Influence of Environmental Factors on Bacteriocin Production by Human Isolates of <Emphasis Type="Italic">Lactococcus lactis</Emphasis> MM19 and <Emphasis Type="Italic">Pediococcus acidilactici</Emphasis> MM33

The influence of temperature, initial pH, and carbon and nitrogen sources on bacteriocin secreted by Lactococcus lactis MM19 (MM19) and Pediococcus acidilactici MM33 (MM33) was evaluated. It was found that 30 and 45 °C were the growth temperatures for higher nisin and pediocin production by MM19 and MM33, respectively. The initial pH values for higher production of nisin and pediocin were 9 and 6, respectively. Glucose and wheat peptone E430 were found as suitable carbon and nitrogen sources, respectively, for highest nisin production by MM19 at 30 °C and initial pH of 9. In these conditions, nisin production could be increased by 6.7 times as compared to the control medium (de Man, Rogosa, and Sharpe—MRS broth). Similarly, fructose and pea peptone were suitable carbon and nitrogen sources, respectively, for highest production of pediocin by MM33 at 45 °C and initial pH of 6. In these conditions, pediocin production by MM33 was increased by three times as compared to the control medium (tryptone-glucose-yeast extract—TGE broth).     

Improved Biosurfactant Production by Enterobacter cloacae B14, Stability Studies,and its Antimicrobial Activity

This work aimed to optimize carbon and nitrogen sources for the growth of Enterobacter cloacae B14 and its biosurfactant (BS) production via One-Variable-At-a-Time (OVAT) method. The BS stability under a range of pH and temperatures was assessed. Antimicrobial activity against Gram-positive and Gram-negative pathogens was determined by the agar well diffusion method. The results showed that the optimum carbon and nitrogen sources for BS production were maltose and yeast extract, respectively, with a maximum BS yield of (39.8 ± 5.2) mg BS/g biomass. The highest emulsification activity (E24) was 79%, which is significantly higher than in the previous studies. We found that B14 BS can withstand a wide range of pH values from 2 to10. It could also function under a range of temperatures from 30–37°C. Thin Layer Chromatography (TLC) and Fourier Transform Infrared Spectrometry (FTIR) analysis confirmed that B14 BS is a glycolipid-like compound, which is rarely found in Enterobacter spp. Cell-free broth showed inhibition against various pathogens, preferable to Gram-positive ones. It had better antimicrobial activity against Bacillus subtilis than a commonly-used antibiotic, tetracycline. Furthermore, B14 broth could inhibit the growth of a tetracycline-resistant Serratia marcescens. Our results showed promising B14 BS applications not only for bioremediation but also for the production of antimicrobial products.Key words: biosurfactant, cultivation media, Enterobacter cloacae, antimicrobial activity, stability     

Production and characterization of cellulases and hemicellulases by Acremonium cellulolyticus using rice straw subjected to various pretreatments as the carbon source

Cellulases and hemicellulases are key enzymes in the production of alternative fuels and chemicals from lignocellulosic biomass-an abundant renewable resource. Carbon source selection is an important factor in the production of cellulases and hemicellulases. Rice straw--a potential ethanol source--has recently gained considerable interest in Asian countries. Here, we investigated the production of cellulases by using rice straw subjected to various pretreatments as substrates in order to produce cellulases at low costs; we also identified the enzymes' characteristics. Rice straw cutter milled to <3mm was pretreated by wet disk milling, dry ball milling, or hot-compressed water treatment (HCWT). Pretreated rice straw and commercial cellulose, Solka Floc (SF), were used as carbon sources for cellulase production by the fungus Acremonium cellulolyticus. Filter paper cellulase, β-xylanase, and β-xylosidase production from ball- and disk-milled samples were higher than those from SF. Enzymatic activity was absent in cultures where HCWT rice straw was used as carbon source. Wet disk-milled rice straw cultures were more suitable for enzymatic hydrolysis of pretreated rice straw than SF cultures. Thus, wet disk milling may be a suitable pretreatment for producing substrates for enzymatic hydrolysis and generating inexpensive carbon sources for cellulase production.     

A novel high molecular weight thermo-acidoactive β-glucosidase from <Emphasis Type="Italic">Beauveria bassiana</Emphasis>

An extracellular high molecular weight β-glucosidase was secreted by a local strain P1 of Beauveria bassiana. The enzyme was produced in the presence of various carbon sources, namely glucose, maltose, lactose, glycerol, starch, wheat bran and gruel. The highest level of β-glucosidase activity was produced with wheat bran at the concentration of 3%. Glucose caused a repressor effect on the β-glucosidase expression in a dose-dependent manner. The highest enzyme production level was obtained at initial pH of 6.0 and 7.0 in the culture medium. The zymography analysis revealed that B. bassiana secreted a β-glucosidase with high molecular weight between 400 and 600 kDa. The enzymatic preparation was characterized and showed temperature and pH optima of 55°C and 5.0, respectively. The enzyme was stable at 40 and 50°C but its stability declined at 60°C. Interestingly, this β-glucosidase had high stability at acid and basic pH saving its initial activity after 24 h incubation at pH from 3.0 to 11.0. It was stable also in presence of monovalent Na⁺ and K⁺ ions saving 60% of its initial activity at 2 M salts. Bivalent metal ions preserved totally or partially the enzymatic activity; in addition, Ba²⁺ was revealed as an activator. This is the first report that focuses on the production and the biochemical characterization of a β-glucosidase from the entomopathogenic fungus, B. bassiana.     

Folate Production by Bifidobacteria as a Potential Probiotic Property

The ability of 76 Bifidobacterium strains to produce folate was investigated. In order to evaluate folic acid productivity, bifidobacteria were cultivated in the folate-free semisynthetic medium SM7. Most of the tested strains needed folate for growth. The production and the extent of vitamin accumulation were not a function of species but were distinctive features of individual strains. Six strains among the 17 that grew without folate produced significantly higher concentrations of vitamin (between 41 and 82 ng ml⁻¹). The effects of exogenous folate and p-aminobenzoic acid (PABA) concentrations on folate production were evaluated. In contrast to most of the other strains, the folate yield of B. adolescentis MB 239 was not negatively affected by either PABA or exogenous folic acid. Folate production by B. adolescentis MB 239 was studied in the pH range of the colonic environment, and a comparison of folate production on raffinose, lactose, and fructo-oligosaccharides, which belong to three important groups of fermentable intestinal carbon sources, was established. Differences in folate biosynthesis by B. adolescentis MB 239 were not observed as a function either of the pH or of the carbon source. Fecal culture experiments demonstrated that the addition of B. adolescentis MB 239 may increase the folate concentration in the colonic environment.     

Influence of pH on the production of xylanases by Trichoderma reesei Rut C-30

Trichoderma reesei Rut C-30 was cultivated in bioreactors at different pH on a medium with lactose as the main carbon source. Compared to an earlier study, in which T. reesei Rut C-30 was cultivated using polysaccharides (cellulose or xylan) as the main carbon sources, we now report a slightly lower pH value for maximal xylanase levels. The highest xylanase activity (IU/ml) on the lactose-based medium was observed at pH 6.0 compared to pH 7.0 on the polysaccharide-based media. When the pattern of different xylanases was analyzed by isoelectric focusing and activity zymogram, we observed that a low pH (4.0) favoured the production of xylanase I, whilst a high pH (6.0) favoured the production of xylanase III. Xylanase II was clearly produced at both pH values. The results at pH 4 and 6 correlate with the pH activity profiles of xylanase I, II and III. Hence, the different T. reesei xylanases were produced according to which enzyme is most active in that particular environment.     

Glycosylation and production characteristics of epothilones in alkali-tolerant <Emphasis Type="Italic">Sorangium cellulosum</Emphasis> strain So0157-2

3-O-α-D-ribofuranosyl epothilone A (epothiloneoside A) is a major component of glycosylated epothilones in Sorangium cellulosum strain So0157-2. The production and glycosylation ratios of epothiloneoside A in both solid and liquid culture conditions with various pH values and carbon sources were studied. The results showed that glycosylation occurs whenever epothilones are produced, regardless of changes in pH values, production time curves, and different carbon sources. We suggest that glycosylation is a stable process, paralleling the biosynthesis of epothilones in the So0157-2 strain.     

Effects of carbon and nitrogen sources,carbon-to-nitrogen ratio,and initial pH on the growth of nematophagous fungus <Emphasis Type="Italic">Pochonia chlamydosporia</Emphasis> in liquid culture

The effects of carbon and nitrogen sources, carbon-to-nitrogen ratio (C:N) and initial pH value on the growth and sporulation of the nematophagous fungus Pochonia chlamydosporia in liquid culture were examined. Among the 21 carbon sources and 15 nitrogen compounds tested, the optimal carbon and nitrogen sources for mycelial growth were sweet potato and L-tyrosine, and for sporulation were sweet potato and casein peptone. A C:N ratio of 10:1 at pH 3.7 gave the maximum yield of conidia and a C:N ratio of 40:1 at pH 6.8 gave the maximum biomass. The initial pH value had a significant effect on mycelial growth and conidial production, with the optimal ranges being 3.5–4.5 for sporulation and 5–6 for growth. Maximum conidial production was obtained at an initial pH of 4.0 and the maximum biomass at pH 6.0. The results also showed that the final pH after 7 days cultivation was always higher than the initial value. The variability in growth and sporulation of seven strains of P. chlamydosporia in liquid culture was also compared and discussed.     

Screening and optimization of protease production from a halotolerant Bacillus licheniformis isolated from saltern sediments

Protease producing halotolerant bacterium was isolated from saltern pond sediment (Tuticorin) and identified as Bacillus licheniformis (TD4) by 16S rRNA gene sequencing. Protease production was enhanced by optimizing the culture conditions. The nutritional factors such as carbon and nitrogen sources, NaCl and also physical parameters like incubation time, pH, agitation, inoculum size were optimized for the maximum yield of protease. Studies on the effect of different carbon and nitrogen sources revealed that xylose and urea enhances the enzyme production. Thus, with selected C–N sources along with 1 M NaCl the maximum protease production (141.46 U/mg) was obtained in the period of 24 h incubation at pH 8 under 250 rpm compared to the initial enzyme production (89.87 U/mg).     

Effective technological pectinases by Aspergillus carneus NRC1 utilizing the Egyptian orange juice industry scraps

The production of a notable and highly effective pectinase by the local fungal strain Aspergillus carneus NRC1 utilizing the abundant Egyptian orange peels and pulps (OPP) scraps excluded in the orange juice and canning industry was achieved in 5-day submerged fermentation (SMF) cultures, at temperature and pH ranges of 30–55 °C and 5.0–5.5, respectively. Fresh or thawed OPP (6%, w/v) were the most preferable sole carbon source. Pectinase activity was dramatically stimulated by ammonium sulphate as the sole nitrogen source, and at the same time strongly inhibited the production of the other tested enzymes, i.e., cellulases and hemicellulases. The lyophilized enzyme preparation was free from any ochra or aflatoxins. The optimum conditions of this methodology including enzyme and substrate (citrus pectin) concentrations were 40 mg ml^?1 and 7% (w/v), respectively, with pH and temperature of 4.0 and 55 °C, respectively.     

Influence of cultivation conditions on production of lignocellulolytic enzymes by Ceriporiopsis subvermispora

The aim of this work was to make a survey describing factors that influence the production of extracellular enzymes by white-rot fungus Ceriporiopsis subvermispora responsible for the degradation of lignocellulolytic materials. These factors were: carbon sources (glucose, cellulose, hemicellulose, lignin, maltose and starch), nitrogen sources (ammonium sulphate, potassium nitrate, urea, albumin and peptone), pH, temperature and addition of three different concentrations of Cu²⁺ and Mn²⁺. The cellulase and xylanase activities were similar in medium with different carbon sources and the highest cellulase and xylanase activities were measured in medium with urea and potassium nitrate as nitrogen sources, respectively. The highest laccase activity was observed in medium with lignin and peptone as carbon and nitrogen sources. In other experiments, time course of production of lignocellulolytic enzymes by white-rot fungus C. subvermispora in medium with lignin or glucose as carbon sources was observed.     

Medium optimization of antifungal lipopeptide,iturin A,production by <Emphasis Type="Italic">Bacillus subtilis</Emphasis> in solid-state fermentation by response surface methodology

Iturin A, a lipopeptide antibiotic produced by Bacillus subtilis RB14-CS, suppresses the growth of various plant pathogens. Here, enhancement of iturin A production in solid-state fermentation (SSF) on okara, a soybean curd residue produced during tofu manufacturing, was accomplished using statistical experimental design. Primary experiments showed that the concentrations of carbon and nitrogen sources were the main factors capable of enhancing iturin A production, whereas initial pH, initial water content, temperature, relative humidity, and volume of inoculum were only minor factors. Glucose and soybean meal were the most effective among tested carbon and nitrogen sources, respectively. Based on these preliminary findings, response surface methodology was applied to predict the optimum amounts of the carbon and nitrogen sources in the medium. The maximum iturin A concentration was 5,591 μg/g initial wet okara under optimized condition. Subsequent experiments confirmed that iturin A production was significantly improved under the predicted optimal medium conditions. The SSF product generated under the optimized conditions exhibited significantly higher suppressive effect on the damping-off of tomato caused by Rhizoctonia solani K-1 compared with the product generated under the non-optimized conditions.     

Production of Rifamycin using Amycolatopsis mediterranei (MTCC14)

Production of Rifamycin with Amycolatopsis mediterranei (MTCC14) was studied using carbon and locally available cheaper nitrogen sources. A. Mediterranei gave initial yield of 650 mg/l with standard fermentation medium. This was improved to 1400 mg/l by using various Carbon, Nitrogen sources and optimizing various cultural conditions. Glucose, Ammonium sulphate and combination of soya bean and pea nut meals were found to induce more Rifamycin production in 7 days with a pH of 7.2, temperature 28v°C.     

Purification,structural characterization and biotechnological potential of tannase enzyme produced by Enterobacter cloacae strain 41

Tannase production by Enterobacter cloacae strain 41 was investigated under submerged fermentation which was optimized at various circumstances such as pH, temperature, substrate, and agitation, carbon, and nitrogen sources. Tannase was purified by a two-step approach comprising of ion exchange and size exclusion chromatography, respectively. The maximum tannase production was achieved at 1.0% tannic acid concentration, incubation temperature of 50 °C, and initial pH 6.0. The molecular weight of purified tannase was 45 kDa on 10% SDS-PAGE, and it was confirmed by matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry (MS). The enzymatic products of purified tannase were characterized by HPLC, TLC and FT-IR spectroscopy which showed the functional groups such as OH, CO, and CC. The purified tannase retained the activity up to 90% under the condition at 50 °C and pH 6.0 after 1 h incubation. Enzyme kinetics and inhibition studies were also investigated. Cytotoxicity studies showed that the tannase has no cytotoxic effects on Vero cell line. The results indicated the E. cloacae strain 41 would give a potential source for the efficient production of tannase and can be used in tannery effluent degradation, food, and pharmaceutical industrial applications.     

Carbon Catabolite Repression-Independent and pH-Dependent Production of Indoles by Rubrivivax benzoatilyticus JA2

Rubrivivax benzoatilyticus JA2 produces indole derivatives (indoles) from aniline, anthranilate or l-tryptophan. Glucose repressed indole production in R. benzoatilyticus JA2, while malate had no effect. Growth of R. benzoatilyticus JA2 on glucose resulted in decrease in culture pH (6.4) compared with malate (8.4). Growth of R. benzoatilyticus JA2 on sugar carbon sources decreased culture pH (6.4–6.6) and indole production. Further, culture pH of 6.4 repressed the indole production, and pH 8.4 promoted the production irrespective of carbon sources used for growth. Moreover, correlation between indole production and culture pH was observed, where acidic pH inhibited indole production, while alkaline pH promoted the production, suggesting the role of pH in indole production. Tryptophan-catabolizing enzyme activities are significantly high in malate-grown cultures (pH 8.4) compared with that of the glucose (pH 6.4)-grown cultures and corroborated well with indole production, indicating their role in indole production. These results confirm that indole production in R. benzoatilyticus JA2 is pH dependent rather than carbon catabolite repression.     

Fermentative production of spiramycins

Fermentative production of spiramycins by Streptomyces ambofaciens has been performed using fermentation media of different chemical compositions. Medium I was selected from nine media as the best for production of high titres of spiramycins. Biochemical changes which occurred during fermentative production of spiramycins revealed that adjustment of the initial pH value of the medium was very important. The initial pH value of the fermentation medium which allowed the organism to produce a good yield of antibiotic was 6.5. The fermentation period affected the formation of spiramycins, and the maximum incubation period required for the fermentation process was 120 h. The role of inoculum on spiramycin yield showed that it was better to inoculate the fermentation medium with vegetative cells of Streptomyces ambofaciens rather with spores. The carbon source influenced spiramycin biosynthesis: dextrin was the best carbon source and stimulated the organism to form high titres of antibiotics. The best concentrations of dextrin and glucose for increased antibiotic yields were 25 and 15 gl^?1, respectively. Organic sources in the fermentation medium were more efficient than inorganic nitrogen sources for spiramycin formation. Fodder yeast was the best organic nitrogen source in fermentative production of spiramycins. The maximal concentrations of fodder yeast, soybean meal, peptone, Ca(NO₃)₂ and NH₄NO₃ for increased antibiotic yield were 6.5, 6.0, 4.0, 10.0 and 4.0 gl^?1, respectively.     

Production of Chitinases and β-1,3-Glucanases by Stachybotrys elegans, a Mycoparasite of Rhizoctonia solani

The in vitro production of chitinases and β-1,3-glucanases by Stachybotrys elegans, a mycoparasite of Rhizoctonia solani, was examined under various culture conditions, such as carbon and nitrogen sources, pH, and incubation period. Production of both enzymes was influenced by the carbon source incorporated into the medium and was stimulated by acidic pH and NaNO₃. The activity of both enzymes was very low in culture filtrates from cells grown on glucose and sucrose compared with that detected on chitin (for chitinases) and cell wall fragments (for β-1,3-glucanases). Protein electrophoresis revealed that, depending on the carbon source used, different isoforms of chitinases and β-1,3-glucanases were detected. S. elegans culture filtrates, possessing β-1,3-glucanase and chitinase activities, were capable of degrading R. solani mycelium.     

A thermostable lipase produced by a newly isolated <Emphasis Type="Italic">Geotrichum</Emphasis>-like strain,R59

Growth and production of lipase by a new Geotrichum-like strain, R59, were studied. Production of extracellular lipase was substantially enhanced when the initial pH of the culture medium, types of carbon and nitrogen sources, substances probably stimulating the lipase biosynthesis, the temperature, and time of growth were optimized. Sucrose and triolein were the most effective carbon sources for lipase production. Maximum lipase activity (146 U/ml^–1) was obtained with urea as the nitrogen source. Growth at 30°C, an initial pH of 6.0 and incubation time of 48 h were found as optimum conditions for cell growth and production of lipase by Geotrichum-like strain R59. The enzyme was thermostable and exhibited very high activity after 1 h incubation at 60°C.