Oriented Adhesion of Escherichia coli to Polystyrene Particles

The adhesion of nonflagellated Escherichia coli strain K-12 to polystyrene (PS) latex spheres or glass capillaries has been observed by using several techniques. Attention was focused on the orientation of the rod-shaped bacteria as they adhered to the surfaces in 100 mM phosphate-buffered saline. Data show that PS particles adhered to the ends of the bacteria more than 90% of the time. Moreover, the PS particles adhered to one end only, never to both. Similarly, for experiments with bacteria adhering to glass, the bacteria adhered on their ends. In order to determine whether the end of a bacterium had a different charge density from that of the middle, rotational electrophoresis experiments were used. These experiments indicated no measurable charge nonuniformity. In order to examine how strongly adhered the bacteria were to the PS particles, differential electrophoresis was used. Almost always, bacteria were found to be irreversibly adhered to the PS spheres. The cause of the oriented adhesion is not likely due to surface lipopolysaccharides (LPS), since the three strains of K-12 that were used, each having a different length of LPS, showed similar behavior. The results are discussed in terms of bacterial cell polarity. The data indicate that nanodomains on the bacterial ends are important for adhesion and that the time scale for irreversible adhesion is short.     

Influence of subinhibitory concentrations of cefotaxime, imipenem and ciprofloxacin on adhesion of Escherichia coli strains to polystyrene

The present study investigated the ability of sub MICs of cefotaxime, imipenem and ciprofloxacin to interfere with adhesion of E. coli strains to polystyrene (selected polymer used in studies on microorganisms' adhesion). It was observed that cefotaxime and imipenem at 1/2 and 1/4 MICs decreased the adherence of E. coli strains to polystyrene significantly. 1/2, 1/4 and 1/8 MICs of ciprofloxacin generally decreased the adhesive properties of E. coli strains, but two E. coli strains showed a noticeable enhancement of adhesion after incubation at sub MICs of this antibiotic.     

Binding of plasminogen to Escherichia coli adhesion proteins

Immobilization of plasminogen via its lysine-binding sites is regarded as a prerequisite for its activation and function in fibrinolysis and pericellular proteolysis. In the present study, the interaction of plasminogen with fimbriae found on Escherichia coli strains causing invasive human infections was studied. Plasminogen displayed concentration-dependent and saturable binding to immobilized type 1 fimbriae and, several fold lower binding to P and S fimbriae. The binding to fimbriae was effectively inhibited by -aminocaproic acid indicating that it was mediated by the lysine-binding sites of plasminogen. Binding studies with mutated fimbriae and inhibition tests indicated that the interaction was not dependent on the lectin subunit of the fimbriae. These results indicate the existence of a novel type of host-microbe interaction which may be important in the invasion by bacteria of host tissues.     

紫锥菊多糖抑制致病性大肠埃希菌细胞黏附的试验研究

目的研究紫锥菊多糖能否影响致病性大肠埃希菌对细胞的黏附。方法使用PK-15细胞进行黏附试验及黏附抑制试验。结果发现紫锥菊多糖浓度为1.6 mg/ml时,对细菌黏附细胞的抑制作用最好,黏附率由50个细菌/细胞降低到6.8个细菌/细胞。结论紫锥菊多糖对致病性大肠埃希菌的细胞黏附具有抑制作用,提示该多糖具有调节肠道微生态的潜在应用价值。     

Comparison between the adhesion to solid substrata of Streptococcus mitis and that of polystyrene particles

The adhesion of Streptococcus mitis to solid substrata from phosphate suspensions with various ionic strengths was studied and compared with the adhesion of polystyrene particles. At all ionic strengths, the interfacial free energy of adhesion governed the relative number of bacteria or polystyrene particles adhering at equilibrium, except that in a low-ionic-strength buffer, adhesion occurred less frequently because of increased electrostatic repulsion. Large differences between bacterial and polystyrene particle adhesion were observed, as indicated by the ratio of bacteria to polystyrene particles adhering, which decreased from 30 to 4 with a change from low to high ionic strength.     

Oriented fragmentation of Escherichia coli sacculi by sonication.

Isolated murein sacculi of Escherichia coli PA3092 were physically ruptured by sonication. Electron microscopical analysis showed that the rupturing occurred preferentially prependicular to the long axis of the cell. The fragmentation of the sacculi increased with longer sonication times. It was found that the extent of cross-linkage was more affected by the sonication than was the average glycan chain length. These data confirm earlier observations and indicate that the glycan chains run predominantly perpendicular to the long axis of the cell. By contrast, the peptide cross-links are more dispersely oriented.     

Mammalian and Escherichia coli signal recognition particles

Recent evidence from both biochemical and genetic studies indicates that protein targeting to the pro-karyotic cytoplasmic membrane and the eukaryotic endoplasmic reticulum membrane may have more in common than previously thought. A ribonucleo-protein particle was identified in Escherichia coli that consists of at least one protein (P48 or Ffh) and one RNA molecule (4.5S RNA), both of which exhibit strong sequence similarity with constituents of the mammalian signal recognition particle (SRP). Like the mammalian SRP, the E. coli SRP binds specifically to the signal sequence of presecretory proteins. Depletion of either P48 or 4.5S RNA affects translation and results in the accumulation of precursors of several secreted proteins. This review discusses these recent studies and speculates on the position of the SRP in the complex network of protein interactions involved in translation and membrane targeting in E. coli.     

Comparison between the adhesion to solid substrata of Streptococcus mitis and that of polystyrene particles.

The adhesion of Streptococcus mitis to solid substrata from phosphate suspensions with various ionic strengths was studied and compared with the adhesion of polystyrene particles. At all ionic strengths, the interfacial free energy of adhesion governed the relative number of bacteria or polystyrene particles adhering at equilibrium, except that in a low-ionic-strength buffer, adhesion occurred less frequently because of increased electrostatic repulsion. Large differences between bacterial and polystyrene particle adhesion were observed, as indicated by the ratio of bacteria to polystyrene particles adhering, which decreased from 30 to 4 with a change from low to high ionic strength.     

Enzymic detection of adhesion of enteropathogenic Escherichia coli to HEp-2 cells

We established a new method for detecting enteropathogenic Escherichia coli adhering to HEp-2 cells. An essential part of the method is an assay of beta-galactosidase activity of adhered bacterial cells. It consisted of the following steps: (1) culture of bacterial cells in a medium containing isopropyl-thio-beta-D-galactoside, an inducer of beta-galactosidase; (2) incubation of a bacterial culture with monolayered HEp-2 cells in a 96-well culture plate; (3) washing wells to remove bacterial cells which did not adhere to HEp-2 cells, and (4) enzymic reaction for beta-galactosidase activities. However, a calibration curve for the enzyme activity, obtained from each bacterial sample, showed that 10(5) bacteria per well permitted an accurate estimation. The enzyme activity of adhered bacteria to the monolayered cells showed that 10(7) bacteria were appropriate for the adherence assay. The number of adhered bacteria thus obtained was in good agreement with a viable cell count. The result indicates that the new method is more reliable than a widely used method, counting the number of bacteria under a microscope. The present method also makes it easy to detect adherent strains of E. coli in large numbers of specimens.     

Microrheological aspects of adhesion of Escherichia coli on glass

The adhesion of both live and fixed bacteria (Escherichia coli) on glass has been studied under well-defined hydrodynamic conditions, created in an impinging jet apparatus. With this technique one can accurately measure the initial deposition rate jo on the surface, the average lifetime of a bacterium on the surface, tau esc, and the surface area blocked per deposited bacterium, normalized by its projected area, gamma. The experimental results are compared to theoretical results for equivalent spheres. It is found that near the stagnation point the deposition rate jo is mainly controlled by convective diffusive transport which, for rod-shaped Eschericia coli, with an axis ratio of about 2, is found to be equal to that for spheres. No differences in jo and tau esc were found between live and fixed bacteria at low flow rates. At high flow rates fixed bacteria adhered to the surface at a slower rate. In both systems jo was found to decrease suddenly at a distance of about 150 microns from the stagnation point, in contrast to systems of spherical particles for which jo is uniform over the surface. Most likely this is due to the rotation of the rod-shaped particles, which vary their distance to the surface periodically with time. The main difference between live and fixed bacteria, besides different deposition rates in strong flows, is that gamma is about 30% larger for fixed bacteria than for live ones, resulting in a much lower final coverage for fixed bacteria. These results imply a larger repulsion between fixed bacteria than between living ones. From detachment experiments we can conclude that not all bacteria stick to the surface with the same bond strength. The variation in the bond strength is due to the aging of the bonds between the bacteria and the surface. The average bond strength corresponds to an energy of about 13-15 kT.     

Shear-dependent 'stick-and-roll' adhesion of type 1 fimbriated Escherichia coli

It is generally assumed that bacteria are washed off surfaces as fluid flow increases because they adhere through 'slip-bonds' that weaken under mechanical force. However, we show here that the opposite is true for Escherichia coli attachment to monomannose-coated surfaces via the type 1 fimbrial adhesive subunit, FimH. Raising the shear stress (within the physiologically relevant range) increased accumulation of type 1 fimbriated bacteria on monomannose surfaces by up to two orders of magnitude, and reducing the shear stress caused them to detach. In contrast, bacterial binding to anti-FimH antibody-coated surfaces showed essentially the opposite behaviour, detaching when the shear stress was increased. These results can be explained if FimH is force-activated; that is, that FimH mediates 'catch-bonds' with mannose that are strengthened by tensile mechanical force. As a result, on monomannose-coated surfaces, bacteria displayed a complex 'stick-and-roll' adhesion in which they tended to roll over the surface at low shear but increasingly halted to stick firmly as the shear was increased. Mutations in FimH that were predicted earlier to increase or decrease force-induced conformational changes in FimH were furthermore shown here to increase or decrease the probability that bacteria exhibited the stationary versus the rolling mode of adhesion. This 'stick-and-roll' adhesion could allow type 1 fimbriated bacteria to move along mannosylated surfaces under relatively low flow conditions and to accumulate preferentially in high shear regions.     

Interaction of Escherichia coli and soil particles in runoff

A laboratory-scale model system was developed to investigate the transport mechanisms involved in the horizontal movement of bacteria in overland flow across saturated soils. A suspension of Escherichia coli and bromide tracer was added to the model system, and the bromide concentration and number of attached and unattached E. coli cells in the overland flow were measured over time. Analysis of the breakthrough curves indicated that the E. coli and bromide were transported together, presumably by the same mechanism. This implied that the E. coli was transported by advection with the flowing water. Overland-flow transport of E. coli could be significantly reduced if the cells were preattached to large soil particles (> 45 microm). However, when unattached cells were inoculated into the system, the E. coli appeared to attach predominantly to small particles (< 2 microm) and hence remained unattenuated during transport. These results imply that in runoff generated by saturation-excess conditions, bacteria are rapidly transported across the surface and have little opportunity to interact with the soil matrix.     

Surface characteristics and adhesion of Escherichia coli and Staphylococcus epidermidis

Surface hydrophobicity, surface electrokinetic potential and the ability to adhere to nitric-acid cleansed glass surfaces has been assessed throughout the growth, in batch culture, of Escherichia coli and Staphylococcus epidermidis . In both instances adhesiveness and surface hydrophobicity decreased in early- to mid-exponential phase. Cell surface charge, on the other hand became more electro-negative for E. coli but electro-neutral for Staph. epidermidis as the cells proceeded to divide. Adhesiveness correlated directly with surface electronegativity and hydrophobicity for Staph. epidermidis but inversely with surface electro-negativity for E. coli.     

Role of capsular colanic acid in adhesion of uropathogenic Escherichia coli

Urinary tract infections are the most common urologic disease in the United States and one of the most common bacterial infections of any organ system. Biofilms persist in the urinary tract and on catheter surfaces because biofilm microorganisms are resistant to host defense mechanisms and antibiotic therapy. The first step in the establishment of biofilm infections is bacterial adhesion; preventing bacterial adhesion represents a promising method of controlling biofilms. Evidence suggests that capsular polysaccharides play a role in adhesion and pathogenicity. This study focuses on the role of physiochemical and specific binding interactions during adhesion of colanic acid exopolysaccharide mutant strains. Bacterial adhesion was evaluated for isogenic uropathogenic Escherichia coli strains that differed in colanic acid expression. The atomic force microscope (AFM) was used to directly measure the reversible physiochemical and specific binding interactions between bacterial strains and various substrates as bacteria initially approach the interface. AFM results indicate that electrostatic interactions were not solely responsible for the repulsive forces between the colanic acid mutant strains and hydrophilic substrates. Moreover, hydrophobic interactions were not found to play a significant role in adhesion of the colanic acid mutant strains. Adhesion was also evaluated by parallel-plate flow cell studies in comparison to AFM force measurements to demonstrate that prolonged incubation times alter bacterial adhesion. Results from this study demonstrate that the capsular polysaccharide colanic acid does not enhance bacterial adhesion but rather blocks the establishment of specific binding as well as time-dependent interactions between uropathogenic E. coli and inert substrates.