Platinum(II) complexes of chelating and monodentate thiourea monoanions incorporating chiral, fluorescent or chromophoric groups

The reaction of cis-[PtCl₂(PPh₃)₂] with trisubstituted thioureas [R¹R²NC(=S)NHR³] in refluxing methanol with triethylamine base, followed by addition of NaBPh₄ gives the salts [Pt{SC(=NR¹R²)NR³}(PPh₃)₂]BPh₄ in high yield; a range of thiourea substituents, including chiral, fluorescent and chromophoric groups can be incorporated. The azo dye-derived complex [Pt{SC(=N(CH₂CH₂)₂O)NC₆H₄N=NC₆H₄NMe₂}(PPh₃)₂]BPh₄ has been characterised by a single-crystal X-ray diffraction study. The formation of a fluorescein-derivatised platinum–thiourea complex is also described. Reaction of cis-[PtCl₂(PPh₃)₂] with PhNHC(S)NHPh or EtNHC(S)NHEt, triethylamine and NaBPh₄ gives, respectively, [Pt{SC(=NHPh)NPh}(PPh₃)₂]⁺ and the known cation [Pt{SC(=NHEt)NEt}(PPh₃)₂]⁺, isolated as tetraphenylborate salts. Reaction of cis-[PtCl₂(PPh₃)₂] with an excess of Na[MeNHC(S)NCN] in methanol gives the bis(thiourea monoanion) complex trans-[Pt{SC(=N---CN)NHMe}₂(PPh₃)₂], characterised by NMR spectroscopy and an X-ray crystal structure determination. When cis-[PtCl₂(PPh₃)₂] is reacted with 1 equiv. of Na[MeNHC(S)N---CN] in methanol, with added NaBPh₄, a mixture of isomers of the [Pt{SC(=NHCN)NMe}(PPh₃)₂]⁺ cation is obtained.     

Interactions between thiamine and large anions. Crystal structures of (H-thiamine)[Pt(SCN)4] · 3H2O and (H-thiamine)[Pt(SCN)6] · H2O

The reaction of thiamine with K₂Pt^IICl₄ and with Pt^IVCl₄ in the presence of excess NaSCN in aqueous solution gave thiamine salts, (H-thiamine)[Pt(SCN)₄] · 3H₂O (1) and (H-thiamine)[Pt(SCN)₆] · H₂O (2), respectively, structures of which have been determined by X-ray diffraction. The thiamine molecule adopts the usual F conformation in each salt. In 1, [Pt(SCN)₄]²⁻ ions act as large planar spacers in the crystal lattice and interact scarcely with thiamine, except for a hydrogen bonding with the terminal hydroxy O(5γ). Instead, water molecules form two types of host–guest-like interactions with the pyrimidine and the thiazolium moieties of a thiamine molecule, one being a C(2)–Hwaterpyrimidine bridge and the other being an N(4′)–Hwaterthiazolium bridge. In 2, despite the much larger ion size, octahedral [Pt(SCN)₆]²⁻ ions form a C(2)–Hanionpyrimidine bridge and an N(4′)–Hanionthiazolium bridge. An additional hydrogen bonding between the anion and the terminal O(5γ) of thiamine creates a hydrogen-bonded macrocyclic ring {thiaminium–[Pt(SCN)₆]²⁻}₂, a supramolecule.     

Steric control in the formation of Co2(CO)6-alkyne complexes from Group 14 tetraalkynes and their reactions with acid

A series of tetrakis(trimethylsilylethyne) derivatives of Group 14 metals (2–4) was prepared. Co₂(CO)₆ complexes 5–10 were synthesised by the reaction of 2–4 with Co₂(CO)₈. From the silyl and germyl based compounds 2 and 3, either one or two alkynes could be complexed with Co₂(CO)₆. In contrast, the tin derived compound 4 could accommodate up to four Co₂(CO)₆ complexes. The longest wavelength UV-Vis absorbances of the silicon and germanium-based complexes were consistent with multiple, non-conjugated Co₂(CO)₆ chromophores. The tetrakis Co₂(CO)₆ complex 10, however, absorbs at a much longer wavelength suggesting conjugation of Co₂(CO)₆ complexes through the tin. The reactivity towards protonolysis of the uncomplexed alkynes 2–4 is a consequence of the hyperconjugative stabilisation of the intermediate β-vinyl cation (the β-effect): Sn(CCSiMe₃)₃>SnOTf(CCSiMe₃)₂>SiMe₃>Ge(CCSiMe₃)₃. The reactivity of the Co₂(CO)₆ complexes, however, was quite different from the reactions of 2–4 and from analogous all-carbon systems. Treatment of 5–10 with strong acid led neither to protiodemetallation of the complexed or non-complexed alkynes but to decomplexation of the cobalt. Similarly, ligand metathesis reactions between 10 and Ph₂SiCl₂ were not observed. The normal reactivity of silylalkynes towards electrophiles, which was expected to be enhanced by the presence of the cobalt complex, was diminished by the particular steric environment of the molecules under examination (5–10). As a result, the favoured reaction under these conditions was decomplexation of the cobalt.     

Ligand connected metal clusters. The molecular structures and solid state packing of {Ru3(CO)11}2(bis(diphenylphosphino)ethane) and {Ru3(CO)11}2(1,4-bis(diphenylphosphino)benzene)

The preparation and structural characterization of {Ru₃(CO)₁₁}₂(1,4-bis(diphenylphosphino)benzene), a modified synthesis of 1,4-bis(diphenylphosphino)benzene, and the structural characterization of {Ru₃(CO)₁₁}₂(bis(diphenylphosphino)ethane) are reported. In both compounds two metal cluster units are connected through ditertiary-phosphine ligands. Both molecules consist of centrosymmetric units in which the diphosphine ligands are largely covered by the triangular ruthenium clusters. No direct interaction between the two cluster units occurs within individual molecules. Molecular packing in the solid state is dominated by interactions between sets of carbon monoxide ligands in motifs that were previously identified in the solid state structure of the parent cluster, Ru₃(CO)₁₂.     

Synthesis of 5,6-dihydro-4H-1,3-oxazines from neutral and cationic platinum(II) nitrile complexes. X-ray structure of trans-[Pt(CF3){ H2CH2}(PPh3)2]BF4

The 1,3-oxazine complexes cis- and trans-[PtCl₂{ C(R)OCH₂CH₂C}H₂₂] (cis: R=CH₃ (1a), CH₂CH₃ (2a), (CH3)₃C (3a), C₆H₅ (4a); trans:R =CH₃ (1b), C₆H₅ (4b)) were obtained in 51-71% yield by reaction in THF at 0 °C of the corresponding nitrile complexes cis- and trans-[PtCl2(NCR)₂] with 2 equiv. of ⁻OCH₂CH₂CH₂Cl, generated by deprotonation of 3-chloro-1-propanol with n-BuLi. The cationic nitrile complexes trans-[Pt(CF₃)(NCR)(PPh₃)₂]BF₄ (R=CH3, C₆H₅) react with 1 equiv, of ⁻ OCH2CH2CH2Cl to give a mixture of products, including the corresponding oxazine derivatives trans-[Pt(CF₃){ CH₂}(PPh₃)₂]BF₄ (5 and 6), the chloro complex _trans- [Pt(CF₃)Cl(PPh₃)₂] and free oxazine H2. For short reaction times (c. 5–15 min) the oxazine complexes 5 and 6 could be isolated in modest yield (37–49%) from the reaction mixtures and they could be separated from the corresponding chloro complex (yield 40%) by taking advantage of the higher solubility of the latter derivative in benzene. For longer reaction times (> 2 h), trans-[Pt(CF₃)Cl(PPh₃)₂] was the only isolated product. Complex 6 was crystallographically characterized and it was found to contain also crystals of trans- [PtCl{ H₂}(PPh₃)₂]BF₄, which prevented a more detailed analysis of the bond lengths and angles within the metal coordination sphere. The 1,3-oxazine ring, which shows an overall planar arrangement, is characterized by high thermal values of the carbon atoms of the methylene groups indicative of disordering in this part of the molecule in agreement with fast dynamic ring processes suggested on the basis of ¹H NMR spectra. It crystallizes in the trigonal space group P , with a=22.590(4), b=15.970(3) Å, γ=120°, V=7058(1) ų and Z=6. The structure was refined to R=0.059 for 3903 unique observed (I3σ(I)) reflections. A mechanism is proposed for the conversion of nitrile ligands to oxazines in Pt(II) complexes.     

Carbonylmolybdenum complexes with di(imino)pyridine and related ligands: Reduction of a di(imino)pyridine to an aminoiminopyridine system under mild conditions

The reactions of [Mo(CO)₆] towards a 2,6-di(imino)pyridine L¹ and related ligands were studied. The reaction with L¹ afforded two new complexes, [Mo(CO)₄L¹] (1) and [Mo(CO)₄L²] (2), where L² is the 2-amino-6-iminopyridine ligand arising from the hydrogenation of one imine function of L¹; similar reaction with a 2-acetyl-6-iminopyridine ligand L³ afforded [Mo(CO)₄L³] (3). Compounds 1, 2 and 3 have been fully characterised by IR, ¹H NMR and X-ray crystallography; they present a metal ion in a pseudo-octahedral environment, the three organic ligands acting with bidentate N₂ coordination modes. One of the imine functions in 1, the amine function in 2, and the ketone function in 3 are uncoordinated.     

Synthesis, structure and electronic spectra of new three-coordinated copper(I) complexes with tricyclohexylphosphine and diimine ligands

Three new copper(I) complexes with tricyclohexylphosphine (PCy₃) and different diimine ligands, [Cu(phen)(PCy₃)]BF₄ (1) (phen = 1,10′-phennanthroline), [Cu(bpy)(PCy₃)₂]BF₄ (2) (bpy = 2,2′-bipyridine) and [Cu(MeO-CNN)(PCy₃)]BF₄ (3) (MeO-CNN = 6-(4-methoxyl)phenyl-2,2′-bipyridine), have been synthesized and characterized. X-ray structure reveals that complexes 1 and 3 are three-coordinated with trigonal geometry, while complex 2 adopts distorted tetrahedron geometry. Complexes 1 and 3 exhibit ligand redistribution reactions in chloromethane solution by addition of excess amount of PCy₃, in which three-coordinated 1 changes into four-coordinated [Cu(phen)(PCy₃)₂]⁺, and 3 leads to form [Cu(PCy₃)₂]BF₄ and CNN-OMe. All the three complexes display yellow ³MLCT emissions in solid state at room temperature with λ_max at 558, 564 and 582 nm for 1, 2 and 3, respectively, and red-shift to 605, 628 and 643 nm at 77 K in dichloromethane solution.     

Reactions of the haloalcohols HO(CH2)nCl (n = 2, 3) with platinum(II) - alkynyl and -alkyne complexes. X-ray crystal structure of trans-[Pt(Me) {C(OCH2CH2Cl) (CH2Ph)} (PPh3)2] [BF4]

The chloro complexes trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄, react with 1-alkynes HC---C---R in the presence of NEt₃ to afford the corresponding acetylide derivatives trans-[Pt(Me) (C---C---R) (PPh₃)₂] (R = p-tolyl (1), Ph (2), C(CH₃)₃ (3)). These complexes, with the exception of the t-butylacetylide complex, react with the chloroalcohols HO(CH₂)_nCl (n = 2, 3) in the presence of 1 equiv. of HBF₄ to afford the alkyl(chloroalkoxy)carbene complexes trans-[Pt(Me) {C[O(CH₂)_nCl](CH₂R) } (PPh₃)₂][BF₄] (R = p-tolyl, N = 2 (4), N = 3 (5); R=Ph, N = 2 (6)). A similar reaction of the bis(acetylide) complex trans-[Pt(C---C---Ph)₂(PMe₂Ph)₂] with 2 equiv. HBF₄ and 3-chloro-1-propanol affords trans-[Pt(C---CPh) {C(OCH₂CH₂CH₂Cl)(CH₂Ph) } (PMe₂Ph)₂][BF₄] (7). T alkyl(chloroalkoxy)-carbene complex trans-[Pt(Me) {C(OCH₂CH₂Cl)(CH₂Ph) } (PPh₃)₂][BF₄] (8) is formed by reaction of trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄ in HOCH₂CH₂Cl, with phenylacetylene in the presence of 1 equiv. of n-BuLi. The reaction of the dimer [Pt(Cl)(μ-Cl)(PMe₂Ph)]₂ with p-tolylacetylene and 3-chloro-1-propanol yields cis-[PtCl₂{C(OCH₂CH₂CH₂Cl)(CH₂C₆H₄-p-Me}(PMe₂Ph)] (9). The X-ray molecular structure of (8) has been determined. It crystallizes in the orthorhombic system, space group Pna2₁, with a = 11.785(2), B = 29.418(4), C = 15.409(3) Å, V = 4889(1) ų and Z = 4. The carbene ligand is perpendicular to the Pt(II) coordination plane; the PtC(carbene) bond distance is 2.01(1) Å and the short C(carbene)-O bond distance of 1.30(1) Å suggests extensive electronic delocalization within the Pt---C(carbene)---O moietry.     

Synthesis and characterisation of palladium(II) and platinum(II) compounds containing pyrazole-derived ligands: crystal structure of [PdCl2(HL)] (HL = 3-phenyl-5-(2-pyridyl)pyrazole)

Reaction of the ligands 3-phenyl-5-(2-pyridyl)pyrazole (HL¹), 3,5-bis(2-pyridyl)pyrazole (HL²), 3-methyl-5-(2-pyridyl)pyrazole (HL³) and 3-methyl-5-phenylpyrazole (HL⁴) with [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) or [PdCl₂(cod)] gives complexes with stoichiometry [PdCl₂(HL)₂] (HL = HL¹, HL², HL³), [Pt(L)₂] (L = L¹, L², L³) and [MCl₂(HL⁴)₂] (M = Pd(II), Pt(II)). The new complexes were characterised by elemental analyses, conductivity measurements, infrared and ¹H NMR spectroscopies. The crystal and molecular structure of [PdCl₂(HL¹)] was resolved by X-ray diffraction, and consists of monomeric cis-[PdCl₂(HL¹)] molecules. The palladium centre has a typical square planar geometry, with a slight tetrahedral distortion. The tetra-coordinated metal atom is bonded to one pyridine nitrogen, one pyrazolic nitrogen and two chloro ligands in a cis disposition. The ligand HL¹ is not completely planar.     

The propensity of alkoxide and aryloxide derivatives of tungsten carbonyls to aggregate in solution. Synthesis and X-ray structures of dinuclear, trinuclear and tetranuclear complexes derived from the MeOW(CO)5 anion

The complex [Et₄N][W(CO)₅OMe] (1) has been prepared from the reaction of the photochemically generated W(CO)₅THF adduct and [Et₄N][OH] in methanol. Complex 1 was shown to undergo rapid CO dissociation in THF to quantitatively provide the dimeric dianion, [W(CO)₄OMe]₂²⁻. The resulting THF insoluble salt [Et₄N]₂[W(CO)₄OMe]₂ (2) has been structurally characterized by X-ray crystallography, with the doubly bridging methoxide ligands being in an anti configuration. Complex 2 was found to subsequently react with excess methoxide ligand in a THF slurry to afford the face-sharing octahedron complex [Et₄N]₃[W₂(CO)₆(OMe)₃] (3) which contains three doubly bridging methoxide groups. In the absence of excess methoxide ligand complex 2 cleanly yields the tetrameric complex [Et₄N]₄[W(CO)₃OMe]₄ (4) which has been structurally characterized as a cubane-like arrangement with triply bridging μ³-methoxide groups and W(CO)₃ units. Although complex 3 was not characterized in the solid state, the closely related glycolate derivative [Et₄N]₃[W₂(CO)₆(OCH₂CH₂OH)₃] (5) was synthesized and its structure determined by X-ray crystallography. The trianions of complex 5 are linked in the crystal lattice by strong intermolecular hydrogen bonds. Crystal data for 2: space group P2₁/n, a = 7.696(2), b = 22.019(4), c = 9.714(2) Å, β = 92.22(3)°, Z = 4, R = 6.43%. Crystal data for 4: space group Fddd, a = 12.433(9), b = 24.01(2), c = 39.29(3) Å, Z = 8, R = 8.13%. Crystal data for 5: space group P2₁2₁2₁, a = 11.43(2), b = 12.91(1), c = 29.85(6) Å, Z = 8, R = 8.29%. Finally, the rate of CO ligand dissociation in the closely related aryloxide derivatives [Et₄N][W(CO)₅OR] (R = C₆H₅ and 3,5-F₂C₆H₃) were measured to be 2.15 × 10⁻² and 1.31 × 10⁻³ s⁻¹, respectively, in THF solution at 5°C. Hence, the value of the rate constant of 2.15 × 10⁻² s⁻¹ establishes a lower limit for the first-order rate constant for CO loss in the W(CO)₅OMe⁻ anion, since the methoxide ligand is a better π-donating group than phenoxide.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

CO substitution and diphosphine ligand chelation in the reaction between 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and Re(2(CO)8(μ-H)(μ-η,η-C CPh)

The reaction between the redox-active diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and the dirhenium compound Re₂(CO)₈(μ-H)(μ-η¹,η²-C CPh) in CH₂Cl₂ at room temperature proceeds by CO loss to give the dirhenium complex Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) (1). This new complex was characterized in solution by IR and NMR (¹H and ³¹P) spectroscopy and in the solid state by X-ray diffraction analysis. Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) crystallizes in the triclinic space group

Full-size image

γ = 69.240(6)°, V = 2024.9(3) ų, Z = 2, d_calc = 1.862 g cm⁻³ R = 0.0221, R_w = 0.243 for 4066 observed reflections. The bpcd ligand in 1 adopts a chelating mode with a linear phenylacetylide ligand being located on the adjacent rhenium center cis to the bpcd ligand. This complex represents the first structurally characterized example of a hydrido-bridged dirhenium complex possessing both a linear acetylide ligand and a chelating diphosphine ligand.     

The new enneanuclear nickel carbonyl anion [Ni9(CO)16] and its relationships with the [Ni12(CO)21] and [Ni6Rh3(CO)17] clusters

The reaction of [N(PPh₃)₂]₂[Ni₆(CO)₁₂] with Cu(PPh₃)_xCl (x=1, 2), as well as the degradation of [N(PPh₃)₂]₂[H₂Ni₁₂(CO)₂₁] with PPh₃, affords the new and unstable dark orange–brown [N(PPh₃)₂]₂[Ni₉(CO)₁₆].THF salt in low yields. This salt has been characterized by a CCD X-ray diffraction determination, along with IR spectroscopy and elemental analysis. The close-packed two-layer metal core geometry of the [Ni₉(CO)₁₆]²⁻ dianion is directly related to that of the bimetallic [Ni₆Rh₃(CO)₁₇]³⁻ trianion and may be envisioned to be formally derived from the hcp three-layer geometry of [Ni₁₂(CO)₂₁]⁴⁻ by the substitution of one of the two outer [Ni₃(CO)₃(μ−CO)₃]²⁻ layers with a face-bridging carbonyl group.     

1,3-Dipolar cycloaddition to the FeSC fragment 20. Preparation and properties of carbonyliron complexes of di-thiooxamide. Reactivity of the mononuclear (di-thiooxamide)Fe(CO)3 towards dimethyl acetylenedicarboxylate

Reaction of Fe₂(CO)₉ at room temperature in THF with the di-thiooxamides (L), SC{N(R,R′)}C{(R,R′)N}S [R=Me, R′-R′=(CH₂)₂ (a); R=H, R′=ⁱPr (b); R=H, R′=iPr (c), R=H, R′=benzyl (d); R=H, R′=H (e)], results for ligands a-d initially in the formation of the mononuclear σ-S, σ-S′ chelate complexes Fe(CO)₃(L) (7a-d), which could be isolated in case of 7a and 7d. Under the reaction conditions, complexes 7a-d react further with [Fe(CO)₄] fragments to give three types of Fe₂(CO)₆(L) complexes (8a-d) in high yields, depending on the di-thiooxamide ligand used together with traces of the known complex S₂Fe₃(CO)₉ (14). The molecular structures of these complexes have been established by the single crystal X-ray diffraction determinations of 8a, 8b and 8d. In the reaction with ligand e the corresponding complex 7e was not detected and the well-known complexes 14 and S₂Fe₃(CO)₉ (15) were isolated in low yield. In situ prepared 7a reacts in a slow reaction with 1 equiv. of dimethyl acetylene dicarboxylate in a 1,3-dipolar cycloaddition reaction to give the stable initial ferra [2.2.1] bicyclic complex 10a in 60% yield. In complex 10a an additional Fe(CO)₄ fragment is coordinated to the sulfido sulfur atom of the cycloadded FeSC fragment. When a toluene solution of 10a is heated to 50 °C it loses two terminal CO ligands to give the binuclear FeFe bonded complex 11a in almost quantitative yield. The molecular structures of 10a and 11a have been confirmed by single crystal X-ray diffraction. Reaction of 7d at room temperature with 2 equiv. of dimethyl acetylene dicarboxylate results in the mononuclear complex 12d in 5% yield. The molecular structure of 12b has been established by single crystal X-ray diffraction and comprises a tetra dentate ligand with two ferra-sulpha cyclobutene, and a ferra-disulpha cyclopentene moiety. When the reaction is performed at 60 °C a low yield of 2,3,4,5-thiophene tetramethyl tertracarboxylate is obtained besides complex 12d.     

Synthesis, structural and spectroscopic characterization of mono- and binuclear copper(I) complexes with substituted diimine and phosphine ligands

The reaction of [Cu(CH₃CN)₄]BF₄, 6-(4-methoxyl)phenyl-2,2′-bipyridine (designated as MeO-CNN), and/or tricyclohexylphosphine (PCy₃) and diimine ligands derived from 4,4′-bipyridine gave four mono- and binuclear copper(I) complexes, [Cu(MeO-CNN)₂]BF₄ (1), [Cu₂(MeO-CNN)₂(PCy₃)₂(4,4′-bipy)](BF₄)₂ · 1.5CH₂Cl₂ (2) (bipy = bipyridine), [Cu₂(MeO-CNN)₂(PCy₃)₂(bpete)](BF₄)₂ · 4CH₂Cl₂ (3) (bpete = trans-1,2-bis(4-pyridyl)ethene) and [Cu₂(MeO-CNN)₂(PCy₃)₂(4,4′-azpy)] (BF₄)₂ · 1.5CH₂Cl₂ (4) (azpy = azobispyridine). Crystallographic studies of complexes 1-4 show that each copper(I) center adopts a pseudo-tetrahedral coordination geometry. Complexes 2-4 consists of -Cu(MeO-CNN)(PCy₃) units which are linked through 4,4′-bipy, bpete and 4,4′-azpy, respectively. The UV-Vis spectra of these four complexes all exhibit intense high-energy absorptions at λ_max < 340 nm and broad visible bands in a range of 430-550 nm, ascribed to intraligand (IL π → π^∗) transitions and metal-to-ligand charge-transfer (MLCT) transitions, respectively. The density functional theory calculation was used to interpret the absorption spectrum of 1, which further supports the assignment of MLCT character. The binuclear complexes 2 and 3 both display red solid-state emissions centred at 620 and 660 nm from metal-to-ligand charge-transfer excited state, respectively. Interestingly, the electron paramagnetic resonance (EPR) spectral measurements confirm copper(I) complexes oxidized to corresponding copper(II)-halide product upon excitation at 355 nm in dichloromethane solution.     

Chemistry in environmentally benign media Part 1. Synthesis and characterization of 1,2-bis[bis(hydroxymethyl)phosphino]ethane (‘HMPE’). X-ray structure of [Pt{(HOH2C)2PCH2CH2P(CH2OH)2}2](Cl)2

The water-soluble bisphosphine, 1,2-bis(bis(hydroxymethyl)phosphino)ethane (1), was synthesized in near quantitative yield by the reaction of bisphosphine, H₂PCH₂CH₂PH₂, with an aqueous formaldehyde in the presence of K₂PtCl₄. The reaction of this water-soluble bisphosphine 1 with cis-Pt(COD)Cl₂ affords the mononuclear bischelate complex, [Pt{(HOH₂C)₂PCH₂CH₂P(CH₂OH)₂}₂](Cl)₂ (2), in near quantitative yield. The new ligand and complex have been characterized spectroscopically and the structure of the metal complex, 2, was determined by X-ray crystallography. The Pt(II) complex 2 crystallizes in the orthorhombic space group Pbca(a=14.623(1), B=16.216(2), C=9.319(4) Å) with Z=4. The final R value is 0.024.     

Reactions between ruthenium cluster carbonyls and 1,4-diphenylbuta-1,3-diyne

The complexes RuC(CCPh)=CPhC(CCPh)=CPh(CO)₃(NMe₃) (3), Ru₂μ-C(CCPh)=CPhC(CCPh)=CPh(CO)₆ (1), Ru₂μ-[C(CCPh)=CPh]₂CO(CO)₆ (2), Ru₃(μ₃-PhC₂CCPh)(μ-CO)(CO)₉ (4) and Ru₄(μ₄-PhC₂CCPh)(CO)₁₂ (5) have been isolated from reactions between PhC₂C₂Ph and Ru₃(CO)₁₂ or RU₃(CO)₁₀(NCMe)₂. The molecular structures of complexes 1, 2, 3 and 5 have been determined from single-crystal X-ray studies. All complexes have precedents in similar products obtained from reactions involving mono-ynes; in the present cases, each alkyne fragment retains a phenylethynyl (PhCC---) group as a non-coordinated substituent.     

Synthesis, platinum(II) complexes and structural aspects of the new tetradentate phosphine cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphino)cyclobutane

Several novel dimers of the composition [M₂Cl₄(trans-dppen)₂] (M=Ni (1), Pd (2), Pt (3)) containing trans-1,2-bis(diphenylphosphino)ethene (trans-dppen) have been prepared and characterized by X-ray diffraction methods, NMR spectroscopy (¹⁹⁵Pt{¹H}, ³¹P{¹H}), elemental analyses, and melting points. The intramolecular [2+2] photocycloaddition of the two diphosphine-bridges in 3 produces [Pt₂Cl₄(dppcb)] (4), where dppcb is the new tetradentate phosphine cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphino)cyclobutane. Neither 1 nor the free diphosphine trans-dppen shows this reaction. In the case of 2 the photocycloaddition is slower than in 3. This difference can be explained by the shorter distance between the two aliphatic double bonds in 3 than in 2, but also different transition probabilities within ground and excited states of the used metals could be involved. Furthermore, variable-temperature ³¹P{¹H} NMR spectroscopy of 2 or 3 reveals a negative activation entropy of 2 for the [2+2] photocycloaddition, but a positive of 3. The removal of chloride from 4 by precipitating AgCl with AgBF₄, and subsequent treatment with 2,2′-bipyridine (bipy) or 1,10-phenanthroline (phen) leads to [Pt₂(dppcb)(bipy)₂](BF₄)₄ (5) and [Pt₂(dppcb)(phen)₂](BF₄)₄ (6), respectively. In an analogous reaction of 4 with PMe₂Ph or PMePh₂, [Pt₂(dppcb)(PMe₂Ph)₄](BF₄)₄ (7) and [Pt₂(dppcb)(PMePh₂)₄](BF₄)₄ (8) are formed. Complexes 1–8 show square–planar coordinations, where the compounds 4–8 have also been characterized by the above mentioned methods together with fast atom bombardment mass spectrometry (7, 8). The crystal structure of 4 reveals two conformations, which arise from an energetic competition between the sterical demands of dppcb and an ideal square–planar environment of Pt(II). The free tetraphosphine dppcb can be obtained easily from 4 by treatment with NaCN. It has been characterized fully by the above methods including ¹³C{¹H} and ¹H NMR spectroscopy. The X-ray structure analysis shows the pure MMMP-enantiomer in the solid crystal, which is therefore optically active. This chirality is induced by a conformation of dppcb, where all four PPh₂ groups are non-equivalent. Variable-temperature ³¹P{¹H} NMR spectroscopy of dppcb confirms this explanation, since the single signal at room temperature is split into two doublets at 183 K. The goal of this article is to demonstrate the facile production of a new tetradentate phosphine from a diphosphine precursor via Pt(II) used as a template.