Response surface methodology to optimize the nutritional parameters for enhanced production of jasmonic acid by Lasiodiplodia theobromae

Aims:  To find out the cumulative effect of the nutritional parameters and to enhance the production of jasmonic acid (JA) in static fermentation by Lasiodiplodia theobromae using response surface methodology (RSM).
Method and Results:  Malt extract, sucrose, NaNO₃ and MgSO₄.7H₂O were analysed by a 30-trial central composite design using RSM for optimizing their concentrations in the medium and the effect of their mutual interaction on JA production. Sucrose and NaNO₃ were found highly significant in influencing the JA production. Malt extract and MgSO₄.7H₂O showed an effect on the JA production in interaction with other variables. When the optimum values of the parameters obtained through RSM (19·95 g l⁻¹ malt extract, 50 g l⁻¹ sucrose, 7·5 g l⁻¹ NaNO₃ and 3·51 g l⁻¹ MgSO₄.7H₂O) were applied, 32% increase in JA production (299 mg l⁻¹) was observed in comparison with 225 mg l⁻¹ of JA produced with same media components not analysed by RSM and subsequently validated the statistical model.
Conclusions:  Increase in JA production was achieved by optimizing the nutritional parameters.
Significance and Impact of the Study:  This is the first report of using RSM for optimizing a medium for JA production. It resulted in an increase in JA production without augmentation of costly additives.     

Effects of feeding and induction strategy on the production of BmR1 antigen in recombinant E. coli

Aim:  To investigate the effects of feeding and induction strategies on the production of Bm R1 recombinant antigen.
Methods and Results:  Fed-batch fermentation was studied with respect to the specific growth rate and mode of induction to assess the growth potential of the bacteria in a bioreactor and to produce high yield of Bm R1 recombinant antigen. Cells were grown at a controlled specific growth rate (μ_set) during pre-induction, followed by constant feeding postinduction. The highest biomass (24·3 g l⁻¹) was obtained during fed-batch process operated at μ_set of 0·15 h⁻¹, whereby lower μ_set (0·075 h⁻¹) gave the highest protein production (9·82 mg l⁻¹). The yield of Bm R1 was increased by 1·2-fold upon induction with 1 mmol l⁻¹ IPTG (isopropyl-β- d -thiogalactoside) compared to using 5 mmol l⁻¹ and showed a further 3·5-fold increase when the culture was induced twice at the late log phase.
Conclusions:  Combination of feeding at a lower μ_set and twice induction with 1 mmol l⁻¹ IPTG yielded the best result of all variables tested, promising an improved method for Bm R1 production .
Significance and Impact of the Study:  This method can be used to increase the production scale of the Bm R1 recombinant antigen to meet the increasing demand for Brugia Rapid^™, a commercial diagnostic test for detection of brugian filariasis.     

Stimulation of biomethanation by Clostridium sp. PXYL1 in coculture with a Methanosarcina strain PMET1 at psychrophilic temperatures

Aim:  Bioaugumentation of low temperature biogas production was attempted by addition of cold-adapted Clostridium and a methanogen.
Methods and Results:  A psychrotrophic xylanolytic acetogenic strain Clostridium sp. PXYL1 growing optimally at 20°C and pH 5·3 and a Methanosarcina strain, PMET1, growing optimally on acetate and producing methane at 15°C were isolated from a cattle manure digester. Anaerobic conversion of xylose at 15°C with the coculture of the two strains was performed, and batch culture methane production characteristics indicated that methanogenesis occurred via acetate through 'acetoclastic' pathway. Stimulation studies were also undertaken to evaluate the effect of exogenous addition of the coculture on biogas yields at 15°C. Addition of 3 ml of PXYL1 at the rate of 12 × 10² CFU ml⁻¹ increased the biogas 1·7-fold (33 l per kg cowdung) when compared to control (19·3 l per kg cowdung) as well as increased the volatile fatty acid (VFA) levels to 3210 mg l⁻¹ when compared to 1140 mg l⁻¹ in controls. Exogenous of addition of 10 ml PMET1 inoculum at the rate of 6·8 ± 10² CFU ml⁻¹ in addition to PXYL1 served to further improve the biogas yields to 46 l kg⁻¹ as well as significantly brought down the VFA levels to 1350 mg l⁻¹.
Conclusions:  Our results suggest that the rate-limiting methanogenic step at low temperatures could be overcome and that biogas yields improved by manipulating the population of the acetoclastic methanogens.
Significance and Impact of the Study:  Stimulation of biomethanation at low temperature by coculture.     

The antibacterial mechanism of carvacrol and thymol against Escherichia coli

Aims:  To investigate the antibacterial mechanism of carvacrol and thymol against Escherichia coli.
Methods and Results:  The time-kill curve results showed that carvacrol and thymol at 200 mg l⁻¹ could inhibit the growth of E. coli . Flow cytometry and fluorescent dyes were used to explore the effect of two components on membrane permeability and membrane potential. In membrane permeability experiment, the mean fluorescence intensity of cells treated with 200 mg l⁻¹ carvacrol or thymol were lower than nonexposed cells. The ratio of red to green fluorescence intensity of DiOC₂(3) reflected the change of membrane potential. Carvacrol and thymol at 200 mg l⁻¹ caused the ratio of red/green decreasing from 0·42 of control to 0·08 and 0·07, respectively.
Conclusions:  Carvacrol and thymol had desired antimicrobial effect on E. coli . The antibacterial effects were attributed to their ability to permeabilize and depolarize the cytoplasmic membrane.
Significance and Impact of the Study:  This study showed the potential use of flow cytometry as a suitable method to investigate the mode of antibacterial action of essential oil components.     

Modification of culture conditions for production of the anti-tubercular hirsutellones by the insect pathogenic fungus Hirsutella nivea BCC 2594

Aims:  This work aimed to improve the production of anti-tubercular hirsutellones by the insect pathogenic fungus Hirsutella nivea BCC 2594.
Methods and Results:  The fungus was cultivated under different carbon/nitrogen sources and aerations (shake vs static flasks) to improve the production of the anti-tubercular alkaloids, hirsutellones A–D. Under the basal conditions, static cultivation at 25°C in minimum salt medium, only hirsutellone B and C were detected with maximum concentrations of 139·00 and 18·27 mg l⁻¹. Substitution of fructose for glucose and peptone for yeast extract increased the titres of hirsutellones A, B and C about two- to threefold. However, hirsutellone D was not detected in this medium. Culture agitation induced the production of hirsutellone D. As a result, the significant amounts of hirsutellones A–D were obtained with the concentration of 29·93, 169·63, 22·65 and 15·71 mg l⁻¹ within 15 days.
Conclusions:  Improved titres of hirsutellones in H. nivea BCC 2549 were achieved with an agitated (200 rev min⁻¹) fructose–peptone medium at 25°C.
Significance and Impact of the Study:  Improved yields of hirsutellones B–D will enable medicinal chemistry modifications leading to a development of a potential candidate for tuberculosis therapy.     

Fungal endophytes from Acer ginnala Maxim: isolation, identification and their yield of gallic acid

Aims:  The aim of the study was to isolate the endophytic fungi from Acer ginnala and screen isolates rich in gallic acid.
Methods and Results:  After epiphytic sterilization, 145 fungal endophytes were isolated from the stem, annual twig and seed of Acer ginnala . The endophytes were grouped into ten different taxa, Phomopsis sp., Neurospora sp., Phoma sp., Epicoccum sp., Penicillium sp., Alternaria sp., Fusarium sp., Trichoderma sp., Cladosporium sp. and a species of Pleosporales Incertae Sedis , by their morphological traits and ITS-rDNA sequence analysis. The content and yield of gallic acid of 141 isolates were determined by HPLC. On average, the species of Pleosporales Incertae Sedis had the highest content and yield of gallic acid (13·28 mg g⁻¹ DW; 119·62 mg l⁻¹), while Alternaria sp. had the lowest.
Conclusions:  Of 141 fungal endophytes from A. ginnala , Phomopsis sp. isolate SX10 showed both the highest content and the highest yield of gallic acid (29·25 mg g⁻¹ DW; 200·47 mg l⁻¹).
Significance and Impact of the Study:  Endophytic fungi isolated from A. ginnala may be used as potential producers of gallic acid and other compounds with biological activities, or functioned as elicitors to produce natural compounds.     

Inactivation of oenological lactic acid bacteria (Lactobacillus hilgardii and Pediococcus pentosaceus) by wine phenolic compounds

Aims:  To investigate the inactivation properties of different classes of phenolic compounds present in wine against two wine isolates of Lactobacillus hilgardii and Pediococcus pentosaceus , and to explore their inactivation mechanism.
Methods and Results:  After a first screening of the inactivation potency of 21 phenolic compounds (hydroxybenzoic and hydroxycinnamic acids, phenolic alcohols, stilbenes, flavan-3-ols and flavonols) at specific concentrations, the survival parameters (MIC and MBC) of the most active compounds were determined. For the L. hilgardii strain, the flavonols morin and kaempferol showed the strongest inactivation (MIC values of one and 5 mg l⁻¹, and MBC values of 7·5 and 50 mg l⁻¹, respectively). For the P. pentosaceus strain, flavonols also showed the strongest inactivation effects, with MIC values between one and 10 mg l⁻¹ and MBC values between 7·5 and 300 mg l⁻¹. Observations by epifluorescence and scanning electron microscopy revealed that the phenolics damaged the cell membrane and promoted the subsequent release of the cytoplasm material into the medium.
Conclusions:  The antibacterial activity of wine phenolics against L. hilgardii and P. pentosaceus was dependent on the phenolic compound tested, and led not only to bacteria inactivation, but also to the cell death.
Significance and Impact of the Study:  New information about the inactivation properties of wine lactic acid bacteria by phenolic compounds is presented. It opens up a new area of study for selecting/obtaining wine phenolic preparations with potential applications as a natural alternative to SO₂ in winemaking.     

Automated sperm morphology analysis in fishes: the effect of mercury on goldfish sperm

This study is the first to examine the morphology of fish sperm using automated sperm morphology analysis (ASMA). The technique was applied to investigate the effect of an environmental pollutant, mercury, on the sperm morphology of goldfish Carassius auratus , and the effects on sperm morphology were compared with those on sperm motility. Goldfish sperm flagellar length was significantly shortened after instant exposure to 100 mg l⁻¹ (368 µM) mercuric chloride, while curvilinear velocity (VCL) and the percentage of motile sperm were significantly decreased at mercuric chloride concentrations of 1 and 10 mg l⁻¹ (3·68 and 36·8 µM), respectively. After 24 h exposure to 0·001 mg l⁻¹ (0·0037 µM) mercuric chloride, flagellar length was significantly reduced in 38% of the spermatozoa. Following exposure to 0·1 mg l⁻¹ (0·37 µM) mercuric chloride for 24 h, however, the majority of spermatozoa (98%), had significantly shortened flagella and increased sperm head length, width and area. Sperm motility was also significantly decreased at 0·1 mg l⁻¹ (0·37 µM) mercuric chloride, probably due to the significantly reduced flagellar length at this concentration. This study shows that the morphological examination of fish sperm by ASMA provides, not only, an excellent tool for monitoring reproductive disruption caused by environmental pollution, but also has applications to other areas of fish reproductive biology, such as cryopreservation and aquaculture.     

Effect of alternative treatments on seed-borne Didymella lycopersici in tomato

Aims:  To quantify the phytotoxicity and effect of alternative seed treatments based on acidified nitrite and elicitors of plant resistance (Tillekur and Chitosan) against seed-borne inocula of Didymella lycopersici .
Methods and Results:  Treatments tested were: nitrite [sodium nitrite in citric acid buffer (pH 2)] at 30, 100 and 300 mmol l⁻¹ and three exposure times (10, 20 and 30 min); Tillekur (in water) at 12·5, 25, 50, 100 and 200 mg ml⁻¹; Chitosan (in 0·05% acetic acid) at 2·5, 5, 10 and 50 mg ml⁻¹. Efficacy of treatments was determined in growth chamber experiments. Nitrite at 300 mmol l⁻¹ was completely effective, as was the fungicide, at controlling disease when applied for less than 20 min. Tillekur was as effective as the fungicide postemergence, but proved to be phytotoxic pre-emergence. Chitosan was significantly less effective than the other treatments.
Conclusions:  The high efficacy and low cost of acidified nitrite indicates that it is a suitable alternative to fungicides.
Significance and Impact of the Study:  There is currently a lack of effective seed treatments that can be used in organic and low-input crops. Treatments identified in this study can be considered as an effective alternative to chemical control against seed-borne fungal pathogens.     

Efficacy of sodium hypochlorite and peracetic acid in sanitizing green coconuts

Aims:  To evaluate the efficacy of sanitizing green coconuts ( Cocos nucifera L.) through the treatment applied by juice industries using sodium hypochlorite and peracetic acid.
Methods and Results:  The surface of the fruits was inoculated with a mixture of five Listeria monocytogenes strains. The treatments consisted in immersing the fruits for 2 min at room temperature in sodium hypochlorite solution containing 200 mg l⁻¹ residual chlorine at pH 6·5, and 80 mg l⁻¹ solution of peracetic acid or sterile water. Bacterial populations were quantified by culturing on trypticase soy agar supplemented with yeast extract and Oxford selective culture medium; however, recovery was higher on the nonselective medium. Immersion in water produced a reduction in the L. monocytogenes population of 1·7 log₁₀ CFU per fruit, while immersion in sodium hypochlorite and peracetic acid solutions resulted in population reductions of 2·7 and 4·7  log₁₀ CFU per fruit respectively.
Conclusions:  The treatments studied are efficient to green coconuts.
Significance and Impact of the Study:  Sanitation of green coconut is one of the most important control measures to prevent the contamination of coconut water. This article provides information that shows the adequacy of sanitizing treatments applied by the juice industries.     

Potential of Bacillus sp. to produce polyhydroxybutyrate from biowaste

Aim:  To test the Bacillus strains for their abilities to produce polyhydroxybutyrate (PHB) from different sugars and biowaste (Pea-shells).
Methods and Results:  Six Bacillus strains were checked for their ability to produce PHB from GM2 medium supplemented with different sugars at the rate of 1% (w/v) and from biowaste and GM2 (BW : M) combinations (3 : 7, 1 : 1, 7 : 3). Glucose supplemented GM2 medium resulted in maximum PHB production of 435 mg l⁻¹ constituting 31–62% w/w of the total cell dry mass. Substituting GM2 medium to the extent of 50% with biowaste (pea-shell slurry) resulted in 945–1205 mg l⁻¹ PHB (55–65% w/w). Optimization for additional nitrogen supplementation, inoculum size resulted in a final PHB production of 3010–3370 mg l⁻¹ equivalent to 300 g kg⁻¹ biowaste (dry wt).
Conclusion:  The Bacillus strains were able to produce PHB from biowaste (Pea-shells) as cheap source of substrate.
Significance and Impact of the Study:  This is the first report on usage of pea-shells as feed for PHB production, opening new possibilities for its use for production of PHB and Bacillus as potential candidate for the purpose.     

Biosurfactant production by Pseudomonas sp. and its role in aqueous phase partitioning and biodegradation of chlorpyrifos

Aim:  To study the effect of biosurfactant on aqueous phase solubility and biodegradation of chlorpyrifos.
Methods and Results:  A Pseudomonas sp. (ChlD), isolated from agricultural soil by enrichment culture technique in the presence of chlorpyrifos, was capable of producing biosurfactant (rhamnolipids) and degrading chlorpyrifos (0·01 g l⁻¹). The partially purified rhamnolipid biosurfactant preparation, having a CMC of 0·2 g l⁻¹, was evaluated for its ability to enhance aqueous phase partitioning and degradation of chlorpyrifos (0·01 g l⁻¹) by ChlD strain. The best degradation efficiency was observed at 0·1 g l⁻¹ supplement of biosurfactant, as validated by GC and HPLC studies.
Conclusion:  The addition of biosurfactant at 0·1 g l⁻¹ resulted in more than 98% degradation of chlorpyrifos when compared to 84% in the absence of biosurfactant after 120-h incubation.
Significance and Impact of the Study:  This first report, to the best of our knowledge, on enhanced degradation of chlorpyrifos in the presence of biosurfactant(s), would help in developing bioremediation protocols to counter accumulation of organophosphates to toxic/carcinogenic levels in environment.     

Mixed aerobic and anaerobic microbial communities in benzene-contaminated groundwater

Aims:  To investigate the factors affecting benzene biodegradation and microbial community composition in a contaminated aquifer.
Methods and Results:  We identified the microbial community in groundwater samples from a benzene-contaminated aquifer situated below a petrochemical plant. Eleven out of twelve groundwater samples with in situ dissolved oxygen concentrations between 0 and 2·57 mg l⁻¹ showed benzene degradation in aerobic microcosm experiments, whereas no degradation in anaerobic microcosms was observed. The lack of aerobic degradation in the remaining microcosm could be attributed to a pH of 12·1. Three groundwaters, examined by 16S rRNA gene clone libraries, with low in situ oxygen concentrations and high benzene levels, each had a different dominant aerobic (or denitrifying) population, either Pseudomonas , Polaromonas or Acidovorax species. These groundwaters also had syntrophic organisms, and aceticlastic methanogens were detected in two samples. The alkaline groundwater was dominated by organisms closely related to Hydrogenophaga .
Conclusions:  Results show that pH 12·1 is inimical to benzene biodegradation, and that oxygen concentrations below 0·03 mg l⁻¹ can support aerobic benzene-degrading communities.
Significance and Impact of the Study:  These findings will help to guide the treatment of contaminated groundwaters, and raise questions about the extent to which aerobes and anaerobes may interact to effect benzene degradation.     

Thiamine increases β-glucosidase production in the newly isolated strain of Fomitopsis pinicola

Aims:  To isolate a high β-glucosidase (BGL)-producing strain and to optimize BGL production in the isolated strain.
Methods and Results:  A high BGL-producing strain was isolated and identified as Fomitopsis pinicola KMJ812 based on its morphology and a comparison of sequence of its internal transcribed spacer rDNA gene. To increase BGL production, F. pinicola was supplemented with various vitamins. Supplementation with thiamine (20 mg l⁻¹) improved BGL production in F. pinicola cultures by 3·7-fold to give a specific activity of 114·4 μmol min⁻¹ mg⁻¹ protein, one of the highest among BGL-producing micro-organisms. The increased production of BGL in the thiamine-supplemented culture was confirmed by 2D electrophoresis followed by MS/MS sequencing. The BGL purified from F. pinicola culture showed the highest catalytic efficiency ever reported.
Conclusion:  Supplemental thiamine remarkably increased BGL production by a novel BGL-producing strain, F. pinicola KMJ812.
Significance and Impact of the Study:  Our results provide a high BGL-producing strain and the production media for BGL production, and should contribute to better industrial production of glucose via biological processes.     

Effect of culturing processes and copper addition on laccase production by the white-rot fungus Fomes fomentarius MUCL 35117

Aim:  To produce high laccase activities from the white-rot fungus Fomes fomentarius .
Methods and Results:  Different culturing methods, viz, cell immobilization on stainless steel sponges and plastic material and solid-state fermentation (SSF) using wheat bran as substrate were used for laccase production by the white-rot fungus F. fomentarius . The SSF study expresses the highest laccase activities, nearly to 6400 U l⁻¹ after 13 days of laboratory flasks cultivation. When the wheat bran medium was supplemented with 2 mmol l⁻¹ copper sulfate, laccase activity increased by threefold in comparison to control cultures, reaching 27 864 U l⁻¹. With the medium thus optimized, further experiments were performed in a 3 l fixed-bed bioreactor (working volume 1·5 l) leading to a laccase activity of about 6230 U l⁻¹ on day 13.
Conclusions:  The results obtained clearly showed the superiority of wheat bran for laccase production over stainless steel sponges and plastic material. Supplementing the wheat bran solid medium with 2 mmol l⁻¹ copper sulfate allowed obtaining high activities at flask scale. The system was scaled to fixed-bed laboratory reactor.
Significance and Impact of the Study:  The high enzyme production along with the low-cost of the substrate, showed the suitability of the system F. fomentarius – SSF for industrial purposes.     

Studies on the production of actinomycin-D by Streptomyces griseoruber– a novel source

Aims:  To isolate and characterize bioactive metabolites produced by a micro-organism isolated from a soil sample associated with the roots of a medicinal plant, Azadirachta indica .
Methods and Results:  Morphological, cultural, physiological and 16S rRNA homology studies revealed that the organism showed 99% similarity with Streptomyces griseoruber NBRC 12873. One bioactive metabolite (Py2) isolated from the fermented broth was characterized as actinomycin-D (act-D). It showed high activity against various Gram-positive and Gram-negative bacterial cultures, Mycobacterium tuberculosis H37Rv and human neoplastic cells in vitro using standard protocols.
Conclusions:  The isolated strain S. griseoruber produced act-D predominantly (210 mg l⁻¹, c. 88% of the crude) under nonoptimized growth conditions.
Significance and Impact of the Study:  Streptomyces griseoruber may be exploited as a potential source for the commercial production of act-D, as this strain is not reported to produce act-D. Further investigations on the strain for commercial application will be of immense pharmaceutical importance.     

Batch marking of otoliths and fin spines to assess the stock enhancement of Argyrosomus japonicus

Juvenile mulloway Argyrosomus japonicus (54·6 ± 4·6 mm total length, mean ±  s . e .) were immersed in a range of oxytetracycline (OTC) solutions ranging between 0–600 mg l⁻¹ in salinities of 5 (diluted sea water) and 35 (undiluted sea water), and alizarin complexone (ALC) solutions ranging between 0–60 mg l⁻¹ in undiluted sea water, for 6, 12 and 24 h. Optimal marking conditions were 600 mg l⁻¹ OTC for 24 h in a salinity of 5, and 30 mg l⁻¹ ALC for 12 h respectively. Mark quality (MQ) was assessed using a score of 0–3 in both otoliths and anal fin spines, with a score >2 found to be acceptable for adequate mark identification. Acceptable marks were not produced using OTC in undiluted sea water. Immersion in OTC or ALC, or reduced salinity had no effect on survival relative to controls. Transverse sections of vertebrae from the ALC and OTC treatments with the highest otolith mark quality showed no discrete marks. Optimal marking techniques were used to produce double marks with a 3 day interval between marking, and marking techniques were applied to 130 000 juvenile mulloway in batch mode with minimal mortality. A numerical model of the chemical behaviour of OTC in sea water describes the decline of available OTC in increasing salinity, so that a species' salinity tolerance and successful marking can be optimized.     

The linamarase of Mucor circinelloides LU M40 and its detoxifying activity on cassava

Mucor circinelloides LU M40 produced 12·2 mU ml⁻¹ of linamarase activity when grown in a 3 l fermenter in the following optimized medium (g l⁻¹ deionized water): pectin, 10·0; (NH₄)₂SO₄,
1·0; KH₂PO₄, 2·0; Na₂HPO₄, 0·7; MgSO₄.7H₂O, 0·5; yeast extract, 1·0; Tween-80,
1·0, added after 48 h of fermentation. The purified linamarase was a dimeric protein with a molecular mass of 210 kDa; the enzyme showed optimum catalytic activity at pH 5·5 and 40 °C and had a wide range (3·0–7·0) of pH stability. The enzyme substrate specificity on plant cyanogenic glycosides was wide; the K_m value for linamarin was 2·93 mmol l⁻¹. The addition, before processing, of the fungal crude enzyme to cassava roots facilitated and shortened detoxification; after 24 h of fermentation, all cyanogenic glycosides were hydrolysed.     

3-Methylindole production is regulated in Clostridium scatologenes ATCC 25775

Aims:  3-Methylindole (3-MI) is a degradation product of l -tryptophan and is both an animal waste malodorant and threat to ruminant health. Culture conditions influencing 3-MI production in Clostridium scatologenes ATCC 25775 were investigated.
Methods and Results:  Extracellular 3-MI levels in cells cultured in brain heart infusion (BHI) medium (pH 7·0) at 33°C and 37°C for 72 h were 907 ± 38 and 834 ± 121  μ mol l⁻¹, respectively. Cells cultured in tryptone-yeast (TY) extract medium at 37°C for 48 h produced 104 ± 86  μ mol l⁻¹ 3-MI; however, addition of 1 mmol l⁻¹  l -tryptophan failed to increase extracellular levels (113 ± 50  μ mol l⁻¹ 3-MI). Specific activity of indole acetic acid decarboxylase measured in BHI, TY and TY plus 1 mmol l⁻¹ tryptophan-grown cells displayed 35-, 33- and 76-fold higher levels than in semi-defined medium-grown cells.
Conclusions:  When cultured in rich medium, at 33°C or 37°C and pH 7·0, Cl. scatologenes ATCC 25775 optimally produced 3-MI. Addition of l- tryptophan to medium did not lead to significant increases in extracellular 3-MI levels. Whole cell assays indicate growth in rich medium significantly up-regulated 3-MI production.
Significance and Impact of the Study:  Information presented here may prove useful in understanding what factors influence 3-MI production in malodorous animal wastes.