novozym 435 was scaled up by multiplying the reactant amounts 100-fold and maintaining the intensity of treatment constant (IOT=3g lipase h/g oil). In these conditions, the 2-MAG yield attained was about 67%; these 2-MAGs contained 36.6% DHA. The synthesized 2-MAGs were separated and purified from the alcoholysis reaction products by solvent extraction using solvents of low toxicity (ethanol and hexane); 2-MAG recovery yield and purity of the target product were approximately 96.4% and 83.9%, respectively. These 2-MAGs were transformed to STAGs using the optimal conditions obtained in a previous work. After synthesis and purification, 93% pure STAGs were obtained, containing 38% DHA at sn-2 position and 60% caprylic acid (CA) at sn-1,3 positions (of total fatty acids at these positions), i.e. the major TAG is the STAG with the structure CA-DHA-CA.     

The His gap motif in microbial lipases: a determinant of stereoselectivity toward triacylglycerols and analogs

Lipases preferably hydrolyze the sn-1 and sn-3 acyl chain of triacylglycerols and sn-2 substituted analogs. Molecular modeling studies of the stereopreference of microbial lipases from Rhizopus oryzae, Rhizomucor miehei, Candida rugosa, and lipase B from Candida antarctica toward the hydrolysis of triacylglycerols and analogs revealed that sterical interactions occurring between the sn-2 substituent and the His gap affect substrate geometry, which can be monitored by a single torsion angle. This torsion angle correlates to the experimentally determined stereopreference and is, therefore, suitable to predict stereopreference by molecular modeling. For a given microbial lipase, stereopreference can be estimated by measuring the distance between the side chains of the His gap residues: a narrow His gap cleft implies sn-3 stereopreference for all investigated substrates; a medium-sized His gap discriminates by flexibility of the substrates: flexible substrates are hydrolyzed in sn-1, while rigid substrates are hydrolyzed in sn-3. A wide open His gap implies sn-1 stereopreference for all substrates. This rule holds for all investigated microbial wild type lipases and mutants.     

Enantiomeric perylene-glycerolipids as fluorogenic substrates for a dual wavelength assay of lipase activity and stereoselectivity

A new type of fluorogenic alkyldiacyl glycerols was synthesized and used as fluorogenic substrates for the analysis of lipase activities and stereoselectivities. These compounds contain perylene as a fluorophore and the trinitrophenylamino (TNP) residue as a quencher. Both substituents are covalently bound to the ω-ends of the sn-2 and sn-1(3) acyl chains, respectively. Upon glycerolipid hydrolysis, the residues are separated from each other thus allowing determination of lipase activity by the continuous increase in fluorescence intensity which is caused by dequenching. Using enantiomeric pairs of these compounds, we were able to analyze lipase stereoselectivity depending on the reaction medium. Mixtures of enantiomeric fluorogenic alkyldiacyl glycerols, selectively labelled with pyrene or perylene as fluorophores, can be used for a dual-wavelength “stereoassay” of lipases. Since absorption and emission maxima of both labels are clearly separated, hydrolysis of the respective enantiomeric substrates can be determined simultaneously, and the difference in the rates of hydrolysis can be taken as a parameter for the stereopreference of a lipase. Hydrolysis rates measured with perylene-substituted lipids are generally lower than those obtained with the pyrene analogs. Thus, with a mixture of perylene and pyrene-substituted lipids, we observe a higher apparent stereoselectivity of lipases since we measure a combination of stereo- and substrate selectivity. In the presence of albumin, all microbial lipases tested so far exhibit stereopreference for the sn-1 glycerol position. In our assay, the apparent stereoselectivities are highest if in the presence of albumin, the sn-1 position carries pyrene and the sn-3 position is substituted with perylene. The lipase stereoselectivity assay described here requires the simultaneous measurement of the fluorescence intensities at two different wavelengths in a single cuvette and can thus be carried out using existing and cheap instrumentation that was developed for the fluorimetric analysis of Ca⁺⁺ concentrations. © 1996 Wiley-Liss, Inc.     

Substrate selectivity of lipases in the esterification of oleic acid, linoleic acid, linolenic acid and their all-trans-isomers and in the transesterification of cis/trans-isomers of linoleic acid methyl ester

The substrate selectivity of several microbial lipases has been examined in the esterification of oleic acid, linoleic acid, linolenic acid and their all-trans-isomers and in the alcoholysis of isomeric linoleic acid methyl esters with n-butanol. Lipases from Candida cylindracea and Mucor miehei preferred fatty acids and methyl esters with a (first) cis double bond in 9-position, while Chirazyme L-5, a Candida antarctica lipase A, had a preference for trans-9 unsaturated substrates.     

Lipases have similar water activity profiles in different reactions

The shape of the profiles of enzyme activity versus water activity for four different lipases were independent of the reaction used to determine the activity. The profile for each lipase (Rhizopus arrhizus, Pseudomonas sp., Candida rugosa and Lipozyme) in esterification, hydrolysis and transesterifications profiles were the same. In transesterification the yield was unaffected by the water activity but the hydrolysis yield increased with increasing aW .     

Synthesis of structured lipids by two enzymatic steps: Ethanolysis of fish oils and esterification of 2-monoacylglycerols

This paper studies the synthesis of structured triacylglycerols (STAGs), rich in polyunsaturated fatty acids (PUFAs) by a two-step enzymatic process: (i) alcoholysis of fish oils (cod liver and tuna oils) with ethanol to obtain 2-monoacylglycerols (2-MAGs), catalyzed by 1,3 specific lipases and (ii) esterification of these 2-MAGs with caprylic acid (CA, 8:0), also catalyzed by a 1,3 specific lipase, to produce STAGs of structure CA–PUFA–CA. As regards the alcoholysis reaction, three factors have been studied: the influence of the type of lipase used (lipase D from Rhizopus oryzae, immobilized on Accurel MP1000, and Novozym 435 from Candida antarctica), the operational mode of a stirred tank reactor (STR operating in discontinuous and continuous mode) and the intensity of treatment (IOT = lipase amount × reaction time/oil amount). Although higher 2-MAG yields were obtained with lipase D, Novozym 435 was selected due to its greater stability in the operational conditions. The highest 2-MAG yield (63%) was attained in the STR operating in discontinuous mode at an IOT of 1 g lipase × h g oil^?1 (at higher IOT the 2-MAGs were degraded to glycerol). This system was scaled up to 100 times the initial volume, achieving a similar yield (65%) at the same IOT. The 2-MAGs in the final alcoholysis reaction mixture were separated from ethyl esters by solvent extraction using solvents of low toxicity (ethanol and hexane); the 2-MAG recovery yield was over 90% and the purity was approximately 87–90%. Regarding the esterification of the 2-MAGs, the following factors were studied: the influence of the lipase type used, the presence or absence of solvent (hexane) and the reaction time or intensity of treatment (IOT = lipase amount × reaction time/2-MAG amount). Of the five lipases tested, the highest STAG percentages (over 90%) were attained with lipases D and DF, immobilized on Accurel MP1000. These STAGs contain 64% CA, of which 98% is at positions 1 and 3. Position 2 contains 5% CA and 45% PUFAs, which means that all the PUFAs that were located at position 2 in the original oil remain in that position in the final STAGs. The lipase D immobilized on Accurel MP1000 is stable in the operational conditions used in the esterification reaction. Finally the purification of STAGs was carried out by neutralization of free fatty acids with hydroethanolic solution of KOH and extraction of STAGs with hexane. By this method purity was over 95% and separation yields were about 80%.     

Microemulsions as a tool for the regioselective lipase-catalysed esterification of aliphatic diols

The efficiency of Humicola lanuginosa and Candida cylindracea lipases to catalyse the regioselective esterification of butane-1,3-diol with oleic acid has been demonstrated in water-in-oil microemulsion systems stabilized with sodium (bis-2-ethylhexyl) sulphosuccinate as a surfactant in isooctane. Mono- and diesters were selectively synthesized with high reaction rates. The product distribution depends on the positional specificity of the lipases. Water-in-oil microemulsions appear to be an effective and fast system for the regioselective enzymatic esterification of diols. Received: 29 April 1996 / Received revision: 29 July 1996 / Accepted: 5 August 1996     

Cloning and nucleotide sequences of two lipase genes from Candida cylindracea.

Two lipase-encoding genes (LIP1 and LIP2) have been isolated from a SacI genomic library of the yeast Candida cylindracea and their nucleotide sequences have been determined. Comparison with the sequence of a cDNA ruled out the presence of introns in the two genes. Both ORFs encode for mature proteins of 534 residues with putative signal peptides of 15 and 14 amino acids, respectively. When compared with other lipase sequences, the two C. cylindracea lipases showed homology only with the Geotrichum candidum lipase, whereas they shared a significant similarity with several esterases.