PPL catalyzed monoesterification of α,ω-dicarboxylic acids

Summary A regioselective strategy for PPL catalysed monoesterification of aliphatic ,-dicarboxylic acids with n-butanol have been developed. In addition to high regioselectivity, the method also ensures chemoselective esterification of a saturated acid moiety in presence of a conjugated acid function.     

Construction of an expression system for the secretory production of recombinant α-agarase in yeast

α-Agarase hydrolyzes the α-1,3 linkage of agarose yielding agaro-oligosaccharides. It is less well characterized than β-agarase. AgaA gene (2.3 kb ORF), encoding the α-agarase from Thalassomonas JAMB A33, was subcloned into both a constitutive and an inducible expression vector. Both the constructed plasmids, pVT-AgaA (ADH1 promoter) and pYInu-AgaA (GAL10 promoter), were transformed into Saccharomyces cerevisiae SEY2102 and FY833 and pPIC9-AgaA harboring the AOX1 promoter was transformed into Pichia pastoris GS115. The recombinant α-agarases were over-expressed with activities from 0.3 to 1.6 unit/ml, the highest being in the SEY2102/pYInu-AgaA transformant. Most of the recombinant α-agarase was extracellular because each plasmid possesses a signal sequence for the secretory production of α-agarase. In contrast, the Pichia host-vector expression system was unsuitable for the production of recombinant α-agarase. This is the first report of recombinant production of α-agarase in yeast for industrial use.     

<Emphasis Type="Italic">Candida guilliermondii</Emphasis> as a potential biocatalyst for the production of long-chain α,ω-dicarboxylic acids

Objectives

To explore Candida guilliermondii for the production of long-chain dicarboxylic acids (DCA), we performed metabolic pathway engineering aiming to prevent DCA consumption during β-oxidation, but also to increase its production via the ω-oxidation pathway.

Results

We identified the major β- and ω-oxidation pathway genes in C. guilliermondii and performed first steps in the strain improvement. A double pox disruption mutant was created that slowed growth with oleic acid but showed accelerated DCA degradation. Increase in DCA production was achieved by homologous overexpression of a plasmid borne cytochrome P450 monooxygenase gene.

Conclusion

C. guilliermondii is a promising biocatalyst for DCA production but further insight into its fatty acid metabolism is necessary.

     

Biocatalytic,one-pot diterminal oxidation and esterification of n-alkanes for production of α,ω-diol and α,ω-dicarboxylic acid esters

Direct and selective terminal oxidation of medium-chain n-alkanes is a major challenge in chemistry. Efforts to achieve this have so far resulted in low specificity and overoxidized products. Biocatalytic oxidation of medium-chain n-alkanes – with for example the alkane monooxygenase AlkB from P. putida GPo1- on the other hand is highly selective. However, it also results in overoxidation. Moreover, diterminal oxidation of medium-chain n-alkanes is inefficient. Hence, α,ω-bifunctional monomers are mostly produced from olefins using energy intensive, multi-step processes.By combining biocatalytic oxidation with esterification we drastically increased diterminal oxidation upto 92 mol% and reduced overoxidation to 3% for n-hexane. This methodology allowed us to convert medium-chain n-alkanes into α,ω-diacetoxyalkanes and esterified α,ω-dicarboxylic acids. We achieved this in a one-pot reaction with resting-cell suspensions of genetically engineered Escherichia coli.The combination of terminal oxidation and esterification constitutes a versatile toolbox to produce α,ω-bifunctional monomers from n-alkanes.     

Characteristics of an aqueous two-phase system for α-amylase production

The characteristics of an aqueous two-phase system for the overproduction of extracellular enzyme through α-amylase fermentation by Bacillus amyloliquefaciens were investigated. With higher molecular weight of polyethylene glycol (PEG) or lower molecular weight of dextran, the partition coefficient of α-amylase was increased. α-Amylase biosynthesis was increased when PEG 6000 was included in the medium compared to the medium without PEG. Phosphate addition to the PEG-dextran system improved the partition coefficient of α-amylase, but deactivated α-amylase severely. By using sodium sulfate instead of phosphate, α-amylase deactivation was negligible, and high partitioning of the enzyme in the top phase was obtained.     

Bicyclic α,ω-dicarboxylic acid derivatives from a colonial tunicate of the family Polyclinidae

In the course of our search for bioactive metabolites from a colonial tunicate of the family Polyclinidae, six new (1–6) cyclic fatty acid derivatives were isolated. Their planar structures were established on the basis of NMR and MS spectroscopic analyses. The relative configuration was determined by NOESY experiment. Compounds 1–6 represent a fused bicyclic skeleton possibly derived from α,ω-dicarboxylic acids such as eicosanedioic acid or docosanedioic acid via a Diels–Alder type of cyclization. Compounds 1–4 and 6 showed mild cytotoxicity against a panel of five human solid tumor cell lines.     

Engineering Escherichia coli for the synthesis of short- and medium-chain α,β-unsaturated carboxylic acids

Concerns over sustained availability of fossil resources along with environmental impact of their use have stimulated the development of alternative methods for fuel and chemical production from renewable resources. In this work, we present a new approach to produce α,β-unsaturated carboxylic acids (α,β-UCAs) using an engineered reversal of the β-oxidation (r-BOX) cycle. To increase the availability of both acyl-CoAs and enoyl-CoAs for α,β-UCA production, we use an engineered Escherichia coli strain devoid of mixed-acid fermentation pathways and known thioesterases. Core genes for r-BOX such as thiolase, hydroxyacyl-CoA dehydrogenase, enoyl-CoA hydratase, and enoyl-CoA reductase were chromosomally overexpressed under the control of a cumate inducible phage promoter. Native E. coli thioesterase YdiI was used as the cycle-terminating enzyme, as it was found to have not only the ability to convert trans-enoyl-CoAs to the corresponding α,β-UCAs, but also a very low catalytic efficiency on acetyl-CoA, the primer and extender unit for the r-BOX pathway. Coupling of r-BOX with YdiI led to crotonic acid production at titers reaching 1.5 g/L in flask cultures and 3.2 g/L in a controlled bioreactor. The engineered r-BOX pathway was also used to achieve for the first time the production of 2-hexenoic acid, 2-octenoic acid, and 2-decenoic acid at a final titer of 0.2 g/L. The superior nature of the engineered pathway was further validated through the use of in silico metabolic flux analysis, which showed the ability of r-BOX to support growth-coupled production of α,β-UCAs with a higher ATP efficiency than the widely used fatty acid biosynthesis pathway. Taken together, our findings suggest that r-BOX could be an ideal platform to implement the biological production of α,β-UCAs.     

Genetic and biochemical evidence for involvement of HOTHEAD in the biosynthesis of long-chain α-,ω-dicarboxylic fatty acids and formation of extracellular matrix

In plants, extracellular matrix polymers built from polysaccharides and cuticular lipids have structural and protective functions. The cuticle is found to be ten times thinner in Arabidopsis thaliana (L.) Heynh than in many other plants, and there is evidence that it is unusual in having a high content of α-,ω-dicarboxylic fatty acids (FAs) in its polyesters. We designated the new organ fusion mutant hth-12 after it appeared to be allelic to adhesion of calyx edges (ace) and hothead (hth), upon molecular cloning of the gene by transposon tagging. This mutant is deficient in its ability to oxidize long-chain ω-hydroxy FAs to ω-oxo FAs, which results in leaf polyesters in decreased α-,ω-dicarboxylic FAs and increased ω-hydroxy FAs. These chemical phenotypes lead to disorder of the cuticle membrane structure in hth-12. ACE/HTH is a single-domain protein showing sequence similarity to long-chain FA ω-alcohol dehydrogenases from Candida species, and we hypothesize that it may catalyze the next step after cytochrome P450 FA ω-hydroxylases in the ω-oxidation pathway. We show that ACE/HTH is specifically expressed in epidermal cells. It appears very likely therefore that the changes in the amount of α-,ω-dicarboxylic FAs in hth-12 reflect the different composition of cuticular polyesters. The ACE/HTH gene is also expressed in root epidermal cells which do not form a polyester membrane on the exterior surface, thereby making it possible that the end products of the pathway, α-,ω-dicarboxylic FAs, are generally required for the cross-linking that ensures the integrity of the outer epidermal cell wall.     

Synthesis of the α,ω-dicarboxylic acid precursor of biotin by the canonical fatty acid biosynthetic pathway

Biotin synthesis requires the C7 α,ω-dicarboxylic acid, pimelic acid. Although pimelic acid was known to be primarily synthesized by a head to tail incorporation of acetate units, the synthetic mechanism was unknown. It has recently been demonstrated that in most bacteria the biotin pimelate moiety is synthesized by a modified fatty acid synthetic pathway in which the biotin synthetic intermediates are O-methyl esters disguised to resemble the canonical intermediates of the fatty acid synthetic pathway. Upon completion of the pimelate moiety, the methyl ester is cleaved. A very restricted set of bacteria have a different pathway in which the pimelate moiety is formed by cleavage of fatty acid synthetic intermediates by BioI, a member of the cytochrome P450 family.     

Biosynthesis of diverse α,ω-diol-derived polyhydroxyalkanoates by engineered Halomonas bluephagenesis

Polyhydroxyalkanoates (PHA) are a family of biodegradable and biocompatible plastics with potential to replace petroleum based plastics. Diversity of PHA monomer structures provides flexibility in material properties to suit more applications. In this study, 5-hydroxyvalerate (5HV) synthesis pathway was established based on intrinsic alcohol/aldehyde dehydrogenases. The PHA polymerase cloned from Cupriavidus necator functions to polymerize 5HV into its copolymers in ratios ranging from 8% to 32%. Elastic copolymer P(85% 3HB-co-15% 5HV) was generated with an elongation at break and a Young's modulus of 1283% and 73.1 MPa, respectively. The recombinant H. bluephagenesis was able to convert various diols including 1, 3-propanediol, 1, 4-butanediol and 1, 5-pentanediol into PHA, leading to 13 PHA polymers including transparent P(53% 3HB-co-20% 4HB-co-27% 5HV) and sticky P(3HB-co-3HP-co-4HB-co-5HV). The engineered H. bluephagenesis was successfully grown in a 7-L bioreactor to produce the highly elastic P(85% 3HB-co-15% 5HV) and the sticky P(3HB-co-3HP-co-4HB-co-5HV), demonstrating their potential for industrial scale-up.     

A high-throughput screen for the engineered production of β-lactam antibiotics

High-throughput screens and selections have had profound impact on our ability to engineer proteins possessing new, desired properties. These methods are especially useful when applied to the modification of existing enzymes to create natural and unnatural products. In an advance upon existing methods we developed a high-throughput, genetically regulated screen for the in vivo production of β-lactam antibiotics using a green fluorescent protein (gfp) reporter. This assay proved reliable and sensitive and presents a dynamic range under which a wide array of β-lactam architectural subclasses can be detected. Moreover, the graded response elicited in this assay can be used to rank mutant activity. The utility of this development was demonstrated in vivo and then applied to the first experimental investigation of a putative catalytic residue in carbapenem synthase (CarC). Information gained about the mutability of this residue defines one parameter for enzymatic activity and sets boundaries for future mechanistic and engineering efforts.     

Production of poly(3-hydroxyalkanoates) from α, ω-alkanedioic acids and hydroxylated fatty acids by Alcaligenes sp.

Summary Poly(3-hydroxybutyrate) (P(3HB)) was produced from a series of , -alkanedioic acids of both even and odd carbon numbers by the Alcaligenes sp. AK201. In contrast, copolymers of 3HB and 3-hydroxyvalerate(P(3HB-co-3HV)) were produced from hydroxylated fatty acids of even carbon numbers such as 12-hydroxystearate and 2-hydroxyoctanoate. The biosynthetic pathways to poly(3-hydroxyalkanoates)(P(3HA)) are discussed.     

Lepidopteran cells,an alternative for the production of recombinant antibodies?

Monoclonal antibodies are used with great success in many different therapeutic domains. In order to satisfy the growing demand and to lower the production cost of these molecules, many alternative systems have been explored. Among them, the baculovirus/insect cells system is a good candidate. This system is very safe, given that the baculoviruses have a highly restricted host range and they are not pathogenic to vertebrates or plants. But the major asset is the speed with which it is possible to obtain very stable recombinant viruses capable of producing fully active proteins whose glycosylation pattern can be modulated to make it similar to the human one. These features could ultimately make the difference by enabling the production of antibodies with very low costs. However, efforts are still needed, in particular to increase production rates and thus make this system commercially viable for the production of these therapeutic agents.     

Enhanced production of α-ketoglutarate by fed-batch culture in the metabolically engineered strains of Corynebacterium glutamicum

The fed-batch culture system was employed to enhance production of α-ketoglutarate (α-KG) by the strainsof Corynebacterium glutamicum, whose genes encoding the key enzymes responsible for the biosynthesis of L-glutamate from α-KG were deleted. In a shake flask fermentation, C. glutamicum JH110 in which the 3 genes, gdh (encoding glutamate dehydrogenase), gltB (encoding glutamate synthase), and aceA (encoding isocitrate lyase) were disrupted showed the highest production of α-KG (12.4 g/L) compared to the strains JH102 (gdh mutant), JH103 (gltB mutant), and JH107 (gdh gltB double mutant). In the fed-batch cultures using a 5 L-jar fermenter, the strain JH107 produced more α-KG (19.5 g/L), but less glutamic acid (23.3 g/L) than those produced by the parent strain HH109, as well as JH102. The production of α-KG was significantly enhanced and the accumulation of glutamicacid was minimized by the ammonium-limited fed-batch cultures employing C. glutamicum JH107. Further improvement of α-KG production by the strain JH107 was achieved through the ammonium-limited fed-batch culture with the feeding of molasses, and the levels of α-KG and glutamic acid produced were 51.1 and 0.01 g/L, respectively.     

Dynamic control of gene expression in Saccharomyces cerevisiae engineered for the production of plant sesquitepene α-santalene in a fed-batch mode

Microbial cells engineered for efficient production of plant sesquiterpenes may allow for sustainable and scalable production of these compounds that can be used as e.g. perfumes and pharmaceuticals. Here, for the first time a Saccharomyces cerevisiae strain capable of producing high levels of α-santalene, the precursor of a commercially interesting compound, was constructed through a rationally designed metabolic engineering approach. Optimal sesquiterpene production was obtained by modulating the expression of one of the key metabolic steps of the mevalonate (MVA) pathway, squalene synthase (Erg9). To couple ERG9 expression to glucose concentration its promoter was replaced by the HXT1 promoter. In a second approach, the HXT2 promoter was used to express an ERG9 antisense construct. Using the HXT1 promoter to control ERG9 expression, it was possible to divert the carbon flux from sterol synthesis towards α-santalene improving the productivity by 3.4 fold. Combining this approach together with the overexpression of a truncated form of 3-hydroxyl-3-methyl-glutaryl-CoA reductase (HMGR) and deletion of lipid phosphate phosphatase encoded by LPP1 led to a strain with a productivity of 0.18mg/gDCWh. The titer was further increased by deleting DPP1 encoding a second FPP consuming pyrophosphate phosphatase yielding a final productivity and titer, respectively, of 0.21mg/gDCWh and 92mg/l of α-santalene.     

Novel formation of α-amino acid from α-oxo acids and ammonia in an aqueous medium

In the course of a study of possible mechanisms for chemical evolution in the primeval sea, we found the novel formation of -amino acids and N-acylamino acids from -oxo acids and ammonia in an aqueous medium. Glyoxylic acid reacted with ammonia to form N-oxalylglycine, which gave glycine in a 5–39% yield after hydrolysis with 6N HCl. Pyruvic acid and ammonia reacted to give N-acetylalanine, which formed alanine in a 3–7% overall yield upon hydrolysis. The pH optima in these reactions were between pH 3 and 4. These reactions were further extended to the formation of other amino acids. Glutamic acid, phenylalanine and alanine were formed from -ketoglutaric acid, phenylpyruvic acid and oxaloacetic acid, respectively, under similar conditions. N-Succinylglutamic acid was obtained as an intermediate in glutamic acid synthesis. Phenylacetylphenyl-alanineamide was also isolated as an intermediate in phenylalanine synthesis. Alanine, rather than aspartic acid, was produced from oxaloacetic acid. These reactions provide a novel route for the prebiotic synthesis of amino acids. A mechanism for the reactions will be proposed.     

A method for the separation of peptides and α-amino acids

1. Peptides and alpha-amino acids, occurring in mixtures from various sources, can be separated into one fraction containing the amino acids and several peptide fractions. This is achieved by chelation of the mixture with Cu(2+) ions and subsequent chromatography of these chelates over the acetate form of diethylaminoethylcellulose or triethylaminoethylcellulose. 2. The amino acid fraction is obtained by elution with 0.01m-collidine-acetate buffer, pH8.0. 3. Peptide fractions are eluted with 0.01m-collidine-acetate buffer, pH4.5, 0.17n-acetic acid and 0.1n-hydrochloric acid respectively. 4. With the exception of aspartic acid and glutamic acid, which are partly found in the acidic peptide fraction, the amino acids are completely separated from the peptides. 5. Contamination of the acidic peptide fraction with glutamic acid and aspartic acid can be largely avoided by previous addition of an excess of arginine. 6. Copper is removed from the eluates by extraction with 8-hydroxyquinoline in chloroform.     

Integrated engineering of β-oxidation reversal and ω-oxidation pathways for the synthesis of medium chain ω-functionalized carboxylic acids

An engineered reversal of the β-oxidation cycle was exploited to demonstrate its utility for the synthesis of medium chain (6–10-carbons) ω-hydroxyacids and dicarboxylic acids from glycerol as the only carbon source. A redesigned β-oxidation reversal facilitated the production of medium chain carboxylic acids, which were converted to ω-hydroxyacids and dicarboxylic acids by the action of an engineered ω-oxidation pathway. The selection of a key thiolase (bktB) and thioesterase (ydiI) in combination with previously established core β-oxidation reversal enzymes, as well as the development of chromosomal expression systems for the independent control of pathway enzymes, enabled the generation of C₆–C₁₀ carboxylic acids and provided a platform for vector based independent expression of ω-functionalization enzymes. Using this approach, the expression of the Pseudomonas putida alkane monooxygenase system, encoded by alkBGT, in combination with all β-oxidation reversal enzymes resulted in the production of 6-hydroxyhexanoic acid, 8-hydroxyoctanoic acid, and 10-hydroxydecanoic acid. Following identification and characterization of potential alcohol and aldehyde dehydrogenases, chnD and chnE from Acinetobacter sp. strain SE19 were expressed in conjunction with alkBGT to demonstrate the synthesis of the C₆–C₁₀ dicarboxylic acids, adipic acid, suberic acid, and sebacic acid. The potential of a β-oxidation cycle with ω-oxidation termination pathways was further demonstrated through the production of greater than 0.8 g/L C₆–C₁₀ ω-hydroxyacids or about 0.5 g/L dicarboxylic acids of the same chain lengths from glycerol (an unrelated carbon source) using minimal media.     

High-level Expression of an α-l-arabinofuranosidase from Thermotoga maritima in Escherichia coli for the Production of Xylobiose from Xylan

To efficiently produce xylobiose from xylan, high-level expression of an α-l-arabinofuranosidase gene from Thermotoga maritima was carried out in Escherichia coli. A 1.5-kb DNA fragment, coding for an α-l-arabinofuranosidase of T. maritima, was inserted into plasmid pET-20b without the pelB signal sequence leader, and produced pET-20b-araA1 with 8 nt spacing between ATG and Shine–Dalgarno sequence. A maximum activity of 12 U mg⁻¹ was obtained from cellular extract of E. coli BL21-CodonPlus (DE3)-RIL harboring pET-20b-araA1. The over-expressed α-l-arabinofuranosidase was purified 13-fold with a 94% yield from the cellular extract of E. coli by a simple heat treatment. Production of xylooligosaccharides from corncob xylan by endoxylanase and α-l-arabinofuranosidase was examined by TLC and HPLC: xylobiose was the major product from xylan at 90 °C and its proportion in the xylan hydrolyzates increased with the reaction time. Hydrolysis with in the xylanase absence of α-l-arabinofuranosidase gave only half this yield. Revisions requested 27 October 2005; Revisions received 5 September 2005