Solvent-induced lysozyme gels: effects of system composition and temperature on structural and dynamic characteristics

The gelation process of lysozyme in water/tetramethylurea in the presence of salt was investigated as a function of temperature and system composition by rheology, infrared spectroscopy, and microcalorimetry. Times and temperatures of gelation were determined from the variation of the storage (G') and loss (G') moduli. It was found that gelation times follow exponential decays with both protein and tetramethylurea (TMU) concentrations and with temperature. The activation energy for the overall process shows a linear dependence on TMU mass fraction. A strongly increased beta-sheet content and reduced alpha-helix occur with the increase of TMU concentration in the binary solvent. Also, a linear decrease of lysozyme denaturation temperature and enthalpy on TMU concentration is found for the TMU mass fraction up to 0.5, above which no denaturation signal can be detected.     

Increasing and decreasing protein stability: effects of revertant substitutions on the thermal denaturation of phage lambda repressor

The thermal denaturations of five revertant lambda repressors containing single amino acid substitutions in their N-terminal domains have been studied by differential scanning calorimetry. Two substitutions slightly decrease stability, and the remaining three render the protein more stable than wild type. The Gly48----Asn and Gly48----Ser proteins are 4 degrees C more stable than wild type. These two substitutions replace an alpha helical residue, and in each case a poor helix forming residue, glycine, is replaced by a residue with a higher helical propensity. We also present data showing that one revertant, Tyr22----Phe, has reduced operator DNA binding affinity despite its enhanced stability.     

Disulfide bond effects on protein stability: designed variants of Cucurbita maxima trypsin inhibitor-V

Attempts to increase protein stability by insertion of novel disulfide bonds have not always been successful. According to the two current models, cross-links enhance stability mainly through denatured state effects. We have investigated the effects of removal and addition of disulfide cross-links, protein flexibility in the vicinity of a cross-link, and disulfide loop size on the stability of Cucurbita maxima trypsin inhibitor-V (CMTI-V; 7 kD) by differential scanning calorimetry. CMTI-V offers the advantage of a large, flexible, and solvent-exposed loop not involved in extensive intra-molecular interactions. We have uncovered a negative correlation between retention time in hydrophobic column chromatography, a measure of protein hydrophobicity, and melting temperature (T(m)), an indicator of native state stabilization, for CMTI-V and its variants. In conjunction with the complete set of thermodynamic parameters of denaturation, this has led to the following deductions: (1) In the less stable, disulfide-removed C3S/C48S (Delta Delta G(d)(50 degrees C) = -4 kcal/mole; Delta T(m) = -22 degrees C), the native state is destabilized more than the denatured state; this also applies to the less-stable CMTI-V* (Delta Delta G(d)(50 degrees C) = -3 kcal/mole; Delta T(m) = -11 degrees C), in which the disulfide-containing loop is opened by specific hydrolysis of the Lys(44)-Asp(45) peptide bond; (2) In the less stable, disulfide-inserted E38C/W54C (Delta Delta G(d)(50 degrees C) = -1 kcal/mole; Delta T(m) = +2 degrees C), the denatured state is more stabilized than the native state; and (3) In the more stable, disulfide-engineered V42C/R52C (Delta Delta G(d)(50 degrees C) = +1 kcal/mole; Delta T(m) = +17 degrees C), the native state is more stabilized than the denatured state. These results show that a cross-link stabilizes both native and denatured states, and differential stabilization of the two states causes either loss or gain in protein stability. Removal of hydrogen bonds in the same flexible region of CMTI-V resulted in less destabilization despite larger changes in the enthalpy and entropy of denaturation. The effect of a cross-link on the denatured state of CMTI-V was estimated directly by means of a four-state thermodynamic cycle consisting of native and denatured states of CMTI-V and CMTI-V*. Overall, the results show that an enthalpy-entropy compensation accompanies disulfide bond effects and protein stabilization is profoundly modulated by altered hydrophobicity of both native and denatured states, altered flexibility near the cross-link, and residual structure in the denatured state.     

The effect of water on the glass transition of human hair

The glass transition of human hair and its dependence on water content were determined by means of differential scanning calorimetry (DSC). The relationship between the data is suitably described by the Fox equation, yielding for human hair a glass transition temperature of T(g) = 144 degrees C, which is substantially lower than that for wool (174 degrees C). This effect is attributed to a higher fraction of hydrophobic proteins in the matrix of human hair, which acts as an internal plasticizer. The applicability of the Fox equation for hair as well as for wool implies that water is homogeneously distributed in alpha-keratins, despite their complex morphological, semicrystalline structure. To investigate this aspect, hair was rendered amorphous by thermal denaturation. For the amorphous hair neither the water content nor T(g) were changed compared to the native state. These results provide strong support for the theory of a quasi-homogeneous distribution of water within alpha-keratins.     

Protein adaptation to high hydrostatic pressure: Computational analysis of the structural proteome

Hydrostatic pressure has a vital role in the biological adaptation of the piezophiles, organisms that live under high hydrostatic pressure. However, the mechanisms by which piezophiles are able to adapt their proteins to high hydrostatic pressure is not well understood. One proposed hypothesis is that the volume changes of unfolding (ΔV_Tot) for proteins from piezophiles is distinct from those of nonpiezophilic organisms. Since ΔV_Tot defines pressure dependence of stability, we performed a comprehensive computational analysis of this property for proteins from piezophilic and nonpiezophilic organisms. In addition, we experimentally measured the ΔV_Tot of acylphosphatases and thioredoxins belonging to piezophilic and nonpiezophilic organisms. Based on this analysis we concluded that there is no difference in ΔV_Tot for proteins from piezophilic and nonpiezophilic organisms. Finally, we put forward the hypothesis that increased concentrations of osmolytes can provide a systemic increase in pressure stability of proteins from piezophilic organisms and provide experimental thermodynamic evidence in support of this hypothesis.     

Molecular adaptation strategies to high temperature and thermal denaturation mechanism of the D-trehalose/D-maltose-binding protein from the hyperthermophilic archaeon Thermococcus litoralis

The D-trehalose/D-maltose-binding protein (TMBP), a monomeric protein of 48 kDa, is one component of the trehalose and maltose uptake system. In the hyperthermophilic archaeon T. litoralis this is mediated by a protein-dependent ATP-binding cassette system transporter. The gene coding for a thermostable TMBP from the archaeon T. litoralis has been cloned, and the recombinant protein has been expressed in E. coli. The recombinant TMBP has been purified to homogeneity and characterized. It exhibits the same functional and structural properties as the native one. In fact, it is highly thermostable and binds both trehalose and maltose with high affinity. In this work we used differential scanning calorimetry studies together with a detailed analysis, at the molecular level, of the three-dimensional protein structure to shed light on the basis of the high thermostability exhibited by the recombinant TMBP from the archaeon T. litoralis. The obtained data suggest that the presence of trehalose does not change the overall mechanism of the denaturation of this protein but it selectively modifies the stability of the TMBP structural domains.     

Low thermodynamic but high kinetic stability of an antifreeze protein from Rhagium mordax

The equilibrium heat stability and the kinetic heat tolerance of a recombinant antifreeze protein (AFP) from the beetle Rhagium mordax (RmAFP1) are studied through differential scanning calorimetry and circular dichroism spectroscopy. In contrast to other insect AFPs studied with this respect, the RmAFP1 has only one disulfide bridge. The melting temperature, T_m, of the protein is determined to be 28.5°C (pH 7.4), which is much lower than most of those reported for AFPs or globular proteins in general. Despite its low melting temperature, both biophysical and activity measurements show that the protein almost completely refolds into the native state after repeated exposure of 70°C. RmAFP1 thus appears to be kinetically stable even far above its melting temperature. Thermodynamically, the insect AFPs seem to be dividable in three groups, relating to their content of disulfide bridges and widths of the ice binding motifs; high melting temperature AFPs (high disulfide content, TxT motifs), low melting temperature but high refolding capability AFPs (one disulfide bridge, TxTxTxT motifs) and irreversibly unfolded AFPs at low temperatures (no disulfide bridges, TxTxTxTxT motifs). The property of being able to cope with high temperature exposures may appear peculiar for proteins which strictly have their effect at subzero temperatures. Different aspects of this are discussed.     

Explaining the texture properties of whey protein isolate/starch co-gels from fracture structures

The effects of tapioca starch (TS) and potato starch (PS) on texture properties of whey protein isolate (WPI)/starch co-gels were investigated for fracture structures. We focused on two types of WPI network structures. In a fine-stranded structure at pH 6.8, the WPI/TS co-gel fractured similarly to the WPI single gel. The WPI/PS co-gel was broken at a lower strain and lower stress. In a random aggregation at pH 5.8, the WPI/TS co-gel reached a yielding point at a lower strain, whereas the WPI/PS co-gel fractured at a higher strain and higher stress. In the fracture structures, it was revealed that breaks occurred in different places in these cases, which could explain the different texture properties of samples. This study tries to explain the texture properties of WPI/starch co-gels from fracture structures and provides a reference to predict texture properties of the WPI/starch food system.     

Role of the IXI/V motif in oligomer assembly and function of StHsp14.0, a small heat shock protein from the acidothermophilic archaeon, Sulfolobus tokodaii strain 7

Small heat shock proteins (sHsps) are one of the most ubiquitous molecular chaperones. They are grouped together based on a conserved domain, the alpha-crystallin domain. Generally, sHsps exist as oligomers of 9-40 subunits, and the oligomers undergo reversible temperature-dependent dissociation into smaller species as dimers, which interact with denaturing substrate proteins. Previous studies have shown that the C-terminal region, especially the consensus IXI/V motif, is responsible for oligomer assembly. In this study, we examined deletions or mutations in the C-terminal region on the oligomer assembly and function of StHsp14.0, an sHsp from an acidothermophilic archaeon, Sulfolobus tokodaii strain 7. Mutated StHsp14.0 with C-terminal deletion or replacement of IIe residues in the IXI/V motif to Ala, Ser, or Phe residues could not form large oligomers and lost chaperone activity. StHsp14.0WKW, whose Ile residues in the IXI/V motif are changed to Trp, existed as an oligomer like that of the wild type. However, it dissociates to small oligomers and exhibits chaperone activity at relatively lowered temperature. Replacement of two Ile residues in the motif to relatively small residues, Ala or Ser, also resulted in the change of beta-sheet rich secondary structure and decrease of hydrophobicity. Interestingly, StHsp14.0 mutant with amino acid replacements to Phe kept almost the same secondary structure and relatively high hydrophobicity despite that it could not form an oligomeric structure. The results show that hydrophobicity and size of the amino acids in the IXI/V motif in the C-terminal region are responsible not only for assembly of the oligomer but also for the maintenance of beta-sheet rich secondary structure and hydrophobicity, which are important for the function of sHsp.     

Binding study of riboflavin-binding protein with riboflavin and its analogues by differential scanning calorimetry

Thermal unfolding parameters of hens' egg-white riboflavin-binding-protein (RBP) were measured by differential scanning calorimetry. Thermal denaturation scans of apoRBP and RBP complexes with riboflavin and its analogues (FMN, N10 DL-glyceryl isoalloxazine, and N10 -hydroxypentyl isoalloxazine) have been measured. It was found that ligand binding causes increase of RBP thermal stability, as manifested by a change of denaturation temperature from 60.8°C for apoRBP to 72.8°C for RBP—Rf complex. For RBP—FMN complex, the denaturation temperature of 73.0°C was even higher than for the RBP—Rf complex. The other two flavin analogues showed transition temperatures in between 66.9°C and 68.8°C, respectively. Analysis of excess heat capacity data showed that the best fit was the sum of two independent thermal transitions. One of the transitions, which contributed 70% to the total heat effect, has transition temperature in the broad range of 60.5–73.2°C; the other transition temperature is in the narrower range of 65.4–71.1°C. The observed transitions can be related to RBP domains.     

Enthalpy relaxation of bovine serum albumin and implications for its storage in the glassy state

Two endothermic peaks could be observed for five commercial samples of bovine serum albumin (BSA). The smaller peak observed by differential scanning calorimetry (DSC) corresponded to enthalpy relaxation. This peak was followed on storage of BSA, in its glassy state, after it had been heated above its denaturation temperature. Enthalpy and peak temperature increased with duration of storage. On storage for one week at 60 degrees C, a sample at 8.3% moisture showed a peak at 100 degrees C with an energy value of approximately 2 J per g protein. BSA samples were heated within the DSC sufficiently to eliminate the lower enthalpy peak but without altering the denaturation enthotherm. The amount of physical aging shown by these BSA samples was similar to that of the heat-denatured samples. It was concluded that the heating endotherms of dry BSA reflect both the storage and thermal history of the sample. Possible implications of the enthalpy relaxation of BSA on the behavior of this important protein are considered.     

Glass transition temperature of hard chairside reline materials after post‐polymerisation treatments

doi:10.1111/j.1741‐2358.2009.00312.x
Glass transition temperature of hard chairside reline materials after post‐polymerisation treatments Objective: This study evaluated the effect of post‐polymerisation treatments on the glass transition temperature (T_g) of five hard chairside reline materials (Duraliner II‐D, Kooliner‐K, New Truliner‐N, Ufi Gel hard‐U and Tokuso Rebase Fast‐T). Materials and methods: Specimens (10 × 10 × 1 mm) were made following the manufacturers’ instructions and divided into three groups (n = 5). Control group specimens were left untreated. Specimens from the microwave group were irradiated with pre‐determined power/time combinations, and specimens from the water‐bath group were immersed in hot water at 55°C for 10 min. Glass transition (°C) was performed by differential scanning calorimetry. Data were analysed using anova, followed by post hoc Tukey’s test (α = 0.05). Results: Both post‐polymerisation treatments promoted a significant (p < 0.05) increase in the T_g of reline material K. Materials K, D and N showed the lowest T_g (p < 0.05). No significant difference between T and U specimens was observed. Conclusion: Post‐polymerisation treatments improved the glass transition of material Kooliner, with the effect being more pronounced for microwave irradiation.     

Influence of precipitating agents on thermodynamic parameters of protein crystallization solutions

X‐ray crystallography is the most powerful method for determining three‐dimensional structures of proteins to (near‐)atomic resolution, but protein crystallization is a poorly explained and often intractable phenomenon. Differential Scanning Calorimetry was used to measure the thermodynamic parameters (ΔG, ΔH, ΔS) of temperature‐driven unfolding of two globular proteins, lysozyme, and ribonuclease A, in various salt solutions. The mixtures were categorized into those that were conducive to crystallization of the protein and those that were not. It was found that even fairly low salt concentrations had very large effects on thermodynamic parameters. High concentrations of salts conducive to crystallization stabilized the native folded forms of proteins, whereas high concentrations of salts that did not crystallize them tended to destabilize them. Considering the ΔH and TΔS contributions to the ΔG of unfolding separately, high concentrations of crystallizing salts were found to enthalpically stabilize and entropically destabilize the protein, and vice‐versa for the noncrystallizing salts. These observations suggest an explanation, in terms of protein stability and entropy of hydration, of why some salts are good crystallization agents for a given protein and others are not. This in turn provides theoretical insight into the process of protein crystallization, suggesting ways of predicting and controlling it. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 642–652, 2016.     

Natural selection for kinetic stability is a likely origin of correlations between mutational effects on protein energetics and frequencies of amino acid occurrences in sequence alignments

It appears plausible that natural selection constrains, to some extent at least, the stability in many natural proteins. If, during protein evolution, stability fluctuates within a comparatively narrow range, then mutations are expected to be fixed with frequencies that reflect mutational effects on stability. Indeed, we recently reported a robust correlation between the effect of 27 conservative mutations on the thermodynamic stability (unfolding free energy) of Escherichia coli thioredoxin and the frequencies of residues occurrences in sequence alignments. We show here that this correlation likely implies a lower limit to thermodynamic stability of only a few kJ/mol below the unfolding free energy of the wild-type (WT) protein. We suggest, therefore, that the correlation does not reflect natural selection of thermodynamic stability by itself, but of some other factor which is linked to thermodynamic stability for the mutations under study. We propose that this other factor is the kinetic stability of thioredoxin in vivo, since( i) kinetic stability relates to irreversible denaturation, (ii) the rate of irreversible denaturation in a crowded cellular environment (or in a harsh extracellular environment) is probably determined by the rate of unfolding, and (iii) the half-life for unfolding changes in an exponential manner with activation free energy and, consequently, comparatively small free energy effects can have deleterious consequences for kinetic stability. This proposal is supported by the results of a kinetic study of the WT form and the 27 single-mutant variants of E. coli thioredoxin based on the global analyses of chevron plots and equilibrium unfolding profiles determined from double-jump unfolding assays. This kinetic study suggests, furthermore, one of the factors that may contribute to the high activation free energy for unfolding in thioredoxin (required for kinetic stability), namely the energetic optimization of native-state residue environments in regions, which become disrupted in the transition state for unfolding.     

Thermodynamic consequences of burial of polar and non-polar amino acid residues in the protein interior

Effects of amino acid substitutions at four fully buried sites of the ubiquitin molecule on the thermodynamic parameters (enthalpy, Gibbs energy) of unfolding were evaluated experimentally using differential scanning calorimetry. The same set of substitutions has been incorporated at each of four sites. These substitutions have been designed to perturb packing (van der Waals) interactions, hydration, and/or hydrogen bonding. From the analysis of the thermodynamic parameters for these ubiquitin variants we conclude that: (i) packing of non-polar groups in the protein interior is favorable and is largely defined by a favorable enthalpy of van der Waals interactions. The removal of one methylene group from the protein interior will destabilize a protein by approximately 5 kJ/mol, and will decrease the enthalpy of a protein by 12 kJ/mol. (ii) Burial of polar groups in the non-polar interior of a protein is highly destabilizing, and the degree of destabilization depends on the relative polarity of this group. For example, burial of Thr side-chain in the non-polar interior will be less destabilizing than burial of Asn side-chain. This decrease in stability is defined by a large enthalpy of dehydration of polar groups upon burial. (iii) The destabilizing effect of dehydration of polar groups upon burial can be compensated if these buried polar groups form hydrogen bonding. The enthalpy of this hydrogen bonding will compensate for the unfavorable dehydration energy and as a result the effect will be energetically neutral or even slightly stabilizing.     

Effects of subclass change on the structural stability of chimeric,humanized, and human antibodies under thermal stress

To address how changes in the subclass of antibody molecules affect their thermodynamic stability, we prepared three types of four monoclonal antibody molecules (chimeric, humanized, and human) and analyzed their structural stability under thermal stress by using size‐exclusion chromatography, differential scanning calorimetry (DSC), circular dichroism (CD), and differential scanning fluoroscopy (DSF) with SYPRO Orange as a dye probe. All four molecules showed the same trend in change of structural stability; the order of the total amount of aggregates was IgG1 < IgG2 < IgG4. We thus successfully cross‐validated the effects of subclass change on the structural stability of antibodies under thermal stress by using four methods. The T_h values obtained with DSF were well correlated with the onset temperatures obtained with DSC and CD, suggesting that structural perturbation of the CH2 region could be monitored by using DSF. Our results suggested that variable domains dominated changes in structural stability and that the physicochemical properties of the constant regions of IgG were not altered, regardless of the variable regions fused.     

Synthesis and secretion of the mouse whey acidic protein in transgenic sheep

The synthesis of foreign proteins can be targeted to the mammary gland of transgenic animals, thus permitting commercial purification of otherwise unavailable proteins from milk. Genetic regulatory elements from the mouse whey acidic protein (WAP) gene have been used successfully to direct expression of transgenes to the mammary gland of mice, goats and pigs. To extend the practical usefulness of WAP promoter-driven fusion genes and further characterize WAP expression in heterologous species, we introduced a 6.8 kb DNA fragment containing the genomic form of the mouse WAP gene into sheep zygotes. Two lines of transgenic sheep were produced. The transgene was expressed in mammary tissue of both lines and intact WAP was secreted into milk at concentrations estimated to range from 100 to 500 mg/litre. Ectopic WAP gene expression was found in salivary gland, spleen, liver, lung, heart muscle, kidney and bone marrow of one founder ewe. WAP RNA was not detected in skeletal muscle and intestine. These data suggest that unlike pigs, sheep may possess nuclear factors in a variety of tissues that interact with WAP regulatory sequences. Though the data presented are based on only two lines, these findings suggest WAP regulatory sequences may not be suitable as control elements for transgenes in sheep bioreactors.     

Comparative structural stability of subunits of the potato virus X coat protein in solution and in virus particles

Several optical methods and differential scanning calorimetry were used to study the structure and stability of free coat protein (CP) molecules and CP molecules in the virion of the potato virus X (PVX), a filamentous plant virus. All criteria suggest that PVX CP (hereinafter, CP) subunits in solution at room temperature display a certain preserved tertiary structure; however, this structure is very unstable and already denatures at 35°C. Very low concentrations of sodium dodecylsulfate or cetyltrimethylammonium bromide also disrupt the CP tertiary structure, three-five molecules of these detergents per one protein molecule being sufficient. However, the secondary structure of CP molecules does not change under the same conditions. Once included into the virion, CP subunits become considerably more stable towards increased temperature and detergents. This combination of a highly labile tertiary structure and a fairly stable secondary structure of free CP can be a structural basis for the recently discovered ability of PVX CP to assume two distinct functional states within the virion.     

Effect of Ca2+ on thermotropic properties of saturated phosphatidylcholine liposomes

The effect of various concentrations of calcium ion (Ca²⁺) on dipalmitoylphosphatidylcholine (DPPC), distearoylphosphatidylcholine (DSPC) and mixed DPPC/DSPC (1:1) liposomes was studied by differential scanning calorimetry. Ca²⁺ concentrations of 10 mM and above split the main transition peak of DPPC into two distinguishable components, and, at 30 mM and above, also resulted in the disappearance of a pre-transition peak. The effect of Ca²⁺ on DSPC liposomes was even more dramatic in that it induced a more definitive split in the main transition peak and caused the loss of the pretransition peak at only 10 mM concentration. The thermograms of the DPPC/DSPC mixed liposomes were unaltered in the presence of Ca²⁺, even at a concentration of 50 mM. Whether or not Ca²⁺ is able to alter thermograms of phosphatidylcholine liposomes appears to be dependent on the degree of molecular order of the bilayer prior to interaction with Ca²⁺.     

Bovine lactoperoxidase - a versatile one- and two-electron catalyst of high structural and thermal stability

Lactoperoxidase (LPO), a member of the peroxidase-cyclooxygenase superfamily, is found in multiple human exocrine secretions and acts as a first line of defense against invading microorganisms by production of antimicrobial oxidants. Because of its ability to efficiently catalyze one- and two-electron oxidation reactions of inorganic and organic compounds, the heme peroxidase is widely used in food biotechnology, cosmetic industry, and diagnostic kits. In order to probe its structural integrity, conformational, and thermal stability, we have undertaken a comprehensive investigation by using complementary biophysical techniques including UV-Vis, circular dichroism and fluorescence spectroscopy as well as differential scanning calorimetry (DSC). The oxidoreductase exhibits a high chemical and thermal stability under oxidizing conditions but is significantly destabilized by addition of DTT. Due to its unique ester bonds between the prosthetic group and the protein as well as six intra-chain disulfides, unfolding of the central compact (-helical core occurs concomitantly with denaturation of the heme cavity. The corresponding enthalpic and entropic contributions to the free enthalpy of unfolding are presented. Together with spectroscopic data they will be discussed with respect to the known structure of bovine LPO and homologous myeloperoxidase as well as to its practical application.