Purification and characterization of alkaline soda-bleach stable protease from Bacillus sp. APP-07 isolated from Laundromat soil

The detergent-compatible alkaline protease was produced from the bacterial strain Bacillus sp. APP-07 isolated from Laundromat soil of Solapur, Maharashtra, India. The culture was grown in 1000?ml capacity baffled flask with a working volume of 100?ml and incubated at 55?°C for 33?h on a rotary shaker. After incubation, alkaline protease was partially purified by the sequential method of acetone precipitation followed by nominal molecular weight limit (NMWL) cut-off ultrafiltration using 50?K and 10?K filters. Finally, Sephadex G-100 gel filtration chromatographic purification was performed to obtain 3.12 fold purified alkaline protease enzyme with a 66.67% final yield. The purified enzyme showed 31907.269 units (U) of enzyme activity containing 8741.718?U/mg of specific enzyme activity. The molecular weight of the enzyme was confirmed about 33.0?kDa (kDa) by the SDS-PAGE analysis. The purified enzyme was stable at higher pH and temperature range, with an optimum pH 10.5 and temperature 55?°C. The enzyme showed excellent stability and compatibility in various detergents, surfactants, bleach, and oxidizing agents. The enzyme activity enhanced in the presence of Ca²⁺, Cu²⁺, and surfactants, whereas; the phenylmethylsulphonyl fluoride (PMSF) and Diisopropyl fluorophosphate (DFP) completely inhibit the enzymatic activity, which pointed out that the enzyme affiliated to serine-centered metalloproteases family.In conclusion, the remarkable tolerance and stability of the enzyme explored the promising candidature for the several potential applications in the laundry detergents. The sustainability of the enzyme might serve several possible applications in the laundry detergents, leather industries, and other harsh industrial processes.     

Purification and characterization of a solvent and detergent-stable novel protease from Bacillus cereus

A protease-producing bacterium was isolated from slaughterhouse waste samples, Hyderabad, India. It was related to Bacillus cereus on the basis of 16S rRNA gene sequencing and biochemical properties. The protease was purified to homogeneity using ammonium sulfate precipitation, and ion exchange chromatography with a fold purification of 1.8 and a recovery of 49%. The enzyme had a relative molecular weight of 28 kDa, pH and temperature optima for this protease were 10 and 60 °C. The activity was stable between a pH range of 7.0 and 12.0. The activity was inhibited by EDTA and enhanced (four-fold) by Cu²⁺ ions indicating the presence of metalloprotease. The enzyme showed extreme stability and activity even in the presence of detergents and anionic surfactants. The enzyme also showed stability in the presence of organic solvents.     

Laundry detergent compatibility of the alkaline protease from Bacillus cereus

The endogenous protease activity in various commercially available laundry detergents of international companies was studied. The maximum protease activity was found at 50 degrees C in pH range 10.5-11.0 in all the tested laundry detergents. The endogenous protease activity in the tested detergents retained up to 70% on incubation at 40 degrees C for 1 h, whereas less than 30% activity was only found on incubation at 50 degrees C for 1 h. The alkaline protease from an alkalophilic strain of Bacillus cereus was studied for its compatibility in commercial detergents. The cell free fermented broth from shake flask culture of the organism showed maximum activity at pH 10.5 and 50 degrees C. The protease from B. cereus showed much higher residual activity (more than 80%) on incubation with laundry detergents at 50 degrees C for 1 h or longer. The protease enzyme from B. cereus was found to be superior over the endogenous proteases present in the tested commercial laundry detergents in comparison to the enzyme stability during the washing at higher temperature, e.g., 40-50 degrees C.     

Purification and characterization of a serine alkaline protease from Bacillus clausii GMBAE 42

An extracellular serine alkaline protease of Bacillus clausii GMBAE 42 was produced in protein-rich medium in shake-flask cultures for 3 days at pH 10.5 and 37°C. Highest alkaline protease activity was observed in the late stationary phase of cell cultivation. The enzyme was purified 16-fold from culture filtrate by DEAE-cellulose chromatography followed by (NH₄)₂SO₄ precipitation, with a yield of 58%. SDS-PAGE analysis revealed the molecular weight of the enzyme to be 26.50 kDa. The optimum temperature for enzyme activity was 60°C; however, it is shifted to 70°C after addition of 5 mM Ca²⁺ ions. The enzyme was stable between 30 and 40°C for 2 h at pH 10.5; only 14% activity loss was observed at 50°C. The optimal pH of the enzyme was 11.3. The enzyme was also stable in the pH 9.0–12.2 range for 24 h at 30°C; however, activity losses of 38% and 76% were observed at pH values of 12.7 and 13.0, respectively. The activation energy of Hammarsten casein hydrolysis by the purified enzyme was 10.59 kcal mol⁻¹ (44.30 kJ mol⁻¹). The enzyme was stable in the presence of the 1% (w/v) Tween-20, Tween-40,Tween-60, Tween-80, and 0.2% (w/v) SDS for 1 h at 30°C and pH 10.5. Only 10% activity loss was observed with 1% sodium perborate under the same conditions. The enzyme was not inhibited by iodoacetate, ethylacetimidate, phenylglyoxal, iodoacetimidate, n-ethylmaleimidate, n-bromosuccinimide, diethylpyrocarbonate or n-ethyl-5-phenyl-iso-xazolium-3′-sulfonate. Its complete inhibition by phenylmethanesulfonylfluoride and relatively high k _cat value for N-Suc-Ala-Ala-Pro-Phe-pNA hydrolysis indicates that the enzyme is a chymotrypsin-like serine protease. K _m and k _cat values were estimated at 0.655 μM N-Suc-Ala-Ala-Pro-Phe-pNA and 4.21×10³ min⁻¹, respectively.     

Detergent-compatible,organic solvent-tolerant alkaline protease from Bacillus circulans MTCC 7942: Purification and characterization

Proteases are now recognized as the most indispensable industrial biocatalyst owing to their diverse microbial sources and innovative applications. In the present investigation, a thermostable, organic solvent-tolerant, alkaline serine protease from Bacillus circulans MTCC 7942, was purified and characterized. The protease was purified to 37-fold by a three-step purification scheme with 39% recovery. The optimum pH and temperature for protease was 10 and 60°C, respectively. The apparent molecular mass of the purified enzyme was 43 kD as revealed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The K_m and V_max values using casein-substrate were 3.1 mg/mL and 1.8 µmol/min, respectively. The protease remained stable in the presence of organic solvents with higher (>3.2) log P value (cyclohexane, n-octane, n-hexadecane, n-decane, and n-dodecane), as compared to organic solvents with lower (<3.2) log P value (acetone, butanol, benzene, chloroform, toluene). Remarkably, the protease showed profound stability even in the presence of organic solvents with less log P values (glycerol, dimethyl sulfate [DMSO], p-xylene), indicating the possibility of nonaqueous enzymatic applications. Also, protease activity was improved in the presence of metal ions (Ca²⁺, Mg²⁺, Mn²⁺); enhanced by biosurfactants; hardly affected by bleaching agents, oxidizing agents, and chemical surfactants; and stable in commercial detergents. In addition, a protease–detergent formulation effectively washed out egg and blood stains as compared to detergent alone. The protease was suitable for various commercial applications like processing of gelatinous film and as a compatible additive to detergent formulation with its operative utility in hard water.     

短小芽孢杆菌2080碱性蛋白酶的纯化与性质

短小芽孢杆菌（Bacillus pumilus）2080碱性蛋白酶的发酵液经超滤、硫酸铵沉淀、CM Sepharose Fast Flow和DEAE Sepharose Fast Flow离子交换层析得到了纯化的组分。SDS-PAGE电泳分析显示其分子量约为61kDa。酶学性质研究表明,该纯化酶的最适pH为10．5,最适温度为50℃。     

Purification and molecular characterization of subtilisin-like alkaline protease BPP-A from Bacillus pumilus strain MS-1

AIMS: The present study was conducted by screening zein-degrading bacteria in an attempt to obtain zein-degrading protease. METHODS AND RESULTS: Soil bacteria were screened by formation of a clear zone on zein plates. Characterization of a zein-degrading bacterium indicated a taxonomic affiliation to Bacillus pumilus, and was named MS-1 strain. The strain produced two different types of extracellular proteases, BPP-A and BPP-B. In this study, we purified and characterized BPP-A because it exhibited a higher ability to hydrolyze zein than BPP-B. When casein was used as the substrate, the optimal pH for BPP-A was 11.0. In BPP-A, zein was better substrate than casein at pH 13.0, whereas casein was better one than zein at pH 11.0. The bppA gene encoded a 383-amino acid pre-pro form of BPP-A, and mature BPP-A contained 275 amino acid residues. It was concluded that BPP-A belonged to the subtilisin family. CONCLUSION: A zein-degrading bacterium assigned to B. pumilus produced two different types of extracellular proteases, BPP-A and BPP-B. BPP-A exhibited an ability to hydrolyze zein in an extreme alkaline condition. SIGNIFICANCE AND IMPACT OF THE STUDY: This is a first report on screening for zein-degrading micro-organisms. The subtilisin-like protease BPP-A is possible to utilize as an industrial enzyme for the production of zein hydrolysates.     

Purification and stability characteristics of an alkaline serine protease from a newly isolated Haloalkaliphilic bacterium sp. AH-6

An alkaline protease secreting Haloalkaliphilic bacterium (Gene bank accession number EU118361) was isolated from the Saurashtra Coast in Western India. The alkaline protease was purified by a single step chromatography on phenyl sepharose 6 FF with 28% yield. The molecular mass was 40 kDa as judged by SDS-PAGE. The enzyme displayed catalysis and stability over pH 8–13, optimally at 9–11. It was stable with 0–4 M NaCl and required 150 mM NaCl for optimum catalysis at 37 °C; however, the salt requirement for optimal catalysis increased with temperature. While crude enzyme was active at 25–80 °C (optimum at 50 °C), the purified enzyme had temperature optimum at 37 °C, which shifted to 80 °C in the presence of 2 M NaCl. The NaCl not only shifted the temperature profile but also enhanced the substrate affinity of the enzyme as reflected by the increase in the catalytic constant (K _cat). The enzyme was also calcium dependent and with 2 mM Ca⁺², the activity reached to maximum at 50 °C. The crude enzyme was highly thermostable (37–90 °C); however, the purified enzyme lost its stability above 50 °C and its half life was enhanced by 30 and sevenfold at 60 °C with 1 M NaCl and 50 mM Ca⁺², respectively. The activity of the enzyme was inhibited by PMSF, indicating its serine type. While the activity was slightly enhanced by Tween-80 (0.2%) and Triton X-100 (0.05%), it marginally decreased with SDS. In addition, the enzyme was highly stable with oxidizing-reducing agents and commercial detergents and was affected by metal ions to varying extent. The study assumes significance due to the enzyme stability under the dual extremities of pH and salt coupled with moderate thermal tolerance. Besides, the facts emerged on the enzyme stability would add to the limited information on this enzyme from Haloalkaliphilic bacteria.     

地衣芽孢杆菌TG116胞外蛋白酶产酶条件与酶学性质

【背景】从独角莲中分离得到的地衣芽孢杆菌TG116是一株对植物病原菌具有广谱抗性作用的生防菌株。【目的】优化TG116的产酶条件并探索其酶学性质,进一步了解其抗菌机制。【方法】采用Folin-Phenol显色法与响应曲面法,优化菌株TG116的产酶条件并研究其蛋白酶的酶学性质。【结果】菌株TG116产酶最适条件为:温度40.83°C,p H 8.01,发酵时间53.74 h,增加通气量可以显著提高酶活力。按照优化后的条件培养48 h后,上清液蛋白酶活力从57.46 U/mL达到了254.07 U/mL。酶学性质研究表明:该酶为碱性蛋白酶,最适反应pH为8.5,最适反应温度为50°C,具有良好的温度和pH稳定性,EDTA对酶活具有强烈的抑制作用,金属离子Mg~(2+)、Ca~(2+)、Na~+、Co~(2+)、K~+等对酶活也具有一定的抑制作用。【结论】菌株TG116具有良好的p H与温度稳定性,在实际应用中蛋白酶不易失活,可以分解真菌的细胞壁蛋白成分,破坏细胞壁结构,从而抑制甚至杀死病原菌,达到抗菌作用。     

地衣芽孢杆菌JF-UN122碱性蛋白酶的分离纯化与性质

地衣芽孢杆菌JF—UN122的发酵液,以硫酸铵分段盐析得粗酶,再经DEAE—Sephadex A—50吸附色素、CM—Sephadex C-50离子交换及Sephadex G—75柱层析等步骤获得电泳纯的碱性蛋白酶。SDS-PAGE测得其分子量为31．6KDa。以酪蛋白为底物时,酶的Km为5．26μg／min,Vm为20．8μg／min。酶的最适pH为9．0,最适温度为55℃,pH5～11,55℃以下酶较稳定,对1mol／LH2O2具有一定的耐氧化性。PMSF对酶抑制,二硫苏糖醇(DTT)有保护作用,钙离子、EDTA、SDS、尿素等对酶无明显影响。     

Purification and characterization of extracellular alkaline serine protease from Stenotrophomonas maltophilia strain S-1

AIMS: The present study was conducted by screening soil bacteria in an attempt to isolate a bacterium that produced extracellular alkaline protease, and for purification and characterization of the protease. METHODS AND RESULTS: Soil bacteria were screened by growth on casein as the sole carbon source. Characterization of a strain isolated from soil of Abashiri, Japan indicated a taxonomic affiliation to Stenotrophomonas maltophilia, and was named S-1 strain. The purified S-1 protease, designed S. maltophilia Protease-1 (SmP-1), exhibited an optimal pH of 12.0, optimal reaction temperature of 50 degrees C and a molecular mass of approximately 40 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The cleavage sites of the oxidized-insulin B chain by SmP-1 were identified as Leu6-Cys7, Cys7-Gly8, Tyr16-Leu17 and Leu17-Val18. The N-terminal amino acid sequence of the purified alkaline protease was determined as NH2-SASAPMVSGVAALVLE. CONCLUSION: A novel extracellular alkaline serine protease was isolated from S. maltophilia strain S-1. The optimal pH of the proteolytic activity was pH 12.0. SIGNIFICANCE AND IMPACT OF THE STUDY: The extremely high optimal pH and heat stability of the alkaline serine protease SmP-1 might make it widely applicable to food and other industries.     

地衣芽胞杆菌碱性蛋白酶基因克隆与表达特性

目的建立高产量和高活力的地衣芽胞杆菌碱性蛋白酶基因表达体系。方法采用PCR技术克隆获得目的基因,将其连入表达质粒pET-32 a构建原核表达重组质粒,经测序鉴定后,转化BL21大肠埃希菌,不同温度下IPTG诱导表达融合蛋白,测定酶活;进一步对该基因和编码蛋白进行同源性比较和酶学性质分析。结果碱性蛋白酶基因序列全长1 149 bp,编码382个氨基酸,同源性为99%,融合蛋白分子质量为62 kD,蛋白酶酶活为29 000 U/mL,并且在25℃时是以可溶蛋白形式表达,37℃时部分蛋白以包涵体形式存在。结论此种表达体系可以成功表达具有生物活性的碱性蛋白酶,诱导温度对蛋白酶存在形式具有较大影响。     

Cost effective characterization process and molecular dynamic simulation of detergent compatible alkaline protease from Bacillus pumilus strain MP27

A psychrothermotolerant alkaline protease isolated from Bacillus pumilus MP27 with a molecular mass ∼53 kDa was isolated from Southern ocean water samples. It was partially purified by single step TPP with purity fold of 16.65. The enzyme was found to be widely stable within a range of temperature and pH, maintaining 52.25% of its activity at 50 °C and 92% at pH 12. The enzyme exhibited an exceptional activity along with tested detergents, showing 98% stability with SDS (10 mg/ml) and ̴ 99% stability with Tide detergent (7 mg/ml). Further, the alkaline protease gene of 1152 bp was successfully cloned in pGEM-T Easy vector in E. coli DH5α. The gene sequence was further translated, modeled and molecular dynamic simulation was performed. The modeled protein was highly unstable during the first 5 ns and therefore could not able to form bonds with the ligand after 1 ns of simulation.     

Purification and partial characterization of a protease associated with photosystem II particles

A protease was extracted with 1 M NaCl from spinach ( Spinacia oleracea L.) photosystem II (PSII) particles and purified through gel filtration and anion-exchange chromatography. SDS-polyacrylamide gel electrophoresis of the protease revealed a polypeptide with a molecular mass of 43 kDa. The activity of the purified protease was assayed using a 24 kDa water-soluble protein as substrate, visualized through SDS-PAGE. The protease even remained active in the presence of 0.1 and 0.2 M NaCl, although the degradation pattern changed, which indicated that the protease was different from that reported earlier by another group. The presence of 0.3 M NaCl was shown to be inhibitory. The protease was inhibited by 1,10-phenanthroline and EGTA-NaOH (pH 7.0), indicating that the metal ions are essential for activity and that the enzyme is a metal-protease. FTIR spectroscopy was used to examine the conformationally sensitive amide I' bands of the protease. The protease was observed to undergo spectroscopic changes that reflect the conformational changes that take place when Ca²⁺ is bound, which further confirms that the protease is a metal-protease.     

Purification and characterization of a novel alkaline protease from Bacillus horikoshii

An investigation was conducted on the enhancement of production and purification of an oxidant and SDS-stable alkaline protease (BHAP) secreted by an alkalophilic Bacillus horikoshii, which was screened from the body fluid of a unique Korean polychaeta (Periserrula leucophryna) living in the tidal mud flats of Kwangwha Island in the Korean West Sea. A prominent effect on BHAP production was obtained by adding 2% maltose, 1% sodium citrate, 0.8% NaCl, and 0.6% sodium carbonate to the culturing medium. The optimal medium for BHAP production contained (g/l) SBM, 15; casein, 10; K(2)HPO(4), 2; KH(2)PO(4), 2; maltose, 20; sodium citrate, 10; MgSO(4), 0.06; NaCl, 8; and Na(2)CO(3), 6. A protease yield of approximately 56,000 U/ml was achieved using the optimized medium, which is an increase of approximately 5.5-fold compared with the previous optimization (10,050 U/ml). The BHAP was homogenously purified 34-fold with an overall recovery of 34% and a specific activity of 223,090 U/mg protein using adsorption with Diaion HPA75, hydrophobic interaction chromatography (HIC) on Phenyl-Sepharose, and ion-exchange chromatography on a DEAE- and CMSepharose column. The purified BHAP was determined a homogeneous by SDS-PAGE, with an apparent molecular mass of 28 kDa, and it showed extreme stability towards organic solvents, SDS, and oxidizing agents. The K(m) and k(cat) values were 78.7 μM and 217.4 s(-1) for N-succinyl-Ala- Ala-Pro-Phe-pNA at 37° C and pH 9, respectively. The inhibition profile exhibited by PMSF suggested that the protease from B. horikoshii belongs to the family of serine proteases. The BHAP, which showed high stability against SDS and H(2)O(2), has significance for industrial application, such as additives in detergent and feed industries.     

Biochemical and structural characterization of a detergent-stable serine alkaline protease from seawater haloalkaliphilic bacteria

An extracellular protease from a newly isolated seawater haloalkaliphilic bacterium, haloalkaliphilic bacteria Ve₂-20-9₁ [HM047794], was purified and characterized. The enzyme is a monomer with a 37.2 kDa estimated molecular weight. It catalyzed reactions in the pH range 8–11 and performed optimally at pH 10. While maximal activity occurred at 50 °C, the temperature profile shifted from 50 to 80 °C in 1–3 M NaCl. The enzyme's thermal stability was probed using circular dichroism (CD) spectroscopy with NaCl at 50 and 70 °C. The changes in the enzyme's secondary structure were also analyzed using Fourier transform infrared spectroscopy (FTIR). The N-terminal amino acid sequence GKDGPPGLCGFFGCI exhibited low homology with other bacterial proteases, which highlights the enzyme's novelty. The enzyme was labile in anionic surfactant (1% w/v SDS) but showed stability in non-ionic surfactants (Tween 20, Tween 80 and Triton X-100 all 1% v/v), commercial detergents, and oxidizing and reducing agents. The enzyme's excellent stability in commercial detergents highlights its potential as a detergent additive.     

Purification and characterization of a novel extracellular protease from Bacillus cereus KCTC 3674

Bacillus cereus KCTC 3674 excretes several kinds of extracellular proteases into the growth medium. Two proteases with molecular masses of approximately 36-kDa and 38-kDa, as shown by SDS-PAGE, were purified from the culture broth. The 38-kDa protease was purified from B. cereus cultivated at 37 degrees C, and the 36-kDa protease was obtained from the B. cereus cultivated at 20 degrees C. The 38-kDa protease was identified as an extracellular neutral (metallo-) protease and was further characterized. The 36-kDa protease was shown to be a novel enzyme based on its N-terminal amino acid sequence, its identification as a metallo-enzyme that was strongly inhibited by EDTA and o-phenanthroline, its hemolysis properties, and its optimal pH and temperature for activity of 8.0 and 70 degrees C, respectively.     

Purification and characterization of an alkaline protease from Pseudomonas aeruginosa MN1

An alkaline protease produced by Pseudomonas aeruginosa MN1, isolated from an alkaline tannery waste water, was purified and characterized. The enzyme was purified 25-fold by gel filtration and ion exchange chromatography to a specific activity of 82350 U mg⁻¹. The molecular weight of the enzyme was estimated to be 32000 daltons. The optimum pH and temperature for the proteolytic activity were pH 8.00 and 60°C, respectively. Enzyme activity was inhibited by EDTA suggesting that the preparation contains a metalloprotease. Enzyme activity was strongly inhibited by Zn²⁺, Cu²⁺ and Hg²⁺(5 mM), while Ca²⁺ and Mn²⁺ resulted in partial inhibition. The enzyme is different from other Pseudomonas aeruginosa alkaline proteases in its stability at high temperature; it retained more than 90% and 66% of the initial activity after 15 and 120 min incubation at 60°C. Journal of Industrial Microbiology & Biotechnology (2000) 24, 291–295. Received 09 June 1999/ Accepted in revised form 24 January 2000     

Production and purification of a calcium-dependent protease from Bacillus cereus BG1

The production and purification of a calcium-dependent protease by Bacillus cereus BG1 were studied. The production of the protease was found to depend specifically on the calcium concentration in the culture medium. This suggests that this metal ion is essential for the induction of protease production and/or stabilisation of the enzyme after synthesis. The calcium requirement is highly specific since other metal ions (such as Mg²⁺ and Ba²⁺, which both activate the enzyme) are not able to induce protease production. The most appropriate medium for growth and protease production comprises (g L^–1) starch 5, CaCl₂ 2, yeast extract 2, K₂HPO₄ 0.2 and KH₂PO₄ 0.2. The protease of BG1 strain was purified to homogeneity by ultrafiltration, heat treatment, gel filtration on Sephacryl S-200, ion exchange chromatography on DEAE-cellulose and, finally, a second gel filtration on Sephacryl S-200, with a 39-fold increase in specific activity and 23% recovery. The molecular weight was estimated to be 34 kDa on SDS-PAGE. The optimum temperature and pH of the purified enzyme were determined to be 60°C and 8.0, respectively, in 100 mM Tris-HCl buffer + 2 mM CaCl₂.