Comparison of the Unit-chain Distributions of Glycogens from Different Biological Sources,Revealed by Anion Exchange Chromatography

The precise distributions of α-1,4-unit-chains of several kinds of glycogens, average chain length 7–13, from different sources, e.g., mammals, shellfish, mushrooms, and microorganisms, were compared using high performance anion exchange chromatography (HPAEC). These glycogens were completely debranched, and a series of maltosaccharides derived from individual unit-chains were analyzed. Most glycogens had similar chromatographic profiles, with degrees of polymerization (DPs), from 4–5 to 35; oyster glycogen contained shorter chains of DP 2–3. On the other hand, molar-based distribution patterns of these glycogens appeared to be specific to their origins. Ratios of their A- to B-chains varied from 0.6: 1 to 1.2: 1, as estimated by quantitative HPAEC of maltosaccharides by debranching of the β-limit dextrins. Possible chain lengths of the exterior A-chains were also discussed.     

Impact of the copepod Mytilicola orientalis on the Pacific oyster Crassostrea gigas in Ireland.

Infections of a population of Crassostrea gigas by the copepod Mytilicola orientalis were examined at an oyster growing site at Dungarvan, County Waterford, Ireland. Twenty-one samples, each consisting of 20 to 30 oysters have been examined over 2 yr. Condition, sex, reproductive stage, length, weight, glycogen content and other parasite burdens of the oysters were examined in relation to the degree of infection of M. orientalis; 14.38% of oysters were infested. Mean abundance was 0.6 oyster(-1) The maximum number of copepods in an oyster was 20. M. orientalis had no effect on condition, growth, sex, stage or glycogen content of the oyster but correlated with shell burrowing by Polydora sp.     

The fine structure of amylopectin

A critical examination of an enzymic method for determining the ratio of A and B chains in amylopectin leads to a value of ～ 1:1, and not 2:1 as suggested other workers. Partial debranching with pullulanase gave results consistent with earlier suggestions that A chains are predominantly and selectively removed. The ratio of A and B chains in a partially branched amylopectin has been determined, and the results are discussed in relation to possible structures for amylopectin.     

Purification of pullulanase from <Emphasis Type="Italic">Aureobasidium pullulan</Emphasis>s

Purification and characterization of pullulanase from Aureobasidium pullulans. Pullulanase was purified by using gel—filtration column then on ion exchange using Q-sepharose column yielding a single peak. Purification was further carried out on SP-sepharose column. Molecular weight of pullulanase from A. pullulans was found to be about 73 KDa on the SDS-PAGE 10%. Native-PAGE 10% showed the activity of pullulanase, using polyacrylamide gel containing pullulan. Hydrolysis products from pullulanase activity with soluble starch, glycogen and pullulan on thin layer chromatography appeared as one band which is maltotriose, while α-amylase with soluble starch and glycogen showed two bands which are maltose and maltotriose but α-amylase gave negative result with pullulan on TLC chromatography only. Pullulanase could degrade α-1,6 glycosidic linkage of the previous substrates, while amylase could degrade α-1,4 glycosidic linkage of glycogen, soluble starch and pullulan. MALDI-Ms was employed to deduce protein sequence of pullulanase.     

Granule size affects the acetyl substitution on amylopectin populations in potato and sweet potato starches

Specific enzymatic degradation in combination with chromatographic and spectrometric techniques was used to understand acetyl group distribution over the amylopectin populations of differently sized granule fractions from potato and sweet potato starches. The hydrolysates obtained after -amylase, ß-amylase, pullulanase, and the combination of pullulanase, -amylase and amyloglucosidase treatment were investigated by high-performance size-exclusion chromatography (HPSEC), high-performance anion-exchange chromatography (HPAEC) and Maldi-Tof-MS (Matrix-Assisted Laser Desorption/Ionisation Time-Of-Flight Mass Spectrometry). The acetyl groups were found to be located near the branching point, in the external chain and in the internal chain regions. The acetyl group distributions were different for amylopectin from different granule size fractions. Higher DP (degree of polymerization) fragments were present in the digests of acetylated amylopectin populations of the small size granule starches. Our studies confirmed that acetyl groups were unevenly distributed over the amylopectin populations.     

Metabolism of the reserve polysaccharide of Streptococcus mitis. Some properties of a pullulanase

1. A pullulanase has been separated from cell extracts of Streptococcus mitis. The enzyme was freed from transglucosylase by fractionation with ammonium sulphate. 2. Pullulanase was produced in the absence of inducers, and addition of glucose or maltose to the broth did not increase the yield of enzyme. 3. The pullulanase acted rapidly on alpha-(1-->6)-bonds in substrates having the structure alpha-maltodextrinyl-(1-->6)-maltodextrin, but had no action on isomaltose, 6-alpha-glucosylmaltodextrins or 6-alpha-maltodextrinylglucoses. 4. 6-alpha-Maltotriosylmaltodextrins were hydrolysed over 10 times faster than 6-alpha-maltosylmaltodextrins. 5. The branch linkages of amylopectin phosphorylase limit dextrin, glycogen phosphorylase limit dextrin and glycogen beta-amylase limit dextrin were hydrolysed. The action of pullulanase on amylopectin and glycogen was accompanied by a rise in the iodine stain of 50% and 30% respectively. 6. A reversal of pullulanase action occurred on incubation with high concentrations of maltotriose. Condensation of maltosyl units to form a branched tetrasaccharide occurred less readily. 7. S. mitis pullulanase was rapidly inactivated at temperatures higher than 40 degrees , and the enzyme did not recover activity on storage at room temperature.     

Action of Pseudomonas isoamylase on various branched oligo- and poly-saccharides

Pseudomonas isoamylase (EC 3.2.1.68) hydrolyzes (1 → 6)-α-D-glucosidic linkages of amylopectin, glycogen, and various branched dextrins and oligosaccharides. The detailed structural requirements for the substrate are examined qualitatively and quantitatively in this paper, in comparison with the pullulanase of Klebsiella aerogenes. As with pullulanase. Ps. isoamylase is unable to cleave D-glucosyl stubs from branched saccharides. Ps. isoamylase differs from pullulanase in the following characteristics: (1) The favored substrates for Ps. isoamylase are higher-molecular-weight polysaccharides. Most of the branched oligosaccharides examined were hydrolyzed at a lower rate, 10% or less of the rate of hydrolysis of amylopectin. (2) Maltosyl branches are hydrolyzed off by Ps. isoamylase very slowly in comparison with maltotriosyl branches. (3)Pr. isoamylase requires a minimum of three D-glucose residues in the B- or C-chain.     

Multiple branching in glycogen and amylopectin

The β-amylase limit dextrins of glycogen and amylopectin are completely debranched by joint action of isoamylase and pullulanase. Action of isoamylase alone results in incomplete debranching as a consequence of the inability of this enzyme to hydrolyze those A-chains that are two glucose units in length (half the total number of A-chains). From the reducing powers released by isoamylase acting (a) alone and (b) in conjunction with pullulanase, the relative numbers of A- (unsubstituted) and B- (substituted) chains in the β-dextrins, and therefore in the native polysaccharides themselves, can be calculated. Examination of a series of glycogens and amylopectins in this way showed that the ratio of A-chains: B-chains is markedly higher in amylopectins (1.5–2.6:1) than in glycogens (0.6–1.2:1). Glycogen typically contains A-chains and B-chains in approximately equal numbers; amylopectin typically contains approximately twice as many A-chains as B-chains. These polysaccharides therefore differ in degree of multiple branching as well as in average chain length. A consequence of these findings is that amylopectin cannot be formed in vivo by debranching of a glycogen precursor, as proposed by Erlander, since it is impossible to increase the A:B chain ratio by action of a debranching enzyme.     

Fine structural properties of natural and synthetic glycogens

Glycogen, highly branched (1→4)(1→6)-linked α-d-glucan, can be extracted from natural sources such as animal tissues or shellfish (natural source glycogen, NSG). Glycogen can also be synthesized in vitro from glucose-1-phosphate using the cooperative action of α-glucan phosphorylase (GP, EC 2.4.1.1) and branching enzyme (BE, EC 2.4.1.18), or from short-chain amylose by the cooperative action of BE and amylomaltase (AM, EC 2.4.1.25). It has been shown that enzymatically synthesized glycogen (ESG) has structural and physicochemical properties similar to those of NSG. In this study, the fine structures of ESG and NSG were analyzed using isoamylase and α-amylase. Isoamylase completely hydrolyzed the α-1,6 linkages of ESG and NSG. The unit-chain distribution (distribution of degrees of polymerization (DP) of α-1,4 linked chains) of ESG was slightly narrower than that of NSG. α-Amylase treatment revealed that initial profiles of hydrolyses of ESG and NSG were almost the same: both glycogens were digested slowly, compared with starch. The final products from NSG by α-amylase hydrolysis were glucose, maltose, maltotriose, branched oligosaccharides with DP ? 4, and highly branched macrodextrin molecules with molecular weights of up to 10,000. When ESG was digested with excess amounts of α-amylase, much larger macrodextrins (molecular weight > 10⁶) were detected. In contrast, oligosaccharides with DP 4-7 could not be detected from ESG. These results suggest that the α-1,6 linkages in ESG molecules are more regularly distributed than those in NSG molecules.     

Pullulanase is a characteristic of manyKlebsiella species and functions in the degradation of starch

Summary The type strainsKlebsiella pneumoniae NCTC 9633,K.ozaenae NCTC 5050 andK.rhinoscleromatis NCTC 5046, representative for all members of the genusKlebsiella, were found to produce pullulanase (pullulan 6-glucanohydrolase, EC 3.2.1.41). In addition, 58 fresh isolates ofKlebsiella sp. of human origin were screened for growth on a defined solid medium with either maltose, maltodextrin mixture, soluble starch, glycogen, or pullulan as the sole carbon source. All of the strains showed luxurious growth on maltose and maltodextrins, seven strains grew poorly or not at all on the polymeric substrates, soluble starch, pullulan or glycogen. Three fresh isolates out of the 51 strains which did grow on each carbon source tested were examined in more detail with respect to a possible involvement of pullulanase in the utilization of -glucans. The production of pullulanase was inducible by growth of the cells on -glucans, whereas cultivation on glycerol, D-glucose or lactose did not lead to enzyme formation. The level of pullulanase activity in the three strains varied under otherwise comparable culture conditions, as did the level of a co-inducible -amylase. Comparative growth experiments on linear or branched -glucans allow the conclusion that the cooperation of hydrolases specific for 1,4--glucosidic linkages (-amylase) and for 1,6--linkages (pullulanase) is an obligatory requirement for the effective utilization of starch and glycogen.     

Rapid enumeration of Escherichia coli in oysters by a quantitative PCR-ELISA

Direct enumeration of Escherichia coli from oysters was achieved using a polymerase chain reaction (PCR) amplification of the lamB gene coupled with an enzyme-linked immunosorbent assay (ELISA). Amplified PCR products generated using a digoxigenin-labelled primer were heat denatured before being quantified by an ELISA. A biotinylated probe immobilized onto streptavidin-coated microplates was used to capture the digoxigenin-labelled fragments that were detected with a peroxidase antidigoxigenin conjugate. Subsequent enzymic conversion of substrate gave distinct absorbance differences when assaying oyster samples containing E. coli in the range 10-10(5) cfu g-1.     

Crystal structure of the branching enzyme I (BEI) from Oryza sativa L with implications for catalysis and substrate binding

Starch-branching enzyme catalyzes the cleavage of α-1, 4-linkages and the subsequent transfer of α-1,4 glucan to form an α-1,6 branch point in amylopectin. Sequence analysis of the rice-branching enzyme I (BEI) indicated a modular structure in which the central α-amylase domain is flanked on each side by the N-terminal carbohydrate-binding module 48 and the α-amylase C-domain. We determined the crystal structure of BEI at a resolution of 1.9 ? by molecular replacement using the Escherichia coli glycogen BE as a search model. Despite three modular structures, BEI is roughly ellipsoidal in shape with two globular domains that form a prominent groove which is proposed to serve as the α-polyglucan-binding site. Amino acid residues Asp344 and Glu399, which are postulated to play an essential role in catalysis as a nucleophile and a general acid/base, respectively, are located at a central cleft in the groove. Moreover, structural comparison revealed that in BEI, extended loop structures cause a narrowing of the substrate-binding site, whereas shortened loop structures make a larger space at the corresponding subsite in the Klebsiella pneumoniae pullulanase. This structural difference might be attributed to distinct catalytic reactions, transglycosylation and hydrolysis, respectively, by BEI and pullulanase.     

A STUDY OF SIEVE ELEMENT STARCH USING SEQUENTIAL ENZYMATIC DIGESTION AND ELECTRON MICROSCOPY

The fine structure of plastids and their starch deposits in differentiating sieve elements was studied in bean (Phaseolus vulgaris L.). Ultrastructural cytochemistry employing two carbohydrases specific for different linkages was then used to compare the chemical nature of "sieve tube starch" (the starch deposited in sieve elements) with that of the ordinary starch of other cell types. Hypocotyl tissue from seedlings was fixed in glutaraldehyde, postfixed in osmium tetroxide, and embedded in Epon-Araldite. Treatment of thin sections on uncoated copper grids with α-amylase or diastase at pH 6.8 to cleave α-(1 → 4) bonds resulted in digestion of ordinary starch grains but not sieve element grains, as determined by electron microscopy. Since α-(1 → 6) branch points in amylopectin-type starches make the adjacent α-(1 → 4) linkages somewhat resistant to hydrolysis by α-amylase, other sections mounted on bare copper or gold grids were treated with pullulanase (a bacterial α-[1 → 6] glucosidase) prior to digestion with diastase. Pullulanase did not digest sieve element starch, but rendered the starch digestible subsequently by α-amylase. Diastase followed by pullulanase did not result in digestion. The results provide evidence that sieve element starch is composed of highly branched molecules with numerous α-(1 → 6) linkages.     

Fluorogenic substrates of glycogen debranching enzyme for assaying debranching activity

Glycogen debranching enzyme (GDE) degrades glycogen in concert with glycogen phosphorylase. GDE has two distinct active sites for maltooligosaccharide transferase and amylo-1,6-glucosidase activities. Phosphorylase limit dextrin from glycogen is debranched by cooperation of the two activities. Fluorogenic branched dextrins were prepared as substrates of GDE from pyridylaminated maltooctaose (PA-maltooctaose) and maltotetraose, taking advantage of the synthetic action of Klebsiella pneumoniae pullulanase. Their structures were as follows: Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4(Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-6)Glcalpha1-4Glcalpha1-4GlcPA (B3), Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4(Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-6)Glcalpha1-4Glcalpha1-4Glcalpha1-4GlcPA (B4), Glcalpha1-4Glcalpha1-4Glcalpha1-4(Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-6)Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4GlcPA (B5), Glcalpha1-4Glcalpha1-4(Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-6)Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4GlcPA (B6), Glcalpha1-4(Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-6)Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4GlcPA (B7), and Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-6Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4Glcalpha1-4GlcPA (B8). These dextrins were incubated with porcine skeletal muscle GDE. No fluorogenic product was found in the digest of B8. The fluorogenic products from B3, B4, and B5 were PA-maltooctaose only. PA-maltooctaose, PA-maltoundecaose, and 6(7)-O-alpha-glucosyl-PA-maltooctaose were from B7. PA-maltooctaose and 6(6)-O-alpha-glucosyl-PA-maltooctaose were from B6. These results indicate that the maltooligosaccharide transferase removed the maltotriosyl residues from the maltotetraosyl branches by hydrolysis or intramolecular transglycosylation to expose 6-O-alpha-glucosyl residues, and then the amylo-1,6-glucosidase hydrolyzed the alpha-1,6-glycosidic linkages of the products rapidly. Probably, 6-O-alpha-glucosyl-PA-maltooctaoses from B7 and B6 were less susceptible to the amylo-1,6-glucosidase than were those from B3, B4, and B5. Taking this into account, B3, B4, and B5 are suitable substrates for GDE assay.     

Purification and characterization of thermostable β-amylase and pullulanase from high-yielding Clostridium thermosulfurogenes SV2

Thermostable β-amylase and pullulanase, secreted by the thermophilic anaerobic bacterium Clostridium thermosulfurogenes strain SV2, were purified by salting out with ammonium sulphate, DEAE-cellulose column chromatography, and gel filtration using Sephadex G-200. Maltose was identified as a major hydrolysis product of starch by β-amylase, and maltotriose was identified as a major hydrolysis product of pullulan by pullulanase. The molecular masses of native β-amylase and pullulanase were determined to be 180 and 100 kDa by gel filtration, and 210 and 80 kDa by SDS–PAGE, respectively. The temperature optima of purified β-amylase and pullulanase were 70 and 75°C, respectively, and both enzymes were completely stable at 70°C for 2h. The presence of starch further increased the stability of both the enzymes to 80°C and both displayed a pH activity optimum of 6.0. The starch hydrolysis products formed by β-amylase action had β-anomeric form.     

Purifications and Enzymatic Properties of β-Amylase and Pullulanase from Bacillus cereus var. mycoides

A β-amylase and a pullulanase produced by Bacillus cereus var. mycoides were purified by means of ammonium sulfate fractionation, adsorption on starch and celite and Sephadex G–100 column chromatography. The purified enzymes were homogeneous in disc electrophoresis.

The β-amylase released only maltose from amylose, amylopectin, starch and glycogen, and the released maltose was in β-form. The pullulanase released maltose, maltotriose and maltotetraose from β-limit dextrin and maltotriose from pullulan, but not amylose-like substance from amylopectin.

The optimum pHs of β-amylase and pullulanase were about 7 and 6~6.5, respectively. The optimum temperatures of the enzymes were about 50°C. The enzymes were inhibited by the sulfhydryl reagents such as mercuric chloride and p-chloromercuribenzoate, and the inhibitions with p-chloromercuribenzoate were restored by the addition of cysteine. The molecular weights of β-amylase and pullulanase were estimated to be 35,000±5,000 and 110,000±20,000, respectively.     

Crystal structure of pullulanase: evidence for parallel binding of oligosaccharides in the active site

The crystal structures of Klebsiella pneumoniae pullulanase and its complex with glucose (G1), maltose (G2), isomaltose (isoG2), maltotriose (G3), or maltotetraose (G4), have been refined at around 1.7-1.9A resolution by using a synchrotron radiation source at SPring-8. The refined models contained 920-1052 amino acid residues, 942-1212 water molecules, four or five calcium ions, and the bound sugar moieties. The enzyme is composed of five domains (N1, N2, N3, A, and C). The N1 domain was clearly visible only in the structure of the complex with G3 or G4. The N1 and N2 domains are characteristic of pullulanase, while the N3, A, and C domains have weak similarity with those of Pseudomonas isoamylase. The N1 domain was found to be a new type of carbohydrate-binding domain with one calcium site (CBM41). One G1 bound at subsite -2, while two G2 bound at -1 approximately -2 and +2 approximately +1, two G3, -1 approximately -3 and +2 approximately 0', and two G4, -1 approximately -4 and +2 approximately -1'. The two bound G3 and G4 molecules in the active cleft are almost parallel and interact with each other. The subsites -1 approximately -4 and +1 approximately +2, including catalytic residues Glu706 and Asp677, are conserved between pullulanase and alpha-amylase, indicating that pullulanase strongly recognizes branched point and branched sugar residues, while subsites 0' and -1', which recognize the non-reducing end of main-chain alpha-1,4 glucan, are specific to pullulanase and isoamylase. The comparison suggested that the conformational difference around the active cleft, together with the domain organization, determines the different substrate specificities between pullulanase and isoamylase.     

Induction of pullulanase production in Bacillus cereus FDTA-13

Studies were carried out on the production of pullulanase by a newly isolated strain Bacillus cereus FDTA-13. High titres of the enzyme were obtained in a medium containing branched polysaccharides. To further enhance the yield, induction of pullulanase using conventional inducers were studied. Maltooligosaccharides (maltose to maltotetraose) when added in the medium individually, or in a 1:1 combination of maltotriose and maltotetraose resulted different levels of pullulanase compared to control. Growth under carbon limited conditions (5 g l(-1)) with inducers resulted remarkably enhanced pullulanase activity. Pullulanase activity was severely repressed in presence of glucose. Low levels of pullulanase was observed in nitrogen limited medium, even with combinations of several maltosaccharides.     

The molecular structure of waxy maize starch nanocrystals

The insoluble residues obtained by submitting amylopectin-rich native starch granules from waxy maize to a mild acid hydrolysis consist of polydisperse platelet nanocrystals that have retained the allomorphic type of the parent granules. The present investigation is a detailed characterization of their molecular composition. Two major groups of dextrins were found in the nanocrystals and were isolated. Each group was then structurally characterized using β-amylase and debranching enzymes (isoamylase and pullulanase) in combination with anion-exchange chromatography. The chain lengths of the dextrins in both groups corresponded with the thickness of the crystalline lamellae in the starch granules. Only 62 mol % of the group of smaller dextrins with an average degree of polymerization () 12.2 was linear, whereas the rest consisted of branched dextrins. The group of larger dextrins ( 31.7) apparently only consisted of branched dextrins, several of which were multiply branched molecules. It was shown that many of the branch linkages were resistant to the action of the debranching enzymes. The distribution of branched molecules in the two populations of dextrins suggested that the nanocrystals possessed a regular and principally homogeneous molecular structure.     

Structural and functional studies of trans-encoded HLA-DQ2.3 (DQA1*03:01/DQB1*02:01) protein molecule

MHC class II molecules are composed of one α-chain and one β-chain whose membrane distal interface forms the peptide binding groove. Most of the existing knowledge on MHC class II molecules comes from the cis-encoded variants where the α- and β-chain are encoded on the same chromosome. However, trans-encoded class II MHC molecules, where the α- and β-chain are encoded on opposite chromosomes, can also be expressed. We have studied the trans-encoded class II HLA molecule DQ2.3 (DQA1*03:01/DQB1*02:01) that has received particular attention as it may explain the increased risk of certain individuals to type 1 diabetes. We report the x-ray crystal structure of this HLA molecule complexed with a gluten epitope at 3.05 Å resolution. The gluten epitope, which is the only known HLA-DQ2.3-restricted epitope, is preferentially recognized in the context of the DQ2.3 molecule by T-cell clones of a DQ8/DQ2.5 heterozygous celiac disease patient. This preferential recognition can be explained by improved HLA binding as the epitope combines the peptide-binding motif of DQ2.5 (negative charge at P4) and DQ8 (negative charge at P1). The analysis of the structure of DQ2.3 together with all other available DQ crystal structures and sequences led us to categorize DQA1 and DQB1 genes into two groups where any α-chain and β-chain belonging to the same group are expected to form a stable heterodimer.